xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: Julien Grall <julien.grall@arm.com>
Cc: xen-devel@lists.xenproject.org,
	Stefano Stabellini <sstabellini@kernel.org>,
	Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Subject: Re: [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb
Date: Thu, 22 Aug 2019 10:15:39 -0700 (PDT)	[thread overview]
Message-ID: <alpine.DEB.2.21.1908221015310.22783@sstabellini-ThinkPad-T480s> (raw)
In-Reply-To: <20190812173019.11956-24-julien.grall@arm.com>

On Mon, 12 Aug 2019, Julien Grall wrote:
> At the moment, HTTBR is setup in create_page_tables(). This is fine as
> it is called by every CPUs.
> 
> However, such assumption may not hold in the future. To make change
> easier, the HTTBR is not setup in enable_mmu().
> 
> Take the opportunity to add the missing isb() to ensure the HTTBR is
> seen before the MMU is turned on.
> 
> Lastly, the only use of r5 in create_page_tables() is now removed. So
> the register can be removed from the clobber list of the function.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>

Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>


> ---
>     Changes in v3:
>         - Move the comment in the correct place
>         - r5 is not cloberred anymore
> 
>     Changes in v2:
>         - Patch added
> ---
>  xen/arch/arm/arm32/head.S | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
> index 3c18037575..2317fb8855 100644
> --- a/xen/arch/arm/arm32/head.S
> +++ b/xen/arch/arm/arm32/head.S
> @@ -359,7 +359,7 @@ ENDPROC(cpu_init)
>   *   r9 : paddr(start)
>   *   r10: phys offset
>   *
> - * Clobbers r0 - r6
> + * Clobbers r0 - r4, r6
>   *
>   * Register usage within this function:
>   *   r6 : Identity map in place
> @@ -374,11 +374,8 @@ create_page_tables:
>          moveq r6, #1                 /* r6 := identity map now in place */
>          movne r6, #0                 /* r6 := identity map not yet in place */
>  
> -        /* Write Xen's PT's paddr into the HTTBR */
>          ldr   r4, =boot_pgtable
>          add   r4, r4, r10            /* r4 := paddr (boot_pagetable) */
> -        mov   r5, #0                 /* r4:r5 is paddr (boot_pagetable) */
> -        mcrr  CP64(r4, r5, HTTBR)
>  
>          /* Setup boot_pgtable: */
>          ldr   r1, =boot_second
> @@ -484,6 +481,13 @@ enable_mmu:
>          mcr   CP32(r0, TLBIALLH)     /* Flush hypervisor TLBs */
>          dsb   nsh
>  
> +        /* Write Xen's PT's paddr into the HTTBR */
> +        ldr   r0, =boot_pgtable
> +        add   r0, r0, r10            /* r0 := paddr (boot_pagetable) */
> +        mov   r1, #0                 /* r0:r1 is paddr (boot_pagetable) */
> +        mcrr  CP64(r0, r1, HTTBR)
> +        isb
> +
>          mrc   CP32(r0, HSCTLR)
>          /* Enable MMU and D-cache */
>          orr   r0, r0, #(SCTLR_Axx_ELx_M|SCTLR_Axx_ELx_C)
> -- 
> 2.11.0
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  reply	other threads:[~2019-08-22 17:15 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 17:29 [Xen-devel] [PATCH v3 00/28] xen/arm: Rework head.S to make it more compliant with the Arm Arm Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 01/28] xen/arm: lpae: Allow more LPAE helpers to be used in assembly Julien Grall
2019-08-22 17:07   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 02/28] xen/arm64: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 17:58   ` Stefano Stabellini
2019-08-22 18:25     ` Julien Grall
2019-08-22 18:29       ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 03/28] xen/arm64: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 04/28] xen/arm64: head: Rework and document launch() Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 05/28] xen/arm64: head: Setup TTBR_EL2 in enable_mmu() and add missing isb Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 06/28] xen/arm64: head: Introduce a macro to get a PC-relative address of a symbol Julien Grall
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 07/28] xen/arm64: head: Fix typo in the documentation on top of init_uart() Julien Grall
2019-08-22 17:08   ` Stefano Stabellini
2019-08-12 17:29 ` [Xen-devel] [PATCH v3 08/28] xen/arm32: head: Add a macro to move an immediate constant into a 32-bit register Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 09/28] xen/arm32: head: Mark the end of subroutines with ENDPROC Julien Grall
2019-08-12 17:33   ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 10/28] xen/arm32: head: Don't clobber r14/lr in the macro PRINT Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 11/28] xen/arm32: head: Rework UART initialization on boot CPU Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 12/28] xen/arm32: head: Introduce print_reg Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 13/28] xen/arm32: head: Introduce distinct paths for the boot CPU and secondary CPUs Julien Grall
2019-08-22 17:11   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 14/28] xen/arm32: head: Rework and document check_cpu_mode() Julien Grall
2019-08-22 17:14   ` Stefano Stabellini
2019-09-07 10:35     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 15/28] xen/arm32: head: Rework and document zero_bss() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 16/28] xen/arm32: head: Document create_pages_tables() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 17/28] xen/arm32: head: Document enable_mmu() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 18/28] xen/arm32: head: Move assembly switch to the runtime PT in secondary CPUs path Julien Grall
2019-08-22 17:17   ` Stefano Stabellini
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 19/28] xen/arm32: head: Don't setup the fixmap on secondary CPUs Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 20/28] xen/arm32: head: Remove 1:1 mapping as soon as it is not used Julien Grall
2019-08-22 18:17   ` Stefano Stabellini
2019-08-22 18:31     ` Julien Grall
2019-08-22 22:53       ` Stefano Stabellini
2019-08-22 23:39         ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 21/28] xen/arm32: head: Rework and document setup_fixmap() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 22/28] xen/arm32: head: Rework and document launch() Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 23/28] xen/arm32: head: Setup HTTBR in enable_mmu() and add missing isb Julien Grall
2019-08-22 17:15   ` Stefano Stabellini [this message]
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 24/28] xen/arm: Zero BSS after the MMU and D-cache is turned on Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 25/28] xen/arm64: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-22 23:31   ` Stefano Stabellini
2019-08-22 23:44     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 26/28] xen/arm64: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall
2019-08-24  1:16   ` Stefano Stabellini
2019-09-17 17:53     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 27/28] xen/arm32: head: Introduce macros to create table and mapping entry Julien Grall
2019-08-23  1:10   ` Stefano Stabellini
2019-08-23  9:40     ` Julien Grall
2019-08-12 17:30 ` [Xen-devel] [PATCH v3 28/28] xen/arm32: head: Use a page mapping for the 1:1 mapping in create_page_tables() Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.21.1908221015310.22783@sstabellini-ThinkPad-T480s \
    --to=sstabellini@kernel.org \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=julien.grall@arm.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).