* [PATCH v2 0/7] SPL fixes for STM32F7 MCUs
@ 2022-09-20 16:04 Patrice Chotard
2022-09-20 16:04 ` [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot Patrice Chotard
` (7 more replies)
0 siblings, 8 replies; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
This series is fixing issues in SPL boot mode:
- SPL binary size over 0x8000 bytes for STM32F746-disco, STM32F769-DISCO and STM32746G-EVAL boards
- fix embedded flash size for STM32F769-DISCO
- fix CONFIG_SYS_SPL_ARGS_ADDR for STM32F746-DISCO and STM32746G-EVAL
Changes in v2:
- Remove SYS_UBOOT_FLAG from stm32f746-disco.h
Patrice Chotard (7):
configs: stm32f746-disco: Fix SPL boot
configs: stm32f769-disco: Fix SPL boot
configs: stm32746g-eval: Fix SPL boot
configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR
configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR
config: stm32f769-disco: Fix internal flash size
configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag
arch/arm/include/asm/arch-stm32f7/stm32.h | 6 +++---
configs/stm32746g-eval_spl_defconfig | 9 +++++----
configs/stm32f746-disco_spl_defconfig | 9 +++++----
configs/stm32f769-disco_defconfig | 2 +-
configs/stm32f769-disco_spl_defconfig | 9 +++++----
include/configs/stm32f746-disco.h | 1 -
6 files changed, 19 insertions(+), 17 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 12:50 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 2/7] configs: stm32f769-disco: " Patrice Chotard
` (6 subsequent siblings)
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
increases SPL size over the initial 0x8000 limit.
Increase the SPL size to 0x9000 to fix SPL boot.
Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
configs/stm32f746-disco_spl_defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
index e7b1acc433..5e8a8aaf3c 100644
--- a/configs/stm32f746-disco_spl_defconfig
+++ b/configs/stm32f746-disco_spl_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_STM32=y
-CONFIG_SYS_TEXT_BASE=0x08008000
+CONFIG_SYS_TEXT_BASE=0x08009000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_SYS_MALLOC_F_LEN=0xE00
CONFIG_SPL_GPIO=y
@@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SIZE_LIMIT=0x9000
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
+CONFIG_SYS_LOAD_ADDR=0x8009000
CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_LATE_INIT=y
-CONFIG_SPL_PAD_TO=0x8000
+CONFIG_SPL_PAD_TO=0x9000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
2022-09-20 16:04 ` [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 3/7] configs: stm32746g-eval: " Patrice Chotard
` (5 subsequent siblings)
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
increases SPL size over the initial 0x8000 limit.
Increase the SPL size to 0x9000 to fix SPL boot.
Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
configs/stm32f769-disco_spl_defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index 19d2c24abb..b56d88f9f6 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_STM32=y
-CONFIG_SYS_TEXT_BASE=0x08008000
+CONFIG_SYS_TEXT_BASE=0x08009000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_SYS_MALLOC_F_LEN=0xE00
CONFIG_SPL_GPIO=y
@@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SIZE_LIMIT=0x9000
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
+CONFIG_SYS_LOAD_ADDR=0x8009000
CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -28,7 +29,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_PAD_TO=0x8000
+CONFIG_SPL_PAD_TO=0x9000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
2022-09-20 16:04 ` [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot Patrice Chotard
2022-09-20 16:04 ` [PATCH v2 2/7] configs: stm32f769-disco: " Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR Patrice Chotard
` (4 subsequent siblings)
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
increases SPL size over the initial 0x8000 limit.
Increase the SPL size to 0x9000 to fix SPL boot.
Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
configs/stm32746g-eval_spl_defconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
index a3b7146454..d8d55c2d3c 100644
--- a/configs/stm32746g-eval_spl_defconfig
+++ b/configs/stm32746g-eval_spl_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_STM32=y
-CONFIG_SYS_TEXT_BASE=0x08008000
+CONFIG_SYS_TEXT_BASE=0x08009000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_SYS_MALLOC_F_LEN=0xE00
CONFIG_SPL_GPIO=y
@@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_SIZE_LIMIT=0x9000
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x8008000
+CONFIG_SYS_LOAD_ADDR=0x8009000
CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_LATE_INIT=y
-CONFIG_SPL_PAD_TO=0x8000
+CONFIG_SPL_PAD_TO=0x9000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
` (2 preceding siblings ...)
2022-09-20 16:04 ` [PATCH v2 3/7] configs: stm32746g-eval: " Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 5/7] configs: stm32746g-eval: " Patrice Chotard
` (3 subsequent siblings)
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
It solves hard fault when jumping from SPL to U-Boot.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
configs/stm32f746-disco_spl_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
index 5e8a8aaf3c..d4a65bde24 100644
--- a/configs/stm32f746-disco_spl_defconfig
+++ b/configs/stm32f746-disco_spl_defconfig
@@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_XIP_SUPPORT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
+CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
CONFIG_SPL_DM_RESET=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_GPT=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
` (3 preceding siblings ...)
2022-09-20 16:04 ` [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size Patrice Chotard
` (2 subsequent siblings)
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
It solves hard fault when jumping from SPL to U-Boot.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
configs/stm32746g-eval_spl_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
index d8d55c2d3c..28f522b15e 100644
--- a/configs/stm32746g-eval_spl_defconfig
+++ b/configs/stm32746g-eval_spl_defconfig
@@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_XIP_SUPPORT=y
-CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
+CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
CONFIG_SPL_DM_RESET=y
CONFIG_SYS_PBSIZE=1050
CONFIG_CMD_GPT=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
` (4 preceding siblings ...)
2022-09-20 16:04 ` [PATCH v2 5/7] configs: stm32746g-eval: " Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 13:05 ` Patrick DELAUNAY
2022-09-20 16:04 ` [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag Patrice Chotard
2022-09-20 21:28 ` [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Waldemar Brodkorb
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
arch-stm32f7/stm32.h file is shared between STM32F746 and STM32F769
MCUs. But STM32F769 embeds 2MB of internal flash instead of 1MB for
STM32F746. The flash layout is quite similar between the 2 SoCs :
STM32F746 STM32F769
4 * 32KB sectors 4 * 32KB sectors
1 * 128KB sector 1 * 128KB sector
3 * 256KB sectors 7 * 256KB sectors
Update sect_sz_kb[] structure and SYS_MAX_FLASH_SECT accordingly.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
Changes in v2:
- Remove SYS_UBOOT_FLAG from stm32f746-disco.h
arch/arm/include/asm/arch-stm32f7/stm32.h | 6 +++---
configs/stm32f769-disco_defconfig | 2 +-
configs/stm32f769-disco_spl_defconfig | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
index 3451e74a3d..57db839e8d 100644
--- a/arch/arm/include/asm/arch-stm32f7/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -10,9 +10,9 @@
#include <asm/arch-stm32/stm32f.h>
static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
- [0 ... 3] = 32 * 1024,
- [4] = 128 * 1024,
- [5 ... 7] = 256 * 1024
+ [0 ... 3] = 32 * 1024,
+ [4] = 128 * 1024,
+ [5 ... CONFIG_SYS_MAX_FLASH_SECT - 1] = 256 * 1024
};
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
index 423af7446a..5b5307ca1d 100644
--- a/configs/stm32f769-disco_defconfig
+++ b/configs/stm32f769-disco_defconfig
@@ -41,7 +41,7 @@ CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_STM32_FLASH=y
-CONFIG_SYS_MAX_FLASH_SECT=8
+CONFIG_SYS_MAX_FLASH_SECT=12
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index b56d88f9f6..b5d54b48ec 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -63,7 +63,7 @@ CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_STM32_FLASH=y
-CONFIG_SYS_MAX_FLASH_SECT=8
+CONFIG_SYS_MAX_FLASH_SECT=12
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
` (5 preceding siblings ...)
2022-09-20 16:04 ` [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size Patrice Chotard
@ 2022-09-20 16:04 ` Patrice Chotard
2022-09-26 13:02 ` Patrick DELAUNAY
2022-09-20 21:28 ` [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Waldemar Brodkorb
7 siblings, 1 reply; 23+ messages in thread
From: Patrice Chotard @ 2022-09-20 16:04 UTC (permalink / raw)
To: u-boot; +Cc: Patrice CHOTARD, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
By pressing "c" key during SPL execution, we force U-boot execution
instead of a kernel XIP image.
This fixes a hard fault when booting stm32f746-disco in SPL with "c"
key pressed during SPL execution.
U-Boot SPL 2022.10-rc5-00009-g40d02baa91 (Sep 20 2022 - 17:21:21 +0200)
Trying to boot from XIP
Hard fault
pc : 080083fc lr : 08000d1b xPSR : 21000000
r12 : 2004f108 r3 : 080083fd r2 : 00000028
r1 : 2004f0c8 r0 : 2004f0e4
Resetting CPU ...
This is due to SYS_UBOOT_START flag set to 0x080083FD which is not correct.
If unset, SYS_UBOOT_START is set by default to CONFIG_SYS_TEXT_BASE
which match with our requirement.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
(no changes since v1)
include/configs/stm32f746-disco.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 64c1bc7d43..b0ec226114 100644
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -34,7 +34,6 @@
BOOTENV
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-#define CONFIG_SYS_UBOOT_START 0x080083FD
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
CONFIG_SPL_PAD_TO)
--
2.25.1
^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v2 0/7] SPL fixes for STM32F7 MCUs
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
` (6 preceding siblings ...)
2022-09-20 16:04 ` [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag Patrice Chotard
@ 2022-09-20 21:28 ` Waldemar Brodkorb
7 siblings, 0 replies; 23+ messages in thread
From: Waldemar Brodkorb @ 2022-09-20 21:28 UTC (permalink / raw)
To: Patrice Chotard; +Cc: u-boot, Patrick DELAUNAY, U-Boot STM32, Vikas Manocha
Hi Patrice,
Patrice Chotard wrote,
>
> This series is fixing issues in SPL boot mode:
> - SPL binary size over 0x8000 bytes for STM32F746-disco, STM32F769-DISCO and STM32746G-EVAL boards
> - fix embedded flash size for STM32F769-DISCO
> - fix CONFIG_SYS_SPL_ARGS_ADDR for STM32F746-DISCO and STM32746G-EVAL
>
> Changes in v2:
> - Remove SYS_UBOOT_FLAG from stm32f746-disco.h
I tested this series and all is working fine now. Both defconfigs
and with or without Falcon mode. Thanks.
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
best regards
Waldemar
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot
2022-09-20 16:04 ` [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot Patrice Chotard
@ 2022-09-26 12:50 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 12:50 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
> increases SPL size over the initial 0x8000 limit.
> Increase the SPL size to 0x9000 to fix SPL boot.
> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>
> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> configs/stm32f746-disco_spl_defconfig | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
> index e7b1acc433..5e8a8aaf3c 100644
> --- a/configs/stm32f746-disco_spl_defconfig
> +++ b/configs/stm32f746-disco_spl_defconfig
> @@ -1,6 +1,6 @@
> CONFIG_ARM=y
> CONFIG_ARCH_STM32=y
> -CONFIG_SYS_TEXT_BASE=0x08008000
> +CONFIG_SYS_TEXT_BASE=0x08009000
> CONFIG_SYS_MALLOC_LEN=0x100000
> CONFIG_SYS_MALLOC_F_LEN=0xE00
> CONFIG_SPL_GPIO=y
> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
> CONFIG_SYS_PROMPT="U-Boot > "
> CONFIG_SPL_SERIAL=y
> CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_SIZE_LIMIT=0x9000
> CONFIG_STM32F7=y
> CONFIG_TARGET_STM32F746_DISCO=y
> CONFIG_SPL=y
> -CONFIG_SYS_LOAD_ADDR=0x8008000
> +CONFIG_SYS_LOAD_ADDR=0x8009000
> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_BOARD_LATE_INIT=y
> -CONFIG_SPL_PAD_TO=0x8000
> +CONFIG_SPL_PAD_TO=0x9000
> CONFIG_SPL_NO_BSS_LIMIT=y
> CONFIG_SPL_BOARD_INIT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot
2022-09-20 16:04 ` [PATCH v2 2/7] configs: stm32f769-disco: " Patrice Chotard
@ 2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 12:57 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
> increases SPL size over the initial 0x8000 limit.
> Increase the SPL size to 0x9000 to fix SPL boot.
> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>
> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> configs/stm32f769-disco_spl_defconfig | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
> index 19d2c24abb..b56d88f9f6 100644
> --- a/configs/stm32f769-disco_spl_defconfig
> +++ b/configs/stm32f769-disco_spl_defconfig
> @@ -1,6 +1,6 @@
> CONFIG_ARM=y
> CONFIG_ARCH_STM32=y
> -CONFIG_SYS_TEXT_BASE=0x08008000
> +CONFIG_SYS_TEXT_BASE=0x08009000
> CONFIG_SYS_MALLOC_LEN=0x100000
> CONFIG_SYS_MALLOC_F_LEN=0xE00
> CONFIG_SPL_GPIO=y
> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
> CONFIG_SYS_PROMPT="U-Boot > "
> CONFIG_SPL_SERIAL=y
> CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_SIZE_LIMIT=0x9000
> CONFIG_STM32F7=y
> CONFIG_TARGET_STM32F746_DISCO=y
> CONFIG_SPL=y
> -CONFIG_SYS_LOAD_ADDR=0x8008000
> +CONFIG_SYS_LOAD_ADDR=0x8009000
> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> @@ -28,7 +29,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
> CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
> # CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_SPL_PAD_TO=0x8000
> +CONFIG_SPL_PAD_TO=0x9000
> CONFIG_SPL_NO_BSS_LIMIT=y
> CONFIG_SPL_BOARD_INIT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot
2022-09-20 16:04 ` [PATCH v2 3/7] configs: stm32746g-eval: " Patrice Chotard
@ 2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 12:57 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
> increases SPL size over the initial 0x8000 limit.
> Increase the SPL size to 0x9000 to fix SPL boot.
> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>
> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> configs/stm32746g-eval_spl_defconfig | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
> index a3b7146454..d8d55c2d3c 100644
> --- a/configs/stm32746g-eval_spl_defconfig
> +++ b/configs/stm32746g-eval_spl_defconfig
> @@ -1,6 +1,6 @@
> CONFIG_ARM=y
> CONFIG_ARCH_STM32=y
> -CONFIG_SYS_TEXT_BASE=0x08008000
> +CONFIG_SYS_TEXT_BASE=0x08009000
> CONFIG_SYS_MALLOC_LEN=0x100000
> CONFIG_SYS_MALLOC_F_LEN=0xE00
> CONFIG_SPL_GPIO=y
> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
> CONFIG_SYS_PROMPT="U-Boot > "
> CONFIG_SPL_SERIAL=y
> CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_SIZE_LIMIT=0x9000
> CONFIG_STM32F7=y
> CONFIG_TARGET_STM32F746_DISCO=y
> CONFIG_SPL=y
> -CONFIG_SYS_LOAD_ADDR=0x8008000
> +CONFIG_SYS_LOAD_ADDR=0x8009000
> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
> # CONFIG_DISPLAY_CPUINFO is not set
> CONFIG_BOARD_LATE_INIT=y
> -CONFIG_SPL_PAD_TO=0x8000
> +CONFIG_SPL_PAD_TO=0x9000
> CONFIG_SPL_NO_BSS_LIMIT=y
> CONFIG_SPL_BOARD_INIT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-20 16:04 ` [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR Patrice Chotard
@ 2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 12:58 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
> fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
> It solves hard fault when jumping from SPL to U-Boot.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> configs/stm32f746-disco_spl_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
> index 5e8a8aaf3c..d4a65bde24 100644
> --- a/configs/stm32f746-disco_spl_defconfig
> +++ b/configs/stm32f746-disco_spl_defconfig
> @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> CONFIG_SPL_MTD_SUPPORT=y
> CONFIG_SPL_XIP_SUPPORT=y
> -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
> +CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
> CONFIG_SPL_DM_RESET=y
> CONFIG_SYS_PBSIZE=1050
> CONFIG_CMD_GPT=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-20 16:04 ` [PATCH v2 5/7] configs: stm32746g-eval: " Patrice Chotard
@ 2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 12:58 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
> fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
> It solves hard fault when jumping from SPL to U-Boot.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> configs/stm32746g-eval_spl_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
> index d8d55c2d3c..28f522b15e 100644
> --- a/configs/stm32746g-eval_spl_defconfig
> +++ b/configs/stm32746g-eval_spl_defconfig
> @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> CONFIG_SPL_MTD_SUPPORT=y
> CONFIG_SPL_XIP_SUPPORT=y
> -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
> +CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
> CONFIG_SPL_DM_RESET=y
> CONFIG_SYS_PBSIZE=1050
> CONFIG_CMD_GPT=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag
2022-09-20 16:04 ` [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag Patrice Chotard
@ 2022-09-26 13:02 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 13:02 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> By pressing "c" key during SPL execution, we force U-boot execution
> instead of a kernel XIP image.
>
> This fixes a hard fault when booting stm32f746-disco in SPL with "c"
> key pressed during SPL execution.
>
> U-Boot SPL 2022.10-rc5-00009-g40d02baa91 (Sep 20 2022 - 17:21:21 +0200)
> Trying to boot from XIP
> Hard fault
> pc : 080083fc lr : 08000d1b xPSR : 21000000
> r12 : 2004f108 r3 : 080083fd r2 : 00000028
> r1 : 2004f0c8 r0 : 2004f0e4
> Resetting CPU ...
>
> This is due to SYS_UBOOT_START flag set to 0x080083FD which is not correct.
> If unset, SYS_UBOOT_START is set by default to CONFIG_SYS_TEXT_BASE
> which match with our requirement.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> (no changes since v1)
>
> include/configs/stm32f746-disco.h | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
> index 64c1bc7d43..b0ec226114 100644
> --- a/include/configs/stm32f746-disco.h
> +++ b/include/configs/stm32f746-disco.h
> @@ -34,7 +34,6 @@
> BOOTENV
>
> #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
> -#define CONFIG_SYS_UBOOT_START 0x080083FD
> #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
> CONFIG_SPL_PAD_TO)
>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size
2022-09-20 16:04 ` [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size Patrice Chotard
@ 2022-09-26 13:05 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 1 reply; 23+ messages in thread
From: Patrick DELAUNAY @ 2022-09-26 13:05 UTC (permalink / raw)
To: Patrice Chotard, u-boot; +Cc: U-Boot STM32, Vikas Manocha
Hi,
On 9/20/22 18:04, Patrice Chotard wrote:
> arch-stm32f7/stm32.h file is shared between STM32F746 and STM32F769
> MCUs. But STM32F769 embeds 2MB of internal flash instead of 1MB for
> STM32F746. The flash layout is quite similar between the 2 SoCs :
>
> STM32F746 STM32F769
> 4 * 32KB sectors 4 * 32KB sectors
> 1 * 128KB sector 1 * 128KB sector
> 3 * 256KB sectors 7 * 256KB sectors
>
> Update sect_sz_kb[] structure and SYS_MAX_FLASH_SECT accordingly.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>
> ---
>
> Changes in v2:
> - Remove SYS_UBOOT_FLAG from stm32f746-disco.h
>
> arch/arm/include/asm/arch-stm32f7/stm32.h | 6 +++---
> configs/stm32f769-disco_defconfig | 2 +-
> configs/stm32f769-disco_spl_defconfig | 2 +-
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
> index 3451e74a3d..57db839e8d 100644
> --- a/arch/arm/include/asm/arch-stm32f7/stm32.h
> +++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
> @@ -10,9 +10,9 @@
> #include <asm/arch-stm32/stm32f.h>
>
> static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
> - [0 ... 3] = 32 * 1024,
> - [4] = 128 * 1024,
> - [5 ... 7] = 256 * 1024
> + [0 ... 3] = 32 * 1024,
> + [4] = 128 * 1024,
> + [5 ... CONFIG_SYS_MAX_FLASH_SECT - 1] = 256 * 1024
> };
>
> #endif /* _ASM_ARCH_HARDWARE_H */
> diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
> index 423af7446a..5b5307ca1d 100644
> --- a/configs/stm32f769-disco_defconfig
> +++ b/configs/stm32f769-disco_defconfig
> @@ -41,7 +41,7 @@ CONFIG_MTD=y
> CONFIG_DM_MTD=y
> CONFIG_MTD_NOR_FLASH=y
> CONFIG_STM32_FLASH=y
> -CONFIG_SYS_MAX_FLASH_SECT=8
> +CONFIG_SYS_MAX_FLASH_SECT=12
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH_MACRONIX=y
> CONFIG_SPI_FLASH_STMICRO=y
> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
> index b56d88f9f6..b5d54b48ec 100644
> --- a/configs/stm32f769-disco_spl_defconfig
> +++ b/configs/stm32f769-disco_spl_defconfig
> @@ -63,7 +63,7 @@ CONFIG_MTD=y
> CONFIG_DM_MTD=y
> CONFIG_MTD_NOR_FLASH=y
> CONFIG_STM32_FLASH=y
> -CONFIG_SYS_MAX_FLASH_SECT=8
> +CONFIG_SYS_MAX_FLASH_SECT=12
> CONFIG_DM_SPI_FLASH=y
> CONFIG_SPI_FLASH_MACRONIX=y
> CONFIG_SPI_FLASH_STMICRO=y
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Thanks
Patrick
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot
2022-09-26 12:50 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 14:50, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
>> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
>> increases SPL size over the initial 0x8000 limit.
>> Increase the SPL size to 0x9000 to fix SPL boot.
>> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>>
>> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> configs/stm32f746-disco_spl_defconfig | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
>> index e7b1acc433..5e8a8aaf3c 100644
>> --- a/configs/stm32f746-disco_spl_defconfig
>> +++ b/configs/stm32f746-disco_spl_defconfig
>> @@ -1,6 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_STM32=y
>> -CONFIG_SYS_TEXT_BASE=0x08008000
>> +CONFIG_SYS_TEXT_BASE=0x08009000
>> CONFIG_SYS_MALLOC_LEN=0x100000
>> CONFIG_SYS_MALLOC_F_LEN=0xE00
>> CONFIG_SPL_GPIO=y
>> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
>> CONFIG_SYS_PROMPT="U-Boot > "
>> CONFIG_SPL_SERIAL=y
>> CONFIG_SPL_DRIVERS_MISC=y
>> +CONFIG_SPL_SIZE_LIMIT=0x9000
>> CONFIG_STM32F7=y
>> CONFIG_TARGET_STM32F746_DISCO=y
>> CONFIG_SPL=y
>> -CONFIG_SYS_LOAD_ADDR=0x8008000
>> +CONFIG_SYS_LOAD_ADDR=0x8009000
>> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>> CONFIG_DISTRO_DEFAULTS=y
>> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
>> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>> # CONFIG_DISPLAY_CPUINFO is not set
>> CONFIG_BOARD_LATE_INIT=y
>> -CONFIG_SPL_PAD_TO=0x8000
>> +CONFIG_SPL_PAD_TO=0x9000
>> CONFIG_SPL_NO_BSS_LIMIT=y
>> CONFIG_SPL_BOARD_INIT=y
>> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot
2022-09-26 12:57 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 14:57, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
>> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
>> increases SPL size over the initial 0x8000 limit.
>> Increase the SPL size to 0x9000 to fix SPL boot.
>> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>>
>> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> configs/stm32f769-disco_spl_defconfig | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
>> index 19d2c24abb..b56d88f9f6 100644
>> --- a/configs/stm32f769-disco_spl_defconfig
>> +++ b/configs/stm32f769-disco_spl_defconfig
>> @@ -1,6 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_STM32=y
>> -CONFIG_SYS_TEXT_BASE=0x08008000
>> +CONFIG_SYS_TEXT_BASE=0x08009000
>> CONFIG_SYS_MALLOC_LEN=0x100000
>> CONFIG_SYS_MALLOC_F_LEN=0xE00
>> CONFIG_SPL_GPIO=y
>> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
>> CONFIG_SYS_PROMPT="U-Boot > "
>> CONFIG_SPL_SERIAL=y
>> CONFIG_SPL_DRIVERS_MISC=y
>> +CONFIG_SPL_SIZE_LIMIT=0x9000
>> CONFIG_STM32F7=y
>> CONFIG_TARGET_STM32F746_DISCO=y
>> CONFIG_SPL=y
>> -CONFIG_SYS_LOAD_ADDR=0x8008000
>> +CONFIG_SYS_LOAD_ADDR=0x8009000
>> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>> CONFIG_DISTRO_DEFAULTS=y
>> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> @@ -28,7 +29,7 @@ CONFIG_AUTOBOOT_STOP_STR=" "
>> CONFIG_USE_BOOTARGS=y
>> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>> # CONFIG_DISPLAY_CPUINFO is not set
>> -CONFIG_SPL_PAD_TO=0x8000
>> +CONFIG_SPL_PAD_TO=0x9000
>> CONFIG_SPL_NO_BSS_LIMIT=y
>> CONFIG_SPL_BOARD_INIT=y
>> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot
2022-09-26 12:57 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 14:57, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> Commit 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>> replaces CONFIG_SYS_FDT_BASE by CONFIG_SYS_SPL_ARGS_ADDR.
>> As CONFIG_SYS_SPL_ARGS_ADDR enables additional code when enable, it
>> increases SPL size over the initial 0x8000 limit.
>> Increase the SPL size to 0x9000 to fix SPL boot.
>> Set SPL_SIZE_LIMIT to 0x9000 to avoid similar issue in the future.
>>
>> Fixes 'b4b9a00ed593 ("Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig")'
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> configs/stm32746g-eval_spl_defconfig | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
>> index a3b7146454..d8d55c2d3c 100644
>> --- a/configs/stm32746g-eval_spl_defconfig
>> +++ b/configs/stm32746g-eval_spl_defconfig
>> @@ -1,6 +1,6 @@
>> CONFIG_ARM=y
>> CONFIG_ARCH_STM32=y
>> -CONFIG_SYS_TEXT_BASE=0x08008000
>> +CONFIG_SYS_TEXT_BASE=0x08009000
>> CONFIG_SYS_MALLOC_LEN=0x100000
>> CONFIG_SYS_MALLOC_F_LEN=0xE00
>> CONFIG_SPL_GPIO=y
>> @@ -13,10 +13,11 @@ CONFIG_SPL_TEXT_BASE=0x8000000
>> CONFIG_SYS_PROMPT="U-Boot > "
>> CONFIG_SPL_SERIAL=y
>> CONFIG_SPL_DRIVERS_MISC=y
>> +CONFIG_SPL_SIZE_LIMIT=0x9000
>> CONFIG_STM32F7=y
>> CONFIG_TARGET_STM32F746_DISCO=y
>> CONFIG_SPL=y
>> -CONFIG_SYS_LOAD_ADDR=0x8008000
>> +CONFIG_SYS_LOAD_ADDR=0x8009000
>> CONFIG_BUILD_TARGET="u-boot-with-spl.bin"
>> CONFIG_DISTRO_DEFAULTS=y
>> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> @@ -29,7 +30,7 @@ CONFIG_USE_BOOTARGS=y
>> CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
>> # CONFIG_DISPLAY_CPUINFO is not set
>> CONFIG_BOARD_LATE_INIT=y
>> -CONFIG_SPL_PAD_TO=0x8000
>> +CONFIG_SPL_PAD_TO=0x9000
>> CONFIG_SPL_NO_BSS_LIMIT=y
>> CONFIG_SPL_BOARD_INIT=y
>> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-26 12:58 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 14:58, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
>> fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
>> It solves hard fault when jumping from SPL to U-Boot.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> configs/stm32f746-disco_spl_defconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
>> index 5e8a8aaf3c..d4a65bde24 100644
>> --- a/configs/stm32f746-disco_spl_defconfig
>> +++ b/configs/stm32f746-disco_spl_defconfig
>> @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
>> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>> CONFIG_SPL_MTD_SUPPORT=y
>> CONFIG_SPL_XIP_SUPPORT=y
>> -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
>> +CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
>> CONFIG_SPL_DM_RESET=y
>> CONFIG_SYS_PBSIZE=1050
>> CONFIG_CMD_GPT=y
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR
2022-09-26 12:58 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 14:58, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> STM32F746 embeds 1 MB of internal flash [0x08000000-0x080fffff],
>> fix CONFIG_SYS_SPL_ARGS_ADDR accordingly
>> It solves hard fault when jumping from SPL to U-Boot.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> configs/stm32746g-eval_spl_defconfig | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
>> index d8d55c2d3c..28f522b15e 100644
>> --- a/configs/stm32746g-eval_spl_defconfig
>> +++ b/configs/stm32746g-eval_spl_defconfig
>> @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y
>> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>> CONFIG_SPL_MTD_SUPPORT=y
>> CONFIG_SPL_XIP_SUPPORT=y
>> -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
>> +CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000
>> CONFIG_SPL_DM_RESET=y
>> CONFIG_SYS_PBSIZE=1050
>> CONFIG_CMD_GPT=y
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size
2022-09-26 13:05 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 15:05, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> arch-stm32f7/stm32.h file is shared between STM32F746 and STM32F769
>> MCUs. But STM32F769 embeds 2MB of internal flash instead of 1MB for
>> STM32F746. The flash layout is quite similar between the 2 SoCs :
>>
>> STM32F746 STM32F769
>> 4 * 32KB sectors 4 * 32KB sectors
>> 1 * 128KB sector 1 * 128KB sector
>> 3 * 256KB sectors 7 * 256KB sectors
>>
>> Update sect_sz_kb[] structure and SYS_MAX_FLASH_SECT accordingly.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>>
>> ---
>>
>> Changes in v2:
>> - Remove SYS_UBOOT_FLAG from stm32f746-disco.h
>>
>> arch/arm/include/asm/arch-stm32f7/stm32.h | 6 +++---
>> configs/stm32f769-disco_defconfig | 2 +-
>> configs/stm32f769-disco_spl_defconfig | 2 +-
>> 3 files changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
>> index 3451e74a3d..57db839e8d 100644
>> --- a/arch/arm/include/asm/arch-stm32f7/stm32.h
>> +++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
>> @@ -10,9 +10,9 @@
>> #include <asm/arch-stm32/stm32f.h>
>> static const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = {
>> - [0 ... 3] = 32 * 1024,
>> - [4] = 128 * 1024,
>> - [5 ... 7] = 256 * 1024
>> + [0 ... 3] = 32 * 1024,
>> + [4] = 128 * 1024,
>> + [5 ... CONFIG_SYS_MAX_FLASH_SECT - 1] = 256 * 1024
>> };
>> #endif /* _ASM_ARCH_HARDWARE_H */
>> diff --git a/configs/stm32f769-disco_defconfig b/configs/stm32f769-disco_defconfig
>> index 423af7446a..5b5307ca1d 100644
>> --- a/configs/stm32f769-disco_defconfig
>> +++ b/configs/stm32f769-disco_defconfig
>> @@ -41,7 +41,7 @@ CONFIG_MTD=y
>> CONFIG_DM_MTD=y
>> CONFIG_MTD_NOR_FLASH=y
>> CONFIG_STM32_FLASH=y
>> -CONFIG_SYS_MAX_FLASH_SECT=8
>> +CONFIG_SYS_MAX_FLASH_SECT=12
>> CONFIG_DM_SPI_FLASH=y
>> CONFIG_SPI_FLASH_MACRONIX=y
>> CONFIG_SPI_FLASH_STMICRO=y
>> diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
>> index b56d88f9f6..b5d54b48ec 100644
>> --- a/configs/stm32f769-disco_spl_defconfig
>> +++ b/configs/stm32f769-disco_spl_defconfig
>> @@ -63,7 +63,7 @@ CONFIG_MTD=y
>> CONFIG_DM_MTD=y
>> CONFIG_MTD_NOR_FLASH=y
>> CONFIG_STM32_FLASH=y
>> -CONFIG_SYS_MAX_FLASH_SECT=8
>> +CONFIG_SYS_MAX_FLASH_SECT=12
>> CONFIG_DM_SPI_FLASH=y
>> CONFIG_SPI_FLASH_MACRONIX=y
>> CONFIG_SPI_FLASH_STMICRO=y
>
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag
2022-09-26 13:02 ` Patrick DELAUNAY
@ 2022-09-26 15:56 ` Patrice CHOTARD
0 siblings, 0 replies; 23+ messages in thread
From: Patrice CHOTARD @ 2022-09-26 15:56 UTC (permalink / raw)
To: Patrick DELAUNAY, u-boot; +Cc: U-Boot STM32, Vikas Manocha
On 9/26/22 15:02, Patrick DELAUNAY wrote:
> Hi,
>
> On 9/20/22 18:04, Patrice Chotard wrote:
>> By pressing "c" key during SPL execution, we force U-boot execution
>> instead of a kernel XIP image.
>>
>> This fixes a hard fault when booting stm32f746-disco in SPL with "c"
>> key pressed during SPL execution.
>>
>> U-Boot SPL 2022.10-rc5-00009-g40d02baa91 (Sep 20 2022 - 17:21:21 +0200)
>> Trying to boot from XIP
>> Hard fault
>> pc : 080083fc lr : 08000d1b xPSR : 21000000
>> r12 : 2004f108 r3 : 080083fd r2 : 00000028
>> r1 : 2004f0c8 r0 : 2004f0e4
>> Resetting CPU ...
>>
>> This is due to SYS_UBOOT_START flag set to 0x080083FD which is not correct.
>> If unset, SYS_UBOOT_START is set by default to CONFIG_SYS_TEXT_BASE
>> which match with our requirement.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>> ---
>>
>> (no changes since v1)
>>
>> include/configs/stm32f746-disco.h | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
>> index 64c1bc7d43..b0ec226114 100644
>> --- a/include/configs/stm32f746-disco.h
>> +++ b/include/configs/stm32f746-disco.h
>> @@ -34,7 +34,6 @@
>> BOOTENV
>> #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
>> -#define CONFIG_SYS_UBOOT_START 0x080083FD
>> #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
>> CONFIG_SPL_PAD_TO)
>>
>
>
>
> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>
> Thanks
> Patrick
>
Applied to u-boot-stm32/next
Thanks
^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2022-09-26 15:57 UTC | newest]
Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-20 16:04 [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Patrice Chotard
2022-09-20 16:04 ` [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot Patrice Chotard
2022-09-26 12:50 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 2/7] configs: stm32f769-disco: " Patrice Chotard
2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 3/7] configs: stm32746g-eval: " Patrice Chotard
2022-09-26 12:57 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR Patrice Chotard
2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 5/7] configs: stm32746g-eval: " Patrice Chotard
2022-09-26 12:58 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size Patrice Chotard
2022-09-26 13:05 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 16:04 ` [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag Patrice Chotard
2022-09-26 13:02 ` Patrick DELAUNAY
2022-09-26 15:56 ` Patrice CHOTARD
2022-09-20 21:28 ` [PATCH v2 0/7] SPL fixes for STM32F7 MCUs Waldemar Brodkorb
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).