xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Oleksandr Tyshchenko <olekstysh@gmail.com>
To: xen-devel@lists.xenproject.org
Cc: Stefano Stabellini <sstabellini@kernel.org>,
	Julien Grall <julien@xen.org>, Wei Liu <wl@xen.org>,
	Ian Jackson <ian.jackson@eu.citrix.com>,
	Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>,
	Anthony PERARD <anthony.perard@citrix.com>
Subject: [RFC PATCH V1 10/12] libxl: Add support for virtio-disk configuration
Date: Mon,  3 Aug 2020 21:21:26 +0300	[thread overview]
Message-ID: <1596478888-23030-11-git-send-email-olekstysh@gmail.com> (raw)
In-Reply-To: <1596478888-23030-1-git-send-email-olekstysh@gmail.com>

From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>

This patch adds basic support for configuring and assisting virtio-disk
backend (emualator) which is intended to run out of Qemu and could be run
in any domain.

Xenstore was chosen as a communication interface for the emulator running
in non-toolstack domain to be able to get configuration either by reading
Xenstore directly or by receiving command line parameters (an updated 'xl devd'
running in the same domain would read Xenstore beforehand and call backend
executable with the required arguments).

An example of domain configuration (two disks are assigned to the guest,
the latter is in readonly mode):

vdisk = [ 'backend=DomD, disks=rw:/dev/mmcblk0p3;ro:/dev/mmcblk1p3' ]

Where per-disk Xenstore entries are:
- filename and readonly flag (configured via "vdisk" property)
- base and irq (allocated dynamically)

Besides handling 'visible' params described in configuration file,
patch also allocates virtio-mmio specific ones for each device and
writes them into Xenstore. virtio-mmio params (irq and base) are
unique per guest domain, they allocated at the domain creation time
and passed through to the emulator. Each VirtIO device has at least
one pair of these params.

TODO:
1. An extra "virtio" property could be removed.
2. Update documentation.

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
---
 tools/libxl/Makefile                 |   4 +-
 tools/libxl/libxl_arm.c              |  63 +++++++++++++++----
 tools/libxl/libxl_create.c           |   1 +
 tools/libxl/libxl_internal.h         |   1 +
 tools/libxl/libxl_types.idl          |  15 +++++
 tools/libxl/libxl_types_internal.idl |   1 +
 tools/libxl/libxl_virtio_disk.c      | 109 +++++++++++++++++++++++++++++++++
 tools/xl/Makefile                    |   2 +-
 tools/xl/xl.h                        |   3 +
 tools/xl/xl_cmdtable.c               |  15 +++++
 tools/xl/xl_parse.c                  | 115 +++++++++++++++++++++++++++++++++++
 tools/xl/xl_virtio_disk.c            |  46 ++++++++++++++
 12 files changed, 360 insertions(+), 15 deletions(-)
 create mode 100644 tools/libxl/libxl_virtio_disk.c
 create mode 100644 tools/xl/xl_virtio_disk.c

diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 38cd43a..df94b13 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -141,7 +141,9 @@ LIBXL_OBJS = flexarray.o libxl.o libxl_create.o libxl_dm.o libxl_pci.o \
 			libxl_vtpm.o libxl_nic.o libxl_disk.o libxl_console.o \
 			libxl_cpupool.o libxl_mem.o libxl_sched.o libxl_tmem.o \
 			libxl_9pfs.o libxl_domain.o libxl_vdispl.o \
-			libxl_pvcalls.o libxl_vsnd.o libxl_vkb.o $(LIBXL_OBJS-y)
+			libxl_pvcalls.o libxl_vsnd.o libxl_vkb.o \
+			libxl_virtio_disk.o $(LIBXL_OBJS-y)
+
 LIBXL_OBJS += libxl_genid.o
 LIBXL_OBJS += _libxl_types.o libxl_flask.o _libxl_types_internal.o
 
diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
index 4f748e3..469a8b0 100644
--- a/tools/libxl/libxl_arm.c
+++ b/tools/libxl/libxl_arm.c
@@ -13,6 +13,12 @@
 #define GUEST_VIRTIO_MMIO_SIZE  xen_mk_ullong(0x200)
 #define GUEST_VIRTIO_MMIO_SPI   33
 
+#ifndef container_of
+#define container_of(ptr, type, member) ({			\
+        typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+        (type *)( (char *)__mptr - offsetof(type,member) );})
+#endif
+
 static const char *gicv_to_string(libxl_gic_version gic_version)
 {
     switch (gic_version) {
@@ -44,14 +50,32 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
         vuart_enabled = true;
     }
 
-    /*
-     * XXX: Handle properly virtio
-     * A proper solution would be the toolstack to allocate the interrupts
-     * used by each virtio backend and let the backend now which one is used
-     */
     if (libxl_defbool_val(d_config->b_info.arch_arm.virtio)) {
-        nr_spis += (GUEST_VIRTIO_MMIO_SPI - 32) + 1;
+        uint64_t virtio_base;
+        libxl_device_virtio_disk *virtio_disk;
+
+        virtio_base = GUEST_VIRTIO_MMIO_BASE;
         virtio_irq = GUEST_VIRTIO_MMIO_SPI;
+
+        if (!d_config->num_virtio_disks) {
+            LOG(ERROR, "Virtio is enabled, but no Virtio devices present\n");
+            return ERROR_FAIL;
+        }
+        virtio_disk = &d_config->virtio_disks[0];
+
+        for (i = 0; i < virtio_disk->num_disks; i++) {
+            virtio_disk->disks[i].base = virtio_base;
+            virtio_disk->disks[i].irq = virtio_irq;
+
+            LOG(DEBUG, "Allocate Virtio MMIO params: IRQ %u BASE 0x%"PRIx64,
+                virtio_irq, virtio_base);
+
+            virtio_irq ++;
+            virtio_base += GUEST_VIRTIO_MMIO_SIZE;
+        }
+        virtio_irq --;
+
+        nr_spis += (virtio_irq - 32) + 1;
         virtio_enabled = true;
     }
 
@@ -75,8 +99,9 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
         }
 
         /* The same check as for vpl011 */
-        if (virtio_enabled && irq == virtio_irq) {
-            LOG(ERROR, "Physical IRQ %u conflicting with virtio SPI\n", irq);
+        if (virtio_enabled &&
+           (irq >= GUEST_VIRTIO_MMIO_SPI && irq <= virtio_irq)) {
+            LOG(ERROR, "Physical IRQ %u conflicting with Virtio IRQ range\n", irq);
             return ERROR_FAIL;
         }
 
@@ -680,7 +705,8 @@ static int make_vpl011_uart_node(libxl__gc *gc, void *fdt,
     return 0;
 }
 
-static int make_virtio_mmio_node(libxl__gc *gc, void *fdt)
+static int make_virtio_mmio_node(libxl__gc *gc, void *fdt,
+                                 uint64_t base, uint32_t irq)
 {
     int res;
     gic_interrupt intr;
@@ -693,10 +719,10 @@ static int make_virtio_mmio_node(libxl__gc *gc, void *fdt)
     if (res) return res;
 
     res = fdt_property_regs(gc, fdt, GUEST_ROOT_ADDRESS_CELLS, GUEST_ROOT_SIZE_CELLS,
-                            1, GUEST_VIRTIO_MMIO_BASE, GUEST_VIRTIO_MMIO_SIZE);
+                            1, base, GUEST_VIRTIO_MMIO_SIZE);
     if (res) return res;
 
-    set_interrupt(intr, GUEST_VIRTIO_MMIO_SPI, 0xf, DT_IRQ_TYPE_EDGE_RISING);
+    set_interrupt(intr, irq, 0xf, DT_IRQ_TYPE_EDGE_RISING);
     res = fdt_property_interrupts(gc, fdt, &intr, 1);
     if (res) return res;
 
@@ -1010,8 +1036,19 @@ next_resize:
         if (info->tee == LIBXL_TEE_TYPE_OPTEE)
             FDT( make_optee_node(gc, fdt) );
 
-        if (libxl_defbool_val(info->arch_arm.virtio))
-            FDT( make_virtio_mmio_node(gc, fdt) );
+        if (libxl_defbool_val(info->arch_arm.virtio)) {
+            libxl_domain_config *d_config =
+                container_of(info, libxl_domain_config, b_info);
+            libxl_device_virtio_disk *virtio_disk = &d_config->virtio_disks[0];
+            unsigned int i;
+
+            for (i = 0; i < virtio_disk->num_disks; i++) {
+                uint64_t base = virtio_disk->disks[i].base;
+                uint32_t irq = virtio_disk->disks[i].irq;
+
+                FDT( make_virtio_mmio_node(gc, fdt, base, irq) );
+            }
+        }
 
         if (pfdt)
             FDT( copy_partial_fdt(gc, fdt, pfdt) );
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 2814818..8a0651e 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -1817,6 +1817,7 @@ const libxl__device_type *device_type_tbl[] = {
     &libxl__dtdev_devtype,
     &libxl__vdispl_devtype,
     &libxl__vsnd_devtype,
+    &libxl__virtio_disk_devtype,
     NULL
 };
 
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 94a2317..4e2024d 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3988,6 +3988,7 @@ extern const libxl__device_type libxl__vdispl_devtype;
 extern const libxl__device_type libxl__p9_devtype;
 extern const libxl__device_type libxl__pvcallsif_devtype;
 extern const libxl__device_type libxl__vsnd_devtype;
+extern const libxl__device_type libxl__virtio_disk_devtype;
 
 extern const libxl__device_type *device_type_tbl[];
 
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index b054bf9..5f8a3ff 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -935,6 +935,20 @@ libxl_device_vsnd = Struct("device_vsnd", [
     ("pcms", Array(libxl_vsnd_pcm, "num_vsnd_pcms"))
     ])
 
+libxl_virtio_disk_param = Struct("virtio_disk_param", [
+    ("filename", string),
+    ("readonly", bool),
+    ("irq", uint32),
+    ("base", uint64),
+    ])
+
+libxl_device_virtio_disk = Struct("device_virtio_disk", [
+    ("backend_domid", libxl_domid),
+    ("backend_domname", string),
+    ("devid", libxl_devid),
+    ("disks", Array(libxl_virtio_disk_param, "num_disks")),
+    ])
+
 libxl_domain_config = Struct("domain_config", [
     ("c_info", libxl_domain_create_info),
     ("b_info", libxl_domain_build_info),
@@ -951,6 +965,7 @@ libxl_domain_config = Struct("domain_config", [
     ("pvcallsifs", Array(libxl_device_pvcallsif, "num_pvcallsifs")),
     ("vdispls", Array(libxl_device_vdispl, "num_vdispls")),
     ("vsnds", Array(libxl_device_vsnd, "num_vsnds")),
+    ("virtio_disks", Array(libxl_device_virtio_disk, "num_virtio_disks")),
     # a channel manifests as a console with a name,
     # see docs/misc/channels.txt
     ("channels", Array(libxl_device_channel, "num_channels")),
diff --git a/tools/libxl/libxl_types_internal.idl b/tools/libxl/libxl_types_internal.idl
index 3593e21..8f71980 100644
--- a/tools/libxl/libxl_types_internal.idl
+++ b/tools/libxl/libxl_types_internal.idl
@@ -32,6 +32,7 @@ libxl__device_kind = Enumeration("device_kind", [
     (14, "PVCALLS"),
     (15, "VSND"),
     (16, "VINPUT"),
+    (17, "VIRTIO_DISK"),
     ])
 
 libxl__console_backend = Enumeration("console_backend", [
diff --git a/tools/libxl/libxl_virtio_disk.c b/tools/libxl/libxl_virtio_disk.c
new file mode 100644
index 0000000..25e7f1a
--- /dev/null
+++ b/tools/libxl/libxl_virtio_disk.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2020 EPAM Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_internal.h"
+
+static int libxl__device_virtio_disk_setdefault(libxl__gc *gc, uint32_t domid,
+                                                libxl_device_virtio_disk *virtio_disk,
+                                                bool hotplug)
+{
+    return libxl__resolve_domid(gc, virtio_disk->backend_domname,
+                                &virtio_disk->backend_domid);
+}
+
+static int libxl__virtio_disk_from_xenstore(libxl__gc *gc, const char *libxl_path,
+                                            libxl_devid devid,
+                                            libxl_device_virtio_disk *virtio_disk)
+{
+    const char *be_path;
+    int rc;
+
+    virtio_disk->devid = devid;
+    rc = libxl__xs_read_mandatory(gc, XBT_NULL,
+                                  GCSPRINTF("%s/backend", libxl_path),
+                                  &be_path);
+    if (rc) return rc;
+
+    rc = libxl__backendpath_parse_domid(gc, be_path, &virtio_disk->backend_domid);
+    if (rc) return rc;
+
+    return 0;
+}
+
+static void libxl__update_config_virtio_disk(libxl__gc *gc,
+                                             libxl_device_virtio_disk *dst,
+                                             libxl_device_virtio_disk *src)
+{
+    dst->devid = src->devid;
+}
+
+static int libxl_device_virtio_disk_compare(libxl_device_virtio_disk *d1,
+                                            libxl_device_virtio_disk *d2)
+{
+    return COMPARE_DEVID(d1, d2);
+}
+
+static void libxl__device_virtio_disk_add(libxl__egc *egc, uint32_t domid,
+                                          libxl_device_virtio_disk *virtio_disk,
+                                          libxl__ao_device *aodev)
+{
+    libxl__device_add_async(egc, domid, &libxl__virtio_disk_devtype, virtio_disk, aodev);
+}
+
+static int libxl__set_xenstore_virtio_disk(libxl__gc *gc, uint32_t domid,
+                                           libxl_device_virtio_disk *virtio_disk,
+                                           flexarray_t *back, flexarray_t *front,
+                                           flexarray_t *ro_front)
+{
+    int rc;
+    unsigned int i;
+
+    for (i = 0; i < virtio_disk->num_disks; i++) {
+        rc = flexarray_append_pair(ro_front, GCSPRINTF("%d/filename", i),
+                                   GCSPRINTF("%s", virtio_disk->disks[i].filename));
+        if (rc) return rc;
+
+        rc = flexarray_append_pair(ro_front, GCSPRINTF("%d/readonly", i),
+                                   GCSPRINTF("%d", virtio_disk->disks[i].readonly));
+        if (rc) return rc;
+
+        rc = flexarray_append_pair(ro_front, GCSPRINTF("%d/base", i),
+                                   GCSPRINTF("%lu", virtio_disk->disks[i].base));
+        if (rc) return rc;
+
+        rc = flexarray_append_pair(ro_front, GCSPRINTF("%d/irq", i),
+                                   GCSPRINTF("%u", virtio_disk->disks[i].irq));
+        if (rc) return rc;
+    }
+
+    return 0;
+}
+
+static LIBXL_DEFINE_UPDATE_DEVID(virtio_disk)
+static LIBXL_DEFINE_DEVICE_FROM_TYPE(virtio_disk)
+static LIBXL_DEFINE_DEVICES_ADD(virtio_disk)
+
+DEFINE_DEVICE_TYPE_STRUCT(virtio_disk, VIRTIO_DISK,
+    .update_config = (device_update_config_fn_t) libxl__update_config_virtio_disk,
+    .from_xenstore = (device_from_xenstore_fn_t) libxl__virtio_disk_from_xenstore,
+    .set_xenstore_config = (device_set_xenstore_config_fn_t) libxl__set_xenstore_virtio_disk
+);
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/tools/xl/Makefile b/tools/xl/Makefile
index af4912e..38e4701 100644
--- a/tools/xl/Makefile
+++ b/tools/xl/Makefile
@@ -22,7 +22,7 @@ XL_OBJS += xl_vtpm.o xl_block.o xl_nic.o xl_usb.o
 XL_OBJS += xl_sched.o xl_pci.o xl_vcpu.o xl_cdrom.o xl_mem.o
 XL_OBJS += xl_info.o xl_console.o xl_misc.o
 XL_OBJS += xl_vmcontrol.o xl_saverestore.o xl_migrate.o
-XL_OBJS += xl_vdispl.o xl_vsnd.o xl_vkb.o
+XL_OBJS += xl_vdispl.o xl_vsnd.o xl_vkb.o xl_virtio_disk.o
 
 $(XL_OBJS): CFLAGS += $(CFLAGS_libxentoollog)
 $(XL_OBJS): CFLAGS += $(CFLAGS_XL)
diff --git a/tools/xl/xl.h b/tools/xl/xl.h
index 06569c6..3d26f19 100644
--- a/tools/xl/xl.h
+++ b/tools/xl/xl.h
@@ -178,6 +178,9 @@ int main_vsnddetach(int argc, char **argv);
 int main_vkbattach(int argc, char **argv);
 int main_vkblist(int argc, char **argv);
 int main_vkbdetach(int argc, char **argv);
+int main_virtio_diskattach(int argc, char **argv);
+int main_virtio_disklist(int argc, char **argv);
+int main_virtio_diskdetach(int argc, char **argv);
 int main_usbctrl_attach(int argc, char **argv);
 int main_usbctrl_detach(int argc, char **argv);
 int main_usbdev_attach(int argc, char **argv);
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index 0833539..2bdf0b7 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -434,6 +434,21 @@ struct cmd_spec cmd_table[] = {
       "Destroy a domain's virtual sound device",
       "<Domain> <DevId>",
     },
+    { "virtio-disk-attach",
+      &main_virtio_diskattach, 1, 1,
+      "Create a new virtio block device",
+      " TBD\n"
+    },
+    { "virtio-disk-list",
+      &main_virtio_disklist, 0, 0,
+      "List virtio block devices for a domain",
+      "<Domain(s)>",
+    },
+    { "virtio-disk-detach",
+      &main_virtio_diskdetach, 0, 1,
+      "Destroy a domain's virtio block device",
+      "<Domain> <DevId>",
+    },
     { "uptime",
       &main_uptime, 0, 0,
       "Print uptime for all/some domains",
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index b8306aa..fd72109 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -1202,6 +1202,120 @@ out:
     if (rc) exit(EXIT_FAILURE);
 }
 
+#define MAX_VIRTIO_DISKS 4
+
+static int parse_virtio_disk_config(libxl_device_virtio_disk *virtio_disk, char *token)
+{
+    char *oparg;
+    libxl_string_list disks = NULL;
+    int i, rc;
+
+    if (MATCH_OPTION("backend", token, oparg)) {
+        virtio_disk->backend_domname = strdup(oparg);
+    } else if (MATCH_OPTION("disks", token, oparg)) {
+        split_string_into_string_list(oparg, ";", &disks);
+
+        virtio_disk->num_disks = libxl_string_list_length(&disks);
+        if (virtio_disk->num_disks > MAX_VIRTIO_DISKS) {
+            fprintf(stderr, "vdisk: currently only %d disks are supported",
+                    MAX_VIRTIO_DISKS);
+            return 1;
+        }
+        virtio_disk->disks = xcalloc(virtio_disk->num_disks,
+                                     sizeof(*virtio_disk->disks));
+
+        for(i = 0; i < virtio_disk->num_disks; i++) {
+            char *disk_opt;
+
+            rc = split_string_into_pair(disks[i], ":", &disk_opt,
+                                        &virtio_disk->disks[i].filename);
+            if (rc) {
+                fprintf(stderr, "vdisk: failed to split \"%s\" into pair\n",
+                        disks[i]);
+                goto out;
+            }
+
+            if (!strcmp(disk_opt, "ro"))
+                virtio_disk->disks[i].readonly = 1;
+            else if (!strcmp(disk_opt, "rw"))
+                virtio_disk->disks[i].readonly = 0;
+            else {
+                fprintf(stderr, "vdisk: failed to parse \"%s\" disk option\n",
+                        disk_opt);
+                rc = 1;
+            }
+            free(disk_opt);
+
+            if (rc) goto out;
+        }
+    } else {
+        fprintf(stderr, "Unknown string \"%s\" in vdisk spec\n", token);
+        rc = 1; goto out;
+    }
+
+    rc = 0;
+
+out:
+    libxl_string_list_dispose(&disks);
+    return rc;
+}
+
+static void parse_virtio_disk_list(const XLU_Config *config,
+                            libxl_domain_config *d_config)
+{
+    XLU_ConfigList *virtio_disks;
+    const char *item;
+    char *buf = NULL;
+    int rc;
+
+    if (!xlu_cfg_get_list (config, "vdisk", &virtio_disks, 0, 0)) {
+        libxl_domain_build_info *b_info = &d_config->b_info;
+        int entry = 0;
+
+        /* XXX Remove an extra property */
+        libxl_defbool_setdefault(&b_info->arch_arm.virtio, false);
+        if (!libxl_defbool_val(b_info->arch_arm.virtio)) {
+            fprintf(stderr, "Virtio device requires Virtio property to be set\n");
+            exit(EXIT_FAILURE);
+        }
+
+        while ((item = xlu_cfg_get_listitem(virtio_disks, entry)) != NULL) {
+            libxl_device_virtio_disk *virtio_disk;
+            char *p;
+
+            virtio_disk = ARRAY_EXTEND_INIT(d_config->virtio_disks,
+                                            d_config->num_virtio_disks,
+                                            libxl_device_virtio_disk_init);
+
+            buf = strdup(item);
+
+            p = strtok (buf, ",");
+            while (p != NULL)
+            {
+                while (*p == ' ') p++;
+
+                rc = parse_virtio_disk_config(virtio_disk, p);
+                if (rc) goto out;
+
+                p = strtok (NULL, ",");
+            }
+
+            entry++;
+
+            if (virtio_disk->num_disks == 0) {
+                fprintf(stderr, "At least one virtio disk should be specified\n");
+                rc = 1; goto out;
+            }
+        }
+    }
+
+    rc = 0;
+
+out:
+    free(buf);
+    if (rc) exit(EXIT_FAILURE);
+}
+
 void parse_config_data(const char *config_source,
                        const char *config_data,
                        int config_len,
@@ -2732,6 +2846,7 @@ skip_usbdev:
     }
 
     parse_vkb_list(config, d_config);
+    parse_virtio_disk_list(config, d_config);
 
     xlu_cfg_get_defbool(config, "xend_suspend_evtchn_compat",
                         &c_info->xend_suspend_evtchn_compat, 0);
diff --git a/tools/xl/xl_virtio_disk.c b/tools/xl/xl_virtio_disk.c
new file mode 100644
index 0000000..808a7da
--- /dev/null
+++ b/tools/xl/xl_virtio_disk.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2020 EPAM Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include <stdlib.h>
+
+#include <libxl.h>
+#include <libxl_utils.h>
+#include <libxlutil.h>
+
+#include "xl.h"
+#include "xl_utils.h"
+#include "xl_parse.h"
+
+int main_virtio_diskattach(int argc, char **argv)
+{
+    return 0;
+}
+
+int main_virtio_disklist(int argc, char **argv)
+{
+   return 0;
+}
+
+int main_virtio_diskdetach(int argc, char **argv)
+{
+    return 0;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
2.7.4



  parent reply	other threads:[~2020-08-03 18:31 UTC|newest]

Thread overview: 140+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-03 18:21 [RFC PATCH V1 00/12] IOREQ feature (+ virtio-mmio) on Arm Oleksandr Tyshchenko
2020-08-03 18:21 ` [RFC PATCH V1 01/12] hvm/ioreq: Make x86's IOREQ feature common Oleksandr Tyshchenko
2020-08-04  7:45   ` Paul Durrant
2020-08-04 11:10     ` Oleksandr
2020-08-04 11:23       ` Paul Durrant
2020-08-04 11:51         ` Oleksandr
2020-08-04 13:18           ` Paul Durrant
2020-08-04 13:52       ` Julien Grall
2020-08-04 15:41         ` Jan Beulich
2020-08-04 19:11         ` Stefano Stabellini
2020-08-05  7:01           ` Jan Beulich
2020-08-06  0:37             ` Stefano Stabellini
2020-08-06  6:59               ` Jan Beulich
2020-08-06 20:32                 ` Stefano Stabellini
2020-08-07 13:19                   ` Oleksandr
2020-08-07 16:45               ` Oleksandr
2020-08-07 21:50                 ` Stefano Stabellini
2020-08-07 22:19                   ` Oleksandr
2020-08-10 13:41                     ` Oleksandr
2020-08-10 23:34                       ` Stefano Stabellini
2020-08-11  9:19                         ` Julien Grall
2020-08-11 10:10                           ` Oleksandr
2020-08-11 22:47                             ` Stefano Stabellini
2020-08-12 14:35                               ` Oleksandr
2020-08-12 23:08                                 ` Stefano Stabellini
2020-08-13 20:16                                   ` Julien Grall
2020-08-07 23:45                   ` Oleksandr
2020-08-10 23:34                     ` Stefano Stabellini
2020-08-05  8:33           ` Julien Grall
2020-08-06  0:37             ` Stefano Stabellini
2020-08-06  9:45               ` Julien Grall
2020-08-06 23:48                 ` Stefano Stabellini
2020-08-10 19:20                   ` Julien Grall
2020-08-10 23:34                     ` Stefano Stabellini
2020-08-11 11:28                       ` Julien Grall
2020-08-11 22:48                         ` Stefano Stabellini
2020-08-12  8:19                           ` Julien Grall
2020-08-20 19:14                             ` Oleksandr
2020-08-21  0:53                               ` Stefano Stabellini
2020-08-21 18:54                                 ` Julien Grall
2020-08-05 13:30   ` Julien Grall
2020-08-06 11:37     ` Oleksandr
2020-08-10 16:29       ` Julien Grall
2020-08-10 17:28         ` Oleksandr
2020-08-05 16:15   ` Andrew Cooper
2020-08-06  8:20     ` Oleksandr
2020-08-15 17:30   ` Julien Grall
2020-08-16 19:37     ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 02/12] hvm/dm: Make x86's DM " Oleksandr Tyshchenko
2020-08-03 18:21 ` [RFC PATCH V1 03/12] xen/mm: Make x86's XENMEM_resource_ioreq_server handling common Oleksandr Tyshchenko
2020-08-03 18:21 ` [RFC PATCH V1 04/12] xen/arm: Introduce arch specific bits for IOREQ/DM features Oleksandr Tyshchenko
2020-08-04  7:49   ` Paul Durrant
2020-08-04 14:01     ` Julien Grall
2020-08-04 23:22       ` Stefano Stabellini
2020-08-15 17:56       ` Julien Grall
2020-08-17 14:36         ` Oleksandr
2020-08-04 23:22   ` Stefano Stabellini
2020-08-05  7:05     ` Jan Beulich
2020-08-05 16:41       ` Stefano Stabellini
2020-08-05 19:45         ` Oleksandr
2020-08-05  9:32     ` Julien Grall
2020-08-05 15:41       ` Oleksandr
2020-08-06 10:19         ` Julien Grall
2020-08-10 18:09       ` Oleksandr
2020-08-10 18:21         ` Oleksandr
2020-08-10 19:00         ` Julien Grall
2020-08-10 20:29           ` Oleksandr
2020-08-10 22:37             ` Julien Grall
2020-08-11  6:13               ` Oleksandr
2020-08-12 15:08                 ` Oleksandr
2020-08-11 17:09       ` Oleksandr
2020-08-11 17:50         ` Julien Grall
2020-08-13 18:41           ` Oleksandr
2020-08-13 20:36             ` Julien Grall
2020-08-13 21:49               ` Oleksandr
2020-08-13 20:39             ` Oleksandr Tyshchenko
2020-08-13 22:14               ` Julien Grall
2020-08-14 12:08                 ` Oleksandr
2020-08-05 14:12   ` Julien Grall
2020-08-05 14:45     ` Jan Beulich
2020-08-05 19:30     ` Oleksandr
2020-08-06 11:08       ` Julien Grall
2020-08-06 11:29         ` Jan Beulich
2020-08-20 18:30           ` Oleksandr
2020-08-21  6:16             ` Jan Beulich
2020-08-21 11:13               ` Oleksandr
2020-08-06 13:27         ` Oleksandr
2020-08-10 18:25           ` Julien Grall
2020-08-10 19:58             ` Oleksandr
2020-08-05 16:13   ` Jan Beulich
2020-08-05 19:47     ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 05/12] hvm/dm: Introduce xendevicemodel_set_irq_level DM op Oleksandr Tyshchenko
2020-08-04 23:22   ` Stefano Stabellini
2020-08-05  9:39     ` Julien Grall
2020-08-06  0:37       ` Stefano Stabellini
2020-08-06 11:32         ` Julien Grall
2020-08-06 23:49           ` Stefano Stabellini
2020-08-07  8:43             ` Jan Beulich
2020-08-07 21:50               ` Stefano Stabellini
2020-08-08  9:27                 ` Julien Grall
2020-08-08  9:28                   ` Julien Grall
2020-08-10 23:34                   ` Stefano Stabellini
2020-08-11 13:04                     ` Julien Grall
2020-08-11 22:48                       ` Stefano Stabellini
2020-08-18  9:31                         ` Julien Grall
2020-08-21  0:53                           ` Stefano Stabellini
2020-08-17 15:23                 ` Jan Beulich
2020-08-17 22:56                   ` Stefano Stabellini
2020-08-18  8:03                     ` Jan Beulich
2020-08-05 16:15   ` Jan Beulich
2020-08-05 22:12     ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 06/12] libxl: Introduce basic virtio-mmio support on Arm Oleksandr Tyshchenko
2020-08-03 18:21 ` [RFC PATCH V1 07/12] A collection of tweaks to be able to run emulator in driver domain Oleksandr Tyshchenko
2020-08-05 16:19   ` Jan Beulich
2020-08-05 16:40     ` Paul Durrant
2020-08-06  9:22       ` Oleksandr
2020-08-06  9:27         ` Jan Beulich
2020-08-14 16:30           ` Oleksandr
2020-08-16 15:36             ` Julien Grall
2020-08-17 15:07               ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 08/12] xen/arm: Invalidate qemu mapcache on XENMEM_decrease_reservation Oleksandr Tyshchenko
2020-08-05 16:21   ` Jan Beulich
2020-08-06 11:35     ` Julien Grall
2020-08-06 11:50       ` Jan Beulich
2020-08-06 14:28         ` Oleksandr
2020-08-06 16:33           ` Jan Beulich
2020-08-06 16:57             ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 09/12] libxl: Handle virtio-mmio irq in more correct way Oleksandr Tyshchenko
2020-08-04 23:22   ` Stefano Stabellini
2020-08-05 20:51     ` Oleksandr
2020-08-03 18:21 ` Oleksandr Tyshchenko [this message]
2020-08-04 23:23   ` [RFC PATCH V1 10/12] libxl: Add support for virtio-disk configuration Stefano Stabellini
2020-08-05 21:12     ` Oleksandr
2020-08-06  0:37       ` Stefano Stabellini
2020-08-03 18:21 ` [RFC PATCH V1 11/12] libxl: Insert "dma-coherent" property into virtio-mmio device node Oleksandr Tyshchenko
2020-08-04 23:23   ` Stefano Stabellini
2020-08-05 20:35     ` Oleksandr
2020-08-03 18:21 ` [RFC PATCH V1 12/12] libxl: Fix duplicate memory node in DT Oleksandr Tyshchenko
2020-08-15 17:24 ` [RFC PATCH V1 00/12] IOREQ feature (+ virtio-mmio) on Arm Julien Grall
2020-08-16 19:34   ` Oleksandr

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1596478888-23030-11-git-send-email-olekstysh@gmail.com \
    --to=olekstysh@gmail.com \
    --cc=anthony.perard@citrix.com \
    --cc=ian.jackson@eu.citrix.com \
    --cc=julien@xen.org \
    --cc=oleksandr_tyshchenko@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).