From: Wei Chen <wei.chen@arm.com>
To: <wei.chen@arm.com>, <xen-devel@lists.xenproject.org>,
<sstabellini@kernel.org>, <julien@xen.org>
Cc: <Bertrand.Marquis@arm.com>
Subject: [PATCH 01/37] xen/arm: Print a 64-bit number in hex from early uart
Date: Thu, 23 Sep 2021 20:02:00 +0800 [thread overview]
Message-ID: <20210923120236.3692135-2-wei.chen@arm.com> (raw)
In-Reply-To: <20210923120236.3692135-1-wei.chen@arm.com>
Current putn function that is using for early print
only can print low 32-bit of AArch64 register. This
will lose some important messages while debugging
with early console. For example:
(XEN) Bringing up CPU5
- CPU 0000000100000100 booting -
Will be truncated to
(XEN) Bringing up CPU5
- CPU 00000100 booting -
In this patch, we increased the print loops and shift
bits to make putn print 64-bit number.
Signed-off-by: Wei Chen <wei.chen@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
---
xen/arch/arm/arm64/head.S | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index aa1f88c764..d957ea377b 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -862,17 +862,18 @@ puts:
ret
ENDPROC(puts)
-/* Print a 32-bit number in hex. Specific to the PL011 UART.
+/* Print a 64-bit number in hex.
* x0: Number to print.
* x23: Early UART base address
* Clobbers x0-x3 */
+#define PRINT_MASK 0xf000000000000000
putn:
adr x1, hex
- mov x3, #8
+ mov x3, #16
1:
early_uart_ready x23, 2
- and x2, x0, #0xf0000000 /* Mask off the top nybble */
- lsr x2, x2, #28
+ and x2, x0, #PRINT_MASK /* Mask off the top nybble */
+ lsr x2, x2, #60
ldrb w2, [x1, x2] /* Convert to a char */
early_uart_transmit x23, w2
lsl x0, x0, #4 /* Roll it through one nybble at a time */
--
2.25.1
next prev parent reply other threads:[~2021-09-23 12:03 UTC|newest]
Thread overview: 192+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 12:01 [PATCH 00/37] Add device tree based NUMA support to Arm Wei Chen
2021-09-23 12:02 ` Wei Chen [this message]
2021-09-23 12:02 ` [PATCH 02/37] xen: introduce a Kconfig option to configure NUMA nodes number Wei Chen
2021-09-23 23:45 ` Stefano Stabellini
2021-09-24 1:24 ` Wei Chen
2021-09-24 8:55 ` Jan Beulich
2021-09-24 10:33 ` Wei Chen
2021-09-24 10:47 ` Jan Beulich
2021-09-23 12:02 ` [PATCH 03/37] xen/x86: Initialize memnodemapsize while faking NUMA node Wei Chen
2021-09-24 8:57 ` Jan Beulich
2021-09-24 10:34 ` Wei Chen
2021-09-23 12:02 ` [PATCH 04/37] xen: introduce an arch helper for default dma zone status Wei Chen
2021-09-23 23:55 ` Stefano Stabellini
2021-09-24 1:50 ` Wei Chen
2022-01-17 16:10 ` Jan Beulich
2022-01-18 7:51 ` Wei Chen
2022-01-18 8:16 ` Jan Beulich
2022-01-18 9:20 ` Wei Chen
2022-01-18 14:16 ` Jan Beulich
2022-01-19 2:49 ` Wei Chen
2022-01-19 7:50 ` Jan Beulich
2022-01-19 8:33 ` Wei Chen
2021-09-23 12:02 ` [PATCH 05/37] xen: decouple NUMA from ACPI in Kconfig Wei Chen
2021-09-23 12:02 ` [PATCH 06/37] xen/arm: use !CONFIG_NUMA to keep fake NUMA API Wei Chen
2021-09-24 0:05 ` Stefano Stabellini
2021-09-24 10:21 ` Wei Chen
2021-09-23 12:02 ` [PATCH 07/37] xen/x86: use paddr_t for addresses in NUMA node structure Wei Chen
2021-09-24 0:11 ` Stefano Stabellini
2021-09-24 0:13 ` Stefano Stabellini
2021-09-24 3:00 ` Wei Chen
2022-01-18 15:22 ` Jan Beulich
2022-01-19 6:33 ` Wei Chen
2022-01-19 7:55 ` Jan Beulich
2022-01-19 8:36 ` Wei Chen
2021-09-23 12:02 ` [PATCH 08/37] xen/x86: add detection of discontinous node memory range Wei Chen
2021-09-24 0:25 ` Stefano Stabellini
2021-09-24 4:28 ` Wei Chen
2021-09-24 19:52 ` Stefano Stabellini
2021-09-26 10:11 ` Wei Chen
2021-09-27 3:13 ` Stefano Stabellini
2021-09-27 5:05 ` Stefano Stabellini
2021-09-27 9:50 ` Wei Chen
2021-09-27 17:19 ` Stefano Stabellini
2021-09-28 4:41 ` Wei Chen
2021-09-28 4:59 ` Stefano Stabellini
2022-01-18 16:13 ` Jan Beulich
2022-01-19 7:33 ` Wei Chen
2022-01-19 8:01 ` Jan Beulich
2022-01-19 8:24 ` Wei Chen
2021-09-23 12:02 ` [PATCH 09/37] xen/x86: introduce two helpers to access memory hotplug end Wei Chen
2021-09-24 0:29 ` Stefano Stabellini
2021-09-24 4:21 ` Wei Chen
2022-01-24 16:24 ` Jan Beulich
2022-01-26 7:53 ` Wei Chen
2021-09-23 12:02 ` [PATCH 10/37] xen/x86: use helpers to access/update mem_hotplug Wei Chen
2021-09-24 0:31 ` Stefano Stabellini
2021-09-24 4:29 ` Wei Chen
2022-01-24 16:29 ` Jan Beulich
2022-01-26 7:58 ` Wei Chen
2021-09-23 12:02 ` [PATCH 11/37] xen/x86: abstract neutral code from acpi_numa_memory_affinity_init Wei Chen
2021-09-24 0:38 ` Stefano Stabellini
2022-01-24 16:50 ` Jan Beulich
2022-01-26 10:39 ` Wei Chen
2021-09-23 12:02 ` [PATCH 12/37] xen/x86: decouple nodes_cover_memory from E820 map Wei Chen
2021-09-24 0:39 ` Stefano Stabellini
2022-01-24 16:59 ` Jan Beulich
2022-01-27 8:03 ` Wei Chen
2022-01-27 8:08 ` Jan Beulich
2022-01-27 9:03 ` Wei Chen
2022-01-27 9:22 ` Jan Beulich
2022-01-27 9:27 ` Wei Chen
2021-09-23 12:02 ` [PATCH 13/37] xen/x86: decouple processor_nodes_parsed from acpi numa functions Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 9:49 ` Jan Beulich
2022-01-27 8:06 ` Wei Chen
2021-09-23 12:02 ` [PATCH 14/37] xen/x86: use name fw_numa to replace acpi_numa Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 10:12 ` Jan Beulich
2022-01-27 8:09 ` Wei Chen
2021-09-23 12:02 ` [PATCH 15/37] xen/x86: rename acpi_scan_nodes to numa_scan_nodes Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 10:17 ` Jan Beulich
2022-01-27 8:14 ` Wei Chen
2021-09-23 12:02 ` [PATCH 16/37] xen/x86: export srat_bad to external Wei Chen
2021-09-24 0:41 ` Stefano Stabellini
2022-01-25 10:22 ` Jan Beulich
2022-01-27 8:35 ` Wei Chen
2022-01-27 8:37 ` Jan Beulich
2022-01-27 8:47 ` Wei Chen
2021-09-23 12:02 ` [PATCH 17/37] xen/x86: use CONFIG_NUMA to gate numa_scan_nodes Wei Chen
2021-09-24 0:41 ` Stefano Stabellini
2022-01-25 10:26 ` Jan Beulich
2022-01-27 8:37 ` Wei Chen
2021-09-23 12:02 ` [PATCH 18/37] xen: move NUMA common code from x86 to common Wei Chen
2021-09-23 12:02 ` [PATCH 19/37] xen/x86: promote VIRTUAL_BUG_ON to ASSERT in Wei Chen
2022-01-17 16:21 ` Jan Beulich
2022-01-18 7:52 ` Wei Chen
2021-09-23 12:02 ` [PATCH 20/37] xen: introduce CONFIG_EFI to stub API for non-EFI architecture Wei Chen
2021-09-24 1:15 ` Stefano Stabellini
2021-09-24 4:34 ` Wei Chen
2021-09-24 7:58 ` Jan Beulich
2021-09-24 10:31 ` Wei Chen
2021-09-24 10:49 ` Jan Beulich
2021-09-26 10:25 ` Wei Chen
2021-09-27 10:28 ` Wei Chen
2021-09-28 0:59 ` Stefano Stabellini
2021-09-28 4:16 ` Wei Chen
2021-09-28 5:01 ` Stefano Stabellini
2021-09-28 8:02 ` Jan Beulich
2021-10-03 23:28 ` Wei Chen
2022-01-25 10:34 ` Jan Beulich
2022-01-27 8:44 ` Wei Chen
2022-01-27 8:51 ` Wei Chen
2022-01-27 9:00 ` Jan Beulich
2022-01-27 9:09 ` Wei Chen
2022-01-27 9:16 ` Jan Beulich
2022-01-27 9:25 ` Wei Chen
2022-01-27 9:27 ` Jan Beulich
2022-01-27 10:00 ` Julien Grall
2022-01-28 4:35 ` Wei Chen
2021-09-23 12:02 ` [PATCH 21/37] xen/arm: Keep memory nodes in dtb for NUMA when boot from EFI Wei Chen
2021-09-24 1:23 ` Stefano Stabellini
2021-09-24 4:36 ` Wei Chen
2022-01-25 10:38 ` Jan Beulich
2022-01-27 8:45 ` Wei Chen
2021-09-23 12:02 ` [PATCH 22/37] xen/arm: use NR_MEM_BANKS to override default NR_NODE_MEMBLKS Wei Chen
2021-09-24 1:34 ` Stefano Stabellini
2021-09-26 13:13 ` Wei Chen
2021-09-27 3:25 ` Stefano Stabellini
2021-09-27 4:18 ` Wei Chen
2021-09-27 4:59 ` Stefano Stabellini
2021-09-27 6:25 ` Julien Grall
2021-09-27 6:46 ` Wei Chen
2021-09-27 6:53 ` Wei Chen
2021-09-27 7:35 ` Julien Grall
2021-09-27 10:21 ` Wei Chen
2021-09-27 10:39 ` Julien Grall
2021-09-27 16:58 ` Stefano Stabellini
2021-09-28 2:57 ` Wei Chen
2021-09-23 12:02 ` [PATCH 23/37] xen/arm: implement node distance helpers for Arm Wei Chen
2021-09-24 1:46 ` Stefano Stabellini
2021-09-24 4:41 ` Wei Chen
2021-09-24 19:36 ` Stefano Stabellini
2021-09-26 10:15 ` Wei Chen
2021-09-23 12:02 ` [PATCH 24/37] xen/arm: implement two arch helpers to get memory map info Wei Chen
2021-09-24 2:06 ` Stefano Stabellini
2021-09-24 4:42 ` Wei Chen
2021-09-23 12:02 ` [PATCH 25/37] xen/arm: implement bad_srat for Arm NUMA initialization Wei Chen
2021-09-24 2:09 ` Stefano Stabellini
2021-09-24 4:45 ` Wei Chen
2021-09-24 8:07 ` Jan Beulich
2021-09-24 19:33 ` Stefano Stabellini
2021-09-23 12:02 ` [PATCH 26/37] xen/arm: build NUMA cpu_to_node map in dt_smp_init_cpus Wei Chen
2021-09-24 2:26 ` Stefano Stabellini
2021-09-24 4:25 ` Wei Chen
2021-09-23 12:02 ` [PATCH 27/37] xen/arm: Add boot and secondary CPU to NUMA system Wei Chen
2021-09-23 12:02 ` [PATCH 28/37] xen/arm: stub memory hotplug access helpers for Arm Wei Chen
2021-09-24 2:33 ` Stefano Stabellini
2021-09-24 4:26 ` Wei Chen
2021-09-23 12:02 ` [PATCH 29/37] xen/arm: introduce a helper to parse device tree processor node Wei Chen
2021-09-24 2:44 ` Stefano Stabellini
2021-09-24 4:46 ` Wei Chen
2021-09-23 12:02 ` [PATCH 30/37] xen/arm: introduce a helper to parse device tree memory node Wei Chen
2021-09-24 3:05 ` Stefano Stabellini
2021-09-24 7:54 ` Wei Chen
2021-09-23 12:02 ` [PATCH 31/37] xen/arm: introduce a helper to parse device tree NUMA distance map Wei Chen
2021-09-24 3:05 ` Stefano Stabellini
2021-09-24 5:23 ` Wei Chen
2021-09-23 12:02 ` [PATCH 32/37] xen/arm: unified entry to parse all NUMA data from device tree Wei Chen
2021-09-24 3:16 ` Stefano Stabellini
2021-09-24 7:58 ` Wei Chen
2021-09-24 19:42 ` Stefano Stabellini
2021-09-23 12:02 ` [PATCH 33/37] xen/arm: keep guest still be NUMA unware Wei Chen
2021-09-24 3:19 ` Stefano Stabellini
2021-09-24 10:23 ` Wei Chen
2021-09-23 12:02 ` [PATCH 34/37] xen/arm: enable device tree based NUMA in system init Wei Chen
2021-09-24 3:28 ` Stefano Stabellini
2021-09-24 9:52 ` Wei Chen
2021-09-23 12:02 ` [PATCH 35/37] xen/arm: use CONFIG_NUMA to gate node_online_map in smpboot Wei Chen
2021-09-23 12:02 ` [PATCH 36/37] xen/arm: Provide Kconfig options for Arm to enable NUMA Wei Chen
2021-09-24 3:31 ` Stefano Stabellini
2021-09-24 10:13 ` Wei Chen
2021-09-24 19:39 ` Stefano Stabellini
2021-09-27 8:33 ` Jan Beulich
2021-09-27 8:45 ` Julien Grall
2021-09-27 9:17 ` Jan Beulich
2021-09-27 17:17 ` Stefano Stabellini
2021-09-28 2:59 ` Wei Chen
2021-09-28 3:30 ` Stefano Stabellini
2021-09-24 10:25 ` Jan Beulich
2021-09-24 10:37 ` Wei Chen
2021-09-23 12:02 ` [PATCH 37/37] docs: update numa command line to support Arm Wei Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210923120236.3692135-2-wei.chen@arm.com \
--to=wei.chen@arm.com \
--cc=Bertrand.Marquis@arm.com \
--cc=julien@xen.org \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).