From: Siew Chin Lim <elly.siew.chin.lim@intel.com>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marex@denx.de>, Ley Foon Tan <lftan.linux@gmail.com>,
Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>,
Tien Fong Chee <tien.fong.chee@intel.com>,
Dalon Westergreen <dalon.westergreen@intel.com>,
Simon Glass <sjg@chromium.org>,
Yau Wai Gan <yau.wai.gan@intel.com>,
Siew Chin Lim <elly.siew.chin.lim@intel.com>
Subject: [v3 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function
Date: Sun, 13 Jun 2021 16:48:36 +0800 [thread overview]
Message-ID: <20210613084852.30868-2-elly.siew.chin.lim@intel.com> (raw)
In-Reply-To: <20210613084852.30868-1-elly.siew.chin.lim@intel.com>
Move 'linux_qspi_enable' from bootcommand to board_prep_linux function when
OS booted from FIT image for Stratix 10 and Agilex. This flow is common for
all Intel SOC64 devices.
U-Boot will update 'fdt_addr' environment value based on FIT image in
board_prep_linux function, and 'linux_qspi_enable' will refer to 'fdt_addr'
environment value to retrieve the device tree node.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
---
arch/arm/mach-socfpga/board.c | 17 +++++++++--------
configs/socfpga_agilex_atf_defconfig | 2 +-
configs/socfpga_stratix10_atf_defconfig | 2 +-
3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
index 650122fcd4..f5a3f2ad62 100644
--- a/arch/arm/mach-socfpga/board.c
+++ b/arch/arm/mach-socfpga/board.c
@@ -115,17 +115,18 @@ void board_fit_image_post_process(void **p_image, size_t *p_size)
#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT)
void board_prep_linux(bootm_headers_t *images)
{
- if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) &&
- !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) {
- /*
- * Ensure the OS is always booted from FIT and with
- * VAB signed certificate
- */
- if (!images->fit_uname_cfg) {
+ if (!images->fit_uname_cfg) {
+ if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) &&
+ !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) {
+ /*
+ * Ensure the OS is always booted from FIT and with
+ * VAB signed certificate
+ */
printf("Please use FIT with VAB signed images!\n");
hang();
}
-
+ } else {
+ /* Update fdt_addr in enviroment variable */
env_set_hex("fdt_addr", (ulong)images->ft_addr);
debug("images->ft_addr = 0x%08lx\n", (ulong)images->ft_addr);
}
diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig
index 29e3fb865e..a4b9c23919 100644
--- a/configs/socfpga_agilex_atf_defconfig
+++ b/configs/socfpga_agilex_atf_defconfig
@@ -22,7 +22,7 @@ CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run linux_qspi_enable; run mmcfitboot"
+CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot"
CONFIG_SPL_CRC32_SUPPORT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig
index 9f2f220c3a..3a05d4f486 100644
--- a/configs/socfpga_stratix10_atf_defconfig
+++ b/configs/socfpga_stratix10_atf_defconfig
@@ -22,7 +22,7 @@ CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run linux_qspi_enable; run mmcfitboot"
+CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot"
CONFIG_SPL_CRC32_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_ATF=y
--
2.19.0
next prev parent reply other threads:[~2021-06-13 8:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-13 8:48 [v3 00/17] Add Intel N5X SoC support Siew Chin Lim
2021-06-13 8:48 ` Siew Chin Lim [this message]
2021-06-13 8:48 ` [v3 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h Siew Chin Lim
2021-06-13 8:48 ` [v3 03/17] arm: socfpga: Add base address for Intel N5X device Siew Chin Lim
2021-06-13 8:48 ` [v3 04/17] arm: socfpga: Add handoff data support " Siew Chin Lim
2021-07-08 16:15 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 05/17] drivers: clk: Add clock driver " Siew Chin Lim
2021-07-08 16:17 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 06/17] arm: socfpga: Get clock manager base address " Siew Chin Lim
2021-06-13 8:48 ` [v3 07/17] drivers: clk: Add memory clock driver " Siew Chin Lim
2021-07-08 16:19 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h Siew Chin Lim
2021-06-13 8:48 ` [v3 09/17] arm: socfpga: Add clock manager for Intel N5X device Siew Chin Lim
2021-06-13 8:48 ` [v3 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c Siew Chin Lim
2021-06-13 8:48 ` [v3 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB Siew Chin Lim
2021-06-13 8:48 ` [v3 12/17] ddr: altera: Add SDRAM driver for Intel N5X device Siew Chin Lim
2021-07-08 17:06 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 13/17] arm: socfpga: Add SPL " Siew Chin Lim
2021-06-13 8:48 ` [v3 14/17] board: intel: Add socdk board support " Siew Chin Lim
2021-06-13 8:48 ` [v3 15/17] arm: dts: Add base dtsi and devkit dts " Siew Chin Lim
2021-07-08 16:32 ` Ley Foon Tan
2021-07-09 1:10 ` Lim, Elly Siew Chin
2021-06-13 8:48 ` [v3 16/17] include: configs: Add Intel N5X device CONFIGs Siew Chin Lim
2021-06-13 8:48 ` [v3 17/17] arm: socfpga: Enable Intel N5X device build Siew Chin Lim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210613084852.30868-2-elly.siew.chin.lim@intel.com \
--to=elly.siew.chin.lim@intel.com \
--cc=dalon.westergreen@intel.com \
--cc=lftan.linux@gmail.com \
--cc=marex@denx.de \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sjg@chromium.org \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=yau.wai.gan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).