* [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization
@ 2020-12-11 14:16 Marcin Wojtas
2020-12-15 8:03 ` Adrian Hunter
2021-01-11 18:06 ` Ulf Hansson
0 siblings, 2 replies; 11+ messages in thread
From: Marcin Wojtas @ 2020-12-11 14:16 UTC (permalink / raw)
To: linux-kernel, linux-mmc
Cc: ulf.hansson, huziji, adrian.hunter, jaz, tn, kostap,
Alex Leibovich, Marcin Wojtas, stable
From: Alex Leibovich <alexl@marvell.com>
Automatic Clock Gating is a feature used for the power
consumption optimisation. It turned out that
during early init phase it may prevent the stable voltage
switch to 1.8V - due to that on some platfroms an endless
printout in dmesg can be observed:
"mmc1: 1.8V regulator output did not became stable"
Fix the problem by disabling the ACG at very beginning
of the sdhci_init and let that be enabled later.
Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Signed-off-by: Alex Leibovich <alexl@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cc: stable@vger.kernel.org
---
drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c67611fdaa8a..4b05f6fdefb4 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
/* Disable tuning request and auto-retuning again */
xenon_retune_setup(host);
- xenon_set_acg(host, true);
+ /*
+ * The ACG should be turned off at the early init time, in order
+ * to solve a possile issues with the 1.8V regulator stabilization.
+ * The feature is enabled in later stage.
+ */
+ xenon_set_acg(host, false);
xenon_set_sdclk_off_idle(host, sdhc_id, false);
--
2.29.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2020-12-11 14:16 [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization Marcin Wojtas @ 2020-12-15 8:03 ` Adrian Hunter 2020-12-15 9:17 ` Marcin Wojtas 2021-01-11 18:06 ` Ulf Hansson 1 sibling, 1 reply; 11+ messages in thread From: Adrian Hunter @ 2020-12-15 8:03 UTC (permalink / raw) To: Marcin Wojtas, linux-kernel, linux-mmc Cc: ulf.hansson, huziji, jaz, tn, kostap, Alex Leibovich, stable On 11/12/20 4:16 pm, Marcin Wojtas wrote: > From: Alex Leibovich <alexl@marvell.com> > > Automatic Clock Gating is a feature used for the power > consumption optimisation. It turned out that > during early init phase it may prevent the stable voltage > switch to 1.8V - due to that on some platfroms an endless platfroms -> platforms > printout in dmesg can be observed: > "mmc1: 1.8V regulator output did not became stable" > Fix the problem by disabling the ACG at very beginning > of the sdhci_init and let that be enabled later. > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > Signed-off-by: Alex Leibovich <alexl@marvell.com> > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > index c67611fdaa8a..4b05f6fdefb4 100644 > --- a/drivers/mmc/host/sdhci-xenon.c > +++ b/drivers/mmc/host/sdhci-xenon.c > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > /* Disable tuning request and auto-retuning again */ > xenon_retune_setup(host); > > - xenon_set_acg(host, true); > + /* > + * The ACG should be turned off at the early init time, in order > + * to solve a possile issues with the 1.8V regulator stabilization. a possile -> possible > + * The feature is enabled in later stage. > + */ > + xenon_set_acg(host, false); > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2020-12-15 8:03 ` Adrian Hunter @ 2020-12-15 9:17 ` Marcin Wojtas 0 siblings, 0 replies; 11+ messages in thread From: Marcin Wojtas @ 2020-12-15 9:17 UTC (permalink / raw) To: Adrian Hunter Cc: Linux Kernel Mailing List, linux-mmc, Ulf Hansson, Ziji Hu, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, stable wt., 15 gru 2020 o 09:04 Adrian Hunter <adrian.hunter@intel.com> napisał(a): > > On 11/12/20 4:16 pm, Marcin Wojtas wrote: > > From: Alex Leibovich <alexl@marvell.com> > > > > Automatic Clock Gating is a feature used for the power > > consumption optimisation. It turned out that > > during early init phase it may prevent the stable voltage > > switch to 1.8V - due to that on some platfroms an endless > > platfroms -> platforms > > > printout in dmesg can be observed: > > "mmc1: 1.8V regulator output did not became stable" > > Fix the problem by disabling the ACG at very beginning > > of the sdhci_init and let that be enabled later. > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > Cc: stable@vger.kernel.org > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> > Thank you, I'll repost right away with the typos correction. Best regards, Marcin > > --- > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > index c67611fdaa8a..4b05f6fdefb4 100644 > > --- a/drivers/mmc/host/sdhci-xenon.c > > +++ b/drivers/mmc/host/sdhci-xenon.c > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > /* Disable tuning request and auto-retuning again */ > > xenon_retune_setup(host); > > > > - xenon_set_acg(host, true); > > + /* > > + * The ACG should be turned off at the early init time, in order > > + * to solve a possile issues with the 1.8V regulator stabilization. > > a possile -> possible > > > + * The feature is enabled in later stage. > > + */ > > + xenon_set_acg(host, false); > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2020-12-11 14:16 [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization Marcin Wojtas 2020-12-15 8:03 ` Adrian Hunter @ 2021-01-11 18:06 ` Ulf Hansson 2022-03-14 15:40 ` Pali Rohár 1 sibling, 1 reply; 11+ messages in thread From: Ulf Hansson @ 2021-01-11 18:06 UTC (permalink / raw) To: Marcin Wojtas Cc: Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, jaz, tn, Kostya Porotchkin, Alex Leibovich, # 4.0+ On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > From: Alex Leibovich <alexl@marvell.com> > > Automatic Clock Gating is a feature used for the power > consumption optimisation. It turned out that > during early init phase it may prevent the stable voltage > switch to 1.8V - due to that on some platfroms an endless > printout in dmesg can be observed: > "mmc1: 1.8V regulator output did not became stable" > Fix the problem by disabling the ACG at very beginning > of the sdhci_init and let that be enabled later. > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > Signed-off-by: Alex Leibovich <alexl@marvell.com> > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > Cc: stable@vger.kernel.org Applied for fixes (by fixing the typos), thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > index c67611fdaa8a..4b05f6fdefb4 100644 > --- a/drivers/mmc/host/sdhci-xenon.c > +++ b/drivers/mmc/host/sdhci-xenon.c > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > /* Disable tuning request and auto-retuning again */ > xenon_retune_setup(host); > > - xenon_set_acg(host, true); > + /* > + * The ACG should be turned off at the early init time, in order > + * to solve a possile issues with the 1.8V regulator stabilization. > + * The feature is enabled in later stage. > + */ > + xenon_set_acg(host, false); > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > -- > 2.29.0 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2021-01-11 18:06 ` Ulf Hansson @ 2022-03-14 15:40 ` Pali Rohár 2022-03-14 15:51 ` Marcin Wojtas 0 siblings, 1 reply; 11+ messages in thread From: Pali Rohár @ 2022-03-14 15:40 UTC (permalink / raw) To: Ulf Hansson Cc: Marcin Wojtas, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, jaz, tn, Kostya Porotchkin, Alex Leibovich, # 4.0+ On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > From: Alex Leibovich <alexl@marvell.com> > > > > Automatic Clock Gating is a feature used for the power > > consumption optimisation. It turned out that > > during early init phase it may prevent the stable voltage > > switch to 1.8V - due to that on some platfroms an endless > > printout in dmesg can be observed: > > "mmc1: 1.8V regulator output did not became stable" > > Fix the problem by disabling the ACG at very beginning > > of the sdhci_init and let that be enabled later. > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > Cc: stable@vger.kernel.org > > Applied for fixes (by fixing the typos), thanks! Hello! Is not this patch address same issue which was fixed by patch which was merged earlier? bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > Kind regards > Uffe > > > > --- > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > index c67611fdaa8a..4b05f6fdefb4 100644 > > --- a/drivers/mmc/host/sdhci-xenon.c > > +++ b/drivers/mmc/host/sdhci-xenon.c > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > /* Disable tuning request and auto-retuning again */ > > xenon_retune_setup(host); > > > > - xenon_set_acg(host, true); > > + /* > > + * The ACG should be turned off at the early init time, in order > > + * to solve a possile issues with the 1.8V regulator stabilization. > > + * The feature is enabled in later stage. > > + */ > > + xenon_set_acg(host, false); > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > -- > > 2.29.0 > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-14 15:40 ` Pali Rohár @ 2022-03-14 15:51 ` Marcin Wojtas 2022-03-15 23:03 ` Pali Rohár 0 siblings, 1 reply; 11+ messages in thread From: Marcin Wojtas @ 2022-03-14 15:51 UTC (permalink / raw) To: Pali Rohár Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ Hi Pali, pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > Automatic Clock Gating is a feature used for the power > > > consumption optimisation. It turned out that > > > during early init phase it may prevent the stable voltage > > > switch to 1.8V - due to that on some platfroms an endless > > > printout in dmesg can be observed: > > > "mmc1: 1.8V regulator output did not became stable" > > > Fix the problem by disabling the ACG at very beginning > > > of the sdhci_init and let that be enabled later. > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > Cc: stable@vger.kernel.org > > > > Applied for fixes (by fixing the typos), thanks! > > Hello! > > Is not this patch address same issue which was fixed by patch which was > merged earlier? > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > This indeed look similar. This fix was originally developed for CN913x platform without the mentioned patch (I'm wondering if it would also suffice to fix A3k board's problem). Anyway, I don't think we have an issue here, as everything seems to work fine on top of mainline Linux with both changes. Best regards, Marcin > > Kind regards > > Uffe > > > > > > > --- > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > /* Disable tuning request and auto-retuning again */ > > > xenon_retune_setup(host); > > > > > > - xenon_set_acg(host, true); > > > + /* > > > + * The ACG should be turned off at the early init time, in order > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > + * The feature is enabled in later stage. > > > + */ > > > + xenon_set_acg(host, false); > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > -- > > > 2.29.0 > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-14 15:51 ` Marcin Wojtas @ 2022-03-15 23:03 ` Pali Rohár 2022-03-16 1:03 ` Marcin Wojtas 0 siblings, 1 reply; 11+ messages in thread From: Pali Rohár @ 2022-03-15 23:03 UTC (permalink / raw) To: Marcin Wojtas Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ Hello! On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote: > Hi Pali, > > > pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > > > Automatic Clock Gating is a feature used for the power > > > > consumption optimisation. It turned out that > > > > during early init phase it may prevent the stable voltage > > > > switch to 1.8V - due to that on some platfroms an endless > > > > printout in dmesg can be observed: > > > > "mmc1: 1.8V regulator output did not became stable" > > > > Fix the problem by disabling the ACG at very beginning > > > > of the sdhci_init and let that be enabled later. > > > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > > Cc: stable@vger.kernel.org > > > > > > Applied for fixes (by fixing the typos), thanks! > > > > Hello! > > > > Is not this patch address same issue which was fixed by patch which was > > merged earlier? > > > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > > > > This indeed look similar. This fix was originally developed for CN913x > platform without the mentioned patch (I'm wondering if it would also > suffice to fix A3k board's problem). Anyway, I don't think we have an > issue here, as everything seems to work fine on top of mainline Linux > with both changes. Yea, there should be no issue. Just question is if we need _both_ fixes. I could probably try to revert bb32e1987bc5 and check what happens on A3k board. > Best regards, > Marcin > > > > Kind regards > > > Uffe > > > > > > > > > > --- > > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > > /* Disable tuning request and auto-retuning again */ > > > > xenon_retune_setup(host); > > > > > > > > - xenon_set_acg(host, true); > > > > + /* > > > > + * The ACG should be turned off at the early init time, in order > > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > > + * The feature is enabled in later stage. > > > > + */ > > > > + xenon_set_acg(host, false); > > > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > > > -- > > > > 2.29.0 > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-15 23:03 ` Pali Rohár @ 2022-03-16 1:03 ` Marcin Wojtas 2022-03-18 13:01 ` Pali Rohár 0 siblings, 1 reply; 11+ messages in thread From: Marcin Wojtas @ 2022-03-16 1:03 UTC (permalink / raw) To: Pali Rohár Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ Hi Pali, śr., 16 mar 2022 o 00:03 Pali Rohár <pali@kernel.org> napisał(a): > > Hello! > > On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote: > > Hi Pali, > > > > > > pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > > > > > Automatic Clock Gating is a feature used for the power > > > > > consumption optimisation. It turned out that > > > > > during early init phase it may prevent the stable voltage > > > > > switch to 1.8V - due to that on some platfroms an endless > > > > > printout in dmesg can be observed: > > > > > "mmc1: 1.8V regulator output did not became stable" > > > > > Fix the problem by disabling the ACG at very beginning > > > > > of the sdhci_init and let that be enabled later. > > > > > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > > > Cc: stable@vger.kernel.org > > > > > > > > Applied for fixes (by fixing the typos), thanks! > > > > > > Hello! > > > > > > Is not this patch address same issue which was fixed by patch which was > > > merged earlier? > > > > > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > > > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > > > > > > > This indeed look similar. This fix was originally developed for CN913x > > platform without the mentioned patch (I'm wondering if it would also > > suffice to fix A3k board's problem). Anyway, I don't think we have an > > issue here, as everything seems to work fine on top of mainline Linux > > with both changes. > > Yea, there should be no issue. Just question is if we need _both_ fixes. > > I could probably try to revert bb32e1987bc5 and check what happens on > A3k board. > Yes, that would be interesting. Please let me know whenever you find time to check. Best regards, Marcin > > > > > > > > > > > > > --- > > > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > > > /* Disable tuning request and auto-retuning again */ > > > > > xenon_retune_setup(host); > > > > > > > > > > - xenon_set_acg(host, true); > > > > > + /* > > > > > + * The ACG should be turned off at the early init time, in order > > > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > > > + * The feature is enabled in later stage. > > > > > + */ > > > > > + xenon_set_acg(host, false); > > > > > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > > > > > -- > > > > > 2.29.0 > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-16 1:03 ` Marcin Wojtas @ 2022-03-18 13:01 ` Pali Rohár 2022-03-18 13:06 ` Pali Rohár 0 siblings, 1 reply; 11+ messages in thread From: Pali Rohár @ 2022-03-18 13:01 UTC (permalink / raw) To: Marcin Wojtas Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ On Wednesday 16 March 2022 02:03:35 Marcin Wojtas wrote: > Hi Pali, > > śr., 16 mar 2022 o 00:03 Pali Rohár <pali@kernel.org> napisał(a): > > > > Hello! > > > > On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote: > > > Hi Pali, > > > > > > > > > pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > > > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > > > > > > > Automatic Clock Gating is a feature used for the power > > > > > > consumption optimisation. It turned out that > > > > > > during early init phase it may prevent the stable voltage > > > > > > switch to 1.8V - due to that on some platfroms an endless > > > > > > printout in dmesg can be observed: > > > > > > "mmc1: 1.8V regulator output did not became stable" > > > > > > Fix the problem by disabling the ACG at very beginning > > > > > > of the sdhci_init and let that be enabled later. > > > > > > > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > > > > Cc: stable@vger.kernel.org > > > > > > > > > > Applied for fixes (by fixing the typos), thanks! > > > > > > > > Hello! > > > > > > > > Is not this patch address same issue which was fixed by patch which was > > > > merged earlier? > > > > > > > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > > > > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > > > > > > > > > > This indeed look similar. This fix was originally developed for CN913x > > > platform without the mentioned patch (I'm wondering if it would also > > > suffice to fix A3k board's problem). Anyway, I don't think we have an > > > issue here, as everything seems to work fine on top of mainline Linux > > > with both changes. > > > > Yea, there should be no issue. Just question is if we need _both_ fixes. > > > > I could probably try to revert bb32e1987bc5 and check what happens on > > A3k board. > > > > Yes, that would be interesting. Please let me know whenever you find > time to check. Hello! Now I tested kernel with reverted commit bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") and issue is still fixed. I reverted also bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") commit and then issue appeared again. So any of this commit is fixing that issue on Armada 3720. Should we revert one of them? > Best regards, > Marcin > > > > > > > > > > > > > > > > > --- > > > > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > > > > /* Disable tuning request and auto-retuning again */ > > > > > > xenon_retune_setup(host); > > > > > > > > > > > > - xenon_set_acg(host, true); > > > > > > + /* > > > > > > + * The ACG should be turned off at the early init time, in order > > > > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > > > > + * The feature is enabled in later stage. > > > > > > + */ > > > > > > + xenon_set_acg(host, false); > > > > > > > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > > > > > > > -- > > > > > > 2.29.0 > > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-18 13:01 ` Pali Rohár @ 2022-03-18 13:06 ` Pali Rohár 2022-03-18 13:39 ` Marcin Wojtas 0 siblings, 1 reply; 11+ messages in thread From: Pali Rohár @ 2022-03-18 13:06 UTC (permalink / raw) To: Marcin Wojtas Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ On Friday 18 March 2022 14:01:00 Pali Rohár wrote: > On Wednesday 16 March 2022 02:03:35 Marcin Wojtas wrote: > > Hi Pali, > > > > śr., 16 mar 2022 o 00:03 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > Hello! > > > > > > On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote: > > > > Hi Pali, > > > > > > > > > > > > pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > > > > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > > > > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > > > > > > > > > Automatic Clock Gating is a feature used for the power > > > > > > > consumption optimisation. It turned out that > > > > > > > during early init phase it may prevent the stable voltage > > > > > > > switch to 1.8V - due to that on some platfroms an endless > > > > > > > printout in dmesg can be observed: > > > > > > > "mmc1: 1.8V regulator output did not became stable" > > > > > > > Fix the problem by disabling the ACG at very beginning > > > > > > > of the sdhci_init and let that be enabled later. > > > > > > > > > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > > > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > > > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > > > > > Cc: stable@vger.kernel.org > > > > > > > > > > > > Applied for fixes (by fixing the typos), thanks! > > > > > > > > > > Hello! > > > > > > > > > > Is not this patch address same issue which was fixed by patch which was > > > > > merged earlier? > > > > > > > > > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > > > > > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > > > > > > > > > > > > > This indeed look similar. This fix was originally developed for CN913x > > > > platform without the mentioned patch (I'm wondering if it would also > > > > suffice to fix A3k board's problem). Anyway, I don't think we have an > > > > issue here, as everything seems to work fine on top of mainline Linux > > > > with both changes. > > > > > > Yea, there should be no issue. Just question is if we need _both_ fixes. > > > > > > I could probably try to revert bb32e1987bc5 and check what happens on > > > A3k board. > > > > > > > Yes, that would be interesting. Please let me know whenever you find > > time to check. > > Hello! Now I tested kernel with reverted commit bb32e1987bc5 ("mmc: > sdhci-xenon: fix annoying 1.8V regulator warning") and issue is still > fixed. I reverted also bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying > 1.8V regulator warning") commit and then issue appeared again. I mean that I reverted also 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") commit and then issue appeared again. > So any of this commit is fixing that issue on Armada 3720. > > Should we revert one of them? > > > Best regards, > > Marcin > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > > > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > > > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > > > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > > > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > > > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > > > > > /* Disable tuning request and auto-retuning again */ > > > > > > > xenon_retune_setup(host); > > > > > > > > > > > > > > - xenon_set_acg(host, true); > > > > > > > + /* > > > > > > > + * The ACG should be turned off at the early init time, in order > > > > > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > > > > > + * The feature is enabled in later stage. > > > > > > > + */ > > > > > > > + xenon_set_acg(host, false); > > > > > > > > > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > > > > > > > > > -- > > > > > > > 2.29.0 > > > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization 2022-03-18 13:06 ` Pali Rohár @ 2022-03-18 13:39 ` Marcin Wojtas 0 siblings, 0 replies; 11+ messages in thread From: Marcin Wojtas @ 2022-03-18 13:39 UTC (permalink / raw) To: Pali Rohár Cc: Ulf Hansson, Linux Kernel Mailing List, linux-mmc, Ziji Hu, Adrian Hunter, Grzegorz Jaszczyk, Tomasz Nowicki, Kostya Porotchkin, Alex Leibovich, # 4.0+ Hi Pali, Thanks for testing! pt., 18 mar 2022 o 14:06 Pali Rohár <pali@kernel.org> napisał(a): > > On Friday 18 March 2022 14:01:00 Pali Rohár wrote: > > On Wednesday 16 March 2022 02:03:35 Marcin Wojtas wrote: > > > Hi Pali, > > > > > > śr., 16 mar 2022 o 00:03 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > > > Hello! > > > > > > > > On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote: > > > > > Hi Pali, > > > > > > > > > > > > > > > pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a): > > > > > > > > > > > > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote: > > > > > > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote: > > > > > > > > > > > > > > > > From: Alex Leibovich <alexl@marvell.com> > > > > > > > > > > > > > > > > Automatic Clock Gating is a feature used for the power > > > > > > > > consumption optimisation. It turned out that > > > > > > > > during early init phase it may prevent the stable voltage > > > > > > > > switch to 1.8V - due to that on some platfroms an endless > > > > > > > > printout in dmesg can be observed: > > > > > > > > "mmc1: 1.8V regulator output did not became stable" > > > > > > > > Fix the problem by disabling the ACG at very beginning > > > > > > > > of the sdhci_init and let that be enabled later. > > > > > > > > > > > > > > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") > > > > > > > > Signed-off-by: Alex Leibovich <alexl@marvell.com> > > > > > > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com> > > > > > > > > Cc: stable@vger.kernel.org > > > > > > > > > > > > > > Applied for fixes (by fixing the typos), thanks! > > > > > > > > > > > > Hello! > > > > > > > > > > > > Is not this patch address same issue which was fixed by patch which was > > > > > > merged earlier? > > > > > > > > > > > > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning") > > > > > > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/ > > > > > > > > > > > > > > > > This indeed look similar. This fix was originally developed for CN913x > > > > > platform without the mentioned patch (I'm wondering if it would also > > > > > suffice to fix A3k board's problem). Anyway, I don't think we have an > > > > > issue here, as everything seems to work fine on top of mainline Linux > > > > > with both changes. > > > > > > > > Yea, there should be no issue. Just question is if we need _both_ fixes. > > > > > > > > I could probably try to revert bb32e1987bc5 and check what happens on > > > > A3k board. > > > > > > > > > > Yes, that would be interesting. Please let me know whenever you find > > > time to check. > > > > Hello! Now I tested kernel with reverted commit bb32e1987bc5 ("mmc: > > sdhci-xenon: fix annoying 1.8V regulator warning") and issue is still > > fixed. I reverted also bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying > > 1.8V regulator warning") commit and then issue appeared again. > > I mean that I reverted also 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v > regulator stabilization") commit and then issue appeared again. > > > So any of this commit is fixing that issue on Armada 3720. > > I think both can stay, but if I had to choose, I'd keep 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization"): * Now we know for sure it fixes both Armada 3720 and CN913x/Armada 7k8k * Afaik this patch was checked with HW team (and IMO it looks a bit less hacky than the extra read :) ). Best regards, Marcin > > Should we revert one of them? > > > > > Best regards, > > > Marcin > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > > drivers/mmc/host/sdhci-xenon.c | 7 ++++++- > > > > > > > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > > > > > > > > > > > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > > > > > > > > index c67611fdaa8a..4b05f6fdefb4 100644 > > > > > > > > --- a/drivers/mmc/host/sdhci-xenon.c > > > > > > > > +++ b/drivers/mmc/host/sdhci-xenon.c > > > > > > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host, > > > > > > > > /* Disable tuning request and auto-retuning again */ > > > > > > > > xenon_retune_setup(host); > > > > > > > > > > > > > > > > - xenon_set_acg(host, true); > > > > > > > > + /* > > > > > > > > + * The ACG should be turned off at the early init time, in order > > > > > > > > + * to solve a possile issues with the 1.8V regulator stabilization. > > > > > > > > + * The feature is enabled in later stage. > > > > > > > > + */ > > > > > > > > + xenon_set_acg(host, false); > > > > > > > > > > > > > > > > xenon_set_sdclk_off_idle(host, sdhc_id, false); > > > > > > > > > > > > > > > > -- > > > > > > > > 2.29.0 > > > > > > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-03-18 13:39 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-11 14:16 [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization Marcin Wojtas 2020-12-15 8:03 ` Adrian Hunter 2020-12-15 9:17 ` Marcin Wojtas 2021-01-11 18:06 ` Ulf Hansson 2022-03-14 15:40 ` Pali Rohár 2022-03-14 15:51 ` Marcin Wojtas 2022-03-15 23:03 ` Pali Rohár 2022-03-16 1:03 ` Marcin Wojtas 2022-03-18 13:01 ` Pali Rohár 2022-03-18 13:06 ` Pali Rohár 2022-03-18 13:39 ` Marcin Wojtas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).