[PATCH AUTOSEL 5.4 01/16] cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist

[PATCH AUTOSEL 5.4 01/16] cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist

[Sasha Levin]

From: Sumit Gupta <sumitg@nvidia.com>

[ Upstream commit 01c5bb0cc2a39fbc56ff9a5ef28b79447f0c2351 ]

Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 1200842c3da4..5d28553b69f5 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -126,6 +126,7 @@ static const struct of_device_id blacklist[] __initconst = {
 
 	{ .compatible = "nvidia,tegra124", },
 	{ .compatible = "nvidia,tegra210", },
+	{ .compatible = "nvidia,tegra234", },
 
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
-- 
2.35.1

[PATCH AUTOSEL 5.4 02/16] ASoC: fsl_micfil: Correct the number of steps on SX controls

[Sasha Levin]

From: Chancel Liu <chancel.liu@nxp.com>

[ Upstream commit cdfa92eb90f5770b26a79824ef213ebdbbd988b1 ]

The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104025754.3019235-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_micfil.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index f7f2d29f1bfe..b33746d58633 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -87,21 +87,21 @@ static DECLARE_TLV_DB_SCALE(gain_tlv, 0, 100, 0);
 
 static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = {
 	SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(0), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(1), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(2), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(3), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(4), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(5), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(6), 0x8, 0xF, gain_tlv),
 	SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL,
-			  MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv),
+			  MICFIL_OUTGAIN_CHX_SHIFT(7), 0x8, 0xF, gain_tlv),
 	SOC_ENUM_EXT("MICFIL Quality Select",
 		     fsl_micfil_quality_enum,
 		     snd_soc_get_enum_double, snd_soc_put_enum_double),
-- 
2.35.1

[PATCH AUTOSEL 5.4 03/16] drm: Add orientation quirk for Lenovo ideapad D330-10IGL

[Sasha Levin]

From: Patrick Thompson <ptf@google.com>

[ Upstream commit 0688773f0710528e1ab302c3d6317e269f2e2e6e ]

Panel is 800x1280 but mounted on a detachable form factor sideways.

Signed-off-by: Patrick Thompson <ptf@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220205826.178008-1-ptf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index ca0fefeaab20..ce739ba45c55 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -272,6 +272,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
 		},
 		.driver_data = (void *)&lcd1200x1920_rightside_up,
+	}, {	/* Lenovo Ideapad D330-10IGL (HD) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGL"),
+		},
+		.driver_data = (void *)&lcd800x1280_rightside_up,
 	}, {	/* Lenovo Yoga Book X90F / X91F / X91L */
 		.matches = {
 		  /* Non exact match to match all versions */
-- 
2.35.1

[PATCH AUTOSEL 5.4 04/16] s390/debug: add _ASM_S390_ prefix to header guard

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit 0d4d52361b6c29bf771acd4fa461f06d78fb2fac ]

Using DEBUG_H without a prefix is very generic and inconsistent with
other header guards in arch/s390/include/asm. In fact it collides with
the same name in the ath9k wireless driver though that depends on !S390
via disabled wireless support. Let's just use a consistent header guard
name and prevent possible future trouble.

Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/debug.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 310134015541..54f4bc5d1108 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -4,8 +4,8 @@
  *
  *    Copyright IBM Corp. 1999, 2000
  */
-#ifndef DEBUG_H
-#define DEBUG_H
+#ifndef _ASM_S390_DEBUG_H
+#define _ASM_S390_DEBUG_H
 
 #include <linux/string.h>
 #include <linux/spinlock.h>
@@ -416,4 +416,4 @@ int debug_unregister_view(debug_info_t *id, struct debug_view *view);
 #define PRINT_FATAL(x...)	printk(KERN_DEBUG PRINTK_HEADER x)
 #endif /* DASD_DEBUG */
 
-#endif /* DEBUG_H */
+#endif /* _ASM_S390_DEBUG_H */
-- 
2.35.1

[PATCH AUTOSEL 5.4 05/16] arm64/mm: Define dummy pud_user_exec() when using 2-level page-table

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit 4e4ff23a35ee3a145fbc8378ecfeaab2d235cddd ]

With only two levels of page-table, the generic 'pud_*' macros are
implemented using dummy operations in pgtable-nopmd.h. Since commit
730a11f982e6 ("arm64/mm: add pud_user_exec() check in
pud_user_accessible_page()"), pud_user_accessible_page() unconditionally
calls pud_user_exec(), which is an arm64-specific helper and therefore
isn't defined by pgtable-nopmd.h. This results in a build failure for
configurations with only two levels of page table:

   arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':
>> arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]
     870 |         return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
         |                                                   ^~~~~~~~~~~~~
         |                                                   pmd_user_exec

Fix the problem by defining pud_user_exec() as pud_user() in this case.

Link: https://lore.kernel.org/r/202301080515.z6zEksU4-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 3a057d427900..68d5fbbd0f8a 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -588,6 +588,7 @@ static inline phys_addr_t pud_page_paddr(pud_t pud)
 #else
 
 #define pud_page_paddr(pud)	({ BUILD_BUG(); 0; })
+#define pud_user_exec(pud)	pud_user(pud) /* Always 0 with folding */
 
 /* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */
 #define pmd_set_fixmap(addr)		NULL
-- 
2.35.1

Re: [PATCH AUTOSEL 5.4 05/16] arm64/mm: Define dummy pud_user_exec() when using 2-level page-table

[Catalin Marinas]

On Mon, Jan 16, 2023 at 09:05:08AM -0500, Sasha Levin wrote:
> From: Will Deacon <will@kernel.org>
> 
> [ Upstream commit 4e4ff23a35ee3a145fbc8378ecfeaab2d235cddd ]
> 
> With only two levels of page-table, the generic 'pud_*' macros are
> implemented using dummy operations in pgtable-nopmd.h. Since commit
> 730a11f982e6 ("arm64/mm: add pud_user_exec() check in
> pud_user_accessible_page()"), pud_user_accessible_page() unconditionally
> calls pud_user_exec(), which is an arm64-specific helper and therefore
> isn't defined by pgtable-nopmd.h. This results in a build failure for
> configurations with only two levels of page table:
> 
>    arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':
> >> arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]
>      870 |         return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
>          |                                                   ^~~~~~~~~~~~~
>          |                                                   pmd_user_exec
> 
> Fix the problem by defining pud_user_exec() as pud_user() in this case.
> 
> Link: https://lore.kernel.org/r/202301080515.z6zEksU4-lkp@intel.com
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Will Deacon <will@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

I don't think this patch should be backported to 5.4. It is a fix for a
commit that went in shortly before this one (730a11f982e6). The latter
commit does have a Fixes tag but I guess Will thought it's not worth a
cc stable (and it's up to 5.19 anyway).

-- 
Catalin

Re: [PATCH AUTOSEL 5.4 05/16] arm64/mm: Define dummy pud_user_exec() when using 2-level page-table

[Sasha Levin]

On Mon, Jan 16, 2023 at 06:30:47PM +0000, Catalin Marinas wrote:
>On Mon, Jan 16, 2023 at 09:05:08AM -0500, Sasha Levin wrote:
>> From: Will Deacon <will@kernel.org>
>>
>> [ Upstream commit 4e4ff23a35ee3a145fbc8378ecfeaab2d235cddd ]
>>
>> With only two levels of page-table, the generic 'pud_*' macros are
>> implemented using dummy operations in pgtable-nopmd.h. Since commit
>> 730a11f982e6 ("arm64/mm: add pud_user_exec() check in
>> pud_user_accessible_page()"), pud_user_accessible_page() unconditionally
>> calls pud_user_exec(), which is an arm64-specific helper and therefore
>> isn't defined by pgtable-nopmd.h. This results in a build failure for
>> configurations with only two levels of page table:
>>
>>    arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':
>> >> arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]
>>      870 |         return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
>>          |                                                   ^~~~~~~~~~~~~
>>          |                                                   pmd_user_exec
>>
>> Fix the problem by defining pud_user_exec() as pud_user() in this case.
>>
>> Link: https://lore.kernel.org/r/202301080515.z6zEksU4-lkp@intel.com
>> Reported-by: kernel test robot <lkp@intel.com>
>> Signed-off-by: Will Deacon <will@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>I don't think this patch should be backported to 5.4. It is a fix for a
>commit that went in shortly before this one (730a11f982e6). The latter
>commit does have a Fixes tag but I guess Will thought it's not worth a
>cc stable (and it's up to 5.19 anyway).

Ack, I'll drop it.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.4 06/16] cpufreq: armada-37xx: stop using 0 as NULL pointer

[Sasha Levin]

From: Miles Chen <miles.chen@mediatek.com>

[ Upstream commit 08f0adb193c008de640fde34a2e00a666c01d77c ]

Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer

Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/armada-37xx-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 2de7fd18f66a..f0be8a43ec49 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -443,7 +443,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
 		return -ENODEV;
 	}
 
-	clk = clk_get(cpu_dev, 0);
+	clk = clk_get(cpu_dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
 		return PTR_ERR(clk);
-- 
2.35.1

[PATCH AUTOSEL 5.4 07/16] ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 8c6a42b5b0ed6f96624f56954e93eeae107440a6 ]

The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.

Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl-asoc-card.c | 8 ++++----
 sound/soc/fsl/fsl_ssi.c       | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 39ea9bda1394..d78eb9f9d24c 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -112,11 +112,11 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static const struct snd_soc_dapm_route audio_map_ac97[] = {
 	/* 1st half -- Normal DAPM routes */
-	{"Playback",  NULL, "AC97 Playback"},
-	{"AC97 Capture",  NULL, "Capture"},
+	{"Playback",  NULL, "CPU AC97 Playback"},
+	{"CPU AC97 Capture",  NULL, "Capture"},
 	/* 2nd half -- ASRC DAPM routes */
-	{"AC97 Playback",  NULL, "ASRC-Playback"},
-	{"ASRC-Capture",  NULL, "AC97 Capture"},
+	{"CPU AC97 Playback",  NULL, "ASRC-Playback"},
+	{"ASRC-Capture",  NULL, "CPU AC97 Capture"},
 };
 
 /* Add all possible widgets into here without being redundant */
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index ed18bc69e095..0ab35c3dc7d2 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1147,14 +1147,14 @@ static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
 	.symmetric_channels = 1,
 	.probe = fsl_ssi_dai_probe,
 	.playback = {
-		.stream_name = "AC97 Playback",
+		.stream_name = "CPU AC97 Playback",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_8000_48000,
 		.formats = SNDRV_PCM_FMTBIT_S16 | SNDRV_PCM_FMTBIT_S20,
 	},
 	.capture = {
-		.stream_name = "AC97 Capture",
+		.stream_name = "CPU AC97 Capture",
 		.channels_min = 2,
 		.channels_max = 2,
 		.rates = SNDRV_PCM_RATE_48000,
-- 
2.35.1

[PATCH AUTOSEL 5.4 08/16] ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 242fc66ae6e1e2b8519daacc7590a73cd0e8a6e4 ]

The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.

Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl-asoc-card.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index d78eb9f9d24c..db663e7d17a4 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -112,8 +112,8 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static const struct snd_soc_dapm_route audio_map_ac97[] = {
 	/* 1st half -- Normal DAPM routes */
-	{"Playback",  NULL, "CPU AC97 Playback"},
-	{"CPU AC97 Capture",  NULL, "Capture"},
+	{"AC97 Playback",  NULL, "CPU AC97 Playback"},
+	{"CPU AC97 Capture",  NULL, "AC97 Capture"},
 	/* 2nd half -- ASRC DAPM routes */
 	{"CPU AC97 Playback",  NULL, "ASRC-Playback"},
 	{"ASRC-Capture",  NULL, "CPU AC97 Capture"},
-- 
2.35.1

[PATCH AUTOSEL 5.4 09/16] spi: spidev: fix a race condition when accessing spidev->spi

[Sasha Levin]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]

There's a spinlock in place that is taken in file_operations callbacks
whenever we check if spidev->spi is still alive (not null). It's also
taken when spidev->spi is set to NULL in remove().

This however doesn't protect the code against driver unbind event while
one of the syscalls is still in progress. To that end we need a lock taken
continuously as long as we may still access spidev->spi. As both the file
ops and the remove callback are never called from interrupt context, we
can replace the spinlock with a mutex.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index be503a0e6ef7..a360dabdcb8b 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -66,7 +66,7 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS);
 
 struct spidev_data {
 	dev_t			devt;
-	spinlock_t		spi_lock;
+	struct mutex		spi_lock;
 	struct spi_device	*spi;
 	struct list_head	device_entry;
 
@@ -93,9 +93,8 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	int status;
 	struct spi_device *spi;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spidev->spi;
-	spin_unlock_irq(&spidev->spi_lock);
 
 	if (spi == NULL)
 		status = -ESHUTDOWN;
@@ -105,6 +104,7 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
 	if (status == 0)
 		status = message->actual_length;
 
+	mutex_unlock(&spidev->spi_lock);
 	return status;
 }
 
@@ -355,12 +355,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* use the buffer lock here for triple duty:
 	 *  - prevent I/O (from us) so calling spi_setup() is safe;
@@ -485,6 +485,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -506,12 +507,12 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 	 * we issue this ioctl.
 	 */
 	spidev = filp->private_data;
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spi = spi_dev_get(spidev->spi);
-	spin_unlock_irq(&spidev->spi_lock);
-
-	if (spi == NULL)
+	if (spi == NULL) {
+		mutex_unlock(&spidev->spi_lock);
 		return -ESHUTDOWN;
+	}
 
 	/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
 	mutex_lock(&spidev->buf_lock);
@@ -538,6 +539,7 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
 done:
 	mutex_unlock(&spidev->buf_lock);
 	spi_dev_put(spi);
+	mutex_unlock(&spidev->spi_lock);
 	return retval;
 }
 
@@ -616,10 +618,10 @@ static int spidev_release(struct inode *inode, struct file *filp)
 	spidev = filp->private_data;
 	filp->private_data = NULL;
 
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	/* ... after we unbound from the underlying device? */
 	dofree = (spidev->spi == NULL);
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	/* last close? */
 	spidev->users--;
@@ -746,7 +748,7 @@ static int spidev_probe(struct spi_device *spi)
 
 	/* Initialize the driver data */
 	spidev->spi = spi;
-	spin_lock_init(&spidev->spi_lock);
+	mutex_init(&spidev->spi_lock);
 	mutex_init(&spidev->buf_lock);
 
 	INIT_LIST_HEAD(&spidev->device_entry);
@@ -791,9 +793,9 @@ static int spidev_remove(struct spi_device *spi)
 	/* prevent new opens */
 	mutex_lock(&device_list_lock);
 	/* make sure ops on existing fds can abort cleanly */
-	spin_lock_irq(&spidev->spi_lock);
+	mutex_lock(&spidev->spi_lock);
 	spidev->spi = NULL;
-	spin_unlock_irq(&spidev->spi_lock);
+	mutex_unlock(&spidev->spi_lock);
 
 	list_del(&spidev->device_entry);
 	device_destroy(spidev_class, spidev->devt);
-- 
2.35.1

[PATCH AUTOSEL 5.4 10/16] spi: spidev: remove debug messages that access spidev->spi without locking

[Sasha Levin]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

[ Upstream commit 6b35b173dbc1711f8d272e3f322d2ad697015919 ]

The two debug messages in spidev_open() dereference spidev->spi without
taking the lock and without checking if it's not null. This can lead to
a crash. Drop the messages as they're not needed - the user-space will
get informed about ENOMEM with the syscall return value.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index a360dabdcb8b..74d13de15ca0 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -579,7 +579,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->tx_buffer) {
 		spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->tx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_find_dev;
 		}
@@ -588,7 +587,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
 	if (!spidev->rx_buffer) {
 		spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
 		if (!spidev->rx_buffer) {
-			dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
 			status = -ENOMEM;
 			goto err_alloc_rx_buf;
 		}
-- 
2.35.1

[PATCH AUTOSEL 5.4 11/16] KVM: s390: interrupt: use READ_ONCE() before cmpxchg()

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 42400d99e9f0728c17240edb9645637ead40f6b9 ]

Use READ_ONCE() before cmpxchg() to prevent that the compiler generates
code that fetches the to be compared old value several times from memory.

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/interrupt.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 8be5750fe5ac..a180fe54dc68 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -81,8 +81,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
 		struct esca_block *sca = vcpu->kvm->arch.sca;
 		union esca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union esca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+		union esca_sigp_ctrl new_val = {0}, old_val;
 
+		old_val = READ_ONCE(*sigp_ctrl);
 		new_val.scn = src_id;
 		new_val.c = 1;
 		old_val.c = 0;
@@ -93,8 +94,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
 		struct bsca_block *sca = vcpu->kvm->arch.sca;
 		union bsca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union bsca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+		union bsca_sigp_ctrl new_val = {0}, old_val;
 
+		old_val = READ_ONCE(*sigp_ctrl);
 		new_val.scn = src_id;
 		new_val.c = 1;
 		old_val.c = 0;
@@ -124,16 +126,18 @@ static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
 		struct esca_block *sca = vcpu->kvm->arch.sca;
 		union esca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union esca_sigp_ctrl old = *sigp_ctrl;
+		union esca_sigp_ctrl old;
 
+		old = READ_ONCE(*sigp_ctrl);
 		expect = old.value;
 		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
 	} else {
 		struct bsca_block *sca = vcpu->kvm->arch.sca;
 		union bsca_sigp_ctrl *sigp_ctrl =
 			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
-		union bsca_sigp_ctrl old = *sigp_ctrl;
+		union bsca_sigp_ctrl old;
 
+		old = READ_ONCE(*sigp_ctrl);
 		expect = old.value;
 		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.4 12/16] scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id

[Sasha Levin]

From: Yihang Li <liyihang9@huawei.com>

[ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ]

Currently the driver sets the port invalid if one phy in the port is not
enabled, which may cause issues in expander situation. In directly attached
situation, if phy up doesn't occur in time when refreshing port id, the
port is incorrectly set to invalid which will also cause disk lost.

Therefore set a port invalid only if there are no devices attached to the
port.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 031aa4043c5e..7135bbe5abb8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1397,7 +1397,7 @@ static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
 				device->linkrate = phy->sas_phy.linkrate;
 
 			hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
-		} else
+		} else if (!port->port_attached)
 			port->id = 0xff;
 	}
 }
-- 
2.35.1

[PATCH AUTOSEL 5.4 13/16] platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD

[Sasha Levin]

From: Michael Klein <m.klein@mvz-labor-lb.de>

[ Upstream commit 36c2b9d6710427f802494ba070621cb415198293 ]

Add touchscreen info for the CSL Panther Tab HD.

Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 515c66ca1aec..61cb1a4a8257 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -169,6 +169,23 @@ static const struct ts_dmi_data connect_tablet9_data = {
 	.properties     = connect_tablet9_props,
 };
 
+static const struct property_entry csl_panther_tab_hd_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 20),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data csl_panther_tab_hd_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = csl_panther_tab_hd_props,
+};
+
 static const struct property_entry cube_iwork8_air_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
@@ -721,6 +738,14 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Tablet 9"),
 		},
 	},
+	{
+		/* CSL Panther Tab HD */
+		.driver_data = (void *)&csl_panther_tab_hd_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CSL Computer GmbH & Co. KG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CSL Panther Tab HD"),
+		},
+	},
 	{
 		/* CUBE iwork8 Air */
 		.driver_data = (void *)&cube_iwork8_air_data,
-- 
2.35.1

[PATCH AUTOSEL 5.4 14/16] platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit db9494895b405bf318dc7e563dee6daa51b3b6ed ]

The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop.

Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-nb-wmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 59b78a181723..6424bdb33d2f 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -528,6 +528,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
 	{ KE_KEY, 0x30, { KEY_VOLUMEUP } },
 	{ KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
 	{ KE_KEY, 0x32, { KEY_MUTE } },
+	{ KE_KEY, 0x33, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x35, { KEY_SCREENLOCK } },
 	{ KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
 	{ KE_KEY, 0x41, { KEY_NEXTSONG } },
-- 
2.35.1

[PATCH AUTOSEL 5.4 15/16] platform/x86: asus-wmi: Ignore fan on E410MA

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 82cc5c6c624c63f7b57214e325e2ea685d924e89 ]

The ASUS VivoBook has a fan device described in its ACPI tables but does
not actually contain any physical fan.
Use the quirk to inhibit fan handling.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-nb-wmi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 6424bdb33d2f..15328c03c41b 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -120,6 +120,10 @@ static struct quirk_entry quirk_asus_ga502i = {
 	.wmi_backlight_set_devstate = true,
 };
 
+static struct quirk_entry quirk_asus_ignore_fan = {
+	.wmi_ignore_fan = true,
+};
+
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
 	pr_info("Identified laptop model '%s'\n", dmi->ident);
@@ -493,6 +497,15 @@ static const struct dmi_system_id asus_quirks[] = {
 		},
 		.driver_data = &quirk_asus_ga502i,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUS VivoBook E410MA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "E410MA"),
+		},
+		.driver_data = &quirk_asus_ignore_fan,
+	},
 	{},
 };
 
-- 
2.35.1

[PATCH AUTOSEL 5.4 16/16] lockref: stop doing cpu_relax in the cmpxchg loop

[Sasha Levin]

From: Mateusz Guzik <mjguzik@gmail.com>

[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]

On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.

To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.

All results in ops/s.  Note there is some variance in re-runs, but the
code is consistently faster when contention is present.

  open3 ("Same file open/close"):
  proc          stock       no-pause
     1         805603         814942       (+%1)
     2        1054980        1054781       (-0%)
     8        1544802        1822858      (+18%)
    24        1191064        2199665      (+84%)
    48         851582        1469860      (+72%)
    96         609481        1427170     (+134%)

  fstat2 ("Same file fstat"):
  proc          stock       no-pause
     1        3013872        3047636       (+1%)
     2        4284687        4400421       (+2%)
     8        3257721        5530156      (+69%)
    24        2239819        5466127     (+144%)
    48        1701072        5256609     (+209%)
    96        1269157        6649326     (+423%)

Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):

  proc          stock        patched      patched
                                         +nopause
    24        2378041        2005501      5370335  (-15% / +125%)

That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.

Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.

Code at hand has a rather tortured history.  First modification showed
up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind.  Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.

While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:

    I would actually prefer just removing it entirely and see if
    somebody else hollers. You have the numbers to prove it hurts on
    real hardware, and I don't think we have any numbers to the
    contrary.

    So I think it's better to trust the numbers and remove it as a
    failure, than say "let's just remove it on x86-64 and leave
    everybody else with the potentially broken code"

Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):

    So, from the arm64 side of the fence, I'm perfectly happy just
    removing the cpu_relax() calls from lockref.

As such, come back full circle in history and whack it altogether.

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <tony.luck@intel.com> # ia64
Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/lockref.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/lib/lockref.c b/lib/lockref.c
index 5b34bbd3eba8..81ac5f355242 100644
--- a/lib/lockref.c
+++ b/lib/lockref.c
@@ -24,7 +24,6 @@
 		}								\
 		if (!--retry)							\
 			break;							\
-		cpu_relax();							\
 	}									\
 } while (0)
 
-- 
2.35.1