From: Siew Chin Lim <elly.siew.chin.lim@intel.com>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marex@denx.de>, Ley Foon Tan <lftan.linux@gmail.com>,
Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>,
Tien Fong Chee <tien.fong.chee@intel.com>,
Dalon Westergreen <dalon.westergreen@intel.com>,
Simon Glass <sjg@chromium.org>,
Yau Wai Gan <yau.wai.gan@intel.com>,
Siew Chin Lim <elly.siew.chin.lim@intel.com>
Subject: [v3 16/17] include: configs: Add Intel N5X device CONFIGs
Date: Sun, 13 Jun 2021 16:48:51 +0800 [thread overview]
Message-ID: <20210613084852.30868-17-elly.siew.chin.lim@intel.com> (raw)
In-Reply-To: <20210613084852.30868-1-elly.siew.chin.lim@intel.com>
Add CONFIGs for N5X.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
---
include/configs/socfpga_n5x_socdk.h | 45 +++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 include/configs/socfpga_n5x_socdk.h
diff --git a/include/configs/socfpga_n5x_socdk.h b/include/configs/socfpga_n5x_socdk.h
new file mode 100644
index 0000000000..c295e91e3d
--- /dev/null
+++ b/include/configs/socfpga_n5x_socdk.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020-2021 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef __CONFIG_SOCFGPA_N5X_H__
+#define __CONFIG_SOCFGPA_N5X_H__
+
+#include <configs/socfpga_soc64_common.h>
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "bootfile=" CONFIG_BOOTFILE "\0" \
+ "fdt_addr=1100000\0" \
+ "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "mmcroot=/dev/mmcblk0p2\0" \
+ "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${mmcroot} rw rootwait;" \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "mmcload=mmc rescan;" \
+ "load mmc 0:1 ${loadaddr} ${bootfile};" \
+ "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+ "mmcfitboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${mmcroot} rw rootwait;" \
+ "bootm ${loadaddr}\0" \
+ "mmcfitload=mmc rescan;" \
+ "load mmc 0:1 ${loadaddr} ${bootfile}\0" \
+ "ramboot=setenv bootargs " CONFIG_BOOTARGS";" \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "linux_qspi_enable=if sf probe; then " \
+ "echo Enabling QSPI at Linux DTB...;" \
+ "fdt addr ${fdt_addr}; fdt resize;" \
+ "fdt set /soc/spi@ff8d2000 status okay;" \
+ "if fdt set /soc/clocks/qspi-clk clock-frequency" \
+ " ${qspi_clock}; then" \
+ " else fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency" \
+ " ${qspi_clock}; fi; fi\0" \
+ "scriptaddr=0x02100000\0" \
+ "scriptfile=u-boot.scr\0" \
+ "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
+ "then source ${scriptaddr}; fi\0"
+
+#endif /* __CONFIG_SOCFGPA_N5X_H__ */
--
2.19.0
next prev parent reply other threads:[~2021-06-13 8:52 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-13 8:48 [v3 00/17] Add Intel N5X SoC support Siew Chin Lim
2021-06-13 8:48 ` [v3 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function Siew Chin Lim
2021-06-13 8:48 ` [v3 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h Siew Chin Lim
2021-06-13 8:48 ` [v3 03/17] arm: socfpga: Add base address for Intel N5X device Siew Chin Lim
2021-06-13 8:48 ` [v3 04/17] arm: socfpga: Add handoff data support " Siew Chin Lim
2021-07-08 16:15 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 05/17] drivers: clk: Add clock driver " Siew Chin Lim
2021-07-08 16:17 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 06/17] arm: socfpga: Get clock manager base address " Siew Chin Lim
2021-06-13 8:48 ` [v3 07/17] drivers: clk: Add memory clock driver " Siew Chin Lim
2021-07-08 16:19 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h Siew Chin Lim
2021-06-13 8:48 ` [v3 09/17] arm: socfpga: Add clock manager for Intel N5X device Siew Chin Lim
2021-06-13 8:48 ` [v3 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c Siew Chin Lim
2021-06-13 8:48 ` [v3 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB Siew Chin Lim
2021-06-13 8:48 ` [v3 12/17] ddr: altera: Add SDRAM driver for Intel N5X device Siew Chin Lim
2021-07-08 17:06 ` Ley Foon Tan
2021-06-13 8:48 ` [v3 13/17] arm: socfpga: Add SPL " Siew Chin Lim
2021-06-13 8:48 ` [v3 14/17] board: intel: Add socdk board support " Siew Chin Lim
2021-06-13 8:48 ` [v3 15/17] arm: dts: Add base dtsi and devkit dts " Siew Chin Lim
2021-07-08 16:32 ` Ley Foon Tan
2021-07-09 1:10 ` Lim, Elly Siew Chin
2021-06-13 8:48 ` Siew Chin Lim [this message]
2021-06-13 8:48 ` [v3 17/17] arm: socfpga: Enable Intel N5X device build Siew Chin Lim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210613084852.30868-17-elly.siew.chin.lim@intel.com \
--to=elly.siew.chin.lim@intel.com \
--cc=dalon.westergreen@intel.com \
--cc=lftan.linux@gmail.com \
--cc=marex@denx.de \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sjg@chromium.org \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=yau.wai.gan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).