* [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service
@ 2015-06-25 6:30 Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
` (18 more replies)
0 siblings, 19 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
This patchset implemented the COLO feature for Xen.
For detail/install/use of COLO feature, refer to:
http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
This patchset is based on:
[PATCH v3 COLOPre 00/26] Prerequisite patches for COLO
and on:
http://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/libxl-migv2-v1
Note that I did compile test only because Libxl migration v2 is in
experimental and Remus failover on Libxl migration v2 need to be fixed.
We only support hvm guest now. The codes are also hosted on github:
https://github.com/macrosheep/xen/tree/colo-v7
Changelog from v6 to v7:
1. Ported to Libxl migration v2
2. Send dirty bitmap from secondary to primary on libxc side
3. Address review comments
Changelog from v5 to v6:
1. based on migration v2(libxc)
2. split the patchset into prerequisite patchset and this main patchset.
Changelog from v4 to v5:
1. rebase to the latest xen upstream
2. disk replication: blktap2->qdisk
3. nic replication: colo-agent->colo-proxy
Changelog from v3 to v4:
1. rebase to newest xen
2. bug fix
Changlog from v2 to v3:
1. rebase to newest remus
2. add nic replication support
Changlog from v1 to v2:
1. rebase to newest remus
2. add disk replication support
Wen Congyang (8):
tools/libxl: handle colo_context records in a libxl migration v2
stream
tools/libxl: write colo_context records into the stream
secondary vm suspend/resume/checkpoint code
primary vm suspend/resume/checkpoint code
send store mfn and console mfn to xl before resuming secondary vm
implement the cmdline for COLO
Support colo mode for qemu disk
COLO: use qemu block replication
Yang Hongyang (10):
docs: add colo readme
libxc/restore: support COLO restore
libxc/restore: send dirty bitmap to primary when checkpoint under colo
libxc/save: support COLO save
COLO proxy: implement setup/teardown of COLO proxy module
COLO proxy: preresume, postresume and checkpoint
COLO nic: implement COLO nic subkind
setup and control colo proxy on primary side
setup and control colo proxy on secondary side
cmdline switches and config vars to control colo-proxy
docs/README.colo | 9 +
docs/man/xl.conf.pod.5 | 6 +
docs/man/xl.pod.1 | 11 +-
docs/misc/xl-disk-configuration.txt | 38 ++
tools/hotplug/Linux/Makefile | 1 +
tools/hotplug/Linux/colo-proxy-setup | 131 +++++
tools/libxc/include/xenguest.h | 8 +
tools/libxc/xc_sr_common.h | 25 +-
tools/libxc/xc_sr_restore.c | 184 ++++++
tools/libxc/xc_sr_save.c | 104 +++-
tools/libxl/Makefile | 4 +
tools/libxl/libxl.c | 77 ++-
tools/libxl/libxl_colo.h | 42 ++
tools/libxl/libxl_colo_nic.c | 317 +++++++++++
tools/libxl/libxl_colo_proxy.c | 267 +++++++++
tools/libxl/libxl_colo_qdisk.c | 209 +++++++
tools/libxl/libxl_colo_restore.c | 1022 ++++++++++++++++++++++++++++++++++
tools/libxl/libxl_colo_save.c | 705 +++++++++++++++++++++++
tools/libxl/libxl_create.c | 152 ++++-
tools/libxl/libxl_device.c | 38 ++
tools/libxl/libxl_dm.c | 262 ++++++++-
tools/libxl/libxl_dom_save.c | 13 +-
tools/libxl/libxl_internal.h | 172 ++++--
tools/libxl/libxl_qmp.c | 31 ++
tools/libxl/libxl_save_callout.c | 7 +-
tools/libxl/libxl_save_msgs_gen.pl | 2 +-
tools/libxl/libxl_stream_read.c | 51 ++
tools/libxl/libxl_stream_write.c | 92 +++
tools/libxl/libxl_types.idl | 8 +
tools/libxl/libxlu_disk_l.l | 5 +
tools/libxl/xl.c | 3 +
tools/libxl/xl.h | 1 +
tools/libxl/xl_cmdimpl.c | 101 +++-
tools/libxl/xl_cmdtable.c | 4 +-
34 files changed, 4007 insertions(+), 95 deletions(-)
create mode 100644 docs/README.colo
create mode 100755 tools/hotplug/Linux/colo-proxy-setup
create mode 100644 tools/libxl/libxl_colo.h
create mode 100644 tools/libxl/libxl_colo_nic.c
create mode 100644 tools/libxl/libxl_colo_proxy.c
create mode 100644 tools/libxl/libxl_colo_qdisk.c
create mode 100644 tools/libxl/libxl_colo_restore.c
create mode 100644 tools/libxl/libxl_colo_save.c
--
1.9.1
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 01/18] docs: add colo readme
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
@ 2015-06-25 6:30 ` Yang Hongyang
2015-07-14 15:15 ` Ian Campbell
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
` (17 subsequent siblings)
18 siblings, 1 reply; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
add colo readme, refer to
http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
docs/README.colo | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 docs/README.colo
diff --git a/docs/README.colo b/docs/README.colo
new file mode 100644
index 0000000..466eb72
--- /dev/null
+++ b/docs/README.colo
@@ -0,0 +1,9 @@
+COLO FT/HA (COarse-grain LOck-stepping Virtual Machines for Non-stop Service)
+project is a high availability solution. Both primary VM (PVM) and secondary VM
+(SVM) run in parallel. They receive the same request from client, and generate
+response in parallel too. If the response packets from PVM and SVM are
+identical, they are released immediately. Otherwise, a VM checkpoint (on demand)
+is conducted.
+
+See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
+for details.
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
@ 2015-06-25 6:30 ` Yang Hongyang
2015-07-14 15:19 ` Ian Campbell
2015-06-25 6:30 ` [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream Yang Hongyang
` (16 subsequent siblings)
18 siblings, 1 reply; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
tools/libxl/libxl_internal.h | 3 +++
tools/libxl/libxl_stream_read.c | 51 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 840734d..7f591ee 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3249,6 +3249,7 @@ struct libxl__stream_read_state {
int joined_rc;
bool running;
bool in_checkpoint;
+ bool in_colo_context;
libxl__datacopier_state dc;
size_t expected_len;
libxl_sr_hdr hdr;
@@ -3263,6 +3264,8 @@ _hidden void libxl__stream_read_continue(libxl__egc *egc,
libxl__stream_read_state *stream);
_hidden void libxl__stream_read_start_checkpoint(
libxl__egc *egc, libxl__stream_read_state *stream);
+_hidden void libxl__stream_read_colo_context(
+ libxl__egc *egc, libxl__stream_read_state *stream);
_hidden void libxl__stream_read_abort(libxl__egc *egc,
libxl__stream_read_state *stream, int rc);
diff --git a/tools/libxl/libxl_stream_read.c b/tools/libxl/libxl_stream_read.c
index 72a9972..d1c2d20 100644
--- a/tools/libxl/libxl_stream_read.c
+++ b/tools/libxl/libxl_stream_read.c
@@ -93,6 +93,13 @@ static void emulator_padding_done(libxl__egc *egc,
static void checkpoint_done(libxl__egc *egc,
libxl__stream_read_state *stream, int rc);
+static void handle_colo_context(libxl__egc *egc,
+ libxl__stream_read_state *stream);
+
+/* Error handling for colo context mini-loop */
+static void colo_context_done(libxl__egc *egc,
+ libxl__stream_read_state *stream, int rc);
+
void libxl__stream_read_start(libxl__egc *egc,
libxl__stream_read_state *stream)
{
@@ -190,6 +197,7 @@ void libxl__stream_read_start_checkpoint(libxl__egc *egc,
assert(stream->running);
assert(!stream->in_checkpoint);
assert(!stream->back_channel);
+ assert(!stream->in_colo_context);
stream->in_checkpoint = true;
/* Read a record header. */
@@ -211,6 +219,17 @@ void libxl__stream_read_start_checkpoint(libxl__egc *egc,
stream_failed(egc, stream, ret);
}
+void libxl__stream_read_colo_context(libxl__egc *egc,
+ libxl__stream_read_state *stream)
+{
+ assert(stream->running);
+ assert(!stream->in_checkpoint);
+ assert(!stream->in_colo_context);
+ stream->in_colo_context = true;
+
+ libxl__stream_read_continue(egc, stream);
+}
+
void libxl__stream_read_abort(libxl__egc *egc,
libxl__stream_read_state *stream, int rc)
{
@@ -240,6 +259,12 @@ static void stream_failed(libxl__egc *egc,
return;
}
+ if (stream->in_colo_context) {
+ assert(rc < 0);
+ colo_context_done(egc, stream, rc);
+ return;
+ }
+
if (stream->back_channel) {
stream->completion_callback(egc, stream, rc);
return;
@@ -259,6 +284,7 @@ static void stream_done(libxl__egc *egc,
assert(!stream->running);
assert(!stream->in_checkpoint);
assert(!stream->back_channel);
+ assert(!stream->in_colo_context);
if (stream->v2_carefd)
libxl__carefd_close(stream->v2_carefd);
@@ -531,6 +557,15 @@ static void process_record(libxl__egc *egc,
checkpoint_done(egc, stream, 0);
break;
+ case REC_TYPE_COLO_CONTEXT:
+ if (!stream->in_colo_context) {
+ LOG(ERROR, "Unexpected COLO_CONTEXT record in stream");
+ ret = ERROR_FAIL;
+ goto err;
+ }
+ handle_colo_context(egc, stream);
+ break;
+
default:
LOG(ERROR, "Unrecognised record 0x%08x", rec_hdr->type);
ret = ERROR_FAIL;
@@ -671,6 +706,14 @@ static void emulator_padding_done(libxl__egc *egc,
stream_failed(egc, stream, ret);
}
+static void handle_colo_context(libxl__egc *egc,
+ libxl__stream_read_state *stream)
+{
+ libxl_sr_colo_context *colo_context = stream->rec_body;
+
+ colo_context_done(egc, stream, colo_context->id);
+}
+
static void checkpoint_done(libxl__egc *egc,
libxl__stream_read_state *stream, int rc)
{
@@ -679,6 +722,14 @@ static void checkpoint_done(libxl__egc *egc,
stream->read_records_callback(egc, stream, rc);
}
+static void colo_context_done(libxl__egc *egc,
+ libxl__stream_read_state *stream, int rc)
+{
+ assert(stream->in_colo_context);
+ stream->in_colo_context = false;
+ stream->read_records_callback(egc, stream, rc);
+}
+
/*
* Local variables:
* mode: C
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
@ 2015-06-25 6:30 ` Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code Yang Hongyang
` (15 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
tools/libxl/libxl_internal.h | 4 ++
tools/libxl/libxl_stream_write.c | 92 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 96 insertions(+)
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 7f591ee..1ef6fc8 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2905,6 +2905,7 @@ struct libxl__stream_write_state {
size_t padding;
bool running;
bool in_checkpoint;
+ bool in_colo_context;
libxl__datacopier_state dc;
};
@@ -2913,6 +2914,9 @@ _hidden void libxl__stream_write_start(libxl__egc *egc,
_hidden void libxl__stream_write_start_checkpoint(
libxl__egc *egc, libxl__stream_write_state *stream);
+_hidden void libxl__stream_write_colo_context(
+ libxl__egc *egc, libxl__stream_write_state *stream,
+ libxl_sr_colo_context *colo_context);
_hidden void libxl__stream_write_abort(libxl__egc *egc,
libxl__stream_write_state *stream,
diff --git a/tools/libxl/libxl_stream_write.c b/tools/libxl/libxl_stream_write.c
index 3f981f0..a445189 100644
--- a/tools/libxl/libxl_stream_write.c
+++ b/tools/libxl/libxl_stream_write.c
@@ -107,6 +107,15 @@ static void checkpoint_end_record_done(libxl__egc *egc,
libxl__datacopier_state *dc,
int onwrite, int errnoval);
+static void write_colo_context(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ libxl_sr_colo_context *colo_context);
+static void write_colo_context_done(libxl__egc *egc,
+ libxl__datacopier_state *dc,
+ int onwrite, int errnoval);
+static void colo_context_done(libxl__egc *egc,
+ libxl__stream_write_state *stream, int rc);
+
void libxl__stream_write_start(libxl__egc *egc,
libxl__stream_write_state *stream)
{
@@ -154,11 +163,24 @@ void libxl__stream_write_start_checkpoint(libxl__egc *egc,
assert(stream->running);
assert(!stream->in_checkpoint);
assert(!stream->back_channel);
+ assert(!stream->in_colo_context);
stream->in_checkpoint = true;
write_toolstack_record(egc, stream);
}
+void libxl__stream_write_colo_context(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ libxl_sr_colo_context *colo_context)
+{
+ assert(stream->running);
+ assert(!stream->in_checkpoint);
+ assert(!stream->in_colo_context);
+ stream->in_colo_context = true;
+
+ write_colo_context(egc, stream, colo_context);
+}
+
void libxl__stream_write_abort(libxl__egc *egc,
libxl__stream_write_state *stream, int rc)
{
@@ -171,6 +193,7 @@ static void stream_success(libxl__egc *egc, libxl__stream_write_state *stream)
stream->running = false;
assert(!stream->in_checkpoint);
+ assert(!stream->in_colo_context);
stream_done(egc, stream);
}
@@ -189,6 +212,11 @@ static void stream_failed(libxl__egc *egc,
return;
}
+ if (stream->in_colo_context) {
+ colo_context_done(egc, stream, rc);
+ return;
+ }
+
if (stream->back_channel) {
stream->completion_callback(egc, stream, rc);
return;
@@ -207,6 +235,7 @@ static void stream_done(libxl__egc *egc,
assert(!stream->running);
assert(!stream->in_checkpoint);
+ assert(!stream->in_colo_context);
check_stream_finished(egc, dss, stream->rc, "stream");
}
@@ -544,6 +573,61 @@ static void emulator_padding_done(libxl__egc *egc,
stream_failed(egc, stream, ret);
}
+static void write_colo_context(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ libxl_sr_colo_context *colo_context)
+{
+ libxl__datacopier_state *dc = &stream->dc;
+ STATE_AO_GC(stream->ao);
+ struct libxl_sr_rec_hdr rec = { REC_TYPE_COLO_CONTEXT, 0 };
+ int ret = 0;
+ uint32_t padding_len;
+
+ dc->copywhat = "colo context record";
+ dc->writewhat = "save/migration stream";
+ dc->callback = write_colo_context_done;
+
+ ret = libxl__datacopier_start(dc);
+ if (ret)
+ goto err;
+
+ rec.length = sizeof(*colo_context);
+
+ libxl__datacopier_prefixdata(egc, dc, &rec, sizeof(rec));
+ libxl__datacopier_prefixdata(egc, dc, colo_context, rec.length);
+
+ padding_len = ROUNDUP(rec.length, REC_ALIGN_ORDER) - rec.length;
+ if (padding_len)
+ libxl__datacopier_prefixdata(egc, dc, zero_padding, padding_len);
+
+ return;
+
+ err:
+ assert(ret);
+ stream_failed(egc, stream, ret);
+}
+
+static void write_colo_context_done(libxl__egc *egc,
+ libxl__datacopier_state *dc,
+ int onwrite, int errnoval)
+{
+ libxl__stream_write_state *stream = CONTAINER_OF(dc, *stream, dc);
+ STATE_AO_GC(stream->ao);
+ int ret = 0;
+
+ if (onwrite || errnoval) {
+ ret = ERROR_FAIL;
+ goto err;
+ }
+
+ colo_context_done(egc, stream, 0);
+ return;
+
+ err:
+ assert(ret);
+ stream_failed(egc, stream, ret);
+}
+
static void write_end_record(libxl__egc *egc,
libxl__stream_write_state *stream)
{
@@ -645,6 +729,14 @@ static void checkpoint_end_record_done(libxl__egc *egc,
stream_failed(egc, stream, ret);
}
+static void colo_context_done(libxl__egc *egc,
+ libxl__stream_write_state *stream, int rc)
+{
+ assert(stream->in_colo_context);
+ stream->in_colo_context = false;
+ stream->write_records_callback(egc, stream, rc);
+}
+
/*
* Local variables:
* mode: C
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (2 preceding siblings ...)
2015-06-25 6:30 ` [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream Yang Hongyang
@ 2015-06-25 6:30 ` Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 05/18] primary " Yang Hongyang
` (14 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Secondary vm is running in colo mode. So we will do
the following things again and again:
1. Resume secondary vm
a. Send LIBXL_COLO_SVM_READY to master.
b. If it is not the first resume, call libxl__checkpoint_devices_preresume().
c. If it is the first resume(resume right after live migration),
- call libxl__xc_domain_restore_done() to build the secondary vm.
- enable secondary vm's logdirty.
- call libxl__domain_resume() to resume secondary vm.
- call libxl__checkpoint_devices_setup() to setup checkpoint devices.
d. Send LIBXL_COLO_SVM_RESUMED to master.
2. Wait a new checkpoint
a. Call libxl__checkpoint_devices_commit().
b. Read LIBXL_COLO_NEW_CHECKPOINT from master.
3. Suspend secondary vm
a. Suspend secondary vm.
b. Call libxl__checkpoint_devices_postsuspend().
c. Send LIBXL_COLO_SVM_SUSPENDED to master.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo.h | 38 ++
tools/libxl/libxl_colo_restore.c | 989 +++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_create.c | 111 ++++-
tools/libxl/libxl_internal.h | 19 +
tools/libxl/libxl_save_callout.c | 7 +-
6 files changed, 1163 insertions(+), 2 deletions(-)
create mode 100644 tools/libxl/libxl_colo.h
create mode 100644 tools/libxl/libxl_colo_restore.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 2f4efd4..66ae63d 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -57,6 +57,7 @@ LIBXL_OBJS-y += libxl_nonetbuffer.o
endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
+LIBXL_OBJS-y += libxl_colo_restore.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
new file mode 100644
index 0000000..91df275
--- /dev/null
+++ b/tools/libxl/libxl_colo.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#ifndef LIBXL_COLO_H
+#define LIBXL_COLO_H
+
+/*
+ * values to control suspend/resume primary vm and secondary vm
+ * at the same time
+ */
+enum {
+ LIBXL_COLO_NEW_CHECKPOINT = 1,
+ LIBXL_COLO_SVM_SUSPENDED,
+ LIBXL_COLO_SVM_READY,
+ LIBXL_COLO_SVM_RESUMED,
+};
+
+extern void libxl__colo_restore_done(libxl__egc *egc, void *dcs_void,
+ int ret, int retval, int errnoval);
+extern void libxl__colo_restore_setup(libxl__egc *egc,
+ libxl__colo_restore_state *crs);
+extern void libxl__colo_restore_teardown(libxl__egc *egc,
+ libxl__colo_restore_state *crs,
+ int rc);
+
+#endif
diff --git a/tools/libxl/libxl_colo_restore.c b/tools/libxl/libxl_colo_restore.c
new file mode 100644
index 0000000..40fd170
--- /dev/null
+++ b/tools/libxl/libxl_colo_restore.c
@@ -0,0 +1,989 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ * Yang Hongyang <yanghy@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include "libxl_colo.h"
+#include "libxl_sr_stream_format.h"
+
+enum {
+ LIBXL_COLO_SETUPED,
+ LIBXL_COLO_SUSPENDED,
+ LIBXL_COLO_RESUMED,
+};
+
+typedef struct libxl__colo_restore_checkpoint_state libxl__colo_restore_checkpoint_state;
+struct libxl__colo_restore_checkpoint_state {
+ libxl__domain_suspend_state dsps;
+ libxl__logdirty_switch lds;
+ libxl__colo_restore_state *crs;
+ libxl__stream_write_state sws;
+ int status;
+ bool preresume;
+ /* used for teardown */
+ int teardown_devices;
+ int saved_rc;
+
+ void (*callback)(libxl__egc *,
+ libxl__colo_restore_checkpoint_state *,
+ int);
+};
+
+
+static void libxl__colo_restore_domain_resume_callback(void *data);
+static void libxl__colo_restore_domain_checkpoint_callback(void *data);
+static void libxl__colo_restore_domain_should_checkpoint_callback(void *data);
+static void libxl__colo_restore_domain_suspend_callback(void *data);
+
+static const libxl__checkpoint_device_instance_ops *colo_restore_ops[] = {
+ NULL,
+};
+
+/* ===================== colo: common functions ===================== */
+static void colo_enable_logdirty(libxl__colo_restore_state *crs, libxl__egc *egc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ const uint32_t domid = crs->domid;
+ libxl__logdirty_switch *const lds = &crcs->lds;
+
+ STATE_AO_GC(crs->ao);
+
+ /* we need to know which pages are dirty to restore the guest */
+ if (xc_shadow_control(CTX->xch, domid,
+ XEN_DOMCTL_SHADOW_OP_ENABLE_LOGDIRTY,
+ NULL, 0, NULL, 0, NULL) < 0) {
+ LOG(ERROR, "cannot enable secondary vm's logdirty");
+ lds->callback(egc, lds, ERROR_FAIL);
+ return;
+ }
+
+ if (crs->hvm) {
+ libxl__domain_common_switch_qemu_logdirty(egc, domid, 1, lds);
+ return;
+ }
+
+ lds->callback(egc, lds, 0);
+}
+
+static void colo_disable_logdirty(libxl__colo_restore_state *crs,
+ libxl__egc *egc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ const uint32_t domid = crs->domid;
+ libxl__logdirty_switch *const lds = &crcs->lds;
+
+ STATE_AO_GC(crs->ao);
+
+ /* we need to know which pages are dirty to restore the guest */
+ if (xc_shadow_control(CTX->xch, domid, XEN_DOMCTL_SHADOW_OP_OFF,
+ NULL, 0, NULL, 0, NULL) < 0)
+ LOG(WARN, "cannot disable secondary vm's logdirty");
+
+ if (crs->hvm) {
+ libxl__domain_common_switch_qemu_logdirty(egc, domid, 0, lds);
+ return;
+ }
+
+ lds->callback(egc, lds, 0);
+}
+
+static void colo_resume_vm(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int restore_device_model)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+ int rc;
+
+ /* Convenience aliases */
+ libxl__colo_restore_state *const crs = crcs->crs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (!crs->saved_cb) {
+ /* TODO: sync mmu for hvm? */
+ if (restore_device_model) {
+ rc = libxl__domain_restore(gc, crs->domid);
+ if (rc) {
+ LOG(ERROR, "cannot restore device model for secondary vm");
+ crcs->callback(egc, crcs, rc);
+ return;
+ }
+ }
+ rc = libxl__domain_resume(gc, crs->domid, 0);
+ if (rc)
+ LOG(ERROR, "cannot resume secondary vm");
+
+ crcs->callback(egc, crcs, rc);
+ return;
+ }
+
+ /*
+ * TODO: get store mfn and console mfn
+ * We should call the callback restore_results in
+ * xc_domain_restore() before resuming the guest.
+ */
+ libxl__xc_domain_restore_done(egc, dcs, 0, 0, 0);
+
+ return;
+}
+
+static int init_device_subkind(libxl__checkpoint_devices_state *cds)
+{
+ /* init device subkind-specific state in the libxl ctx */
+ int rc;
+ STATE_AO_GC(cds->ao);
+
+ rc = 0;
+ return rc;
+}
+
+static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
+{
+ /* cleanup device subkind-specific state in the libxl ctx */
+ STATE_AO_GC(cds->ao);
+}
+
+
+/* ================ colo: setup restore environment ================ */
+static void libxl__colo_domain_create_cb(libxl__egc *egc,
+ libxl__domain_create_state *dcs,
+ int rc, uint32_t domid);
+
+static int init_dsps(libxl__domain_suspend_state *dsps)
+{
+ int rc = ERROR_FAIL;
+ libxl_domain_type type;
+
+ STATE_AO_GC(dsps->ao);
+
+ type = libxl__domain_type(gc, dsps->domid);
+ if (type == LIBXL_DOMAIN_TYPE_INVALID)
+ goto out;
+
+ libxl__xswait_init(&dsps->pvcontrol);
+ libxl__ev_evtchn_init(&dsps->guest_evtchn);
+ libxl__ev_xswatch_init(&dsps->guest_watch);
+ libxl__ev_time_init(&dsps->guest_timeout);
+
+ if (type == LIBXL_DOMAIN_TYPE_HVM)
+ dsps->hvm = 1;
+ else
+ dsps->hvm = 0;
+
+ dsps->guest_evtchn.port = -1;
+ dsps->guest_evtchn_lockfd = -1;
+ dsps->guest_responded = 0;
+ dsps->dm_savefile = libxl__device_model_savefile(gc, dsps->domid);
+
+ /* Secondary vm is not created, so we cannot get evtchn port */
+
+ rc = 0;
+
+out:
+ return rc;
+}
+
+void libxl__colo_restore_setup(libxl__egc *egc,
+ libxl__colo_restore_state *crs)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs;
+ int rc = ERROR_FAIL;
+
+ /* Convenience aliases */
+ libxl__srm_restore_autogen_callbacks *const callbacks =
+ &dcs->shs.callbacks.restore.a;
+ const int domid = crs->domid;
+
+ STATE_AO_GC(crs->ao);
+
+ GCNEW(crcs);
+ crs->crcs = crcs;
+ crcs->crs = crs;
+
+ /* setup dsps */
+ crcs->dsps.ao = ao;
+ crcs->dsps.domid = domid;
+ if (init_dsps(&crcs->dsps))
+ goto err;
+
+ callbacks->suspend = libxl__colo_restore_domain_suspend_callback;
+ callbacks->postcopy = libxl__colo_restore_domain_resume_callback;
+ callbacks->checkpoint = libxl__colo_restore_domain_checkpoint_callback;
+ callbacks->should_checkpoint = libxl__colo_restore_domain_should_checkpoint_callback;
+
+ /*
+ * Secondary vm is running in colo mode, so we need to call
+ * libxl__xc_domain_restore_done() to create secondary vm.
+ * But we will exit in domain_create_cb(). So replace the
+ * callback here.
+ */
+ crs->saved_cb = dcs->callback;
+ dcs->callback = libxl__colo_domain_create_cb;
+ crcs->status = LIBXL_COLO_SETUPED;
+
+ libxl__logdirty_init(&crcs->lds);
+ crcs->lds.ao = ao;
+
+ crcs->sws.fd = crs->send_fd;
+ crcs->sws.ao = ao;
+ crcs->sws.back_channel = true;
+
+ libxl__stream_write_start(egc, &crcs->sws);
+
+ rc = 0;
+
+out:
+ crs->callback(egc, crs, rc);
+ return;
+
+err:
+ goto out;
+}
+
+static void libxl__colo_domain_create_cb(libxl__egc *egc,
+ libxl__domain_create_state *dcs,
+ int rc, uint32_t domid)
+{
+ libxl__colo_restore_checkpoint_state *crcs = dcs->crs.crcs;
+
+ crcs->callback(egc, crcs, rc);
+}
+
+
+/* ================ colo: teardown restore environment ================ */
+static void colo_restore_teardown_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void do_failover_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state* crcs,
+ int rc);
+static void colo_disable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc);
+
+static void do_failover(libxl__egc *egc, libxl__colo_restore_state *crs)
+{
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ const int status = crcs->status;
+ libxl__logdirty_switch *const lds = &crcs->lds;
+
+ STATE_AO_GC(crs->ao);
+
+ switch(status) {
+ case LIBXL_COLO_SETUPED:
+ /* We don't enable logdirty now */
+ colo_resume_vm(egc, crcs, 0);
+ return;
+ case LIBXL_COLO_SUSPENDED:
+ case LIBXL_COLO_RESUMED:
+ /* disable logdirty first */
+ lds->callback = colo_disable_logdirty_done;
+ colo_disable_logdirty(crs, egc);
+ return;
+ default:
+ LOG(ERROR, "invalid status: %d", status);
+ crcs->callback(egc, crcs, ERROR_FAIL);
+ }
+}
+
+void libxl__colo_restore_teardown(libxl__egc *egc,
+ libxl__colo_restore_state *crs,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ EGC_GC;
+
+ /* TODO: abort the stream it it is in use. */
+
+ crcs->saved_rc = rc;
+ if (!crcs->teardown_devices) {
+ colo_restore_teardown_done(egc, &crs->cds, 0);
+ return;
+ }
+
+ crs->cds.callback = colo_restore_teardown_done;
+ libxl__checkpoint_devices_teardown(egc, &crs->cds);
+}
+
+static void colo_restore_teardown_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+
+ EGC_GC;
+
+ if (rc)
+ LOG(ERROR, "COLO: failed to teardown device for guest with domid %u,"
+ " rc %d", cds->domid, rc);
+
+ if (crcs->teardown_devices)
+ cleanup_device_subkind(cds);
+
+ rc = crcs->saved_rc;
+ if (!rc) {
+ crcs->callback = do_failover_done;
+ do_failover(egc, crs);
+ return;
+ }
+
+ if (crs->saved_cb) {
+ dcs->callback = crs->saved_cb;
+ crs->saved_cb = NULL;
+ }
+ crs->callback(egc, crs, rc);
+}
+
+static void do_failover_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state* crcs,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+
+ /* Convenience aliases */
+ libxl__colo_restore_state *const crs = crcs->crs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc)
+ LOG(ERROR, "cannot do failover");
+
+ if (crs->saved_cb) {
+ dcs->callback = crs->saved_cb;
+ crs->saved_cb = NULL;
+ }
+
+ crs->callback(egc, crs, rc);
+}
+
+static void colo_disable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs = CONTAINER_OF(lds, *crcs, lds);
+
+ STATE_AO_GC(lds->ao);
+
+ if (rc)
+ LOG(WARN, "cannot disable logdirty");
+
+ if (crcs->status == LIBXL_COLO_SUSPENDED) {
+ /*
+ * failover when reading state from master, so no need to
+ * call libxl__domain_restore().
+ */
+ colo_resume_vm(egc, crcs, 0);
+ return;
+ }
+
+ /* If we cannot disable logdirty, we still can do failover */
+ crcs->callback(egc, crcs, 0);
+}
+
+/*
+ * checkpoint callbacks are called in the following order:
+ * 1. resume
+ * 2. should_checkpoint
+ * 3. suspend
+ * 4. checkpoint
+ */
+static void colo_common_write_stream_done(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ int rc);
+static void colo_common_read_stream_done(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc);
+/* ===================== colo: resume secondary vm ===================== */
+/*
+ * Do the following things when resuming secondary vm the first time:
+ * 1. resume secondary vm
+ * 2. enable log dirty
+ * 3. setup checkpoint devices
+ * 4. write LIBXL_COLO_SVM_READY
+ * 5. unpause secondary vm
+ * 6. write LIBXL_COLO_SVM_RESUMED
+ *
+ * Do the following things when resuming secondary vm:
+ * 1. write LIBXL_COLO_SVM_READY
+ * 2. resume secondary vm
+ * 3. write LIBXL_COLO_SVM_RESUMED
+ */
+static void colo_send_svm_ready(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs);
+static void colo_send_svm_ready_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int rc);
+static void colo_restore_preresume_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_restore_resume_vm(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs);
+static void colo_resume_vm_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int rc);
+static void colo_write_svm_resumed(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs);
+static void colo_enable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int retval);
+static void colo_reenable_logdirty(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc);
+static void colo_reenable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc);
+static void colo_setup_checkpoint_devices(libxl__egc *egc,
+ libxl__colo_restore_state *crs);
+static void colo_restore_setup_cds_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_unpause_svm(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs);
+
+static void libxl__colo_restore_domain_resume_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_create_state *dcs = CONTAINER_OF(shs, *dcs, shs);
+ libxl__colo_restore_checkpoint_state *crcs = dcs->crs.crcs;
+
+ if (crcs->teardown_devices)
+ colo_send_svm_ready(shs->egc, crcs);
+ else
+ colo_restore_resume_vm(shs->egc, crcs);
+}
+
+static void colo_send_svm_ready(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs)
+{
+ libxl_sr_colo_context colo_context = { .id = COLO_SVM_READY };
+
+ crcs->callback = colo_send_svm_ready_done;
+ crcs->sws.write_records_callback = colo_common_write_stream_done;
+ libxl__stream_write_colo_context(egc, &crcs->sws, &colo_context);
+}
+
+static void colo_send_svm_ready_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int rc)
+{
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *cds = &crcs->crs->cds;
+
+ if (!crcs->preresume) {
+ crcs->preresume = true;
+ colo_unpause_svm(egc, crcs);
+ return;
+ }
+
+ cds->callback = colo_restore_preresume_cb;
+ libxl__checkpoint_devices_preresume(egc, cds);
+}
+
+static void colo_restore_preresume_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "preresume fails");
+ goto out;
+ }
+
+ colo_restore_resume_vm(egc, crcs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+static void colo_restore_resume_vm(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs)
+{
+
+ crcs->callback = colo_resume_vm_done;
+ colo_resume_vm(egc, crcs, 1);
+}
+
+static void colo_resume_vm_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+
+ /* Convenience aliases */
+ libxl__colo_restore_state *const crs = crcs->crs;
+ libxl__logdirty_switch *const lds = &crcs->lds;
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "cannot resume secondary vm");
+ goto out;
+ }
+
+ crcs->status = LIBXL_COLO_RESUMED;
+
+ /* avoid calling libxl__xc_domain_restore_done() more than once */
+ if (crs->saved_cb) {
+ dcs->callback = crs->saved_cb;
+ crs->saved_cb = NULL;
+
+ lds->callback = colo_enable_logdirty_done;
+ colo_enable_logdirty(crs, egc);
+ return;
+ }
+
+ colo_write_svm_resumed(egc, crcs);
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+static void colo_write_svm_resumed(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs)
+{
+ libxl_sr_colo_context colo_context = { .id = COLO_SVM_RESUMED };
+
+ crcs->callback = NULL;
+ crcs->sws.write_records_callback = colo_common_write_stream_done;
+ libxl__stream_write_colo_context(egc, &crcs->sws, &colo_context);
+}
+
+static void colo_enable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs = CONTAINER_OF(lds, *crcs, lds);
+
+ /* Convenience aliases */
+ libxl__colo_restore_state *const crs = crcs->crs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ /*
+ * log-dirty already enabled? There's no test op,
+ * so attempt to disable then reenable it
+ */
+ lds->callback = colo_reenable_logdirty;
+ colo_disable_logdirty(crs, egc);
+ return;
+ }
+
+ colo_setup_checkpoint_devices(egc, crs);
+}
+
+static void colo_reenable_logdirty(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs = CONTAINER_OF(lds, *crcs, lds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+
+ /* Convenience aliases */
+ libxl__colo_restore_state *const crs = crcs->crs;
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "cannot enable logdirty");
+ goto out;
+ }
+
+ lds->callback = colo_reenable_logdirty_done;
+ colo_enable_logdirty(crs, egc);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+static void colo_reenable_logdirty_done(libxl__egc *egc,
+ libxl__logdirty_switch *lds,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs = CONTAINER_OF(lds, *crcs, lds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+
+ /* Convenience aliases */
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crcs->crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "cannot enable logdirty");
+ goto out;
+ }
+
+ colo_setup_checkpoint_devices(egc, crcs->crs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+/*
+ * We cannot setup checkpoint devices in libxl__colo_restore_setup(),
+ * because the guest is not ready.
+ */
+static void colo_setup_checkpoint_devices(libxl__egc *egc,
+ libxl__colo_restore_state *crs)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *cds = &crs->cds;
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crs->ao);
+
+ /* TODO: disk/nic support */
+ cds->device_kind_flags = 0;
+ cds->callback = colo_restore_setup_cds_done;
+ cds->ao = ao;
+ cds->domid = crs->domid;
+ cds->ops = colo_restore_ops;
+
+ if (init_device_subkind(cds))
+ goto out;
+
+ crcs->teardown_devices = 1;
+
+ libxl__checkpoint_devices_setup(egc, cds);
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+static void colo_restore_setup_cds_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ /* Convenience aliases */
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(cds->ao);
+
+ if (rc) {
+ LOG(ERROR, "COLO: failed to setup device for guest with domid %u",
+ cds->domid);
+ goto out;
+ }
+
+ colo_send_svm_ready(egc, crcs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+static void colo_unpause_svm(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+ int rc;
+
+ /* Convenience aliases */
+ const uint32_t domid = crcs->crs->domid;
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ STATE_AO_GC(crcs->crs->ao);
+
+ /* We have enabled secondary vm's logdirty, so we can unpause it now */
+ rc = libxl_domain_unpause(CTX, domid);
+ if (rc) {
+ LOG(ERROR, "cannot unpause secondary vm");
+ goto out;
+ }
+
+ colo_write_svm_resumed(egc, crcs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, shs, 0);
+}
+
+
+/* ===================== colo: wait new checkpoint ===================== */
+static void colo_restore_commit_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_stream_read_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int real_size);
+
+static void libxl__colo_restore_domain_should_checkpoint_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_create_state *dcs = CONTAINER_OF(shs, *dcs, shs);
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *cds = &dcs->crs.cds;
+
+ cds->callback = colo_restore_commit_cb;
+ libxl__checkpoint_devices_commit(shs->egc, cds);
+}
+
+static void colo_restore_commit_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+
+ STATE_AO_GC(cds->ao);
+
+ if (rc) {
+ LOG(ERROR, "commit fails");
+ goto out;
+ }
+
+ crcs->callback = colo_stream_read_done;
+ dcs->srs.read_records_callback = colo_common_read_stream_done;
+ libxl__stream_read_colo_context(egc, &dcs->srs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, 0);
+}
+
+static void colo_stream_read_done(libxl__egc *egc,
+ libxl__colo_restore_checkpoint_state *crcs,
+ int id)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+ int ok = 0;
+
+ STATE_AO_GC(dcs->ao);
+
+ if (id != COLO_NEW_CHECKPOINT) {
+ LOG(ERROR, "invalid section: %d", id);
+ goto out;
+ }
+
+ ok = 1;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, ok);
+}
+
+
+/* ===================== colo: suspend secondary vm ===================== */
+/*
+ * Do the following things when resuming secondary vm:
+ * 1. suspend secondary vm
+ * 2. send LIBXL_COLO_SVM_SUSPENDED
+ */
+static void colo_suspend_vm_done(libxl__egc *egc,
+ libxl__domain_suspend_state *dsps,
+ int ok);
+static void colo_restore_postsuspend_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+
+static void libxl__colo_restore_domain_suspend_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_create_state *dcs = CONTAINER_OF(shs, *dcs, shs);
+ libxl__colo_restore_checkpoint_state *crcs = dcs->crs.crcs;
+
+ STATE_AO_GC(dcs->ao);
+
+ /* Convenience aliases */
+ libxl__domain_suspend_state *const dsps = &crcs->dsps;
+
+ /* suspend secondary vm */
+ dsps->callback_common_done = colo_suspend_vm_done;
+
+ libxl__domain_suspend(shs->egc, dsps);
+}
+
+static void colo_suspend_vm_done(libxl__egc *egc,
+ libxl__domain_suspend_state *dsps,
+ int ok)
+{
+ libxl__colo_restore_checkpoint_state *crcs = CONTAINER_OF(dsps, *crcs, dsps);
+ libxl__colo_restore_state *crs = crcs->crs;
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *cds = &crs->cds;
+
+ STATE_AO_GC(crs->ao);
+
+ if (!ok) {
+ LOG(ERROR, "cannot suspend secondary vm");
+ goto out;
+ }
+
+ crcs->status = LIBXL_COLO_SUSPENDED;
+
+ cds->callback = colo_restore_postsuspend_cb;
+ libxl__checkpoint_devices_postsuspend(egc, cds);
+
+ return;
+
+out:
+ ok = 0;
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, ok);
+}
+
+static void colo_restore_postsuspend_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ libxl__colo_restore_checkpoint_state *crcs = crs->crcs;
+ libxl_sr_colo_context colo_context = { .id = COLO_SVM_SUSPENDED };
+ int ok = 0;
+
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "postsuspend fails");
+ goto out;
+ }
+
+ crcs->callback = NULL;
+ crcs->sws.write_records_callback = colo_common_write_stream_done;
+ libxl__stream_write_colo_context(egc, &crcs->sws, &colo_context);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, ok);
+}
+
+
+/* ======================== colo: checkpoint ======================= */
+/*
+ * Do the following things when resuming secondary vm:
+ * 1. read toolstack context
+ * 2. read emulator context
+ */
+static void libxl__colo_restore_domain_checkpoint_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_create_state *dcs = CONTAINER_OF(shs, *dcs, shs);
+ libxl__colo_restore_checkpoint_state *crcs = dcs->crs.crcs;
+
+ crcs->callback = NULL;
+ dcs->srs.read_records_callback = colo_common_read_stream_done;
+ libxl__stream_read_colo_context(shs->egc, &dcs->srs);
+}
+
+/* ===================== colo: common callback ===================== */
+static void colo_common_write_stream_done(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ int rc)
+{
+ libxl__colo_restore_checkpoint_state *crcs =
+ CONTAINER_OF(stream, *crcs, sws);
+ libxl__domain_create_state *dcs = CONTAINER_OF(crcs->crs, *dcs, crs);
+ int ok;
+
+ STATE_AO_GC(stream->ao);
+
+ if (rc < 0) {
+ /* TODO: it may be a internal error, but we don't know */
+ LOG(ERROR, "sending data fails");
+ ok = 2;
+ goto out;
+ }
+
+ if (!crcs->callback) {
+ /* Everythins is OK */
+ ok = 1;
+ goto out;
+ }
+
+ crcs->callback(egc, crcs, 0);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, ok);
+}
+
+static void colo_common_read_stream_done(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(stream, *dcs, srs);
+ libxl__colo_restore_checkpoint_state *crcs = dcs->crs.crcs;
+ int ok;
+
+ STATE_AO_GC(stream->ao);
+
+ if (rc < 0) {
+ /* TODO: it may be a internal error, but we don't know */
+ LOG(ERROR, "sending data fails");
+ ok = 2;
+ goto out;
+ }
+
+ if (!crcs->callback) {
+ /* Everythins is OK */
+ ok = 1;
+ goto out;
+ }
+
+ /* rc contains the id */
+ crcs->callback(egc, crcs, rc);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dcs->shs, ok);
+}
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 342aa01..2380368 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -19,6 +19,7 @@
#include "libxl_internal.h"
#include "libxl_arch.h"
+#include "libxl_colo.h"
#include <xc_dom.h>
#include <xenguest.h>
@@ -996,6 +997,93 @@ static void domcreate_console_available(libxl__egc *egc,
dcs->aop_console_how.for_event));
}
+static void libxl__colo_restore_teardown_done(libxl__egc *egc,
+ libxl__colo_restore_state *crs,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ STATE_AO_GC(crs->ao);
+
+ /* convenience aliases */
+ libxl__save_helper_state *const shs = &dcs->shs;
+ const int domid = crs->domid;
+ const libxl_ctx *const ctx = libxl__gc_owner(gc);
+ xc_interface *const xch = ctx->xch;
+
+ if (!rc)
+ /* failover, no need to destroy the secondary vm */
+ goto out;
+
+ if (shs->retval)
+ /*
+ * shs->retval stores the return value of xc_domain_restore().
+ * If it is not 0, we have destroyed the secondary vm in
+ * xc_domain_restore();
+ */
+ goto out;
+
+ xc_domain_destroy(xch, domid);
+
+out:
+ dcs->callback(egc, dcs, rc, crs->domid);
+}
+
+void libxl__colo_restore_done(libxl__egc *egc, void *dcs_void,
+ int ret, int retval, int errnoval)
+{
+ libxl__domain_create_state *dcs = dcs_void;
+ int rc = 1;
+
+ /* convenience aliases */
+ libxl__colo_restore_state *const crs = &dcs->crs;
+ STATE_AO_GC(crs->ao);
+
+ /* teardown and failover */
+ crs->callback = libxl__colo_restore_teardown_done;
+
+ if (ret == 0 && retval == 0)
+ rc = 0;
+
+ LOG(INFO, "%s", rc ? "colo fails" : "failover");
+ libxl__colo_restore_teardown(egc, crs, rc);
+}
+
+static void libxl__colo_restore_cp_done(libxl__egc *egc,
+ libxl__colo_restore_state *crs,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+ int ok = 0;
+
+ /* convenience aliases */
+ libxl__save_helper_state *const shs = &dcs->shs;
+
+ if (!rc)
+ ok = 1;
+
+ libxl__xc_domain_saverestore_async_callback_done(shs->egc, shs, ok);
+}
+
+static void libxl__colo_restore_setup_done(libxl__egc *egc,
+ libxl__colo_restore_state *crs,
+ int rc)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(crs, *dcs, crs);
+
+ /* convenience aliases */
+ STATE_AO_GC(crs->ao);
+
+ if (rc) {
+ LOG(ERROR, "colo restore setup fails: %d", rc);
+ libxl__xc_domain_restore_done(egc, dcs, rc, 0, 0);
+ return;
+ }
+
+ crs->callback = libxl__colo_restore_cp_done;
+ /*TODO COLO*/
+ libxl__stream_read_start(egc, &dcs->srs);
+}
+
static void domcreate_bootloader_done(libxl__egc *egc,
libxl__bootloader_state *bl,
int rc)
@@ -1010,6 +1098,9 @@ static void domcreate_bootloader_done(libxl__egc *egc,
libxl__domain_build_state *const state = &dcs->build_state;
libxl__srm_restore_autogen_callbacks *const callbacks =
&dcs->shs.callbacks.restore.a;
+ const int checkpointed_stream = dcs->restore_params.checkpointed_stream;
+ libxl__colo_restore_state *const crs = &dcs->crs;
+ libxl_domain_build_info *const info = &d_config->b_info;
if (rc) {
domcreate_rebuild_done(egc, dcs, rc);
@@ -1039,6 +1130,13 @@ static void domcreate_bootloader_done(libxl__egc *egc,
/* Restore */
callbacks->checkpoint = libxl__remus_domain_restore_checkpoint_callback;
+ /* COLO only supports HVM now */
+ if (info->type != LIBXL_DOMAIN_TYPE_HVM &&
+ checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
rc = libxl__build_pre(gc, domid, d_config, state);
if (rc)
goto out;
@@ -1049,7 +1147,18 @@ static void domcreate_bootloader_done(libxl__egc *egc,
dcs->srs.back_channel = false;
dcs->srs.completion_callback = domcreate_stream_done;
- libxl__stream_read_start(egc, &dcs->srs);
+ /* colo restore setup */
+ if (checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ crs->ao = ao;
+ crs->domid = domid;
+ crs->send_fd = dcs->send_fd;
+ crs->recv_fd = restore_fd;
+ crs->hvm = (info->type == LIBXL_DOMAIN_TYPE_HVM);
+ crs->callback = libxl__colo_restore_setup_done;
+ libxl__colo_restore_setup(egc, crs);
+ } else
+ libxl__stream_read_start(egc, &dcs->srs);
+
return;
out:
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 1ef6fc8..0aafd59 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3280,6 +3280,24 @@ static inline bool libxl__stream_read_inuse(
return stream->running;
}
+/* colo related structure */
+typedef struct libxl__colo_restore_state libxl__colo_restore_state;
+typedef void libxl__colo_callback(libxl__egc *,
+ libxl__colo_restore_state *, int rc);
+struct libxl__colo_restore_state {
+ /* must set by caller of libxl__colo_(setup|teardown) */
+ libxl__ao *ao;
+ uint32_t domid;
+ int send_fd;
+ int recv_fd;
+ int hvm;
+ libxl__colo_callback *callback;
+
+ /* private, colo restore checkpoint state */
+ libxl__domain_create_cb *saved_cb;
+ void *crcs;
+ libxl__checkpoint_devices_state cds;
+};
struct libxl__domain_create_state {
/* filled in by user */
@@ -3294,6 +3312,7 @@ struct libxl__domain_create_state {
/* private to domain_create */
int guest_domid;
libxl__domain_build_state build_state;
+ libxl__colo_restore_state crs;
libxl__bootloader_state bl;
libxl__stub_dm_spawn_state dmss;
/* If we're not doing stubdom, we use only dmss.dm,
diff --git a/tools/libxl/libxl_save_callout.c b/tools/libxl/libxl_save_callout.c
index 25817d6..5f500b2 100644
--- a/tools/libxl/libxl_save_callout.c
+++ b/tools/libxl/libxl_save_callout.c
@@ -15,6 +15,7 @@
#include "libxl_osdeps.h"
#include "libxl_internal.h"
+#include "libxl_colo.h"
/* stream_fd is as from the caller (eventually, the application).
* It may be 0, 1 or 2, in which case we need to dup it elsewhere.
@@ -65,7 +66,11 @@ void libxl__xc_domain_restore(libxl__egc *egc, libxl__domain_create_state *dcs,
dcs->shs.ao = ao;
dcs->shs.domid = domid;
dcs->shs.recv_callback = libxl__srm_callout_received_restore;
- dcs->shs.completion_callback = libxl__xc_domain_restore_done;
+ if (dcs->restore_params.checkpointed_stream ==
+ LIBXL_CHECKPOINTED_STREAM_COLO)
+ dcs->shs.completion_callback = libxl__colo_restore_done;
+ else
+ dcs->shs.completion_callback = libxl__xc_domain_restore_done;
dcs->shs.caller_state = dcs;
dcs->shs.need_results = 1;
dcs->shs.toolstack_data_file = 0;
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 05/18] primary vm suspend/resume/checkpoint code
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (3 preceding siblings ...)
2015-06-25 6:30 ` [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code Yang Hongyang
@ 2015-06-25 6:30 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 06/18] libxc/restore: support COLO restore Yang Hongyang
` (13 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:30 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
We will do the following things again and again:
1. Suspend primary vm
a. Suspend primary vm
b. do postsuspend
c. Read LIBXL_COLO_SVM_SUSPENDED sent by secondary
2. Resume primary vm
a. Read LIBXL_COLO_SVM_READY from slave
b. Do presume
c. Resume primary vm
d. Read LIBXL_COLO_SVM_RESUMED from slave
3. Wait a new checkpoint
a. Wait a new checkpoint(not implemented)
b. Send LIBXL_COLO_NEW_CHECKPOINT to slave
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 6 +-
tools/libxl/libxl_colo.h | 21 +-
tools/libxl/libxl_colo_save.c | 565 ++++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_dom_save.c | 13 +-
tools/libxl/libxl_internal.h | 121 +++++----
tools/libxl/libxl_types.idl | 1 +
7 files changed, 662 insertions(+), 67 deletions(-)
create mode 100644 tools/libxl/libxl_colo_save.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 66ae63d..252c4e9 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -57,7 +57,7 @@ LIBXL_OBJS-y += libxl_nonetbuffer.o
endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
-LIBXL_OBJS-y += libxl_colo_restore.o
+LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index f851957..8b866f4 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -17,6 +17,7 @@
#include "libxl_osdeps.h"
#include "libxl_internal.h"
+#include "libxl_colo.h"
#define PAGE_TO_MEMKB(pages) ((pages) * 4)
#define BACKEND_STRING_SIZE 5
@@ -842,7 +843,10 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
assert(info);
/* Point of no return */
- libxl__remus_setup(egc, &dss->rs);
+ if (libxl_defbool_val(info->colo))
+ libxl__colo_save_setup(egc, &dss->css);
+ else
+ libxl__remus_setup(egc, &dss->rs);
return AO_INPROGRESS;
out:
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index 91df275..49a430b 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -16,17 +16,6 @@
#ifndef LIBXL_COLO_H
#define LIBXL_COLO_H
-/*
- * values to control suspend/resume primary vm and secondary vm
- * at the same time
- */
-enum {
- LIBXL_COLO_NEW_CHECKPOINT = 1,
- LIBXL_COLO_SVM_SUSPENDED,
- LIBXL_COLO_SVM_READY,
- LIBXL_COLO_SVM_RESUMED,
-};
-
extern void libxl__colo_restore_done(libxl__egc *egc, void *dcs_void,
int ret, int retval, int errnoval);
extern void libxl__colo_restore_setup(libxl__egc *egc,
@@ -35,4 +24,14 @@ extern void libxl__colo_restore_teardown(libxl__egc *egc,
libxl__colo_restore_state *crs,
int rc);
+extern void libxl__colo_save_domain_suspend_callback(void *data);
+extern void libxl__colo_save_domain_checkpoint_callback(void *data);
+extern void libxl__colo_save_domain_resume_callback(void *data);
+extern void libxl__colo_save_domain_should_checkpoint_callback(void *data);
+extern void libxl__colo_save_setup(libxl__egc *egc,
+ libxl__colo_save_state *css);
+extern void libxl__colo_save_teardown(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int rc);
+
#endif
diff --git a/tools/libxl/libxl_colo_save.c b/tools/libxl/libxl_colo_save.c
new file mode 100644
index 0000000..4e059cc
--- /dev/null
+++ b/tools/libxl/libxl_colo_save.c
@@ -0,0 +1,565 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ * Yang Hongyang <yanghy@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include "libxl_colo.h"
+
+static const libxl__checkpoint_device_instance_ops *colo_ops[] = {
+ NULL,
+};
+
+/* ================= helper functions ================= */
+static int init_device_subkind(libxl__checkpoint_devices_state *cds)
+{
+ /* init device subkind-specific state in the libxl ctx */
+ int rc;
+ STATE_AO_GC(cds->ao);
+
+ rc = 0;
+ return rc;
+}
+
+static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
+{
+ /* cleanup device subkind-specific state in the libxl ctx */
+ STATE_AO_GC(cds->ao);
+}
+
+/* ================= colo: setup save environment ================= */
+static void colo_save_setup_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_save_setup_failed(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+
+void libxl__colo_save_setup(libxl__egc *egc, libxl__colo_save_state *css)
+{
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = &css->cds;
+
+ STATE_AO_GC(dss->ao);
+
+ if (dss->type != LIBXL_DOMAIN_TYPE_HVM) {
+ LOG(ERROR, "COLO only supports hvm now");
+ goto out;
+ }
+
+ css->send_fd = dss->fd;
+ css->recv_fd = dss->recv_fd;
+ css->svm_running = false;
+
+ /* TODO: disk/nic support */
+ cds->device_kind_flags = 0;
+ cds->ops = colo_ops;
+ cds->callback = colo_save_setup_done;
+ cds->ao = ao;
+ cds->domid = dss->domid;
+
+ css->srs.ao = ao;
+ css->srs.fd = css->recv_fd;
+ css->srs.back_channel = true;
+ libxl__stream_read_start(egc, &css->srs);
+
+ if (init_device_subkind(cds))
+ goto out;
+
+ libxl__checkpoint_devices_setup(egc, &css->cds);
+
+ return;
+
+out:
+ libxl__ao_complete(egc, ao, ERROR_FAIL);
+}
+
+static void colo_save_setup_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+ STATE_AO_GC(cds->ao);
+
+ if (!rc) {
+ libxl__domain_save(egc, dss);
+ return;
+ }
+
+ LOG(ERROR, "COLO: failed to setup device for guest with domid %u",
+ dss->domid);
+ css->cds.callback = colo_save_setup_failed;
+ libxl__checkpoint_devices_teardown(egc, &css->cds);
+}
+
+static void colo_save_setup_failed(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ STATE_AO_GC(cds->ao);
+
+ if (rc)
+ LOG(ERROR, "COLO: failed to teardown device after setup failed"
+ " for guest with domid %u, rc %d", cds->domid, rc);
+
+ cleanup_device_subkind(cds);
+ libxl__ao_complete(egc, ao, rc);
+}
+
+
+/* ================= colo: teardown save environment ================= */
+static void colo_teardown_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+
+void libxl__colo_save_teardown(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int rc)
+{
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(css->cds.ao);
+
+ LOG(WARN, "COLO: Domain suspend terminated with rc %d,"
+ " teardown COLO devices...", rc);
+ dss->css.cds.callback = colo_teardown_done;
+ libxl__checkpoint_devices_teardown(egc, &dss->css.cds);
+ return;
+}
+
+static void colo_teardown_done(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ cleanup_device_subkind(cds);
+ dss->callback(egc, dss, rc);
+}
+
+/*
+ * checkpoint callbacks are called in the following order:
+ * 1. suspend
+ * 2. resume
+ * 3. checkpoint
+ */
+static void colo_common_write_stream_done(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ int rc);
+static void colo_common_read_stream_done(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc);
+/* ===================== colo: suspend primary vm ===================== */
+
+static void colo_read_svm_suspended_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id);
+/*
+ * Do the following things when suspending primary vm:
+ * 1. suspend primary vm
+ * 2. do postsuspend
+ * 3. read LIBXL_COLO_SVM_SUSPENDED
+ * 4. read secondary vm's dirty pages
+ */
+static void colo_suspend_primary_vm_done(libxl__egc *egc,
+ libxl__domain_suspend_state *dsps,
+ int ok);
+static void colo_postsuspend_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+
+void libxl__colo_save_domain_suspend_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__egc *egc = shs->egc;
+ libxl__domain_save_state *dss = CONTAINER_OF(shs, *dss, shs);
+
+ /* Convenience aliases */
+ libxl__domain_suspend_state *dsps = &dss->dsps;
+
+ dsps->callback_common_done = colo_suspend_primary_vm_done;
+ libxl__domain_suspend(egc, dsps);
+}
+
+static void colo_suspend_primary_vm_done(libxl__egc *egc,
+ libxl__domain_suspend_state *dsps,
+ int ok)
+{
+ libxl__domain_save_state *dss = CONTAINER_OF(dsps, *dss, dsps);
+
+ STATE_AO_GC(dsps->ao);
+
+ if (!ok) {
+ LOG(ERROR, "cannot suspend primary vm");
+ goto out;
+ }
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = &dss->css.cds;
+
+ cds->callback = colo_postsuspend_cb;
+ libxl__checkpoint_devices_postsuspend(egc, cds);
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+static void colo_postsuspend_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ int ok = 0;
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(cds->ao);
+
+ if (rc) {
+ LOG(ERROR, "postsuspend fails");
+ goto out;
+ }
+
+ if (!css->svm_running) {
+ ok = 1;
+ goto out;
+ }
+
+ /*
+ * read COLO_SVM_SUSPENDED
+ */
+ css->callback = colo_read_svm_suspended_done;
+ css->srs.read_records_callback = colo_common_read_stream_done;
+ libxl__stream_read_colo_context(egc, &css->srs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+static void colo_read_svm_suspended_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id)
+{
+ int ok = 0;
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(css->cds.ao);
+
+ if (id != COLO_SVM_SUSPENDED) {
+ LOG(ERROR, "invalid section: %d, expected: %d", id, COLO_SVM_SUSPENDED);
+ goto out;
+ }
+
+ ok = 1;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+
+/* ===================== colo: send tailbuf ========================== */
+void libxl__colo_save_domain_checkpoint_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_save_state *dss = CONTAINER_OF(shs, *dss, shs);
+
+ /* Convenience aliases */
+ libxl__colo_save_state *const css = &dss->css;
+
+ /* write toolstack and emulator context, checkpoint end */
+ css->callback = NULL;
+ dss->sws.write_records_callback = colo_common_write_stream_done;
+ libxl__stream_write_start_checkpoint(shs->egc, &dss->sws);
+}
+
+/* ===================== colo: resume primary vm ===================== */
+/*
+ * Do the following things when resuming primary vm:
+ * 1. read LIBXL_COLO_SVM_READY
+ * 2. do preresume
+ * 3. resume primary vm
+ * 4. read LIBXL_COLO_SVM_RESUMED
+ */
+static void colo_preresume_dm_saved(libxl__egc *egc,
+ libxl__domain_save_state *dss, int rc);
+static void colo_read_svm_ready_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id);
+static void colo_preresume_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_read_svm_resumed_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id);
+
+void libxl__colo_save_domain_resume_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__egc *egc = shs->egc;
+ libxl__domain_save_state *dss = CONTAINER_OF(shs, *dss, shs);
+
+ /* This would go into tailbuf. */
+ if (dss->hvm) {
+ libxl__domain_save_device_model(egc, dss, colo_preresume_dm_saved);
+ } else {
+ colo_preresume_dm_saved(egc, dss, 0);
+ }
+
+ return;
+}
+
+static void colo_preresume_dm_saved(libxl__egc *egc,
+ libxl__domain_save_state *dss, int rc)
+{
+ /* Convenience aliases */
+ libxl__colo_save_state *const css = &dss->css;
+
+ STATE_AO_GC(css->cds.ao);
+
+ if (rc) {
+ LOG(ERROR, "Failed to save device model. Terminating COLO..");
+ goto out;
+ }
+
+ /* read COLO_SVM_READY */
+ css->callback = colo_read_svm_ready_done;
+ css->srs.read_records_callback = colo_common_read_stream_done;
+ libxl__stream_read_colo_context(egc, &css->srs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void colo_read_svm_ready_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id)
+{
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(css->cds.ao);
+
+ if (id != COLO_SVM_READY) {
+ LOG(ERROR, "invalid section: %d, expected: %d", id, COLO_SVM_READY);
+ goto out;
+ }
+
+ css->svm_running = true;
+ css->cds.callback = colo_preresume_cb;
+ libxl__checkpoint_devices_preresume(egc, &css->cds);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void colo_preresume_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(cds->ao);
+
+ if (rc) {
+ LOG(ERROR, "preresume fails");
+ goto out;
+ }
+
+ /* Resumes the domain and the device model */
+ if (libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1)) {
+ LOG(ERROR, "cannot resume primary vm");
+ goto out;
+ }
+
+ /* read COLO_SVM_RESUMED */
+ css->callback = colo_read_svm_resumed_done;
+ css->srs.read_records_callback = colo_common_read_stream_done;
+ libxl__stream_read_colo_context(egc, &css->srs);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void colo_read_svm_resumed_done(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ int id)
+{
+ int ok = 0;
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(css->cds.ao);
+
+ if (id != COLO_SVM_RESUMED) {
+ LOG(ERROR, "invalid section: %d, expected: %d", id, COLO_SVM_RESUMED);
+ goto out;
+ }
+
+ ok = 1;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+
+/* ===================== colo: wait new checkpoint ===================== */
+/*
+ * Do the following things:
+ * 1. do commit
+ * 2. wait for a new checkpoint
+ * 3. write LIBXL_COLO_NEW_CHECKPOINT
+ */
+static void colo_device_commit_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_start_new_checkpoint(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+
+void libxl__colo_save_domain_should_checkpoint_callback(void *data)
+{
+ libxl__save_helper_state *shs = data;
+ libxl__domain_save_state *dss = CONTAINER_OF(shs, *dss, shs);
+ libxl__egc *egc = dss->shs.egc;
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = &dss->css.cds;
+
+ cds->callback = colo_device_commit_cb;
+ libxl__checkpoint_devices_commit(egc, cds);
+}
+
+static void colo_device_commit_cb(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+
+ STATE_AO_GC(cds->ao);
+
+ if (rc) {
+ LOG(ERROR, "commit fails");
+ goto out;
+ }
+
+ /* TODO: wait a new checkpoint */
+ colo_start_new_checkpoint(egc, cds, 0);
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void colo_start_new_checkpoint(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+ libxl_sr_colo_context colo_context = { .id = COLO_NEW_CHECKPOINT };
+
+ if (rc)
+ goto out;
+
+ /* write COLO_NEW_CHECKPOINT */
+ css->callback = NULL;
+ dss->sws.write_records_callback = colo_common_write_stream_done;
+ libxl__stream_write_colo_context(egc, &dss->sws, &colo_context);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+
+/* ===================== colo: common callback ===================== */
+static void colo_common_write_stream_done(libxl__egc *egc,
+ libxl__stream_write_state *stream,
+ int rc)
+{
+ libxl__domain_save_state *dss = CONTAINER_OF(stream, *dss, sws);
+ int ok;
+
+ /* Convenience aliases */
+ libxl__colo_save_state *const css = &dss->css;
+
+ STATE_AO_GC(stream->ao);
+
+ if (rc < 0) {
+ /* TODO: it may be a internal error, but we don't know */
+ LOG(ERROR, "sending data fails");
+ ok = 2;
+ goto out;
+ }
+
+ if (!css->callback) {
+ /* Everythins is OK */
+ ok = 1;
+ goto out;
+ }
+
+ css->callback(egc, css, 0);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+static void colo_common_read_stream_done(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(stream, *css, srs);
+ libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
+ int ok;
+
+ STATE_AO_GC(stream->ao);
+
+ if (rc < 0) {
+ /* TODO: it may be a internal error, but we don't know */
+ LOG(ERROR, "sending data fails");
+ ok = 2;
+ goto out;
+ }
+
+ if (!css->callback) {
+ /* Everythins is OK */
+ ok = 1;
+ goto out;
+ }
+
+ /* rc contains the id */
+ css->callback(egc, css, rc);
+
+ return;
+
+out:
+ libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
diff --git a/tools/libxl/libxl_dom_save.c b/tools/libxl/libxl_dom_save.c
index 9a3d009..26839cb 100644
--- a/tools/libxl/libxl_dom_save.c
+++ b/tools/libxl/libxl_dom_save.c
@@ -16,6 +16,7 @@
#include "libxl_osdeps.h" /* must come before any other headers */
#include "libxl_internal.h"
+#include "libxl_colo.h"
struct libxl__physmap_info {
uint64_t phys_offset;
@@ -437,6 +438,11 @@ void libxl__domain_save(libxl__egc *egc, libxl__domain_save_state *dss)
callbacks->suspend = libxl__remus_domain_suspend_callback;
callbacks->postcopy = libxl__remus_domain_resume_callback;
callbacks->checkpoint = libxl__remus_domain_save_checkpoint_callback;
+ } else if (dss->checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ callbacks->suspend = libxl__colo_save_domain_suspend_callback;
+ callbacks->postcopy = libxl__colo_save_domain_resume_callback;
+ callbacks->checkpoint = libxl__colo_save_domain_checkpoint_callback;
+ callbacks->should_checkpoint = libxl__colo_save_domain_should_checkpoint_callback;
} else
callbacks->suspend = libxl__domain_suspend_callback;
@@ -575,12 +581,15 @@ static void domain_save_done(libxl__egc *egc,
}
/*
- * With Remus, if we reach this point, it means either
+ * With Remus/COLO, if we reach this point, it means either
* backup died or some network error occurred preventing us
* from sending checkpoints. Teardown the network buffers and
* release netlink resources. This is an async op.
*/
- libxl__remus_teardown(egc, &dss->rs, rc);
+ if (libxl_defbool_val(dss->remus->colo))
+ libxl__colo_save_teardown(egc, &dss->css, rc);
+ else
+ libxl__remus_teardown(egc, &dss->rs, rc);
}
/*========================= Domain restore ============================*/
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 0aafd59..bb5e298 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2655,7 +2655,7 @@ typedef struct libxl__save_helper_state {
/*
* The abstract checkpoint device layer exposes a common
* set of API to [external] libxl for manipulating devices attached to
- * a guest protected by Remus. The device layer also exposes a set of
+ * a guest protected by Remus/COLO. The device layer also exposes a set of
* [internal] interfaces that every device type must implement.
*
* The following API are exposed to libxl:
@@ -2673,7 +2673,7 @@ typedef struct libxl__save_helper_state {
* +libxl__checkpoint_devices_commit
*
* Each device type needs to implement the interfaces specified in
- * the libxl__checkpoint_device_instance_ops if it wishes to support Remus.
+ * the libxl__checkpoint_device_instance_ops if it wishes to support Remus/COLO.
*
* The high-level control flow through the checkpoint device layer is shown
* below:
@@ -2693,7 +2693,7 @@ typedef struct libxl__checkpoint_device_instance_ops libxl__checkpoint_device_in
/*
* Interfaces to be implemented by every device subkind that wishes to
- * support Remus. Functions must be implemented unless otherwise
+ * support Remus/COLO. Functions must be implemented unless otherwise
* stated. Many of these functions are asynchronous. They call
* dev->aodev.callback when done. The actual implementations may be
* synchronous and call dev->aodev.callback directly (as the last
@@ -2873,6 +2873,66 @@ static inline bool libxl__convert_legacy_stream_inuse(
return libxl__ev_child_inuse(&chs->child);
}
+/* State for manipulating a libxl migration v2 stream */
+typedef struct libxl__stream_read_state libxl__stream_read_state;
+
+struct libxl__stream_read_state {
+ /* filled by the user */
+ libxl__ao *ao;
+ int fd;
+ bool legacy;
+ bool back_channel;
+ void (*completion_callback)(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc);
+ void (*read_records_callback)(libxl__egc *egc,
+ libxl__stream_read_state *stream,
+ int rc);
+ /* Private */
+ libxl__carefd *v2_carefd;
+ int rc;
+ int joined_rc;
+ bool running;
+ bool in_checkpoint;
+ bool in_colo_context;
+ libxl__datacopier_state dc;
+ size_t expected_len;
+ libxl_sr_hdr hdr;
+ libxl_sr_rec_hdr rec_hdr;
+ void *rec_body;
+};
+
+_hidden void libxl__stream_read_start(libxl__egc *egc,
+ libxl__stream_read_state *stream);
+
+_hidden void libxl__stream_read_continue(libxl__egc *egc,
+ libxl__stream_read_state *stream);
+_hidden void libxl__stream_read_start_checkpoint(
+ libxl__egc *egc, libxl__stream_read_state *stream);
+_hidden void libxl__stream_read_colo_context(
+ libxl__egc *egc, libxl__stream_read_state *stream);
+
+_hidden void libxl__stream_read_abort(libxl__egc *egc,
+ libxl__stream_read_state *stream, int rc);
+
+static inline bool libxl__stream_read_inuse(
+ const libxl__stream_read_state *stream)
+{
+ return stream->running;
+}
+
+/*----- colo related state structure -----*/
+typedef struct libxl__colo_save_state libxl__colo_save_state;
+struct libxl__colo_save_state {
+ libxl__checkpoint_devices_state cds;
+ int send_fd;
+ int recv_fd;
+
+ /* private */
+ libxl__stream_read_state srs;
+ void (*callback)(libxl__egc *, libxl__colo_save_state *, int);
+ bool svm_running;
+};
/*----- Domain suspend (save) state structure -----*/
@@ -2978,7 +3038,12 @@ struct libxl__domain_save_state {
libxl__domain_suspend_state dsps;
int hvm;
int xcflags;
- libxl__remus_state rs;
+ union {
+ /* for Remus */
+ libxl__remus_state rs;
+ /* for COLO */
+ libxl__colo_save_state css;
+ };
libxl__save_helper_state shs;
libxl__logdirty_switch logdirty;
/* private for libxl__domain_save_device_model */
@@ -3232,54 +3297,6 @@ typedef void libxl__domain_create_cb(libxl__egc *egc,
libxl__domain_create_state*,
int rc, uint32_t domid);
-/* State for manipulating a libxl migration v2 stream */
-typedef struct libxl__stream_read_state libxl__stream_read_state;
-
-struct libxl__stream_read_state {
- /* filled by the user */
- libxl__ao *ao;
- int fd;
- bool legacy;
- bool back_channel;
- void (*completion_callback)(libxl__egc *egc,
- libxl__stream_read_state *stream,
- int rc);
- void (*read_records_callback)(libxl__egc *egc,
- libxl__stream_read_state *stream,
- int rc);
- /* Private */
- libxl__carefd *v2_carefd;
- int rc;
- int joined_rc;
- bool running;
- bool in_checkpoint;
- bool in_colo_context;
- libxl__datacopier_state dc;
- size_t expected_len;
- libxl_sr_hdr hdr;
- libxl_sr_rec_hdr rec_hdr;
- void *rec_body;
-};
-
-_hidden void libxl__stream_read_start(libxl__egc *egc,
- libxl__stream_read_state *stream);
-
-_hidden void libxl__stream_read_continue(libxl__egc *egc,
- libxl__stream_read_state *stream);
-_hidden void libxl__stream_read_start_checkpoint(
- libxl__egc *egc, libxl__stream_read_state *stream);
-_hidden void libxl__stream_read_colo_context(
- libxl__egc *egc, libxl__stream_read_state *stream);
-
-_hidden void libxl__stream_read_abort(libxl__egc *egc,
- libxl__stream_read_state *stream, int rc);
-
-static inline bool libxl__stream_read_inuse(
- const libxl__stream_read_state *stream)
-{
- return stream->running;
-}
-
/* colo related structure */
typedef struct libxl__colo_restore_state libxl__colo_restore_state;
typedef void libxl__colo_callback(libxl__egc *,
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index e05d12b..cf1eeb2 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -696,6 +696,7 @@ libxl_domain_remus_info = Struct("domain_remus_info",[
("netbuf", libxl_defbool),
("netbufscript", string),
("diskbuf", libxl_defbool),
+ ("colo", libxl_defbool)
])
libxl_event_type = Enumeration("event_type", [
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 06/18] libxc/restore: support COLO restore
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (4 preceding siblings ...)
2015-06-25 6:30 ` [PATCH v7 COLO 05/18] primary " Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo Yang Hongyang
` (12 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
call the callbacks resume/checkpoint/suspend while secondary vm
status is consistent with primary.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
---
tools/libxc/xc_sr_common.h | 19 ++++++++++++--
tools/libxc/xc_sr_restore.c | 63 +++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+), 2 deletions(-)
diff --git a/tools/libxc/xc_sr_common.h b/tools/libxc/xc_sr_common.h
index 88ef135..229ba0a 100644
--- a/tools/libxc/xc_sr_common.h
+++ b/tools/libxc/xc_sr_common.h
@@ -132,8 +132,11 @@ struct xc_sr_restore_ops
*
* @return 0 for success, -1 for failure, or the sentinel value
* RECORD_NOT_PROCESSED.
+ * BROKEN_CHANNEL: if we are under Remus/COLO, this means that the master
+ * may dead, we will failover.
*/
#define RECORD_NOT_PROCESSED 1
+#define BROKEN_CHANNEL 2
int (*process_record)(struct xc_sr_context *ctx, struct xc_sr_record *rec);
/**
@@ -164,6 +167,18 @@ struct xc_sr_context
xc_dominfo_t dominfo;
+ /*
+ * migration stream
+ * 0: Plain VM
+ * 1: Remus
+ * 2: COLO
+ */
+ enum {
+ MIG_STREAM_PLAIN,
+ MIG_STREAM_REMUS,
+ MIG_STREAM_COLO,
+ } migration_stream;
+
union /* Common save or restore data. */
{
struct /* Save data. */
@@ -206,13 +221,13 @@ struct xc_sr_context
uint32_t guest_page_size;
/* Plain VM, or checkpoints over time. */
- bool checkpointed;
+ int checkpointed;
/* Currently buffering records between a checkpoint */
bool buffer_all_records;
/*
- * With Remus, we buffer the records sent by the primary at checkpoint,
+ * With Remus/COLO, we buffer the records sent by the primary at checkpoint,
* in case the primary will fail, we can recover from the last
* checkpoint state.
* This should be enough for most of the cases because primary only send
diff --git a/tools/libxc/xc_sr_restore.c b/tools/libxc/xc_sr_restore.c
index e6f00db..2ce207c 100644
--- a/tools/libxc/xc_sr_restore.c
+++ b/tools/libxc/xc_sr_restore.c
@@ -1,4 +1,5 @@
#include <arpa/inet.h>
+#include <assert.h>
#include <assert.h>
@@ -446,6 +447,49 @@ static int handle_checkpoint(struct xc_sr_context *ctx)
else
ctx->restore.buffer_all_records = true;
+ if ( ctx->restore.checkpointed == MIG_STREAM_COLO )
+ {
+#define HANDLE_CALLBACK_RETURN_VALUE(ret) \
+ do { \
+ if ( ret == 1 ) \
+ rc = 0; /* Success */ \
+ else \
+ { \
+ if ( ret == 2 ) \
+ rc = BROKEN_CHANNEL; \
+ else \
+ rc = -1; /* Some unspecified error */ \
+ goto err; \
+ } \
+ } while (0)
+
+ /* COLO */
+
+ /* We need to resume guest */
+ rc = ctx->restore.ops.stream_complete(ctx);
+ if ( rc )
+ goto err;
+
+ /* TODO: call restore_results */
+
+ /* Resume secondary vm */
+ ret = ctx->restore.callbacks->postcopy(ctx->restore.callbacks->data);
+ HANDLE_CALLBACK_RETURN_VALUE(ret);
+
+ /* Wait for a new checkpoint */
+ ret = ctx->restore.callbacks->should_checkpoint(
+ ctx->restore.callbacks->data);
+ HANDLE_CALLBACK_RETURN_VALUE(ret);
+
+ /* suspend secondary vm */
+ ret = ctx->restore.callbacks->suspend(ctx->restore.callbacks->data);
+ HANDLE_CALLBACK_RETURN_VALUE(ret);
+
+#undef HANDLE_CALLBACK_RETURN_VALUE
+
+ /* TODO: send dirty bitmap to primary */
+ }
+
err:
return rc;
}
@@ -608,6 +652,8 @@ static int restore(struct xc_sr_context *ctx)
goto err;
}
}
+ else if ( rc == BROKEN_CHANNEL )
+ goto remus_failover;
else if ( rc )
goto err;
}
@@ -615,6 +661,15 @@ static int restore(struct xc_sr_context *ctx)
} while ( rec.type != REC_TYPE_END );
remus_failover:
+
+ if ( ctx->restore.checkpointed == MIG_STREAM_COLO )
+ {
+ /* With COLO, we have already called stream_complete */
+ rc = 0;
+ IPRINTF("COLO Failover");
+ goto done;
+ }
+
/*
* With Remus, if we reach here, there must be some error on primary,
* failover from the last checkpoint state.
@@ -669,6 +724,14 @@ int xc_domain_restore2(xc_interface *xch, int io_fd, uint32_t dom,
if (checkpointed_stream)
assert(callbacks->checkpoint);
+ if ( ctx.restore.checkpointed == MIG_STREAM_COLO )
+ {
+ /* this is COLO restore */
+ assert(callbacks->suspend &&
+ callbacks->postcopy &&
+ callbacks->should_checkpoint);
+ }
+
IPRINTF("In experimental %s", __func__);
DPRINTF("fd %d, dom %u, hvm %u, pae %u, superpages %d"
", checkpointed_stream %d", io_fd, dom, hvm, pae,
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (5 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 06/18] libxc/restore: support COLO restore Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm Yang Hongyang
` (11 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
Send dirty bitmap to primary when checkpoint under colo.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxc/xc_sr_common.h | 4 ++
tools/libxc/xc_sr_restore.c | 120 +++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 123 insertions(+), 1 deletion(-)
diff --git a/tools/libxc/xc_sr_common.h b/tools/libxc/xc_sr_common.h
index 229ba0a..01ee2e7 100644
--- a/tools/libxc/xc_sr_common.h
+++ b/tools/libxc/xc_sr_common.h
@@ -213,6 +213,10 @@ struct xc_sr_context
struct xc_sr_restore_ops ops;
struct restore_callbacks *callbacks;
+ int send_fd;
+ unsigned long p2m_size;
+ xc_hypercall_buffer_t dirty_bitmap_hbuf;
+
/* From Image Header. */
uint32_t format_version;
diff --git a/tools/libxc/xc_sr_restore.c b/tools/libxc/xc_sr_restore.c
index 2ce207c..5f98927 100644
--- a/tools/libxc/xc_sr_restore.c
+++ b/tools/libxc/xc_sr_restore.c
@@ -410,6 +410,92 @@ static int handle_page_data(struct xc_sr_context *ctx, struct xc_sr_record *rec)
return rc;
}
+/*
+ * Send dirty_bitmap to primary.
+ */
+static int send_dirty_bitmap(struct xc_sr_context *ctx)
+{
+ xc_interface *xch = ctx->xch;
+ int rc = -1;
+ unsigned count, written;
+ uint64_t i, *pfns = NULL;
+ struct iovec *iov = NULL;
+ xc_shadow_op_stats_t stats = { 0, ctx->save.p2m_size };
+ struct xc_sr_record rec =
+ {
+ .type = REC_TYPE_DIRTY_BITMAP,
+ };
+ DECLARE_HYPERCALL_BUFFER_SHADOW(unsigned long, dirty_bitmap,
+ &ctx->save.dirty_bitmap_hbuf);
+
+ if ( xc_shadow_control(
+ xch, ctx->domid, XEN_DOMCTL_SHADOW_OP_CLEAN,
+ HYPERCALL_BUFFER(dirty_bitmap), ctx->restore.p2m_size,
+ NULL, 0, &stats) != ctx->restore.p2m_size )
+ {
+ PERROR("Failed to retrieve logdirty bitmap");
+ goto err;
+ }
+
+ for ( i = 0, count = 0; i < ctx->restore.p2m_size; i++ )
+ {
+ if ( test_bit(i, dirty_bitmap) )
+ count++;
+ }
+
+
+ pfns = malloc(count * sizeof(*pfns));
+ if ( !pfns )
+ {
+ ERROR("Unable to allocate %zu bytes of memory for dirty pfn list",
+ count * sizeof(*pfns));
+ goto err;
+ }
+
+ for ( i = 0, written = 0; i < ctx->restore.p2m_size; ++i )
+ {
+ if ( !test_bit(i, dirty_bitmap) )
+ continue;
+
+ if ( written > count )
+ {
+ ERROR("Dirty pfn list exceed");
+ goto err;
+ }
+
+ pfns[written++] = i;
+ }
+
+ /* iovec[] for writev(). */
+ iov = malloc(3 * sizeof(*iov));
+ if ( !iov )
+ {
+ ERROR("Unable to allocate memory for sending dirty bitmap");
+ goto err;
+ }
+
+ rec.length = count * sizeof(*pfns);
+
+ iov[0].iov_base = &rec.type;
+ iov[0].iov_len = sizeof(rec.type);
+
+ iov[1].iov_base = &rec.length;
+ iov[1].iov_len = sizeof(rec.length);
+
+ iov[2].iov_base = pfns;
+ iov[2].iov_len = count * sizeof(*pfns);
+
+ if ( writev_exact(ctx->restore.send_fd, iov, 3) )
+ {
+ PERROR("Failed to write dirty bitmap to stream");
+ goto err;
+ }
+
+ rc = 0;
+ err:
+ return rc;
+}
+
static int process_record(struct xc_sr_context *ctx, struct xc_sr_record *rec);
static int handle_checkpoint(struct xc_sr_context *ctx)
{
@@ -487,7 +573,9 @@ static int handle_checkpoint(struct xc_sr_context *ctx)
#undef HANDLE_CALLBACK_RETURN_VALUE
- /* TODO: send dirty bitmap to primary */
+ rc = send_dirty_bitmap(ctx);
+ if ( rc )
+ goto err;
}
err:
@@ -559,6 +647,21 @@ static int setup(struct xc_sr_context *ctx)
{
xc_interface *xch = ctx->xch;
int rc;
+ DECLARE_HYPERCALL_BUFFER_SHADOW(unsigned long, dirty_bitmap,
+ &ctx->restore.dirty_bitmap_hbuf);
+
+ if ( ctx->restore.checkpointed == MIG_STREAM_COLO )
+ {
+ dirty_bitmap = xc_hypercall_buffer_alloc_pages(xch, dirty_bitmap,
+ NRPAGES(bitmap_size(ctx->restore.p2m_size)));
+
+ if ( !dirty_bitmap )
+ {
+ ERROR("Unable to allocate memory for dirty bitmap");
+ rc = -1;
+ goto err;
+ }
+ }
rc = ctx->restore.ops.setup(ctx);
if ( rc )
@@ -592,10 +695,15 @@ static void cleanup(struct xc_sr_context *ctx)
{
xc_interface *xch = ctx->xch;
unsigned i;
+ DECLARE_HYPERCALL_BUFFER_SHADOW(unsigned long, dirty_bitmap,
+ &ctx->save.dirty_bitmap_hbuf);
for ( i = 0; i < ctx->restore.buffered_rec_num; i++ )
free(ctx->restore.buffered_records[i].data);
+ if ( ctx->restore.checkpointed == MIG_STREAM_COLO )
+ xc_hypercall_buffer_free_pages(xch, dirty_bitmap,
+ NRPAGES(bitmap_size(ctx->save.p2m_size)));
free(ctx->restore.buffered_records);
free(ctx->restore.populated_pfns);
if ( ctx->restore.ops.cleanup(ctx) )
@@ -706,6 +814,7 @@ int xc_domain_restore2(xc_interface *xch, int io_fd, uint32_t dom,
int checkpointed_stream,
struct restore_callbacks *callbacks, int back_fd)
{
+ xen_pfn_t nr_pfns;
struct xc_sr_context ctx =
{
.xch = xch,
@@ -719,6 +828,7 @@ int xc_domain_restore2(xc_interface *xch, int io_fd, uint32_t dom,
ctx.restore.xenstore_domid = store_domid;
ctx.restore.checkpointed = checkpointed_stream;
ctx.restore.callbacks = callbacks;
+ ctx.restore.send_fd = back_fd;
/* Sanity checks for callbacks. */
if (checkpointed_stream)
@@ -754,6 +864,14 @@ int xc_domain_restore2(xc_interface *xch, int io_fd, uint32_t dom,
if ( read_headers(&ctx) )
return -1;
+ if ( xc_domain_nr_gpfns(xch, dom, &nr_pfns) < 0 )
+ {
+ PERROR("Unable to obtain the guest p2m size");
+ return -1;
+ }
+
+ ctx.restore.p2m_size = nr_pfns;
+
if ( ctx.dominfo.hvm )
{
ctx.restore.ops = restore_ops_x86_hvm;
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (6 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 09/18] libxc/save: support COLO save Yang Hongyang
` (10 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
We will call libxl__xc_domain_restore_done() to rebuild secondary vm. But
we need store mfn and console mfn when rebuilding secondary vm. So make
restore_results a function pointer in callback struct and struct
{save,restore}_callbacks, and use this callback to send store mfn and
console mfn to xl.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
---
tools/libxc/include/xenguest.h | 8 ++++++++
tools/libxc/xc_sr_restore.c | 7 +++++--
tools/libxl/libxl_colo_restore.c | 5 -----
tools/libxl/libxl_create.c | 2 ++
tools/libxl/libxl_save_msgs_gen.pl | 2 +-
5 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/tools/libxc/include/xenguest.h b/tools/libxc/include/xenguest.h
index dcc441a..b2a9818 100644
--- a/tools/libxc/include/xenguest.h
+++ b/tools/libxc/include/xenguest.h
@@ -136,6 +136,14 @@ struct restore_callbacks {
*/
int (*should_checkpoint)(void* data);
+ /*
+ * callback to send store mfn and console mfn to xl
+ * if we want to resume vm before xc_domain_save()
+ * exits.
+ */
+ void (*restore_results)(unsigned long store_mfn, unsigned long console_mfn,
+ void *data);
+
/* to be provided as the last argument to each callback function */
void* data;
};
diff --git a/tools/libxc/xc_sr_restore.c b/tools/libxc/xc_sr_restore.c
index 5f98927..0247e84 100644
--- a/tools/libxc/xc_sr_restore.c
+++ b/tools/libxc/xc_sr_restore.c
@@ -556,7 +556,9 @@ static int handle_checkpoint(struct xc_sr_context *ctx)
if ( rc )
goto err;
- /* TODO: call restore_results */
+ ctx->restore.callbacks->restore_results(ctx->restore.xenstore_gfn,
+ ctx->restore.console_gfn,
+ ctx->restore.callbacks->data);
/* Resume secondary vm */
ret = ctx->restore.callbacks->postcopy(ctx->restore.callbacks->data);
@@ -839,7 +841,8 @@ int xc_domain_restore2(xc_interface *xch, int io_fd, uint32_t dom,
/* this is COLO restore */
assert(callbacks->suspend &&
callbacks->postcopy &&
- callbacks->should_checkpoint);
+ callbacks->should_checkpoint &&
+ callbacks->restore_results);
}
IPRINTF("In experimental %s", __func__);
diff --git a/tools/libxl/libxl_colo_restore.c b/tools/libxl/libxl_colo_restore.c
index 40fd170..ada9a35 100644
--- a/tools/libxl/libxl_colo_restore.c
+++ b/tools/libxl/libxl_colo_restore.c
@@ -137,11 +137,6 @@ static void colo_resume_vm(libxl__egc *egc,
return;
}
- /*
- * TODO: get store mfn and console mfn
- * We should call the callback restore_results in
- * xc_domain_restore() before resuming the guest.
- */
libxl__xc_domain_restore_done(egc, dcs, 0, 0, 0);
return;
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 2380368..aaa14e3 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1148,6 +1148,8 @@ static void domcreate_bootloader_done(libxl__egc *egc,
dcs->srs.completion_callback = domcreate_stream_done;
/* colo restore setup */
+ callbacks->restore_results = libxl__srm_callout_callback_restore_results;
+
if (checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
crs->ao = ao;
crs->domid = domid;
diff --git a/tools/libxl/libxl_save_msgs_gen.pl b/tools/libxl/libxl_save_msgs_gen.pl
index 86cd395..e96673e 100755
--- a/tools/libxl/libxl_save_msgs_gen.pl
+++ b/tools/libxl/libxl_save_msgs_gen.pl
@@ -29,7 +29,7 @@ our @msgs = (
[ 6, 'srcxA', "should_checkpoint", [] ],
[ 7, 'scxA', "switch_qemu_logdirty", [qw(int domid
unsigned enable)] ],
- [ 8, 'r', "restore_results", ['unsigned long', 'store_mfn',
+ [ 8, 'rcx', "restore_results", ['unsigned long', 'store_mfn',
'unsigned long', 'console_mfn'] ],
[ 9, 'srW', "complete", [qw(int retval
int errnoval)] ],
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 09/18] libxc/save: support COLO save
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (7 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 10/18] implement the cmdline for COLO Yang Hongyang
` (9 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
After suspend primary vm, get dirty bitmap on secondary vm,
and send pages both dirty on primary/secondary to secondary.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
---
tools/libxc/xc_sr_common.h | 2 +
tools/libxc/xc_sr_save.c | 104 +++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 102 insertions(+), 4 deletions(-)
diff --git a/tools/libxc/xc_sr_common.h b/tools/libxc/xc_sr_common.h
index 01ee2e7..92d8da0 100644
--- a/tools/libxc/xc_sr_common.h
+++ b/tools/libxc/xc_sr_common.h
@@ -183,6 +183,8 @@ struct xc_sr_context
{
struct /* Save data. */
{
+ int recv_fd;
+
struct xc_sr_save_ops ops;
struct save_callbacks *callbacks;
diff --git a/tools/libxc/xc_sr_save.c b/tools/libxc/xc_sr_save.c
index d12e5b1..6f13706 100644
--- a/tools/libxc/xc_sr_save.c
+++ b/tools/libxc/xc_sr_save.c
@@ -515,6 +515,58 @@ static int send_memory_live(struct xc_sr_context *ctx)
return rc;
}
+static int merge_secondary_dirty_bitmap(struct xc_sr_context *ctx)
+{
+ xc_interface *xch = ctx->xch;
+ struct xc_sr_record rec;
+ uint64_t *pfns = NULL;
+ uint64_t pfn;
+ unsigned count, i;
+ int rc;
+ DECLARE_HYPERCALL_BUFFER_SHADOW(unsigned long, dirty_bitmap,
+ &ctx->save.dirty_bitmap_hbuf);
+
+ rc = read_record(ctx, ctx->save.recv_fd, &rec);
+ if ( rc )
+ goto err;
+
+ if ( rec.type != REC_TYPE_DIRTY_BITMAP )
+ {
+ PERROR("Expect dirty bitmap record, but received %u", rec.type );
+ rc = -1;
+ goto err;
+ }
+
+ if ( rec.length % sizeof(*pfns) )
+ {
+ PERROR("Invalid dirty bitmap record length %u", rec.length );
+ rc = -1;
+ goto err;
+ }
+
+ count = rec.length / sizeof(*pfns);
+ pfns = rec.data;
+
+ for ( i = 0; i < count; i++ )
+ {
+ pfn = pfns[i];
+ if (pfn > ctx->save.p2m_size)
+ {
+ PERROR("Invalid pfn %#lx", pfn );
+ rc = -1;
+ goto err;
+ }
+
+ set_bit(pfn, dirty_bitmap);
+ }
+
+ rc = 0;
+
+ err:
+ free(rec.data);
+ return rc;
+}
+
/*
* Suspend the domain and send dirty memory.
* This is the last iteration of the live migration and the
@@ -555,6 +607,16 @@ static int suspend_and_send_dirty(struct xc_sr_context *ctx)
bitmap_or(dirty_bitmap, ctx->save.deferred_pages, ctx->save.p2m_size);
+ if ( !ctx->save.live && ctx->save.checkpointed == MIG_STREAM_COLO )
+ {
+ rc = merge_secondary_dirty_bitmap(ctx);
+ if ( rc )
+ {
+ PERROR("Failed to get secondary vm's dirty pages");
+ goto out;
+ }
+ }
+
rc = send_dirty_pages(ctx, stats.dirty_count + ctx->save.nr_deferred_pages);
if ( rc )
goto out;
@@ -784,11 +846,42 @@ static int save(struct xc_sr_context *ctx, uint16_t guest_type)
if ( rc )
goto err;
- ctx->save.callbacks->postcopy(ctx->save.callbacks->data);
+ if ( ctx->save.checkpointed == MIG_STREAM_COLO )
+ {
+ rc = ctx->save.callbacks->checkpoint(ctx->save.callbacks->data);
+ if ( !rc )
+ {
+ rc = -1;
+ goto err;
+ }
+ }
- rc = ctx->save.callbacks->checkpoint(ctx->save.callbacks->data);
- if ( rc <= 0 )
- ctx->save.checkpointed = false;
+ rc = ctx->save.callbacks->postcopy(ctx->save.callbacks->data);
+ if ( !rc )
+ {
+ rc = -1;
+ goto err;
+ }
+
+ if ( ctx->save.checkpointed == MIG_STREAM_COLO )
+ {
+ rc = ctx->save.callbacks->should_checkpoint(
+ ctx->save.callbacks->data);
+ if ( rc <= 0 )
+ ctx->save.checkpointed = false;
+ }
+ else if ( ctx->save.checkpointed == MIG_STREAM_REMUS )
+ {
+ rc = ctx->save.callbacks->checkpoint(ctx->save.callbacks->data);
+ if ( rc <= 0 )
+ ctx->save.checkpointed = false;
+ }
+ else
+ {
+ ERROR("Unknown checkpointed stream");
+ rc = -1;
+ goto err;
+ }
}
} while ( ctx->save.checkpointed );
@@ -835,6 +928,7 @@ int xc_domain_save2(xc_interface *xch, int io_fd, uint32_t dom,
ctx.save.live = !!(flags & XCFLAGS_LIVE);
ctx.save.debug = !!(flags & XCFLAGS_DEBUG);
ctx.save.checkpointed = checkpointed_stream;
+ ctx.save.recv_fd = back_fd;
/*
* TODO: Find some time to better tweak the live migration algorithm.
@@ -850,6 +944,8 @@ int xc_domain_save2(xc_interface *xch, int io_fd, uint32_t dom,
assert(callbacks->switch_qemu_logdirty);
if ( ctx.save.checkpointed )
assert(callbacks->checkpoint && callbacks->postcopy);
+ if ( ctx.save.checkpointed == MIG_STREAM_COLO )
+ assert(callbacks->should_checkpoint);
IPRINTF("In experimental %s", __func__);
DPRINTF("fd %d, dom %u, max_iters %u, max_factor %u, flags %u, hvm %d",
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 10/18] implement the cmdline for COLO
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (8 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 09/18] libxc/save: support COLO save Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 11/18] Support colo mode for qemu disk Yang Hongyang
` (8 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Add a new option -c to the command 'xl remus'. If you want
to use COLO HA instead of Remus HA, please use -c option.
Update man pages to reflect the addition of a new option to
'xl remus' command.
Also add a new option -c to the internal command 'xl migrate-receive'.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
docs/man/xl.pod.1 | 12 ++++++++--
tools/libxl/libxl.c | 23 ++++++++++++++++--
tools/libxl/xl_cmdimpl.c | 61 ++++++++++++++++++++++++++++++++++++-----------
tools/libxl/xl_cmdtable.c | 4 +++-
4 files changed, 81 insertions(+), 19 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 4eb929d..4260c60 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -447,12 +447,15 @@ Print huge (!) amount of debug during the migration process.
=item B<remus> [I<OPTIONS>] I<domain-id> I<host>
-Enable Remus HA for domain. By default B<xl> relies on ssh as a transport
-mechanism between the two hosts.
+Enable Remus HA or COLO HA for domain. By default B<xl> relies on ssh as a
+transport mechanism between the two hosts.
N.B: Remus support in xl is still in experimental (proof-of-concept) phase.
Disk replication support is limited to DRBD disks.
+ COLO support in xl is still in experimental (proof-of-concept) phase.
+ There is no support for network or disk at the moment.
+
B<OPTIONS>
=over 4
@@ -498,6 +501,11 @@ Disable network output buffering. Requires enabling unsafe mode.
Disable disk replication. Requires enabling unsafe mode.
+=item B<-c>
+
+Enable COLO HA. This conflicts with B<-i> and B<-b>, and memory
+checkpoint compression must be disabled.
+
=back
=item B<pause> I<domain-id>
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 8b866f4..08ae7a7 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -811,12 +811,28 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
goto out;
}
+ /* The caller must set this defbool */
+ if (libxl_defbool_is_default(info->colo)) {
+ LOG(ERROR, "colo mode must be enabled/disabled");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
libxl_defbool_setdefault(&info->allow_unsafe, false);
libxl_defbool_setdefault(&info->blackhole, false);
- libxl_defbool_setdefault(&info->compression, true);
+ libxl_defbool_setdefault(&info->compression,
+ !libxl_defbool_val(info->colo));
libxl_defbool_setdefault(&info->netbuf, true);
libxl_defbool_setdefault(&info->diskbuf, true);
+ if (libxl_defbool_val(info->colo)) {
+ if (libxl_defbool_val(info->compression)) {
+ LOG(ERROR, "cannot use memory checkpoint compression in COLO mode");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+ }
+
if (!libxl_defbool_val(info->allow_unsafe) &&
(libxl_defbool_val(info->blackhole) ||
!libxl_defbool_val(info->netbuf) ||
@@ -838,7 +854,10 @@ int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
dss->live = 1;
dss->debug = 0;
dss->remus = info;
- dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_REMUS;
+ if (libxl_defbool_val(info->colo))
+ dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_COLO;
+ else
+ dss->checkpointed_stream = LIBXL_CHECKPOINTED_STREAM_REMUS;
assert(info);
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 83164bc..eb1b45f 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -4259,6 +4259,8 @@ static void migrate_receive(int debug, int daemonize, int monitor,
char rc_buf;
char *migration_domname;
struct domain_create dom_info;
+ const char *ha = checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO ?
+ "COLO" : "Remus";
signal(SIGPIPE, SIG_IGN);
/* if we get SIGPIPE we'd rather just have it as an error */
@@ -4279,6 +4281,9 @@ static void migrate_receive(int debug, int daemonize, int monitor,
dom_info.send_fd = send_fd;
dom_info.migration_domname_r = &migration_domname;
dom_info.checkpointed_stream = checkpointed;
+ if (checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO)
+ /* COLO uses stdout to send control message to master */
+ dom_info.quiet = 1;
rc = create_domain(&dom_info);
if (rc < 0) {
@@ -4293,8 +4298,8 @@ static void migrate_receive(int debug, int daemonize, int monitor,
/* If we are here, it means that the sender (primary) has crashed.
* TODO: Split-Brain Check.
*/
- fprintf(stderr, "migration target: Remus Failover for domain %u\n",
- domid);
+ fprintf(stderr, "migration target: %s Failover for domain %u\n",
+ ha, domid);
/*
* If domain renaming fails, lets just continue (as we need the domain
@@ -4310,16 +4315,20 @@ static void migrate_receive(int debug, int daemonize, int monitor,
rc = libxl_domain_rename(ctx, domid, migration_domname,
common_domname);
if (rc)
- fprintf(stderr, "migration target (Remus): "
+ fprintf(stderr, "migration target (%s): "
"Failed to rename domain from %s to %s:%d\n",
- migration_domname, common_domname, rc);
+ ha, migration_domname, common_domname, rc);
}
+ if (checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO)
+ /* The guest is running after failover in COLO mode */
+ exit(rc ? -ERROR_FAIL: 0);
+
rc = libxl_domain_unpause(ctx, domid);
if (rc)
- fprintf(stderr, "migration target (Remus): "
+ fprintf(stderr, "migration target (%s): "
"Failed to unpause domain %s (id: %u):%d\n",
- common_domname, domid, rc);
+ ha, common_domname, domid, rc);
exit(rc ? -ERROR_FAIL: 0);
}
@@ -4465,7 +4474,7 @@ int main_migrate_receive(int argc, char **argv)
int checkpointed = LIBXL_CHECKPOINTED_STREAM_NONE;
int opt;
- SWITCH_FOREACH_OPT(opt, "Fedr", NULL, "migrate-receive", 0) {
+ SWITCH_FOREACH_OPT(opt, "Fedrc", NULL, "migrate-receive", 0) {
case 'F':
daemonize = 0;
break;
@@ -4479,6 +4488,9 @@ int main_migrate_receive(int argc, char **argv)
case 'r':
checkpointed = LIBXL_CHECKPOINTED_STREAM_REMUS;
break;
+ case 'c':
+ checkpointed = LIBXL_CHECKPOINTED_STREAM_COLO;
+ break;
}
if (argc-optind != 0) {
@@ -7967,11 +7979,8 @@ int main_remus(int argc, char **argv)
int config_len;
memset(&r_info, 0, sizeof(libxl_domain_remus_info));
- /* Defaults */
- r_info.interval = 200;
- libxl_defbool_setdefault(&r_info.blackhole, false);
- SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:e", NULL, "remus", 2) {
+ SWITCH_FOREACH_OPT(opt, "Fbundi:s:N:ec", NULL, "remus", 2) {
case 'i':
r_info.interval = atoi(optarg);
break;
@@ -7999,11 +8008,32 @@ int main_remus(int argc, char **argv)
case 'e':
daemonize = 0;
break;
+ case 'c':
+ libxl_defbool_set(&r_info.colo, true);
}
domid = find_domain(argv[optind]);
host = argv[optind + 1];
+ /* Defaults */
+ libxl_defbool_setdefault(&r_info.blackhole, false);
+ libxl_defbool_setdefault(&r_info.colo, false);
+ if (!libxl_defbool_val(r_info.colo) && !r_info.interval)
+ r_info.interval = 200;
+
+ if (libxl_defbool_val(r_info.colo)) {
+ if (r_info.interval || libxl_defbool_val(r_info.blackhole)) {
+ perror("Option -c conflicts with -i or -b");
+ exit(-1);
+ }
+
+ if (libxl_defbool_is_default(r_info.compression)) {
+ perror("COLO can't be used with memory compression. "
+ "Disable memory checkpoint compression now...");
+ libxl_defbool_set(&r_info.compression, false);
+ }
+ }
+
if (!r_info.netbufscript)
r_info.netbufscript = default_remus_netbufscript;
@@ -8018,8 +8048,9 @@ int main_remus(int argc, char **argv)
if (!ssh_command[0]) {
rune = host;
} else {
- if (asprintf(&rune, "exec %s %s xl migrate-receive -r %s",
+ if (asprintf(&rune, "exec %s %s xl migrate-receive %s %s",
ssh_command, host,
+ libxl_defbool_val(r_info.colo) ? "-c" : "-r",
daemonize ? "" : " -e") < 0)
return 1;
}
@@ -8048,7 +8079,8 @@ int main_remus(int argc, char **argv)
* domain to force failover
*/
if (libxl_domain_info(ctx, 0, domid)) {
- fprintf(stderr, "Remus: Primary domain has been destroyed.\n");
+ fprintf(stderr, "%s: Primary domain has been destroyed.\n",
+ libxl_defbool_val(r_info.colo) ? "COLO" : "Remus");
close(send_fd);
return 0;
}
@@ -8060,7 +8092,8 @@ int main_remus(int argc, char **argv)
if (rc == ERROR_GUEST_TIMEDOUT)
fprintf(stderr, "Failed to suspend domain at primary.\n");
else {
- fprintf(stderr, "Remus: Backup failed? resuming domain at primary.\n");
+ fprintf(stderr, "%s: Backup failed? resuming domain at primary.\n",
+ libxl_defbool_val(r_info.colo) ? "COLO" : "Remus");
libxl_domain_resume(ctx, domid, 1, 0);
}
diff --git a/tools/libxl/xl_cmdtable.c b/tools/libxl/xl_cmdtable.c
index 7f4759b..611accf 100644
--- a/tools/libxl/xl_cmdtable.c
+++ b/tools/libxl/xl_cmdtable.c
@@ -515,7 +515,9 @@ struct cmd_spec cmd_table[] = {
"-b Replicate memory checkpoints to /dev/null (blackhole).\n"
" Works only in unsafe mode.\n"
"-n Disable network output buffering. Works only in unsafe mode.\n"
- "-d Disable disk replication. Works only in unsafe mode."
+ "-d Disable disk replication. Works only in unsafe mode.\n"
+ "-c Enable COLO HA. It is conflict with -i and -b, and memory\n"
+ " checkpoint must be disabled"
},
#endif
{ "devd",
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 11/18] Support colo mode for qemu disk
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (9 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 10/18] implement the cmdline for COLO Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 12/18] COLO: use qemu block replication Yang Hongyang
` (7 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Usage: disk = ['...,colo,colo-params=xxx,active-disk=xxx,hidden-disk=xxx...']
The format of colo-params: host:port:exportname=xx
For QEMU block replication details:
http://wiki.qemu.org/Features/BlockReplication
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
docs/man/xl.pod.1 | 2 +-
docs/misc/xl-disk-configuration.txt | 38 ++++++
tools/libxl/libxl.c | 42 +++++-
tools/libxl/libxl_create.c | 25 +++-
tools/libxl/libxl_device.c | 38 ++++++
tools/libxl/libxl_dm.c | 262 ++++++++++++++++++++++++++++++++++--
tools/libxl/libxl_types.idl | 5 +
tools/libxl/libxlu_disk_l.l | 5 +
8 files changed, 406 insertions(+), 11 deletions(-)
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 4260c60..600facb 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -454,7 +454,7 @@ N.B: Remus support in xl is still in experimental (proof-of-concept) phase.
Disk replication support is limited to DRBD disks.
COLO support in xl is still in experimental (proof-of-concept) phase.
- There is no support for network or disk at the moment.
+ There is no support for network at the moment.
B<OPTIONS>
diff --git a/docs/misc/xl-disk-configuration.txt b/docs/misc/xl-disk-configuration.txt
index 6a2118d..e366e8d 100644
--- a/docs/misc/xl-disk-configuration.txt
+++ b/docs/misc/xl-disk-configuration.txt
@@ -234,6 +234,44 @@ were intentionally created non-sparse to avoid fragmentation of the
file.
+===============
+COLO PARAMETERS
+===============
+
+
+colo
+----
+
+Enable COLO HA for disk. For better understanding block replication on
+QEMU, please refer to:
+http://wiki.qemu.org/Features/BlockReplication
+
+
+colo-params=host:port:exportname=<name>
+---------------------------------------
+
+Description: Secondary host's address and port information,
+ We will run a nbd server on secondary host,
+ exportname is the nbd server's disk export name.
+Mandatory: Yes when COLO enabled
+
+
+active-disk
+-----------
+
+Description: This is used by secondary. Secondary guest's write
+ will be buffered in this disk.
+Mandatory: Yes when COLO enabled
+
+
+hidden-disk
+-----------
+
+Description: This is used by secondary. It buffers the original
+ content that is modified by the primary VM.
+Mandatory: Yes when COLO enabled
+
+
============================================
DEPRECATED PARAMETERS, PREFIXES AND SYNTAXES
============================================
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 08ae7a7..db774e4 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -2241,6 +2241,8 @@ int libxl__device_disk_setdefault(libxl__gc *gc, libxl_device_disk *disk)
int rc;
libxl_defbool_setdefault(&disk->discard_enable, !!disk->readwrite);
+ libxl_defbool_setdefault(&disk->colo_enable, false);
+ libxl_defbool_setdefault(&disk->colo_restore_enable, false);
rc = libxl__resolve_domid(gc, disk->backend_domname, &disk->backend_domid);
if (rc < 0) return rc;
@@ -2441,6 +2443,14 @@ static void device_disk_add(libxl__egc *egc, uint32_t domid,
flexarray_append(back, "params");
flexarray_append(back, libxl__sprintf(gc, "%s:%s",
libxl__device_disk_string_of_format(disk->format), disk->pdev_path));
+ if (libxl_defbool_val(disk->colo_enable)) {
+ flexarray_append(back, "colo-params");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->colo_params));
+ flexarray_append(back, "active-disk");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->active_disk));
+ flexarray_append(back, "hidden-disk");
+ flexarray_append(back, libxl__sprintf(gc, "%s", disk->hidden_disk));
+ }
assert(device->backend_kind == LIBXL__DEVICE_KIND_QDISK);
break;
default:
@@ -2555,7 +2565,10 @@ static int libxl__device_disk_from_xs_be(libxl__gc *gc,
goto cleanup;
}
- /* "params" may not be present; but everything else must be. */
+ /*
+ * "params" and "colo-params" may not be present; but everything
+ * else must be.
+ */
tmp = xs_read(ctx->xsh, XBT_NULL,
libxl__sprintf(gc, "%s/params", be_path), &len);
if (tmp && strchr(tmp, ':')) {
@@ -2565,6 +2578,33 @@ static int libxl__device_disk_from_xs_be(libxl__gc *gc,
disk->pdev_path = tmp;
}
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ libxl__sprintf(gc, "%s/colo-params", be_path), &len);
+ if (tmp) {
+ libxl_defbool_set(&disk->colo_enable, true);
+ disk->colo_params = tmp;
+ } else {
+ libxl_defbool_set(&disk->colo_enable, false);
+ }
+
+ if (libxl_defbool_val(disk->colo_enable)) {
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ libxl__sprintf(gc, "%s/active-disk", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/active-disk", be_path);
+ goto cleanup;
+ }
+ disk->active_disk = tmp;
+
+ tmp = xs_read(ctx->xsh, XBT_NULL,
+ libxl__sprintf(gc, "%s/hidden-disk", be_path), &len);
+ if (!tmp) {
+ LOG(ERROR, "Missing xenstore node %s/hidden-disk", be_path);
+ goto cleanup;
+ }
+ disk->hidden_disk = tmp;
+ }
+
tmp = libxl__xs_read(gc, XBT_NULL,
libxl__sprintf(gc, "%s/type", be_path));
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index aaa14e3..f7bf629 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1711,12 +1711,29 @@ static void domain_create_cb(libxl__egc *egc,
libxl__ao_complete(egc, ao, rc);
}
-
+
+static void set_disk_colo_restore(libxl_domain_config *d_config)
+{
+ int i;
+
+ for (i = 0; i < d_config->num_disks; i++)
+ libxl_defbool_set(&d_config->disks[i].colo_restore_enable, true);
+}
+
+static void unset_disk_colo_restore(libxl_domain_config *d_config)
+{
+ int i;
+
+ for (i = 0; i < d_config->num_disks; i++)
+ libxl_defbool_set(&d_config->disks[i].colo_restore_enable, false);
+}
+
int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
uint32_t *domid,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
+ unset_disk_colo_restore(d_config);
return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
ao_how, aop_console_how);
}
@@ -1727,6 +1744,12 @@ int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
+ if (params->checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ set_disk_colo_restore(d_config);
+ } else {
+ unset_disk_colo_restore(d_config);
+ }
+
return do_domain_create(ctx, d_config, domid, restore_fd, send_fd, params,
ao_how, aop_console_how);
}
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 93bb41e..df29bc3 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -196,6 +196,10 @@ static int disk_try_backend(disk_try_backend_args *a,
goto bad_format;
}
+ if (libxl_defbool_val(a->disk->colo_enable) ||
+ a->disk->active_disk || a->disk->hidden_disk)
+ goto bad_colo;
+
if (a->disk->backend_domid != LIBXL_TOOLSTACK_DOMID) {
LOG(DEBUG, "Disk vdev=%s, is using a storage driver domain, "
"skipping physical device check", a->disk->vdev);
@@ -218,6 +222,10 @@ static int disk_try_backend(disk_try_backend_args *a,
case LIBXL_DISK_BACKEND_TAP:
if (a->disk->script) goto bad_script;
+ if (libxl_defbool_val(a->disk->colo_enable) ||
+ a->disk->active_disk || a->disk->hidden_disk)
+ goto bad_colo;
+
if (a->disk->is_cdrom) {
LOG(DEBUG, "Disk vdev=%s, backend tap unsuitable for cdroms",
a->disk->vdev);
@@ -236,6 +244,16 @@ static int disk_try_backend(disk_try_backend_args *a,
case LIBXL_DISK_BACKEND_QDISK:
if (a->disk->script) goto bad_script;
+ if (libxl_defbool_val(a->disk->colo_enable)) {
+ if (!a->disk->colo_params)
+ goto bad_colo_params;
+
+ if (!a->disk->active_disk)
+ goto bad_active_disk;
+
+ if (!a->disk->hidden_disk)
+ goto bad_hidden_disk;
+ }
return backend;
default:
@@ -256,6 +274,26 @@ static int disk_try_backend(disk_try_backend_args *a,
LOG(DEBUG, "Disk vdev=%s, backend %s not compatible with script=...",
a->disk->vdev, libxl_disk_backend_to_string(backend));
return 0;
+
+ bad_colo:
+ LOG(DEBUG, "Disk vdev=%s, backend %s not compatible with colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_colo_params:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs colo-params=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_active_disk:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs active-disk=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
+
+ bad_hidden_disk:
+ LOG(DEBUG, "Disk vdev=%s, backend %s needs hidden-disk=... for colo",
+ a->disk->vdev, libxl_disk_backend_to_string(backend));
+ return 0;
}
int libxl__device_disk_set_backend(libxl__gc *gc, libxl_device_disk *disk) {
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 33f9ce6..ac97baa 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -427,6 +427,211 @@ static char *dm_spice_options(libxl__gc *gc,
return opt;
}
+/* colo mode */
+enum {
+ LIBXL__COLO_NONE = 0,
+ LIBXL__COLO_PRIMARY,
+ LIBXL__COLO_SECONDARY,
+};
+
+/* The format of colo-params: host:port:exportname=xx */
+static int parse_colo_params(libxl__gc *gc, const char *colo_params,
+ const char **host, const char **port,
+ const char **exportname)
+{
+ const char *delim;
+
+ delim = strstr(colo_params, ":");
+ if (!delim)
+ return 1;
+ if (delim == colo_params)
+ return 1;
+ *host = libxl__strndup(gc, colo_params, delim - colo_params);
+ colo_params = delim + 1;
+
+ delim = strstr(colo_params, ":");
+ if (!delim)
+ return 1;
+ if (delim == colo_params)
+ return 1;
+ *port = libxl__strndup(gc, colo_params, delim - colo_params);
+ colo_params = delim + 1;
+
+ if (strncmp(colo_params, "exportname=", strlen("exportname=")))
+ return 1;
+ *exportname = colo_params + strlen("exportname=");
+ if ((*exportname)[0] == 0)
+ return 1;
+
+ return 0;
+}
+
+static char *qemu_disk_scsi_drive_string(libxl__gc *gc, const char *pdev_path,
+ int unit, const char *format,
+ const libxl_device_disk *disk,
+ const char *nbd_target,
+ int colo_mode)
+{
+ char *drive = NULL;
+ const char *host = NULL, *port = NULL, *exportname = NULL;
+ libxl_ctx *ctx = libxl__gc_owner(gc);
+ const char *colo_params = disk->colo_params;
+ const char *active_disk = disk->active_disk;
+ const char *hidden_disk = disk->hidden_disk;
+
+ switch (colo_mode) {
+ case LIBXL__COLO_NONE:
+ drive = libxl__sprintf
+ (gc, "file=%s,if=scsi,bus=0,unit=%d,format=%s,cache=writeback",
+ pdev_path, unit, format);
+ break;
+ case LIBXL__COLO_PRIMARY:
+ /*
+ * primary:
+ * -dirve if=scsi,bus=0,unit=x,cache=writeback,driver=quorum,\
+ * children.0.file.filename=pdev_path,\
+ * children.0.driver=format,\
+ * children.1.file.host=host,\
+ * children.1.file.port=port,\
+ * children.1.file.export=exportname,\
+ * children.1.file.driver=nbd+colo,\
+ * children.1.driver=raw,\
+ * children.1.ignore-errors=on,\
+ * read-pattern=fifo
+ */
+
+ if (parse_colo_params(gc, colo_params, &host, &port, &exportname))
+ break;
+
+ drive = libxl__sprintf
+ (gc, "if=scsi,bus=0,unit=%d,cache=writeback,driver=quorum,"
+ "children.0.file.filename=%s,"
+ "children.0.driver=%s,"
+ "children.1.file.host=%s,"
+ "children.1.file.port=%s,"
+ "children.1.file.export=%s,"
+ "children.1.file.driver=nbd+colo,"
+ "children.1.driver=raw,"
+ "children.1.ignore-errors=on,"
+ "read-pattern=fifo",
+ unit, pdev_path, format, host, port, exportname);
+ break;
+ case LIBXL__COLO_SECONDARY:
+ /*
+ * secondary:
+ * -drive if=scsi,bus=0,unit=x,cache=writeback,driver=qcow2+colo,\
+ * file=active_disk,\
+ * backing_reference.drive_id=nbd_target,\
+ * backing_reference.hidden-disk.file.filename=hidden_disk,\
+ * backing_reference.hidden-disk.allow-write-backing-file=on,\
+ * export=exportname,
+ */
+
+ if (parse_colo_params(gc, colo_params, &host, &port, &exportname))
+ break;
+
+ drive = libxl__sprintf
+ (gc, "if=scsi,bus=0,unit=%d,cache=writeback,driver=qcow2+colo,"
+ "file=%s,"
+ "backing_reference.drive_id=%s,"
+ "backing_reference.hidden-disk.file.filename=%s,"
+ "backing_reference.hidden-disk.allow-write-backing-file=on,"
+ "export=%s",
+ unit, active_disk, nbd_target, hidden_disk, exportname);
+ break;
+ default:
+ abort();
+ }
+
+ if (!drive)
+ LIBXL__LOG(ctx, LIBXL__LOG_WARNING,
+ "colo-params is invalid for %s", pdev_path);
+ return drive;
+}
+
+static char *qemu_disk_ide_drive_string(libxl__gc *gc, const char *pdev_path,
+ int unit, const char *format,
+ const libxl_device_disk *disk,
+ const char *nbd_target,
+ int colo_mode)
+{
+ char *drive = NULL;
+ const char *host = NULL, *port = NULL, *exportname = NULL;
+ libxl_ctx *ctx = libxl__gc_owner(gc);
+ const char *colo_params = disk->colo_params;
+ const char *active_disk = disk->active_disk;
+ const char *hidden_disk = disk->hidden_disk;
+
+ switch (colo_mode) {
+ case LIBXL__COLO_NONE:
+ drive = libxl__sprintf
+ (gc, "file=%s,if=ide,index=%d,media=disk,format=%s,cache=writeback",
+ pdev_path, unit, format);
+ break;
+ case LIBXL__COLO_PRIMARY:
+ /*
+ * primary:
+ * -dirve if=ide,index=x,media=disk,cache=writeback,driver=quorum,\
+ * children.0.file.filename=pdev_path,\
+ * children.0.driver=format,\
+ * children.1.file.host=host,\
+ * children.1.file.port=port,\
+ * children.1.file.export=exportname,\
+ * children.1.file.driver=nbd+colo,\
+ * children.1.driver=raw,\
+ * children.1.ignored-errors=on,\
+ * read-pattern=fifo
+ */
+
+ if (parse_colo_params(gc, colo_params, &host, &port, &exportname))
+ break;
+
+ drive = libxl__sprintf
+ (gc, "if=ide,index=%d,media=disk,cache=writeback,driver=quorum,"
+ "children.0.file.filename=%s,"
+ "children.0.driver=%s,"
+ "children.1.file.host=%s,"
+ "children.1.file.port=%s,"
+ "children.1.file.export=%s,"
+ "children.1.file.driver=nbd+colo,"
+ "children.1.driver=raw,"
+ "children.1.ignore-errors=on,"
+ "read-pattern=fifo",
+ unit, pdev_path, format, host, port, exportname);
+ break;
+ case LIBXL__COLO_SECONDARY:
+ /*
+ * secondary:
+ * -drive if=ide,index=x,media=disk,cache=writeback,driver=qcow2+colo,\
+ * file=active_disk,\
+ * backing_reference.drive_id=nbd_target,\
+ * backing_reference.hidden-disk.file.filename=hidden_disk,\
+ * backing_reference.hidden-disk.allow-write-backing-file=on,\
+ * export=exportname,
+ */
+
+ if (parse_colo_params(gc, colo_params, &host, &port, &exportname))
+ break;
+
+ drive = libxl__sprintf
+ (gc, "if=ide,index=%d,media=disk,cache=writeback,driver=qcow2+colo,"
+ "file=%s,"
+ "backing_reference.drive_id=%s,"
+ "backing_reference.hidden-disk.file.filename=%s,"
+ "backing_reference.hidden-disk.allow-write-backing-file=on,"
+ "export=%s",
+ unit, active_disk, nbd_target, hidden_disk, exportname);
+ break;
+ default:
+ abort();
+ }
+
+ if (!drive)
+ LIBXL__LOG(ctx, LIBXL__LOG_WARNING,
+ "colo-params is invalid for %s", pdev_path);
+ return drive;
+}
+
static int libxl__build_device_model_args_new(libxl__gc *gc,
const char *dm, int guest_domid,
const libxl_domain_config *guest_config,
@@ -825,6 +1030,8 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
const char *format = qemu_disk_format_string(disks[i].format);
char *drive;
const char *pdev_path;
+ int colo_mode;
+ char *drive_id;
if (dev_number == -1) {
LIBXL__LOG(ctx, LIBXL__LOG_WARNING, "unable to determine"
@@ -868,16 +1075,55 @@ static int libxl__build_device_model_args_new(libxl__gc *gc,
* For other disks we translate devices 0..3 into
* hd[a-d] and ignore the rest.
*/
- if (strncmp(disks[i].vdev, "sd", 2) == 0)
- drive = libxl__sprintf
- (gc, "file=%s,if=scsi,bus=0,unit=%d,format=%s,cache=writeback",
- pdev_path, disk, format);
- else if (disk < 4)
+ if (libxl_defbool_val(disks[i].colo_enable)) {
+ if (libxl_defbool_val(disks[i].colo_restore_enable))
+ colo_mode = LIBXL__COLO_SECONDARY;
+ else
+ colo_mode = LIBXL__COLO_PRIMARY;
+ } else {
+ colo_mode = LIBXL__COLO_NONE;
+ }
+
+ if (colo_mode == LIBXL__COLO_SECONDARY) {
+ /*
+ * -drive if=none,driver=format,file=pdev_path,\
+ * id=nbd_targetx
+ */
+ if (strncmp(disks[i].vdev, "sd", 2) == 0) {
+ drive_id = libxl__sprintf(gc, "nbd_target%d", disk + 4);
+ } else if (disk < 4) {
+ drive_id = libxl__sprintf(gc, "nbd_target%d", disk);
+ } else {
+ continue; /* Do not emulate this disk */
+ }
drive = libxl__sprintf
- (gc, "file=%s,if=ide,index=%d,media=disk,format=%s,cache=writeback",
- pdev_path, disk, format);
- else
+ (gc, "if=none,driver=%s,file=%s,id=%s",
+ format, pdev_path, drive_id);
+
+ flexarray_append(dm_args, "-drive");
+ flexarray_append(dm_args, drive);
+ } else {
+ drive_id = NULL;
+ }
+
+ if (strncmp(disks[i].vdev, "sd", 2) == 0) {
+ drive = qemu_disk_scsi_drive_string(gc, pdev_path, disk,
+ format,
+ &disks[i],
+ drive_id,
+ colo_mode);
+ } else if (disk < 4) {
+ drive = qemu_disk_ide_drive_string(gc, pdev_path, disk,
+ format,
+ &disks[i],
+ drive_id,
+ colo_mode);
+ } else {
continue; /* Do not emulate this disk */
+ }
+
+ if (!drive)
+ continue;
}
flexarray_append(dm_args, "-drive");
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index cf1eeb2..9adc3ce 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -517,6 +517,11 @@ libxl_device_disk = Struct("device_disk", [
("is_cdrom", integer),
("direct_io_safe", bool),
("discard_enable", libxl_defbool),
+ ("colo_enable", libxl_defbool),
+ ("colo_restore_enable", libxl_defbool),
+ ("colo_params", string),
+ ("active_disk", string),
+ ("hidden_disk", string)
])
libxl_device_nic = Struct("device_nic", [
diff --git a/tools/libxl/libxlu_disk_l.l b/tools/libxl/libxlu_disk_l.l
index 1a5deb5..566aa1e 100644
--- a/tools/libxl/libxlu_disk_l.l
+++ b/tools/libxl/libxlu_disk_l.l
@@ -176,6 +176,11 @@ script=[^,]*,? { STRIP(','); SAVESTRING("script", script, FROMEQUALS); }
direct-io-safe,? { DPC->disk->direct_io_safe = 1; }
discard,? { libxl_defbool_set(&DPC->disk->discard_enable, true); }
no-discard,? { libxl_defbool_set(&DPC->disk->discard_enable, false); }
+colo,? { libxl_defbool_set(&DPC->disk->colo_enable, true); }
+no-colo,? { libxl_defbool_set(&DPC->disk->colo_enable, false); }
+colo-params=[^,]*,? { STRIP(','); SAVESTRING("colo-params", colo_params, FROMEQUALS); }
+active-disk=[^,]*,? { STRIP(','); SAVESTRING("active-disk", active_disk, FROMEQUALS); }
+hidden-disk=[^,]*,? { STRIP(','); SAVESTRING("hidden-disk", hidden_disk, FROMEQUALS); }
/* the target magic parameter, eats the rest of the string */
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 12/18] COLO: use qemu block replication
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (10 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 11/18] Support colo mode for qemu disk Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module Yang Hongyang
` (6 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
From: Wen Congyang <wency@cn.fujitsu.com>
Use qemu block replication as our block replication solution.
Note that guest must be paused before starting COLO, otherwise,
the disk won't be consistent between primary and secondary.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
for commit message,
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo_qdisk.c | 209 +++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_colo_restore.c | 20 +++-
tools/libxl/libxl_colo_save.c | 36 ++++++-
tools/libxl/libxl_internal.h | 18 ++++
tools/libxl/libxl_qmp.c | 31 ++++++
6 files changed, 311 insertions(+), 4 deletions(-)
create mode 100644 tools/libxl/libxl_colo_qdisk.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 252c4e9..2e62b88 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -58,6 +58,7 @@ endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
+LIBXL_OBJS-y += libxl_colo_qdisk.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo_qdisk.c b/tools/libxl/libxl_colo_qdisk.c
new file mode 100644
index 0000000..d73572e
--- /dev/null
+++ b/tools/libxl/libxl_colo_qdisk.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2015 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+typedef struct libxl__colo_qdisk {
+ libxl__checkpoint_device *dev;
+} libxl__colo_qdisk;
+
+/* ========== init() and cleanup() ========== */
+int init_subkind_qdisk(libxl__checkpoint_devices_state *cds)
+{
+ /*
+ * We don't know if we use qemu block replication, so
+ * we cannot start block replication here.
+ */
+ return 0;
+}
+
+void cleanup_subkind_qdisk(libxl__checkpoint_devices_state *cds)
+{
+}
+
+/* ========== setup() and teardown() ========== */
+static void colo_qdisk_setup(libxl__egc *egc, libxl__checkpoint_device *dev,
+ bool primary)
+{
+ const libxl_device_disk *disk = dev->backend_dev;
+ const char *addr = NULL;
+ const char *export_name;
+ int ret, rc = 0;
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = dev->cds;
+ const char *colo_params = disk->colo_params;
+ const int domid = cds->domid;
+
+ EGC_GC;
+
+ if (disk->backend != LIBXL_DISK_BACKEND_QDISK ||
+ !libxl_defbool_val(disk->colo_enable)) {
+ rc = ERROR_CHECKPOINT_DEVOPS_DOES_NOT_MATCH;
+ goto out;
+ }
+
+ export_name = strstr(colo_params, ":exportname=");
+ if (!export_name) {
+ rc = ERROR_CHECKPOINT_DEVOPS_DOES_NOT_MATCH;
+ goto out;
+ }
+ export_name += strlen(":exportname=");
+ if (export_name[0] == 0) {
+ rc = ERROR_CHECKPOINT_DEVOPS_DOES_NOT_MATCH;
+ goto out;
+ }
+
+ dev->matched = 1;
+
+ if (primary) {
+ /* NBD server is not ready, so we cannot start block replication now */
+ goto out;
+ } else {
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+ int len;
+
+ if (crs->qdisk_setuped)
+ goto out;
+
+ crs->qdisk_setuped = true;
+
+ len = export_name - strlen(":exportname=") - colo_params;
+ addr = libxl__strndup(gc, colo_params, len);
+ }
+
+ ret = libxl__qmp_block_start_replication(gc, domid, primary, addr);
+ if (ret)
+ rc = ERROR_FAIL;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_qdisk_teardown(libxl__egc *egc, libxl__checkpoint_device *dev,
+ bool primary)
+{
+ int ret, rc = 0;
+
+ /* Convenience aliases */
+ libxl__checkpoint_devices_state *const cds = dev->cds;
+ const int domid = cds->domid;
+
+ EGC_GC;
+
+ if (primary) {
+ libxl__colo_save_state *css = CONTAINER_OF(cds, *css, cds);
+
+ if (!css->qdisk_setuped)
+ goto out;
+
+ css->qdisk_setuped = false;
+ } else {
+ libxl__colo_restore_state *crs = CONTAINER_OF(cds, *crs, cds);
+
+ if (!crs->qdisk_setuped)
+ goto out;
+
+ crs->qdisk_setuped = false;
+ }
+
+ ret = libxl__qmp_block_stop_replication(gc, domid, primary);
+ if (ret)
+ rc = ERROR_FAIL;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+/* ========== checkpointing APIs ========== */
+/* should be called after libxl__checkpoint_device_instance_ops.preresume */
+int colo_qdisk_preresume(libxl_ctx *ctx, domid_t domid)
+{
+ GC_INIT(ctx);
+ int ret;
+
+ ret = libxl__qmp_block_do_checkpoint(gc, domid);
+
+ GC_FREE;
+ return ret;
+}
+
+static void colo_qdisk_save_preresume(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+ int ret, rc = 0;
+
+ /* Convenience aliases */
+ const int domid = dev->cds->domid;
+
+ EGC_GC;
+
+ if (css->qdisk_setuped)
+ goto out;
+
+ css->qdisk_setuped = true;
+
+ ret = libxl__qmp_block_start_replication(gc, domid, true, NULL);
+ if (ret)
+ rc = ERROR_FAIL;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+/* ======== primary ======== */
+static void colo_qdisk_save_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_setup(egc, dev, true);
+}
+
+static void colo_qdisk_save_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_teardown(egc, dev, true);
+}
+
+const libxl__checkpoint_device_instance_ops colo_save_device_qdisk = {
+ .kind = LIBXL__DEVICE_KIND_VBD,
+ .setup = colo_qdisk_save_setup,
+ .teardown = colo_qdisk_save_teardown,
+ .preresume = colo_qdisk_save_preresume,
+};
+
+/* ======== secondary ======== */
+static void colo_qdisk_restore_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_setup(egc, dev, false);
+}
+
+static void colo_qdisk_restore_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ colo_qdisk_teardown(egc, dev, false);
+}
+
+const libxl__checkpoint_device_instance_ops colo_restore_device_qdisk = {
+ .kind = LIBXL__DEVICE_KIND_VBD,
+ .setup = colo_qdisk_restore_setup,
+ .teardown = colo_qdisk_restore_teardown,
+};
diff --git a/tools/libxl/libxl_colo_restore.c b/tools/libxl/libxl_colo_restore.c
index ada9a35..0a58b86 100644
--- a/tools/libxl/libxl_colo_restore.c
+++ b/tools/libxl/libxl_colo_restore.c
@@ -49,7 +49,10 @@ static void libxl__colo_restore_domain_checkpoint_callback(void *data);
static void libxl__colo_restore_domain_should_checkpoint_callback(void *data);
static void libxl__colo_restore_domain_suspend_callback(void *data);
+extern const libxl__checkpoint_device_instance_ops colo_restore_device_qdisk;
+
static const libxl__checkpoint_device_instance_ops *colo_restore_ops[] = {
+ &colo_restore_device_qdisk,
NULL,
};
@@ -148,7 +151,11 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
+ rc = init_subkind_qdisk(cds);
+ if (rc) goto out;
+
rc = 0;
+out:
return rc;
}
@@ -156,6 +163,8 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
{
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+
+ cleanup_subkind_qdisk(cds);
}
@@ -215,6 +224,7 @@ void libxl__colo_restore_setup(libxl__egc *egc,
GCNEW(crcs);
crs->crcs = crcs;
crcs->crs = crs;
+ crs->qdisk_setuped = false;
/* setup dsps */
crcs->dsps.ao = ao;
@@ -518,6 +528,12 @@ static void colo_restore_preresume_cb(libxl__egc *egc,
goto out;
}
+ rc = colo_qdisk_preresume(CTX, crs->domid);
+ if (rc) {
+ LOG(ERROR, "colo_qdisk_preresume() fails");
+ goto out;
+ }
+
colo_restore_resume_vm(egc, crcs);
return;
@@ -673,8 +689,8 @@ static void colo_setup_checkpoint_devices(libxl__egc *egc,
STATE_AO_GC(crs->ao);
- /* TODO: disk/nic support */
- cds->device_kind_flags = 0;
+ /* TODO: nic support */
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
cds->callback = colo_restore_setup_cds_done;
cds->ao = ao;
cds->domid = crs->domid;
diff --git a/tools/libxl/libxl_colo_save.c b/tools/libxl/libxl_colo_save.c
index 4e059cc..633887b 100644
--- a/tools/libxl/libxl_colo_save.c
+++ b/tools/libxl/libxl_colo_save.c
@@ -19,7 +19,10 @@
#include "libxl_internal.h"
#include "libxl_colo.h"
+extern const libxl__checkpoint_device_instance_ops colo_save_device_qdisk;
+
static const libxl__checkpoint_device_instance_ops *colo_ops[] = {
+ &colo_save_device_qdisk,
NULL,
};
@@ -30,7 +33,11 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
+ rc = init_subkind_qdisk(cds);
+ if (rc) goto out;
+
rc = 0;
+out:
return rc;
}
@@ -38,6 +45,8 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
{
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+
+ cleanup_subkind_qdisk(cds);
}
/* ================= colo: setup save environment ================= */
@@ -65,9 +74,11 @@ void libxl__colo_save_setup(libxl__egc *egc, libxl__colo_save_state *css)
css->send_fd = dss->fd;
css->recv_fd = dss->recv_fd;
css->svm_running = false;
+ css->paused = true;
+ css->qdisk_setuped = false;
- /* TODO: disk/nic support */
- cds->device_kind_flags = 0;
+ /* TODO: nic support */
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
cds->ops = colo_ops;
cds->callback = colo_save_setup_done;
cds->ao = ao;
@@ -388,12 +399,33 @@ static void colo_preresume_cb(libxl__egc *egc,
goto out;
}
+ if (!css->paused) {
+ rc = colo_qdisk_preresume(CTX, dss->domid);
+ if (rc) {
+ LOG(ERROR, "colo_qdisk_preresume() fails");
+ goto out;
+ }
+ }
+
/* Resumes the domain and the device model */
if (libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1)) {
LOG(ERROR, "cannot resume primary vm");
goto out;
}
+ /*
+ * The guest should be paused before doing colo because there is
+ * no disk migration.
+ */
+ if (css->paused) {
+ rc = libxl_domain_unpause(CTX, dss->domid);
+ if (rc) {
+ LOG(ERROR, "cannot unpause primary vm");
+ goto out;
+ }
+ css->paused = false;
+ }
+
/* read COLO_SVM_RESUMED */
css->callback = colo_read_svm_resumed_done;
css->srs.read_records_callback = colo_common_read_stream_done;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index bb5e298..18adf66 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1662,6 +1662,14 @@ _hidden int libxl__qmp_set_global_dirty_log(libxl__gc *gc, int domid, bool enabl
_hidden int libxl__qmp_insert_cdrom(libxl__gc *gc, int domid, const libxl_device_disk *disk);
/* Add a virtual CPU */
_hidden int libxl__qmp_cpu_add(libxl__gc *gc, int domid, int index);
+/* Start block replication */
+_hidden int libxl__qmp_block_start_replication(libxl__gc *gc, int domid,
+ bool primary, const char *addr);
+/* Do block checkpoint */
+_hidden int libxl__qmp_block_do_checkpoint(libxl__gc *gc, int domid);
+/* Stop block replication */
+_hidden int libxl__qmp_block_stop_replication(libxl__gc *gc, int domid,
+ bool primary);
/* close and free the QMP handler */
_hidden void libxl__qmp_close(libxl__qmp_handler *qmp);
/* remove the socket file, if the file has already been removed,
@@ -2735,6 +2743,9 @@ int init_subkind_nic(libxl__checkpoint_devices_state *cds);
void cleanup_subkind_nic(libxl__checkpoint_devices_state *cds);
int init_subkind_drbd_disk(libxl__checkpoint_devices_state *cds);
void cleanup_subkind_drbd_disk(libxl__checkpoint_devices_state *cds);
+int init_subkind_qdisk(libxl__checkpoint_devices_state *cds);
+void cleanup_subkind_qdisk(libxl__checkpoint_devices_state *cds);
+int colo_qdisk_preresume(libxl_ctx *ctx, domid_t domid);
typedef void libxl__checkpoint_callback(libxl__egc *,
libxl__checkpoint_devices_state *,
@@ -2932,6 +2943,10 @@ struct libxl__colo_save_state {
libxl__stream_read_state srs;
void (*callback)(libxl__egc *, libxl__colo_save_state *, int);
bool svm_running;
+ bool paused;
+
+ /* private, used by qdisk block replication */
+ bool qdisk_setuped;
};
/*----- Domain suspend (save) state structure -----*/
@@ -3314,6 +3329,9 @@ struct libxl__colo_restore_state {
libxl__domain_create_cb *saved_cb;
void *crcs;
libxl__checkpoint_devices_state cds;
+
+ /* private, used by qdisk block replication */
+ bool qdisk_setuped;
};
struct libxl__domain_create_state {
diff --git a/tools/libxl/libxl_qmp.c b/tools/libxl/libxl_qmp.c
index a6f1a21..9714bdf 100644
--- a/tools/libxl/libxl_qmp.c
+++ b/tools/libxl/libxl_qmp.c
@@ -965,6 +965,37 @@ int libxl__qmp_cpu_add(libxl__gc *gc, int domid, int idx)
return qmp_run_command(gc, domid, "cpu-add", args, NULL, NULL);
}
+int libxl__qmp_block_start_replication(libxl__gc *gc, int domid,
+ bool primary, const char *addr)
+{
+ libxl__json_object *args = NULL;
+
+ qmp_parameters_add_bool(gc, &args, "enable", true);
+ qmp_parameters_add_bool(gc, &args, "primary", primary);
+ if (!primary)
+ qmp_parameters_add_string(gc, &args, "addr", addr);
+
+ return qmp_run_command(gc, domid, "xen-set-block-replication", args,
+ NULL, NULL);
+}
+
+int libxl__qmp_block_do_checkpoint(libxl__gc *gc, int domid)
+{
+ return qmp_run_command(gc, domid, "xen-do-block-checkpoint", NULL,
+ NULL, NULL);
+}
+
+int libxl__qmp_block_stop_replication(libxl__gc *gc, int domid, bool primary)
+{
+ libxl__json_object *args = NULL;
+
+ qmp_parameters_add_bool(gc, &args, "enable", false);
+ qmp_parameters_add_bool(gc, &args, "primary", primary);
+
+ return qmp_run_command(gc, domid, "xen-set-block-replication", args,
+ NULL, NULL);
+}
+
int libxl__qmp_initializations(libxl__gc *gc, uint32_t domid,
const libxl_domain_config *guest_config)
{
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (11 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 12/18] COLO: use qemu block replication Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint Yang Hongyang
` (5 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
setup/teardown of COLO proxy module.
we use netlink to communicate with proxy module.
About colo-proxy module:
https://lkml.org/lkml/2015/6/18/32
How to use:
http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo.h | 2 +
tools/libxl/libxl_colo_proxy.c | 210 +++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 12 +++
4 files changed, 225 insertions(+)
create mode 100644 tools/libxl/libxl_colo_proxy.c
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 2e62b88..1beef6c 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -59,6 +59,7 @@ endif
LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-y += libxl_colo_qdisk.o
+LIBXL_OBJS-y += libxl_colo_proxy.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index 49a430b..46ca4cf 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -34,4 +34,6 @@ extern void libxl__colo_save_teardown(libxl__egc *egc,
libxl__colo_save_state *css,
int rc);
+extern int colo_proxy_setup(libxl__colo_proxy_state *cps);
+extern void colo_proxy_teardown(libxl__colo_proxy_state *cps);
#endif
diff --git a/tools/libxl/libxl_colo_proxy.c b/tools/libxl/libxl_colo_proxy.c
new file mode 100644
index 0000000..9f1243e
--- /dev/null
+++ b/tools/libxl/libxl_colo_proxy.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2015 FUJITSU LIMITED
+ * Author: Yang Hongyang <yanghy@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+#include "libxl_colo.h"
+#include <linux/netlink.h>
+
+#define NETLINK_COLO 28
+
+enum colo_netlink_op {
+ COLO_QUERY_CHECKPOINT = (NLMSG_MIN_TYPE + 1),
+ COLO_CHECKPOINT,
+ COLO_FAILOVER,
+ COLO_PROXY_INIT,
+ COLO_PROXY_RESET, /* UNUSED, will be used for continuous FT */
+};
+
+/* ========= colo-proxy: helper functions ========== */
+
+static int colo_proxy_send(libxl__colo_proxy_state *cps, uint8_t *buff, uint64_t size, int type)
+{
+ struct sockaddr_nl sa;
+ struct nlmsghdr msg;
+ struct iovec iov;
+ struct msghdr mh;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_pid = 0;
+ sa.nl_groups = 0;
+
+ msg.nlmsg_len = NLMSG_SPACE(0);
+ msg.nlmsg_flags = NLM_F_REQUEST;
+ if (type == COLO_PROXY_INIT) {
+ msg.nlmsg_flags |= NLM_F_ACK;
+ }
+ msg.nlmsg_seq = 0;
+ /* This is untrusty */
+ msg.nlmsg_pid = cps->index;
+ msg.nlmsg_type = type;
+
+ iov.iov_base = &msg;
+ iov.iov_len = msg.nlmsg_len;
+
+ mh.msg_name = &sa;
+ mh.msg_namelen = sizeof(sa);
+ mh.msg_iov = &iov;
+ mh.msg_iovlen = 1;
+ mh.msg_control = NULL;
+ mh.msg_controllen = 0;
+ mh.msg_flags = 0;
+
+ ret = sendmsg(cps->sock_fd, &mh, 0);
+ if (ret <= 0) {
+ LOG(ERROR, "can't send msg to kernel by netlink: %s",
+ strerror(errno));
+ }
+
+ return ret;
+}
+
+/* error: return -1, otherwise return 0 */
+static int64_t colo_proxy_recv(libxl__colo_proxy_state *cps, uint8_t **buff, int flags)
+{
+ struct sockaddr_nl sa;
+ struct iovec iov;
+ struct msghdr mh = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ };
+ uint32_t size = 16384;
+ int64_t len = 0;
+ int ret;
+
+ STATE_AO_GC(cps->ao);
+ uint8_t *tmp = libxl__malloc(NOGC, size);
+
+ iov.iov_base = tmp;
+ iov.iov_len = size;
+next:
+ ret = recvmsg(cps->sock_fd, &mh, flags);
+ if (ret <= 0) {
+ goto out;
+ }
+
+ len += ret;
+ if (mh.msg_flags & MSG_TRUNC) {
+ size += 16384;
+ tmp = libxl__realloc(NOGC, tmp, size);
+ iov.iov_base = tmp + len;
+ iov.iov_len = size - len;
+ goto next;
+ }
+
+ *buff = tmp;
+ return len;
+
+out:
+ free(tmp);
+ *buff = NULL;
+ return ret;
+}
+
+/* ========= colo-proxy: setup and teardown ========== */
+
+int colo_proxy_setup(libxl__colo_proxy_state *cps)
+{
+ int skfd = 0;
+ struct sockaddr_nl sa;
+ struct nlmsghdr *h;
+ struct timeval tv = {0, 500000}; /* timeout for recvmsg from kernel */
+ int i = 1;
+ int ret = ERROR_FAIL;
+ uint8_t *buff = NULL;
+ int64_t size;
+
+ STATE_AO_GC(cps->ao);
+
+ skfd = socket(PF_NETLINK, SOCK_RAW, NETLINK_COLO);
+ if (skfd < 0) {
+ LOG(ERROR, "can not create a netlink socket: %s", strerror(errno));
+ goto out;
+ }
+ cps->sock_fd = skfd;
+ memset(&sa, 0, sizeof(sa));
+ sa.nl_family = AF_NETLINK;
+ sa.nl_groups = 0;
+retry:
+ sa.nl_pid = i++;
+
+ if (i > 10) {
+ LOG(ERROR, "netlink bind error");
+ goto out;
+ }
+
+ ret = bind(skfd, (struct sockaddr *)&sa, sizeof(sa));
+ if (ret < 0 && errno == EADDRINUSE) {
+ LOG(ERROR, "colo index %d has already in used", sa.nl_pid);
+ goto retry;
+ }
+
+ cps->index = sa.nl_pid;
+ ret = colo_proxy_send(cps, NULL, 0, COLO_PROXY_INIT);
+ if (ret < 0) {
+ goto out;
+ }
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ ret = -1;
+ size = colo_proxy_recv(cps, &buff, 0);
+ /* disable SO_RCVTIMEO */
+ tv.tv_usec = 0;
+ setsockopt(cps->sock_fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv));
+ if (size < 0) {
+ LOG(ERROR, "Can't recv msg from kernel by netlink: %s",
+ strerror(errno));
+ goto out;
+ }
+
+ if (size) {
+ h = (struct nlmsghdr *)buff;
+
+ if (h->nlmsg_type == NLMSG_ERROR) {
+ struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(h);
+ if (size - sizeof(*h) < sizeof(*err)) {
+ goto out;
+ }
+ ret = -err->error;
+ if (ret) {
+ goto out;
+ }
+ }
+ }
+
+ ret = 0;
+
+out:
+ free(buff);
+ if (ret) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+ return ret;
+}
+
+void colo_proxy_teardown(libxl__colo_proxy_state *cps)
+{
+ if (cps->sock_fd >= 0) {
+ close(cps->sock_fd);
+ cps->sock_fd = -1;
+ }
+}
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 18adf66..2e8b3d4 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2933,6 +2933,15 @@ static inline bool libxl__stream_read_inuse(
}
/*----- colo related state structure -----*/
+typedef struct libxl__colo_proxy_state libxl__colo_proxy_state;
+struct libxl__colo_proxy_state {
+ /* set by caller of colo_proxy_setup */
+ libxl__ao *ao;
+
+ int sock_fd;
+ int index;
+};
+
typedef struct libxl__colo_save_state libxl__colo_save_state;
struct libxl__colo_save_state {
libxl__checkpoint_devices_state cds;
@@ -2947,6 +2956,9 @@ struct libxl__colo_save_state {
/* private, used by qdisk block replication */
bool qdisk_setuped;
+
+ /* private, used by colo-proxy */
+ libxl__colo_proxy_state cps;
};
/*----- Domain suspend (save) state structure -----*/
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (12 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind Yang Hongyang
` (4 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
preresume, postresume and checkpoint
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/libxl_colo.h | 3 +++
tools/libxl/libxl_colo_proxy.c | 57 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/tools/libxl/libxl_colo.h b/tools/libxl/libxl_colo.h
index 46ca4cf..4e5f02a 100644
--- a/tools/libxl/libxl_colo.h
+++ b/tools/libxl/libxl_colo.h
@@ -36,4 +36,7 @@ extern void libxl__colo_save_teardown(libxl__egc *egc,
extern int colo_proxy_setup(libxl__colo_proxy_state *cps);
extern void colo_proxy_teardown(libxl__colo_proxy_state *cps);
+extern void colo_proxy_preresume(libxl__colo_proxy_state *cps);
+extern void colo_proxy_postresume(libxl__colo_proxy_state *cps);
+extern int colo_proxy_checkpoint(libxl__colo_proxy_state *cps);
#endif
diff --git a/tools/libxl/libxl_colo_proxy.c b/tools/libxl/libxl_colo_proxy.c
index 9f1243e..c8ff722 100644
--- a/tools/libxl/libxl_colo_proxy.c
+++ b/tools/libxl/libxl_colo_proxy.c
@@ -208,3 +208,60 @@ void colo_proxy_teardown(libxl__colo_proxy_state *cps)
cps->sock_fd = -1;
}
}
+
+/* ========= colo-proxy: preresume, postresume and checkpoint ========== */
+
+void colo_proxy_preresume(libxl__colo_proxy_state *cps)
+{
+ colo_proxy_send(cps, NULL, 0, COLO_CHECKPOINT);
+ /* TODO: need to handle if the call fails... */
+}
+
+void colo_proxy_postresume(libxl__colo_proxy_state *cps)
+{
+ /* nothing to do... */
+}
+
+
+typedef struct colo_msg {
+ bool is_checkpoint;
+} colo_msg;
+
+/*
+do checkpoint: return 1
+error: return -1
+do not checkpoint: return 0
+*/
+int colo_proxy_checkpoint(libxl__colo_proxy_state *cps)
+{
+ uint8_t *buff;
+ int64_t size;
+ struct nlmsghdr *h;
+ struct colo_msg *m;
+ int ret = -1;
+
+ size = colo_proxy_recv(cps, &buff, MSG_DONTWAIT);
+
+ /* timeout, return no checkpoint message. */
+ if (size <= 0) {
+ return 0;
+ }
+
+ h = (struct nlmsghdr *) buff;
+
+ if (h->nlmsg_type == NLMSG_ERROR) {
+ goto out;
+ }
+
+ if (h->nlmsg_len < NLMSG_LENGTH(sizeof(*m))) {
+ goto out;
+ }
+
+ m = NLMSG_DATA(h);
+
+ ret = m->is_checkpoint ? 1 : 0;
+
+out:
+ free(buff);
+ return ret;
+}
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (13 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 16/18] setup and control colo proxy on primary side Yang Hongyang
` (3 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
implement COLO nic subkind.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
tools/hotplug/Linux/Makefile | 1 +
tools/hotplug/Linux/colo-proxy-setup | 131 +++++++++++++++
tools/libxl/Makefile | 1 +
tools/libxl/libxl_colo_nic.c | 317 +++++++++++++++++++++++++++++++++++
tools/libxl/libxl_internal.h | 5 +
tools/libxl/libxl_types.idl | 1 +
6 files changed, 456 insertions(+)
create mode 100755 tools/hotplug/Linux/colo-proxy-setup
create mode 100644 tools/libxl/libxl_colo_nic.c
diff --git a/tools/hotplug/Linux/Makefile b/tools/hotplug/Linux/Makefile
index d94a9cb..1c28bea 100644
--- a/tools/hotplug/Linux/Makefile
+++ b/tools/hotplug/Linux/Makefile
@@ -25,6 +25,7 @@ XEN_SCRIPTS += vscsi
XEN_SCRIPTS += block-iscsi
XEN_SCRIPTS += block-drbd-probe
XEN_SCRIPTS += $(XEN_SCRIPTS-y)
+XEN_SCRIPTS += colo-proxy-setup
SUBDIRS-$(CONFIG_SYSTEMD) += systemd
diff --git a/tools/hotplug/Linux/colo-proxy-setup b/tools/hotplug/Linux/colo-proxy-setup
new file mode 100755
index 0000000..3096a9c
--- /dev/null
+++ b/tools/hotplug/Linux/colo-proxy-setup
@@ -0,0 +1,131 @@
+#! /bin/bash
+
+dir=$(dirname "$0")
+. "$dir/xen-hotplug-common.sh"
+. "$dir/hotplugpath.sh"
+. "$dir/xen-network-ft.sh"
+
+findCommand "$@"
+
+if [ "$command" != "setup" -a "$command" != "teardown" ]
+then
+ echo "Invalid command: $command"
+ log err "Invalid command: $command"
+ exit 1
+fi
+
+evalVariables "$@"
+
+: ${vifname:?}
+: ${forwarddev:?}
+: ${mode:?}
+: ${index:?}
+: ${bridge:?}
+
+forwardbr="colobr0"
+
+if [ "$mode" != "primary" -a "$mode" != "secondary" ]
+then
+ echo "Invalid mode: $mode"
+ log err "Invalid mode: $mode"
+ exit 1
+fi
+
+if [ $index -lt 0 ] || [ $index -gt 100 ]; then
+ echo "index overflow"
+ exit 1
+fi
+
+function setup_primary()
+{
+ do_without_error tc qdisc add dev $vifname root handle 1: prio
+ do_without_error tc filter add dev $vifname parent 1: protocol ip prio 10 \
+ u32 match u32 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter add dev $vifname parent 1: protocol arp prio 11 \
+ u32 match u32 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter add dev $vifname parent 1: protocol ipv6 prio \
+ 12 u32 match u32 0 0 flowid 1:2 action mirred egress mirror \
+ dev $forwarddev
+
+ do_without_error modprobe nf_conntrack_ipv4
+ do_without_error modprobe xt_PMYCOLO sec_dev=$forwarddev
+
+ do_without_error iptables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j PMYCOLO --index $index
+ do_without_error ip6tables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j PMYCOLO --index $index
+ do_without_error arptables -I INPUT -i $forwarddev -j MARK --set-mark $index
+}
+
+function teardown_primary()
+{
+ do_without_error tc filter del dev $vifname parent 1: protocol ip prio 10 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter del dev $vifname parent 1: protocol arp prio 11 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc filter del dev $vifname parent 1: protocol ipv6 prio 12 u32 match u32 \
+ 0 0 flowid 1:2 action mirred egress mirror dev $forwarddev
+ do_without_error tc qdisc del dev $vifname root handle 1: prio
+
+ do_without_error iptables -t mangle -F
+ do_without_error ip6tables -t mangle -F
+ do_without_error arptables -F
+ do_without_error rmmod xt_PMYCOLO
+}
+
+function setup_secondary()
+{
+ do_without_error brctl delif $bridge $vifname
+ do_without_error brctl addbr $forwardbr
+ do_without_error brctl addif $forwardbr $vifname
+ do_without_error brctl addif $forwardbr $forwarddev
+ do_without_error modprobe xt_SECCOLO
+
+ do_without_error iptables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j SECCOLO --index $index
+ do_without_error ip6tables -t mangle -I PREROUTING -m physdev --physdev-in \
+ $vifname -j SECCOLO --index $index
+}
+
+function teardown_secondary()
+{
+ do_without_error brctl delif $forwardbr $forwarddev
+ do_without_error brctl delif $forwardbr $vifname
+ do_without_error brctl delbr $forwardbr
+ do_without_error brctl addif $bridge $vifname
+
+ do_without_error iptables -t mangle -F
+ do_without_error ip6tables -t mangle -F
+ do_without_error rmmod xt_SECCOLO
+}
+
+case "$command" in
+ setup)
+ if [ "$mode" = "primary" ]
+ then
+ setup_primary
+ else
+ setup_secondary
+ fi
+
+ success
+ ;;
+ teardown)
+ if [ "$mode" = "primary" ]
+ then
+ teardown_primary
+ else
+ teardown_secondary
+ fi
+ ;;
+esac
+
+if [ "$mode" = "primary" ]
+then
+ log debug "Successful colo-proxy-setup $command for $vifname." \
+ " vifname: $vifname, index: $index, forwarddev: $forwarddev."
+else
+ log debug "Successful colo-proxy-setup $command for $vifname." \
+ " vifname: $vifname, index: $index, forwarddev: $forwarddev,"\
+ " forwardbr: $forwardbr."
+fi
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 1beef6c..907b195 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -60,6 +60,7 @@ LIBXL_OBJS-y += libxl_remus.o libxl_checkpoint_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-y += libxl_colo_restore.o libxl_colo_save.o
LIBXL_OBJS-y += libxl_colo_qdisk.o
LIBXL_OBJS-y += libxl_colo_proxy.o
+LIBXL_OBJS-y += libxl_colo_nic.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl_colo_nic.c b/tools/libxl/libxl_colo_nic.c
new file mode 100644
index 0000000..6bbbded
--- /dev/null
+++ b/tools/libxl/libxl_colo_nic.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author: Wen Congyang <wency@cn.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+typedef struct libxl__colo_device_nic {
+ int devid;
+ const char *vif;
+} libxl__colo_device_nic;
+
+enum {
+ primary,
+ secondary,
+};
+
+
+/* ========== init() and cleanup() ========== */
+int init_subkind_colo_nic(libxl__checkpoint_devices_state *cds)
+{
+ return 0;
+}
+
+void cleanup_subkind_colo_nic(libxl__checkpoint_devices_state *cds)
+{
+}
+
+/* ========== helper functions ========== */
+static void colo_save_setup_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status);
+static void colo_save_teardown_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status);
+
+/*
+ * If the device has a vifname, then use that instead of
+ * the vifX.Y format.
+ * it must ONLY be used for remus because if driver domains
+ * were in use it would constitute a security vulnerability.
+ */
+static const char *get_vifname(libxl__checkpoint_device *dev,
+ const libxl_device_nic *nic)
+{
+ const char *vifname = NULL;
+ const char *path;
+ int rc;
+
+ STATE_AO_GC(dev->cds->ao);
+
+ /* Convenience aliases */
+ const uint32_t domid = dev->cds->domid;
+
+ path = GCSPRINTF("%s/backend/vif/%d/%d/vifname",
+ libxl__xs_get_dompath(gc, 0), domid, nic->devid);
+ rc = libxl__xs_read_checked(gc, XBT_NULL, path, &vifname);
+ if (!rc && !vifname) {
+ vifname = libxl__device_nic_devname(gc, domid,
+ nic->devid,
+ nic->nictype);
+ }
+
+ return vifname;
+}
+
+/*
+ * the script needs the following env & args
+ * $vifname
+ * $forwarddev
+ * $mode(primary/secondary)
+ * $index
+ * $bridge
+ * setup/teardown as command line arg.
+ */
+static void setup_async_exec(libxl__checkpoint_device *dev, char *op, int side,
+ char *colo_proxy_script)
+{
+ int arraysize, nr = 0;
+ char **env = NULL, **args = NULL;
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ libxl__checkpoint_devices_state *cds = dev->cds;
+ libxl__async_exec_state *aes = &dev->aodev.aes;
+ const libxl_device_nic *nic = dev->backend_dev;
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ STATE_AO_GC(cds->ao);
+
+ /* Convenience aliases */
+ const char *const vif = colo_nic->vif;
+
+ arraysize = 11;
+ GCNEW_ARRAY(env, arraysize);
+ env[nr++] = "vifname";
+ env[nr++] = libxl__strdup(gc, vif);
+ env[nr++] = "forwarddev";
+ env[nr++] = libxl__strdup(gc, nic->forwarddev);
+ env[nr++] = "mode";
+ if (side == primary)
+ env[nr++] = "primary";
+ else
+ env[nr++] = "secondary";
+ env[nr++] = "index";
+ env[nr++] = GCSPRINTF("%d", css->cps.index);
+ env[nr++] = "bridge";
+ env[nr++] = libxl__strdup(gc, nic->bridge);
+ env[nr++] = NULL;
+ assert(nr == arraysize);
+
+ arraysize = 3; nr = 0;
+ GCNEW_ARRAY(args, arraysize);
+ args[nr++] = colo_proxy_script;
+ args[nr++] = op;
+ args[nr++] = NULL;
+ assert(nr == arraysize);
+
+ aes->ao = dev->cds->ao;
+ aes->what = GCSPRINTF("%s %s", args[0], args[1]);
+ aes->env = env;
+ aes->args = args;
+ aes->timeout_ms = LIBXL_HOTPLUG_TIMEOUT * 1000;
+ aes->stdfds[0] = -1;
+ aes->stdfds[1] = -1;
+ aes->stdfds[2] = -1;
+
+ if (!strcmp(op, "teardown"))
+ aes->callback = colo_save_teardown_script_cb;
+ else
+ aes->callback = colo_save_setup_script_cb;
+}
+
+/* ========== setup() and teardown() ========== */
+static void colo_nic_setup(libxl__egc *egc, libxl__checkpoint_device *dev,
+ int side, char *colo_proxy_script)
+{
+ int rc;
+ libxl__colo_device_nic *colo_nic;
+ const libxl_device_nic *nic = dev->backend_dev;
+
+ STATE_AO_GC(dev->cds->ao);
+
+ /*
+ * thers's no subkind of nic devices, so nic ops is always matched
+ * with nic devices, we begin to setup the nic device
+ */
+ dev->matched = 1;
+
+ if (!nic->forwarddev) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ GCNEW(colo_nic);
+ dev->concrete_data = colo_nic;
+ colo_nic->devid = nic->devid;
+ colo_nic->vif = get_vifname(dev, nic);
+ if (!colo_nic->vif) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ setup_async_exec(dev, "setup", side, colo_proxy_script);
+ rc = libxl__async_exec_start(gc, &dev->aodev.aes);
+ if (rc)
+ goto out;
+
+ return;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_save_setup_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status)
+{
+ libxl__ao_device *aodev = CONTAINER_OF(aes, *aodev, aes);
+ libxl__checkpoint_device *dev = CONTAINER_OF(aodev, *dev, aodev);
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ libxl__checkpoint_devices_state *cds = dev->cds;
+ const char *out_path_base, *hotplug_error = NULL;
+ int rc;
+
+ STATE_AO_GC(cds->ao);
+
+ /* Convenience aliases */
+ const uint32_t domid = cds->domid;
+ const int devid = colo_nic->devid;
+ const char *const vif = colo_nic->vif;
+
+ out_path_base = GCSPRINTF("%s/colo_proxy/%d",
+ libxl__xs_libxl_path(gc, domid), devid);
+
+ rc = libxl__xs_read_checked(gc, XBT_NULL,
+ GCSPRINTF("%s/hotplug-error", out_path_base),
+ &hotplug_error);
+ if (rc)
+ goto out;
+
+ if (hotplug_error) {
+ LOG(ERROR, "colo_proxy script %s setup failed for vif %s: %s",
+ aes->args[0], vif, hotplug_error);
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (status) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+static void colo_nic_teardown(libxl__egc *egc, libxl__checkpoint_device *dev,
+ int side, char *colo_proxy_script)
+{
+ int rc;
+ libxl__colo_device_nic *colo_nic = dev->concrete_data;
+ STATE_AO_GC(dev->cds->ao);
+
+ if (!colo_nic || !colo_nic->vif) {
+ /* colo nic has not yet been set up, just return */
+ rc = 0;
+ goto out;
+ }
+
+ setup_async_exec(dev, "teardown", side, colo_proxy_script);
+
+ rc = libxl__async_exec_start(gc, &dev->aodev.aes);
+ if (rc)
+ goto out;
+
+ return;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void colo_save_teardown_script_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status)
+{
+ int rc;
+ libxl__ao_device *aodev = CONTAINER_OF(aes, *aodev, aes);
+
+ if (status)
+ rc = ERROR_FAIL;
+ else
+ rc = 0;
+
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+/* ======== primary ======== */
+static void colo_nic_save_setup(libxl__egc *egc, libxl__checkpoint_device *dev)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ colo_nic_setup(egc, dev, primary, css->colo_proxy_script);
+}
+
+static void colo_nic_save_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(dev->cds, *css, cds);
+
+ colo_nic_teardown(egc, dev, primary, css->colo_proxy_script);
+}
+
+const libxl__checkpoint_device_instance_ops colo_save_device_nic = {
+ .kind = LIBXL__DEVICE_KIND_VIF,
+ .setup = colo_nic_save_setup,
+ .teardown = colo_nic_save_teardown,
+};
+
+/* ======== secondary ======== */
+static void colo_nic_restore_setup(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(dev->cds, *crs, cds);
+
+ colo_nic_setup(egc, dev, secondary, crs->colo_proxy_script);
+}
+
+static void colo_nic_restore_teardown(libxl__egc *egc,
+ libxl__checkpoint_device *dev)
+{
+ libxl__colo_restore_state *crs = CONTAINER_OF(dev->cds, *crs, cds);
+
+ colo_nic_teardown(egc, dev, secondary, crs->colo_proxy_script);
+}
+
+const libxl__checkpoint_device_instance_ops colo_restore_device_nic = {
+ .kind = LIBXL__DEVICE_KIND_VIF,
+ .setup = colo_nic_restore_setup,
+ .teardown = colo_nic_restore_teardown,
+};
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 2e8b3d4..69306c0 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2746,6 +2746,8 @@ void cleanup_subkind_drbd_disk(libxl__checkpoint_devices_state *cds);
int init_subkind_qdisk(libxl__checkpoint_devices_state *cds);
void cleanup_subkind_qdisk(libxl__checkpoint_devices_state *cds);
int colo_qdisk_preresume(libxl_ctx *ctx, domid_t domid);
+int init_subkind_colo_nic(libxl__checkpoint_devices_state *cds);
+void cleanup_subkind_colo_nic(libxl__checkpoint_devices_state *cds);
typedef void libxl__checkpoint_callback(libxl__egc *,
libxl__checkpoint_devices_state *,
@@ -2947,6 +2949,7 @@ struct libxl__colo_save_state {
libxl__checkpoint_devices_state cds;
int send_fd;
int recv_fd;
+ char *colo_proxy_script;
/* private */
libxl__stream_read_state srs;
@@ -3336,6 +3339,7 @@ struct libxl__colo_restore_state {
int recv_fd;
int hvm;
libxl__colo_callback *callback;
+ char *colo_proxy_script;
/* private, colo restore checkpoint state */
libxl__domain_create_cb *saved_cb;
@@ -3358,6 +3362,7 @@ struct libxl__domain_create_state {
libxl_asyncprogress_how aop_console_how;
/* private to domain_create */
int guest_domid;
+ const char *colo_proxy_script;
libxl__domain_build_state build_state;
libxl__colo_restore_state crs;
libxl__bootloader_state bl;
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9adc3ce..399c75b 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -539,6 +539,7 @@ libxl_device_nic = Struct("device_nic", [
("rate_bytes_per_interval", uint64),
("rate_interval_usecs", uint32),
("gatewaydev", string),
+ ("forwarddev", string)
])
libxl_device_pci = Struct("device_pci", [
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 16/18] setup and control colo proxy on primary side
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (14 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side Yang Hongyang
` (2 subsequent siblings)
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
setup and control colo proxy on primary side
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/libxl_colo_save.c | 124 +++++++++++++++++++++++++++++++++++++++---
tools/libxl/libxl_internal.h | 1 +
2 files changed, 117 insertions(+), 8 deletions(-)
diff --git a/tools/libxl/libxl_colo_save.c b/tools/libxl/libxl_colo_save.c
index 633887b..1b9c1a8 100644
--- a/tools/libxl/libxl_colo_save.c
+++ b/tools/libxl/libxl_colo_save.c
@@ -19,9 +19,11 @@
#include "libxl_internal.h"
#include "libxl_colo.h"
+extern const libxl__checkpoint_device_instance_ops colo_save_device_nic;
extern const libxl__checkpoint_device_instance_ops colo_save_device_qdisk;
static const libxl__checkpoint_device_instance_ops *colo_ops[] = {
+ &colo_save_device_nic,
&colo_save_device_qdisk,
NULL,
};
@@ -33,9 +35,15 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
- rc = init_subkind_qdisk(cds);
+ rc = init_subkind_colo_nic(cds);
if (rc) goto out;
+ rc = init_subkind_qdisk(cds);
+ if (rc) {
+ cleanup_subkind_colo_nic(cds);
+ goto out;
+ }
+
rc = 0;
out:
return rc;
@@ -46,6 +54,7 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+ cleanup_subkind_colo_nic(cds);
cleanup_subkind_qdisk(cds);
}
@@ -76,9 +85,16 @@ void libxl__colo_save_setup(libxl__egc *egc, libxl__colo_save_state *css)
css->svm_running = false;
css->paused = true;
css->qdisk_setuped = false;
+ libxl__ev_child_init(&css->child);
- /* TODO: nic support */
- cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
+ if (dss->remus->netbufscript)
+ css->colo_proxy_script = libxl__strdup(gc, dss->remus->netbufscript);
+ else
+ css->colo_proxy_script = GCSPRINTF("%s/colo-proxy-setup",
+ libxl__xen_script_dir_path());
+
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VIF) |
+ (1 << LIBXL__DEVICE_KIND_VBD);
cds->ops = colo_ops;
cds->callback = colo_save_setup_done;
cds->ao = ao;
@@ -88,6 +104,12 @@ void libxl__colo_save_setup(libxl__egc *egc, libxl__colo_save_state *css)
css->srs.fd = css->recv_fd;
css->srs.back_channel = true;
libxl__stream_read_start(egc, &css->srs);
+ css->cps.ao = ao;
+ if (colo_proxy_setup(&css->cps)) {
+ LOG(ERROR, "COLO: failed to setup colo proxy for guest with domid %u",
+ cds->domid);
+ goto out;
+ }
if (init_device_subkind(cds))
goto out;
@@ -162,6 +184,7 @@ static void colo_teardown_done(libxl__egc *egc,
libxl__domain_save_state *dss = CONTAINER_OF(css, *dss, css);
cleanup_device_subkind(cds);
+ colo_proxy_teardown(&css->cps);
dss->callback(egc, dss, rc);
}
@@ -375,6 +398,8 @@ static void colo_read_svm_ready_done(libxl__egc *egc,
goto out;
}
+ colo_proxy_preresume(&css->cps);
+
css->svm_running = true;
css->cds.callback = colo_preresume_cb;
libxl__checkpoint_devices_preresume(egc, &css->cds);
@@ -451,6 +476,8 @@ static void colo_read_svm_resumed_done(libxl__egc *egc,
goto out;
}
+ colo_proxy_postresume(&css->cps);
+
ok = 1;
out:
@@ -459,6 +486,91 @@ out:
/* ===================== colo: wait new checkpoint ===================== */
+
+static void colo_start_new_checkpoint(libxl__egc *egc,
+ libxl__checkpoint_devices_state *cds,
+ int rc);
+static void colo_proxy_async_wait_for_checkpoint(libxl__colo_save_state *css);
+static void colo_proxy_async_call_done(libxl__egc *egc,
+ libxl__ev_child *child,
+ int pid,
+ int status);
+
+static void colo_proxy_async_call(libxl__egc *egc,
+ libxl__colo_save_state *css,
+ void func(libxl__colo_save_state *),
+ libxl__ev_child_callback callback)
+{
+ int pid = -1, rc;
+
+ STATE_AO_GC(css->cds.ao);
+
+ /* Fork and call */
+ pid = libxl__ev_child_fork(gc, &css->child, callback);
+ if (pid == -1) {
+ LOG(ERROR, "unable to fork");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (!pid) {
+ /* child */
+ func(css);
+ /* notreached */
+ abort();
+ }
+
+ return;
+
+out:
+ callback(egc, &css->child, -1, 1);
+}
+
+static void colo_proxy_wait_for_checkpoint(libxl__egc *egc,
+ libxl__colo_save_state *css)
+{
+ colo_proxy_async_call(egc, css,
+ colo_proxy_async_wait_for_checkpoint,
+ colo_proxy_async_call_done);
+}
+
+static void colo_proxy_async_wait_for_checkpoint(libxl__colo_save_state *css)
+{
+ int req;
+
+again:
+ req = colo_proxy_checkpoint(&css->cps);
+ if (req < 0) {
+ /* some error happens */
+ _exit(1);
+ } else if (!req) {
+ /* no checkpoint is needed, wait for 1ms and the check again */
+ usleep(1000);
+ goto again;
+ } else {
+ /* net packets is not consistent, we need to start a checkpoint */
+ _exit(0);
+ }
+}
+
+static void colo_proxy_async_call_done(libxl__egc *egc,
+ libxl__ev_child *child,
+ int pid,
+ int status)
+{
+ libxl__colo_save_state *css = CONTAINER_OF(child, *css, child);
+
+ EGC_GC;
+
+ if (status) {
+ LOG(ERROR, "failed to wait for new checkpoint");
+ colo_start_new_checkpoint(egc, &css->cds, ERROR_FAIL);
+ return;
+ }
+
+ colo_start_new_checkpoint(egc, &css->cds, 0);
+}
+
/*
* Do the following things:
* 1. do commit
@@ -468,9 +580,6 @@ out:
static void colo_device_commit_cb(libxl__egc *egc,
libxl__checkpoint_devices_state *cds,
int rc);
-static void colo_start_new_checkpoint(libxl__egc *egc,
- libxl__checkpoint_devices_state *cds,
- int rc);
void libxl__colo_save_domain_should_checkpoint_callback(void *data)
{
@@ -499,8 +608,7 @@ static void colo_device_commit_cb(libxl__egc *egc,
goto out;
}
- /* TODO: wait a new checkpoint */
- colo_start_new_checkpoint(egc, cds, 0);
+ colo_proxy_wait_for_checkpoint(egc, css);
return;
out:
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 69306c0..368b452 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2962,6 +2962,7 @@ struct libxl__colo_save_state {
/* private, used by colo-proxy */
libxl__colo_proxy_state cps;
+ libxl__ev_child child;
};
/*----- Domain suspend (save) state structure -----*/
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (15 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 16/18] setup and control colo proxy on primary side Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy Yang Hongyang
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
setup and control colo proxy on secondary side
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
---
tools/libxl/libxl_colo_restore.c | 28 +++++++++++++++++++++++++---
tools/libxl/libxl_internal.h | 3 +++
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/tools/libxl/libxl_colo_restore.c b/tools/libxl/libxl_colo_restore.c
index 0a58b86..f8e5167 100644
--- a/tools/libxl/libxl_colo_restore.c
+++ b/tools/libxl/libxl_colo_restore.c
@@ -49,9 +49,11 @@ static void libxl__colo_restore_domain_checkpoint_callback(void *data);
static void libxl__colo_restore_domain_should_checkpoint_callback(void *data);
static void libxl__colo_restore_domain_suspend_callback(void *data);
+extern const libxl__checkpoint_device_instance_ops colo_restore_device_nic;
extern const libxl__checkpoint_device_instance_ops colo_restore_device_qdisk;
static const libxl__checkpoint_device_instance_ops *colo_restore_ops[] = {
+ &colo_restore_device_nic,
&colo_restore_device_qdisk,
NULL,
};
@@ -151,8 +153,14 @@ static int init_device_subkind(libxl__checkpoint_devices_state *cds)
int rc;
STATE_AO_GC(cds->ao);
+ rc = init_subkind_colo_nic(cds);
+ if (rc) goto out;
+
rc = init_subkind_qdisk(cds);
- if (rc) goto out;
+ if (rc) {
+ cleanup_subkind_colo_nic(cds);
+ goto out;
+ }
rc = 0;
out:
@@ -164,6 +172,7 @@ static void cleanup_device_subkind(libxl__checkpoint_devices_state *cds)
/* cleanup device subkind-specific state in the libxl ctx */
STATE_AO_GC(cds->ao);
+ cleanup_subkind_colo_nic(cds);
cleanup_subkind_qdisk(cds);
}
@@ -351,6 +360,8 @@ static void colo_restore_teardown_done(libxl__egc *egc,
if (crcs->teardown_devices)
cleanup_device_subkind(cds);
+ colo_proxy_teardown(&crs->cps);
+
rc = crcs->saved_rc;
if (!rc) {
crcs->callback = do_failover_done;
@@ -534,6 +545,8 @@ static void colo_restore_preresume_cb(libxl__egc *egc,
goto out;
}
+ colo_proxy_preresume(&crs->cps);
+
colo_restore_resume_vm(egc, crcs);
return;
@@ -570,6 +583,8 @@ static void colo_resume_vm_done(libxl__egc *egc,
crcs->status = LIBXL_COLO_RESUMED;
+ colo_proxy_postresume(&crs->cps);
+
/* avoid calling libxl__xc_domain_restore_done() more than once */
if (crs->saved_cb) {
dcs->callback = crs->saved_cb;
@@ -689,13 +704,20 @@ static void colo_setup_checkpoint_devices(libxl__egc *egc,
STATE_AO_GC(crs->ao);
- /* TODO: nic support */
- cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VBD);
+ cds->device_kind_flags = (1 << LIBXL__DEVICE_KIND_VIF) |
+ (1 << LIBXL__DEVICE_KIND_VBD);
cds->callback = colo_restore_setup_cds_done;
cds->ao = ao;
cds->domid = crs->domid;
cds->ops = colo_restore_ops;
+ crs->cps.ao = ao;
+ if (colo_proxy_setup(&crs->cps)) {
+ LOG(ERROR, "COLO: failed to setup colo proxy for guest with domid %u",
+ cds->domid);
+ goto out;
+ }
+
if (init_device_subkind(cds))
goto out;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 368b452..29b0f64 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3349,6 +3349,9 @@ struct libxl__colo_restore_state {
/* private, used by qdisk block replication */
bool qdisk_setuped;
+
+ /* private, used by colo proxy */
+ libxl__colo_proxy_state cps;
};
struct libxl__domain_create_state {
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (16 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side Yang Hongyang
@ 2015-06-25 6:31 ` Yang Hongyang
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
18 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-06-25 6:31 UTC (permalink / raw)
To: xen-devel
Cc: wei.liu2, ian.campbell, wency, andrew.cooper3, yunhong.jiang,
eddie.dong, guijianfeng, rshriram, ian.jackson
Add cmdline switches to 'xl migrate-receive' command to specify
a domain-specific hotplug script to setup COLO proxy.
Add a new config var 'colo.default.agentscript' to xl.conf, that
allows the user to override the default global script used to
setup COLO proxy.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
---
docs/man/xl.conf.pod.5 | 6 ++++++
docs/man/xl.pod.1 | 1 -
tools/libxl/libxl.c | 6 ++++++
tools/libxl/libxl_create.c | 14 +++++++++++--
tools/libxl/libxl_types.idl | 1 +
tools/libxl/xl.c | 3 +++
tools/libxl/xl.h | 1 +
tools/libxl/xl_cmdimpl.c | 50 ++++++++++++++++++++++++++++++++++-----------
8 files changed, 67 insertions(+), 15 deletions(-)
diff --git a/docs/man/xl.conf.pod.5 b/docs/man/xl.conf.pod.5
index 8ae19bb..8f7fd28 100644
--- a/docs/man/xl.conf.pod.5
+++ b/docs/man/xl.conf.pod.5
@@ -111,6 +111,12 @@ Configures the default script used by Remus to setup network buffering.
Default: C</etc/xen/scripts/remus-netbuf-setup>
+=item B<colo.default.proxyscript="PATH">
+
+Configures the default script used by COLO to setup colo-proxy.
+
+Default: C</etc/xen/scripts/colo-proxy-setup>
+
=item B<output_format="json|sxp">
Configures the default output format used by xl when printing "machine
diff --git a/docs/man/xl.pod.1 b/docs/man/xl.pod.1
index 600facb..d9d834d 100644
--- a/docs/man/xl.pod.1
+++ b/docs/man/xl.pod.1
@@ -454,7 +454,6 @@ N.B: Remus support in xl is still in experimental (proof-of-concept) phase.
Disk replication support is limited to DRBD disks.
COLO support in xl is still in experimental (proof-of-concept) phase.
- There is no support for network at the moment.
B<OPTIONS>
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index db774e4..4e940dd 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -3343,6 +3343,11 @@ void libxl__device_nic_add(libxl__egc *egc, uint32_t domid,
flexarray_append(back, nic->ifname);
}
+ if (nic->forwarddev) {
+ flexarray_append(back, "forwarddev");
+ flexarray_append(back, nic->forwarddev);
+ }
+
flexarray_append(back, "mac");
flexarray_append(back,libxl__sprintf(gc,
LIBXL_MAC_FMT, LIBXL_MAC_BYTES(nic->mac)));
@@ -3466,6 +3471,7 @@ static int libxl__device_nic_from_xs_be(libxl__gc *gc,
nic->ip = READ_BACKEND(NOGC, "ip");
nic->bridge = READ_BACKEND(NOGC, "bridge");
nic->script = READ_BACKEND(NOGC, "script");
+ nic->forwarddev = READ_BACKEND(NOGC, "forwarddev");
/* vif_ioemu nics use the same xenstore entries as vif interfaces */
tmp = READ_BACKEND(gc, "type");
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index f7bf629..2c25d60 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1157,6 +1157,11 @@ static void domcreate_bootloader_done(libxl__egc *egc,
crs->recv_fd = restore_fd;
crs->hvm = (info->type == LIBXL_DOMAIN_TYPE_HVM);
crs->callback = libxl__colo_restore_setup_done;
+ if (dcs->colo_proxy_script)
+ crs->colo_proxy_script = libxl__strdup(gc, dcs->colo_proxy_script);
+ else
+ crs->colo_proxy_script = GCSPRINTF("%s/colo-proxy-setup",
+ libxl__xen_script_dir_path());
libxl__colo_restore_setup(egc, crs);
} else
libxl__stream_read_start(egc, &dcs->srs);
@@ -1676,6 +1681,7 @@ static void domain_create_cb(libxl__egc *egc,
static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
uint32_t *domid, int restore_fd, int send_fd,
const libxl_domain_restore_params *params,
+ const char *colo_proxy_script,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
@@ -1691,6 +1697,7 @@ static int do_domain_create(libxl_ctx *ctx, libxl_domain_config *d_config,
if (params) cdcs->dcs.restore_params = *params;
cdcs->dcs.send_fd = send_fd;
cdcs->dcs.callback = domain_create_cb;
+ cdcs->dcs.colo_proxy_script = colo_proxy_script;
libxl__ao_progress_gethow(&cdcs->dcs.aop_console_how, aop_console_how);
cdcs->domid_out = domid;
@@ -1734,7 +1741,7 @@ int libxl_domain_create_new(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncprogress_how *aop_console_how)
{
unset_disk_colo_restore(d_config);
- return do_domain_create(ctx, d_config, domid, -1, -1, NULL,
+ return do_domain_create(ctx, d_config, domid, -1, -1, NULL, NULL,
ao_how, aop_console_how);
}
@@ -1744,14 +1751,17 @@ int libxl_domain_create_restore(libxl_ctx *ctx, libxl_domain_config *d_config,
const libxl_asyncop_how *ao_how,
const libxl_asyncprogress_how *aop_console_how)
{
+ char *colo_proxy_script = NULL;
+
if (params->checkpointed_stream == LIBXL_CHECKPOINTED_STREAM_COLO) {
+ colo_proxy_script = params->colo_proxy_script;
set_disk_colo_restore(d_config);
} else {
unset_disk_colo_restore(d_config);
}
return do_domain_create(ctx, d_config, domid, restore_fd, send_fd, params,
- ao_how, aop_console_how);
+ colo_proxy_script, ao_how, aop_console_how);
}
/*
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 399c75b..a13c3f9 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -354,6 +354,7 @@ libxl_domain_restore_params = Struct("domain_restore_params", [
("checkpointed_stream", integer),
("stream_version", uint32, {'init_val': '1'}),
("legacy_width", uint32),
+ ("colo_proxy_script", string),
])
libxl_domain_sched_params = Struct("domain_sched_params",[
diff --git a/tools/libxl/xl.c b/tools/libxl/xl.c
index f014306..f44f04f 100644
--- a/tools/libxl/xl.c
+++ b/tools/libxl/xl.c
@@ -45,6 +45,7 @@ char *default_bridge = NULL;
char *default_gatewaydev = NULL;
char *default_vifbackend = NULL;
char *default_remus_netbufscript = NULL;
+char *default_colo_proxy_script = NULL;
enum output_format default_output_format = OUTPUT_FORMAT_JSON;
int claim_mode = 1;
bool progress_use_cr = 0;
@@ -179,6 +180,8 @@ static void parse_global_config(const char *configfile,
xlu_cfg_replace_string (config, "remus.default.netbufscript",
&default_remus_netbufscript, 0);
+ xlu_cfg_replace_string (config, "colo.default.proxyscript",
+ &default_colo_proxy_script, 0);
xlu_cfg_destroy(config);
}
diff --git a/tools/libxl/xl.h b/tools/libxl/xl.h
index 5bc138c..33f25d1 100644
--- a/tools/libxl/xl.h
+++ b/tools/libxl/xl.h
@@ -178,6 +178,7 @@ extern char *default_bridge;
extern char *default_gatewaydev;
extern char *default_vifbackend;
extern char *default_remus_netbufscript;
+extern char *default_colo_proxy_script;
extern char *blkdev_start;
enum output_format {
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index eb1b45f..7515ff8 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -156,6 +156,7 @@ struct domain_create {
const char *config_file;
const char *extra_config; /* extra config string */
const char *restore_file;
+ char *colo_proxy_script;
int migrate_fd; /* -1 means none */
int send_fd; /* -1 means none */
char **migration_domname_r; /* from malloc */
@@ -985,6 +986,8 @@ static int parse_nic_config(libxl_device_nic *nic, XLU_Config **config, char *to
replace_string(&nic->model, oparg);
} else if (MATCH_OPTION("rate", token, oparg)) {
parse_vif_rate(config, oparg, nic);
+ } else if (MATCH_OPTION("forwarddev", token, oparg)) {
+ replace_string(&nic->forwarddev, oparg);
} else if (MATCH_OPTION("accel", token, oparg)) {
fprintf(stderr, "the accel parameter for vifs is currently not supported\n");
} else {
@@ -2731,6 +2734,7 @@ start:
params.checkpointed_stream = dom_info->checkpointed_stream;
params.stream_version =
(hdr.mandatory_flags & XL_MANDATORY_FLAG_STREAMv2) ? 2 : 1;
+ params.colo_proxy_script = dom_info->colo_proxy_script;
ret = libxl_domain_create_restore(ctx, &d_config,
&domid, restore_fd,
@@ -4252,7 +4256,8 @@ static void migrate_domain(uint32_t domid, const char *rune, int debug,
}
static void migrate_receive(int debug, int daemonize, int monitor,
- int send_fd, int recv_fd, int checkpointed)
+ int send_fd, int recv_fd, int checkpointed,
+ char *colo_proxy_script)
{
uint32_t domid;
int rc, rc2;
@@ -4281,6 +4286,7 @@ static void migrate_receive(int debug, int daemonize, int monitor,
dom_info.send_fd = send_fd;
dom_info.migration_domname_r = &migration_domname;
dom_info.checkpointed_stream = checkpointed;
+ dom_info.colo_proxy_script = colo_proxy_script;
if (checkpointed == LIBXL_CHECKPOINTED_STREAM_COLO)
/* COLO uses stdout to send control message to master */
dom_info.quiet = 1;
@@ -4473,8 +4479,9 @@ int main_migrate_receive(int argc, char **argv)
int debug = 0, daemonize = 1, monitor = 1;
int checkpointed = LIBXL_CHECKPOINTED_STREAM_NONE;
int opt;
+ char *script = NULL;
- SWITCH_FOREACH_OPT(opt, "Fedrc", NULL, "migrate-receive", 0) {
+ SWITCH_FOREACH_OPT(opt, "Fedrcn:", NULL, "migrate-receive", 0) {
case 'F':
daemonize = 0;
break;
@@ -4491,6 +4498,9 @@ int main_migrate_receive(int argc, char **argv)
case 'c':
checkpointed = LIBXL_CHECKPOINTED_STREAM_COLO;
break;
+ case 'n':
+ script = optarg;
+ break;
}
if (argc-optind != 0) {
@@ -4499,7 +4509,7 @@ int main_migrate_receive(int argc, char **argv)
}
migrate_receive(debug, daemonize, monitor,
STDOUT_FILENO, STDIN_FILENO,
- checkpointed);
+ checkpointed, script);
return 0;
}
@@ -8022,8 +8032,10 @@ int main_remus(int argc, char **argv)
r_info.interval = 200;
if (libxl_defbool_val(r_info.colo)) {
- if (r_info.interval || libxl_defbool_val(r_info.blackhole)) {
- perror("Option -c conflicts with -i or -b");
+ if (r_info.interval || libxl_defbool_val(r_info.blackhole) ||
+ !libxl_defbool_is_default(r_info.netbuf) ||
+ !libxl_defbool_is_default(r_info.diskbuf)) {
+ perror("option -c is conflict with -i, -d, -n or -b");
exit(-1);
}
@@ -8034,8 +8046,12 @@ int main_remus(int argc, char **argv)
}
}
- if (!r_info.netbufscript)
- r_info.netbufscript = default_remus_netbufscript;
+ if (!r_info.netbufscript) {
+ if (libxl_defbool_val(r_info.colo))
+ r_info.netbufscript = default_colo_proxy_script;
+ else
+ r_info.netbufscript = default_remus_netbufscript;
+ }
if (libxl_defbool_val(r_info.blackhole)) {
send_fd = open("/dev/null", O_RDWR, 0644);
@@ -8048,11 +8064,21 @@ int main_remus(int argc, char **argv)
if (!ssh_command[0]) {
rune = host;
} else {
- if (asprintf(&rune, "exec %s %s xl migrate-receive %s %s",
- ssh_command, host,
- libxl_defbool_val(r_info.colo) ? "-c" : "-r",
- daemonize ? "" : " -e") < 0)
- return 1;
+ if (!libxl_defbool_val(r_info.colo)) {
+ if (asprintf(&rune, "exec %s %s xl migrate-receive %s %s",
+ ssh_command, host,
+ "-r",
+ daemonize ? "" : " -e") < 0)
+ return 1;
+ } else {
+ if (asprintf(&rune, "exec %s %s xl migrate-receive %s %s %s %s",
+ ssh_command, host,
+ "-c",
+ r_info.netbufscript ? "-n" : "",
+ r_info.netbufscript ? r_info.netbufscript : "",
+ daemonize ? "" : " -e") < 0)
+ return 1;
+ }
}
save_domain_core_begin(domid, NULL, &config_data, &config_len);
--
1.9.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v7 COLO 01/18] docs: add colo readme
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
@ 2015-07-14 15:15 ` Ian Campbell
0 siblings, 0 replies; 24+ messages in thread
From: Ian Campbell @ 2015-07-14 15:15 UTC (permalink / raw)
To: Yang Hongyang
Cc: wei.liu2, wency, andrew.cooper3, yunhong.jiang, eddie.dong,
xen-devel, guijianfeng, rshriram, ian.jackson
On Thu, 2015-06-25 at 14:30 +0800, Yang Hongyang wrote:
> add colo readme, refer to
> http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
>
> Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
@ 2015-07-14 15:19 ` Ian Campbell
2015-07-15 0:34 ` Yang Hongyang
0 siblings, 1 reply; 24+ messages in thread
From: Ian Campbell @ 2015-07-14 15:19 UTC (permalink / raw)
To: Yang Hongyang
Cc: wei.liu2, wency, andrew.cooper3, yunhong.jiang, eddie.dong,
xen-devel, guijianfeng, rshriram, ian.jackson
On Thu, 2015-06-25 at 14:30 +0800, Yang Hongyang wrote:
> From: Wen Congyang <wency@cn.fujitsu.com>
>
> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
> ---
> tools/libxl/libxl_internal.h | 3 +++
> tools/libxl/libxl_stream_read.c | 51 +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 54 insertions(+)
This patch is certainly not so trivial that it can get away with a
subject only and no commit body.
The same goes for patch #3.
In particular both of them add some new stream state which is not
described anywhere.
Ian.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
` (17 preceding siblings ...)
2015-06-25 6:31 ` [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy Yang Hongyang
@ 2015-07-14 15:55 ` Ian Campbell
2015-07-15 0:41 ` Yang Hongyang
18 siblings, 1 reply; 24+ messages in thread
From: Ian Campbell @ 2015-07-14 15:55 UTC (permalink / raw)
To: Yang Hongyang
Cc: wei.liu2, wency, andrew.cooper3, yunhong.jiang, eddie.dong,
xen-devel, guijianfeng, rshriram, ian.jackson
On Thu, 2015-06-25 at 14:30 +0800, Yang Hongyang wrote:
> This patchset implemented the COLO feature for Xen.
> For detail/install/use of COLO feature, refer to:
> http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
>
> This patchset is based on:
> [PATCH v3 COLOPre 00/26] Prerequisite patches for COLO
> and on:
> http://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/libxl-migv2-v1
I started going over this but once I got to the meat I realised that it
was based on this older version and that quite a bit had changed in
migrv2 since (and I think migrv2 v4.1 includes bits of this series
already from the looks of it).
I tried to do the naive git rebase, but it resulted in more conflicts
than I could deal with.
So my question is, should I continue to look at this version or should I
await a v8 based on the latest migration stuff?
Have you been following the review of migrv2? In particular I think some
of Ian J's comments there on the state machines and the
comments/assumptions about states etc may apply to bits of this series
too. I'm thinking in particular of the comments on "tools/libxl:
Infrastructure for reading a libxl migration v2 stream" on v2 and v3 or
that series.
Ian.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream
2015-07-14 15:19 ` Ian Campbell
@ 2015-07-15 0:34 ` Yang Hongyang
0 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-07-15 0:34 UTC (permalink / raw)
To: Ian Campbell
Cc: wei.liu2, wency, andrew.cooper3, yunhong.jiang, eddie.dong,
xen-devel, guijianfeng, rshriram, ian.jackson
Hi Ian,
Thanks for the review.
On 07/14/2015 11:19 PM, Ian Campbell wrote:
> On Thu, 2015-06-25 at 14:30 +0800, Yang Hongyang wrote:
>> From: Wen Congyang <wency@cn.fujitsu.com>
>>
>> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
>> ---
>> tools/libxl/libxl_internal.h | 3 +++
>> tools/libxl/libxl_stream_read.c | 51 +++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 54 insertions(+)
>
> This patch is certainly not so trivial that it can get away with a
> subject only and no commit body.
>
> The same goes for patch #3.
>
> In particular both of them add some new stream state which is not
> described anywhere.
This patch is changed a lot due to the migration v2 change, I've added some
commit message in v8, I will add more desciption as you suggested.
>
> Ian.
>
> .
>
--
Thanks,
Yang.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
@ 2015-07-15 0:41 ` Yang Hongyang
0 siblings, 0 replies; 24+ messages in thread
From: Yang Hongyang @ 2015-07-15 0:41 UTC (permalink / raw)
To: Ian Campbell
Cc: wei.liu2, wency, andrew.cooper3, yunhong.jiang, eddie.dong,
xen-devel, guijianfeng, rshriram, ian.jackson
On 07/14/2015 11:55 PM, Ian Campbell wrote:
> On Thu, 2015-06-25 at 14:30 +0800, Yang Hongyang wrote:
>> This patchset implemented the COLO feature for Xen.
>> For detail/install/use of COLO feature, refer to:
>> http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
>>
>> This patchset is based on:
>> [PATCH v3 COLOPre 00/26] Prerequisite patches for COLO
>> and on:
>> http://xenbits.xen.org/gitweb/?p=people/andrewcoop/xen.git;a=shortlog;h=refs/heads/libxl-migv2-v1
>
> I started going over this but once I got to the meat I realised that it
> was based on this older version and that quite a bit had changed in
> migrv2 since (and I think migrv2 v4.1 includes bits of this series
> already from the looks of it).
>
> I tried to do the naive git rebase, but it resulted in more conflicts
> than I could deal with.
>
> So my question is, should I continue to look at this version or should I
> await a v8 based on the latest migration stuff?
Yes. there's quite a lot rebase work to be done. However, I've done the
rebase, but there's some problems with Remus on migration v2(without colo),
I've reported them to Andy and I am looking into them too, hopefully I'll
fix the problem and send the v8 based on the latest migration today.
>
> Have you been following the review of migrv2? In particular I think some
> of Ian J's comments there on the state machines and the
> comments/assumptions about states etc may apply to bits of this series
> too. I'm thinking in particular of the comments on "tools/libxl:
> Infrastructure for reading a libxl migration v2 stream" on v2 and v3 or
> that series.
I'll read Ian's comment and see if we can apply to colo series. Thanks!
>
> Ian.
>
> .
>
--
Thanks,
Yang.
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2015-07-15 0:41 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-25 6:30 [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 01/18] docs: add colo readme Yang Hongyang
2015-07-14 15:15 ` Ian Campbell
2015-06-25 6:30 ` [PATCH v7 COLO 02/18] tools/libxl: handle colo_context records in a libxl migration v2 stream Yang Hongyang
2015-07-14 15:19 ` Ian Campbell
2015-07-15 0:34 ` Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 03/18] tools/libxl: write colo_context records into the stream Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 04/18] secondary vm suspend/resume/checkpoint code Yang Hongyang
2015-06-25 6:30 ` [PATCH v7 COLO 05/18] primary " Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 06/18] libxc/restore: support COLO restore Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 07/18] libxc/restore: send dirty bitmap to primary when checkpoint under colo Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 08/18] send store mfn and console mfn to xl before resuming secondary vm Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 09/18] libxc/save: support COLO save Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 10/18] implement the cmdline for COLO Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 11/18] Support colo mode for qemu disk Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 12/18] COLO: use qemu block replication Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 13/18] COLO proxy: implement setup/teardown of COLO proxy module Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 14/18] COLO proxy: preresume, postresume and checkpoint Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 15/18] COLO nic: implement COLO nic subkind Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 16/18] setup and control colo proxy on primary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 17/18] setup and control colo proxy on secondary side Yang Hongyang
2015-06-25 6:31 ` [PATCH v7 COLO 18/18] cmdline switches and config vars to control colo-proxy Yang Hongyang
2015-07-14 15:55 ` [PATCH v7 COLO 00/18] COarse-grain LOck-stepping Virtual Machines for Non-stop Service Ian Campbell
2015-07-15 0:41 ` Yang Hongyang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).