xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Julien Grall <julien.grall@arm.com>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
	Stefano Stabellini <sstabellini@kernel.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used
Date: Mon, 12 Aug 2019 18:29:53 +0100	[thread overview]
Message-ID: <20190812173019.11956-3-julien.grall@arm.com> (raw)
In-Reply-To: <20190812173019.11956-1-julien.grall@arm.com>

The 1:1 mapping may clash with other parts of the Xen virtual memory
layout. At the moment, Xen is handling the clash by only creating a
mapping to the runtime virtual address before enabling the MMU.

The rest of the mappings (such as the fixmap) will be mapped after the
MMU is enabled. However, the code doing the mapping is not safe as it
replace mapping without using the Break-Before-Make sequence.

As the 1:1 mapping can be anywhere in the memory, it is easier to remove
all the entries added as soon as the 1:1 mapping is not used rather than
adding the Break-Before-Make sequence everywhere.

It is difficult to track where exactly the 1:1 mapping was created
without a full rework of create_page_tables(). Instead, introduce a new
function remove_identity_mapping() will look where is the top-level entry
for the 1:1 mapping and remove it.

The new function is only called for the boot CPU. Secondary CPUs will
switch directly to the runtime page-tables so there are no need to
remove the 1:1 mapping. Note that this still doesn't make the Secondary
CPUs path safe but it is not making it worst.

Signed-off-by: Julien Grall <julien.grall@arm.com>

---
    It is very likely we will need to re-introduce the 1:1 mapping to cater
    secondary CPUs boot and suspend/resume. For now, the attempt is to make
    boot CPU path fully Arm Arm compliant.

    Changes in v3:
        - Avoid hardcoding slots

    Changes in v2:
        - s/ID map/1:1 mapping/
        - Rename remove_id_map() to remove_identity_mapping()
        - Add missing signed-off-by
---
 xen/arch/arm/arm64/head.S | 94 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 79 insertions(+), 15 deletions(-)

diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 50cff08756..ec138aae3e 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -33,6 +33,11 @@
 #define PT_DEV    0xe71 /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=100 T=0 P=1 */
 #define PT_DEV_L3 0xe73 /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=100 T=1 P=1 */
 
+/* Convenience defines to get slot used by Xen mapping. */
+#define XEN_ZEROETH_SLOT    zeroeth_table_offset(XEN_VIRT_START)
+#define XEN_FIRST_SLOT      first_table_offset(XEN_VIRT_START)
+#define XEN_SECOND_SLOT     second_table_offset(XEN_VIRT_START)
+
 #define __HEAD_FLAG_PAGE_SIZE   ((PAGE_SHIFT - 10) / 2)
 
 #define __HEAD_FLAG_PHYS_BASE   1
@@ -301,6 +306,13 @@ real_start_efi:
         ldr   x0, =primary_switched
         br    x0
 primary_switched:
+        /*
+         * The 1:1 map may clash with other parts of the Xen virtual memory
+         * layout. As it is not used anymore, remove it completely to
+         * avoid having to worry about replacing existing mapping
+         * afterwards.
+         */
+        bl    remove_identity_mapping
         bl    setup_fixmap
 #ifdef CONFIG_EARLY_PRINTK
         /* Use a virtual address to access the UART. */
@@ -626,10 +638,71 @@ enable_mmu:
         ret
 ENDPROC(enable_mmu)
 
+/*
+ * Remove the 1:1 map for the page-tables. It is not easy to keep track
+ * where the 1:1 map was mapped, so we will look for the top-level entry
+ * exclusive to the 1:1 map and remove it.
+ *
+ * Inputs:
+ *   x19: paddr(start)
+ *
+ * Clobbers x0 - x1
+ */
+remove_identity_mapping:
+        /*
+         * Find the zeroeth slot used. Remove the entry from zeroeth
+         * table if the slot is not XEN_ZEROETH_SLOT. For slot
+         * XEN_ZEROETH_SLOT, the 1:1 mapping was either done in first
+         * or second table.
+         */
+        lsr   x1, x19, #ZEROETH_SHIFT   /* x1 := zeroeth slot */
+        cmp   x1, #XEN_ZEROETH_SLOT
+        beq   1f
+        /* It is not in slot XEN_ZEROETH_SLOT, remove the entry. */
+        ldr   x0, =boot_pgtable         /* x0 := root table */
+        str   xzr, [x0, x1, lsl #3]
+        b     identity_mapping_removed
+
+1:
+        /*
+         * Find the first slot used. Remove the entry for the first
+         * table if the slot is not XEN_FIRST_SLOT. For slot XEN_FIRST_SLOT,
+         * the 1:1 mapping was done in the second table.
+         */
+        lsr   x1, x19, #FIRST_SHIFT
+        and   x1, x1, #LPAE_ENTRY_MASK  /* x1 := first slot */
+        cmp   x1, #XEN_FIRST_SLOT
+        beq   1f
+        /* It is not in slot XEN_FIRST_SLOT, remove the entry. */
+        ldr   x0, =boot_first           /* x0 := first table */
+        str   xzr, [x0, x1, lsl #3]
+        b     identity_mapping_removed
+
+1:
+        /*
+         * Find the second slot used. Remove the entry for the first
+         * table if the slot is not XEN_SECOND_SLOT. For slot XEN_SECOND_SLOT,
+         * it means the 1:1 mapping was not created.
+         */
+        lsr   x1, x19, #SECOND_SHIFT
+        and   x1, x1, #LPAE_ENTRY_MASK  /* x1 := first slot */
+        cmp   x1, #XEN_SECOND_SLOT
+        beq   identity_mapping_removed
+        /* It is not in slot 1, remove the entry */
+        ldr   x0, =boot_second          /* x0 := second table */
+        str   xzr, [x0, x1, lsl #3]
+
+identity_mapping_removed:
+        /* See asm-arm/arm64/flushtlb.h for the explanation of the sequence. */
+        dsb   nshst
+        tlbi  alle2
+        dsb   nsh
+        isb
+
+        ret
+ENDPROC(remove_identity_mapping)
+
 setup_fixmap:
-        /* Now we can install the fixmap and dtb mappings, since we
-         * don't need the 1:1 map any more */
-        dsb   sy
 #if defined(CONFIG_EARLY_PRINTK) /* Fixmap is only used by early printk */
         /* Add UART to the fixmap table */
         ldr   x1, =xen_fixmap        /* x1 := vaddr (xen_fixmap) */
@@ -647,19 +720,10 @@ setup_fixmap:
         ldr   x1, =FIXMAP_ADDR(0)
         lsr   x1, x1, #(SECOND_SHIFT - 3)   /* x1 := Slot for FIXMAP(0) */
         str   x2, [x4, x1]           /* Map it in the fixmap's slot */
-#endif
 
-        /*
-         * Flush the TLB in case the 1:1 mapping happens to clash with
-         * the virtual addresses used by the fixmap or DTB.
-         */
-        dsb   sy                     /* Ensure any page table updates made above
-                                      * have occurred. */
-
-        isb
-        tlbi  alle2
-        dsb   sy                     /* Ensure completion of TLB flush */
-        isb
+        /* Ensure any page table updates made above have occurred. */
+        dsb   nshst
+#endif
         ret
 ENDPROC(setup_fixmap)
 
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2019-08-12 17:30 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 17:29 [Xen-devel] [PATCH v3 00/28] xen/arm: Rework head.S to make it more compliant with the Arm Arm Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 01/28] xen/arm: lpae: Allow more LPAE helpers to be used in assembly Julien Grall
2019-08-22 17:07   ` Stefano Stabellini
2019-08-12 17:29 ` Julien Grall [this message]
2019-08-22 17:58   ` [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used Stefano Stabellini
2019-08-22 18:25     ` Julien Grall
2019-08-22 18:29       ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 03/28] xen/arm64: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 04/28] xen/arm64: head: Rework and document launch() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 05/28] xen/arm64: head: Setup TTBR_EL2 in enable_mmu() and add missing isb Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 07/28] xen/arm64: head: Fix typo in the documentation on top of init_uart() Julien Grall
2019-08-22 17:08   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 08/28] xen/arm32: head: Add a macro to move an immediate constant into a 32-bit register Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 09/28] xen/arm32: head: Mark the end of subroutines with ENDPROC Julien Grall
2019-08-12 17:33   ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 10/28] xen/arm32: head: Don't clobber r14/lr in the macro PRINT Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 11/28] xen/arm32: head: Rework UART initialization on boot CPU Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 12/28] xen/arm32: head: Introduce print_reg Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 13/28] xen/arm32: head: Introduce distinct paths for the boot CPU and secondary CPUs Julien Grall
2019-08-22 17:11   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 14/28] xen/arm32: head: Rework and document check_cpu_mode() Julien Grall
2019-08-22 17:14   ` Stefano Stabellini
2019-09-07 10:35     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 15/28] xen/arm32: head: Rework and document zero_bss() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 16/28] xen/arm32: head: Document create_pages_tables() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 17/28] xen/arm32: head: Document enable_mmu() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path Julien Grall
2019-08-22 17:17   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 19/28] xen/arm32: head: Don't setup the fixmap on secondary CPUs Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 20/28] xen/arm32: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 18:17   ` Stefano Stabellini
2019-08-22 18:31     ` Julien Grall
2019-08-22 22:53       ` Stefano Stabellini
2019-08-22 23:39         ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 21/28] xen/arm32: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 22/28] xen/arm32: head: Rework and document launch() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb Julien Grall
2019-08-22 17:15   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 24/28] xen/arm: Zero BSS after the MMU and D-cache is turned on Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 25/28] xen/arm64: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-22 23:31   ` Stefano Stabellini
2019-08-22 23:44     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 26/28] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
2019-08-24  1:16   ` Stefano Stabellini
2019-09-17 17:53     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 27/28] xen/arm32: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-23  1:10   ` Stefano Stabellini
2019-08-23  9:40     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 28/28] xen/arm32: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812173019.11956-3-julien.grall@arm.com \
    --to=julien.grall@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).