Re: [PATCH v2] board: freescale: p1_p2_rdb_pc: Simplify SPL offset macros

["Pali Rohár" <pali@kernel.org>]

On Tuesday 28 June 2022 14:17:42 Tom Rini wrote:
> On Tue, Jun 28, 2022 at 07:53:55PM +0200, Pali Rohár wrote:
> 
> > Now when CONFIG_SYS_TEXT_BASE has sane value, use it for calculation of
> > other SPL offset values: CONFIG_SPL_MAX_SIZE, CONFIG_SYS_MMC_U_BOOT_* and
> > CONFIG_SYS_SPI_FLASH_U_BOOT_* macros.
> > 
> > No functional change.
> > 
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > ---
> > Changes in v2:
> > * Rebased on top of the U-Boot next branch, commit d61c11b8c894fad517677dc51ee82d1eade39c01
> > ---
> >  include/configs/p1_p2_rdb_pc.h | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
> > index 56a16502dcc7..7237e3c1a63c 100644
> > --- a/include/configs/p1_p2_rdb_pc.h
> > +++ b/include/configs/p1_p2_rdb_pc.h
> > @@ -78,15 +78,15 @@
> >  
> >  #ifdef CONFIG_SDCARD
> >  #define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
> > -#define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
> > -#define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
> > -#define CONFIG_SYS_MMC_U_BOOT_OFFS	(128 << 10)
> > +#define CONFIG_SYS_MMC_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
> > +#define CONFIG_SYS_MMC_U_BOOT_START	CONFIG_SYS_TEXT_BASE
> > +#define CONFIG_SYS_MMC_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
> >  #define CONFIG_SYS_MPC85XX_NO_RESETVEC
> >  #elif defined(CONFIG_SPIFLASH)
> >  #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE	(768 << 10)
> > -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		(0x11000000)
> > -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	(0x11000000)
> > -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	(128 << 10)
> > +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST		CONFIG_SYS_TEXT_BASE
> > +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START	CONFIG_SYS_TEXT_BASE
> > +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
> >  #define CONFIG_SYS_MPC85XX_NO_RESETVEC
> >  #elif defined(CONFIG_MTD_RAW_NAND)
> >  #ifdef CONFIG_TPL_BUILD
> 
> So, this is entirely a PowerPC spl set of CONFIG variables.  Can we move
> them to Kconfig, and use default xxx as you're changing them to above?
> The other platforms using this look to be doing the same at first
> glance.
> 
> -- 
> Tom

Not sure how to do it right now. CONFIG_SYS_MMC_U_BOOT_OFFS would need
to be adjusted by size of boot sector, as is in this patch:
https://patchwork.ozlabs.org/project/uboot/patch/20220405134032.704-3-pali@kernel.org/

So I just sent patch in current form which simplify definitions of
CONFIG_SYS_MMC_U_BOOT_* and CONFIG_SYS_SPI_FLASH_U_BOOT_* macros.