From: Stefano Stabellini <sstabellini@kernel.org>
To: Wei Chen <wei.chen@arm.com>
Cc: xen-devel@lists.xenproject.org, sstabellini@kernel.org,
julien@xen.org, Bertrand.Marquis@arm.com, jbeulich@suse.com,
andrew.cooper3@citrix.com, roger.pau@citrix.com, wl@xen.org
Subject: Re: [PATCH 11/37] xen/x86: abstract neutral code from acpi_numa_memory_affinity_init
Date: Thu, 23 Sep 2021 17:38:27 -0700 (PDT) [thread overview]
Message-ID: <alpine.DEB.2.21.2109231732150.17979@sstabellini-ThinkPad-T480s> (raw)
In-Reply-To: <20210923120236.3692135-12-wei.chen@arm.com>
+x86 maintainers
On Thu, 23 Sep 2021, Wei Chen wrote:
> There is some code in acpi_numa_memory_affinity_init to update node
> memory range and update node_memblk_range array. This code is not
> ACPI specific, it can be shared by other NUMA implementation, like
> device tree based NUMA implementation.
>
> So in this patch, we abstract this memory range and blocks relative
> code to a new function. This will avoid exporting static variables
> like node_memblk_range. And the PXM in neutral code print messages
> have been replaced by NODE, as PXM is ACPI specific.
>
> Signed-off-by: Wei Chen <wei.chen@arm.com>
> ---
> xen/arch/x86/srat.c | 131 +++++++++++++++++++++----------------
> xen/include/asm-x86/numa.h | 3 +
> 2 files changed, 77 insertions(+), 57 deletions(-)
>
> diff --git a/xen/arch/x86/srat.c b/xen/arch/x86/srat.c
> index 3334ede7a5..18bc6b19bb 100644
> --- a/xen/arch/x86/srat.c
> +++ b/xen/arch/x86/srat.c
> @@ -104,6 +104,14 @@ nodeid_t setup_node(unsigned pxm)
> return node;
> }
>
> +bool __init numa_memblks_available(void)
> +{
> + if (num_node_memblks < NR_NODE_MEMBLKS)
> + return true;
> +
> + return false;
> +}
> +
> int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)
> {
> int i;
> @@ -301,69 +309,35 @@ static bool __init is_node_memory_continuous(nodeid_t nid,
> return true;
> }
>
> -/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
> -void __init
> -acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
> +/* Neutral NUMA memory affinity init function for ACPI and DT */
> +int __init numa_update_node_memblks(nodeid_t node,
> + paddr_t start, paddr_t size, bool hotplug)
> {
> - paddr_t start, end;
> - unsigned pxm;
> - nodeid_t node;
> + paddr_t end = start + size;
> int i;
>
> - if (srat_disabled())
> - return;
> - if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
> - bad_srat();
> - return;
> - }
> - if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
> - return;
> -
> - start = ma->base_address;
> - end = start + ma->length;
> - /* Supplement the heuristics in l1tf_calculations(). */
> - l1tf_safe_maddr = max(l1tf_safe_maddr, ROUNDUP(end, PAGE_SIZE));
> -
> - if (num_node_memblks >= NR_NODE_MEMBLKS)
> - {
> - dprintk(XENLOG_WARNING,
> - "Too many numa entry, try bigger NR_NODE_MEMBLKS \n");
> - bad_srat();
> - return;
> - }
> -
> - pxm = ma->proximity_domain;
> - if (srat_rev < 2)
> - pxm &= 0xff;
> - node = setup_node(pxm);
> - if (node == NUMA_NO_NODE) {
> - bad_srat();
> - return;
> - }
> - /* It is fine to add this area to the nodes data it will be used later*/
> + /* It is fine to add this area to the nodes data it will be used later */
> i = conflicting_memblks(start, end);
> if (i < 0)
> /* everything fine */;
> else if (memblk_nodeid[i] == node) {
> - bool mismatch = !(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) !=
> - !test_bit(i, memblk_hotplug);
> + bool mismatch = !hotplug != !test_bit(i, memblk_hotplug);
>
> - printk("%sSRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with itself (%"PRIpaddr"-%"PRIpaddr")\n",
> - mismatch ? KERN_ERR : KERN_WARNING, pxm, start, end,
> + printk("%sSRAT: NODE %u (%"PRIpaddr"-%"PRIpaddr") overlaps with itself (%"PRIpaddr"-%"PRIpaddr")\n",
> + mismatch ? KERN_ERR : KERN_WARNING, node, start, end,
> node_memblk_range[i].start, node_memblk_range[i].end);
> if (mismatch) {
> - bad_srat();
> - return;
> + return -1;
> }
> } else {
> printk(KERN_ERR
> - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with PXM %u (%"PRIpaddr"-%"PRIpaddr")\n",
> - pxm, start, end, node_to_pxm(memblk_nodeid[i]),
> + "SRAT: NODE %u (%"PRIpaddr"-%"PRIpaddr") overlaps with NODE %u (%"PRIpaddr"-%"PRIpaddr")\n",
> + node, start, end, memblk_nodeid[i],
> node_memblk_range[i].start, node_memblk_range[i].end);
> - bad_srat();
> - return;
> + return -1;
> }
> - if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)) {
> +
> + if (!hotplug) {
> struct node *nd = &nodes[node];
>
> if (!node_test_and_set(node, memory_nodes_parsed)) {
> @@ -375,26 +349,69 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
> if (nd->end < end)
> nd->end = end;
>
> - /* Check whether this range contains memory for other nodes */
> - if (!is_node_memory_continuous(node, nd->start, nd->end)) {
> - bad_srat();
> - return;
> - }
> + if (!is_node_memory_continuous(node, nd->start, nd->end))
> + return -1;
> }
> }
> - printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIpaddr"-%"PRIpaddr"%s\n",
> - node, pxm, start, end,
> - ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE ? " (hotplug)" : "");
> +
> + printk(KERN_INFO "SRAT: Node %u %"PRIpaddr"-%"PRIpaddr"%s\n",
> + node, start, end, hotplug ? " (hotplug)" : "");
>
> node_memblk_range[num_node_memblks].start = start;
> node_memblk_range[num_node_memblks].end = end;
> memblk_nodeid[num_node_memblks] = node;
> - if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
> + if (hotplug) {
> __set_bit(num_node_memblks, memblk_hotplug);
> if (end > mem_hotplug_boundary())
> mem_hotplug_update_boundary(end);
> }
> num_node_memblks++;
> +
> + return 0;
> +}
> +
> +/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
> +void __init
> +acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
> +{
> + unsigned pxm;
> + nodeid_t node;
> + int ret;
> +
> + if (srat_disabled())
> + return;
> + if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
> + bad_srat();
> + return;
> + }
> + if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
> + return;
> +
> + /* Supplement the heuristics in l1tf_calculations(). */
> + l1tf_safe_maddr = max(l1tf_safe_maddr,
> + ROUNDUP((ma->base_address + ma->length), PAGE_SIZE));
> +
> + if (!numa_memblks_available())
> + {
> + dprintk(XENLOG_WARNING,
> + "Too many numa entry, try bigger NR_NODE_MEMBLKS \n");
> + bad_srat();
> + return;
> + }
> +
> + pxm = ma->proximity_domain;
> + if (srat_rev < 2)
> + pxm &= 0xff;
> + node = setup_node(pxm);
> + if (node == NUMA_NO_NODE) {
> + bad_srat();
> + return;
> + }
> +
> + ret = numa_update_node_memblks(node, ma->base_address, ma->length,
> + ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE);
> + if (ret != 0)
> + bad_srat();
> }
>
> /* Sanity check to catch more bad SRATs (they are amazingly common).
> diff --git a/xen/include/asm-x86/numa.h b/xen/include/asm-x86/numa.h
> index 50cfd8e7ef..5772a70665 100644
> --- a/xen/include/asm-x86/numa.h
> +++ b/xen/include/asm-x86/numa.h
> @@ -74,6 +74,9 @@ static inline __attribute__((pure)) nodeid_t phys_to_nid(paddr_t addr)
> NODE_DATA(nid)->node_spanned_pages)
>
> extern int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node);
> +extern bool numa_memblks_available(void);
> +extern int numa_update_node_memblks(nodeid_t node,
> + paddr_t start, paddr_t size, bool hotplug);
>
> void srat_parse_regions(paddr_t addr);
> extern u8 __node_distance(nodeid_t a, nodeid_t b);
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-09-24 0:38 UTC|newest]
Thread overview: 192+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 12:01 [PATCH 00/37] Add device tree based NUMA support to Arm Wei Chen
2021-09-23 12:02 ` [PATCH 01/37] xen/arm: Print a 64-bit number in hex from early uart Wei Chen
2021-09-23 12:02 ` [PATCH 02/37] xen: introduce a Kconfig option to configure NUMA nodes number Wei Chen
2021-09-23 23:45 ` Stefano Stabellini
2021-09-24 1:24 ` Wei Chen
2021-09-24 8:55 ` Jan Beulich
2021-09-24 10:33 ` Wei Chen
2021-09-24 10:47 ` Jan Beulich
2021-09-23 12:02 ` [PATCH 03/37] xen/x86: Initialize memnodemapsize while faking NUMA node Wei Chen
2021-09-24 8:57 ` Jan Beulich
2021-09-24 10:34 ` Wei Chen
2021-09-23 12:02 ` [PATCH 04/37] xen: introduce an arch helper for default dma zone status Wei Chen
2021-09-23 23:55 ` Stefano Stabellini
2021-09-24 1:50 ` Wei Chen
2022-01-17 16:10 ` Jan Beulich
2022-01-18 7:51 ` Wei Chen
2022-01-18 8:16 ` Jan Beulich
2022-01-18 9:20 ` Wei Chen
2022-01-18 14:16 ` Jan Beulich
2022-01-19 2:49 ` Wei Chen
2022-01-19 7:50 ` Jan Beulich
2022-01-19 8:33 ` Wei Chen
2021-09-23 12:02 ` [PATCH 05/37] xen: decouple NUMA from ACPI in Kconfig Wei Chen
2021-09-23 12:02 ` [PATCH 06/37] xen/arm: use !CONFIG_NUMA to keep fake NUMA API Wei Chen
2021-09-24 0:05 ` Stefano Stabellini
2021-09-24 10:21 ` Wei Chen
2021-09-23 12:02 ` [PATCH 07/37] xen/x86: use paddr_t for addresses in NUMA node structure Wei Chen
2021-09-24 0:11 ` Stefano Stabellini
2021-09-24 0:13 ` Stefano Stabellini
2021-09-24 3:00 ` Wei Chen
2022-01-18 15:22 ` Jan Beulich
2022-01-19 6:33 ` Wei Chen
2022-01-19 7:55 ` Jan Beulich
2022-01-19 8:36 ` Wei Chen
2021-09-23 12:02 ` [PATCH 08/37] xen/x86: add detection of discontinous node memory range Wei Chen
2021-09-24 0:25 ` Stefano Stabellini
2021-09-24 4:28 ` Wei Chen
2021-09-24 19:52 ` Stefano Stabellini
2021-09-26 10:11 ` Wei Chen
2021-09-27 3:13 ` Stefano Stabellini
2021-09-27 5:05 ` Stefano Stabellini
2021-09-27 9:50 ` Wei Chen
2021-09-27 17:19 ` Stefano Stabellini
2021-09-28 4:41 ` Wei Chen
2021-09-28 4:59 ` Stefano Stabellini
2022-01-18 16:13 ` Jan Beulich
2022-01-19 7:33 ` Wei Chen
2022-01-19 8:01 ` Jan Beulich
2022-01-19 8:24 ` Wei Chen
2021-09-23 12:02 ` [PATCH 09/37] xen/x86: introduce two helpers to access memory hotplug end Wei Chen
2021-09-24 0:29 ` Stefano Stabellini
2021-09-24 4:21 ` Wei Chen
2022-01-24 16:24 ` Jan Beulich
2022-01-26 7:53 ` Wei Chen
2021-09-23 12:02 ` [PATCH 10/37] xen/x86: use helpers to access/update mem_hotplug Wei Chen
2021-09-24 0:31 ` Stefano Stabellini
2021-09-24 4:29 ` Wei Chen
2022-01-24 16:29 ` Jan Beulich
2022-01-26 7:58 ` Wei Chen
2021-09-23 12:02 ` [PATCH 11/37] xen/x86: abstract neutral code from acpi_numa_memory_affinity_init Wei Chen
2021-09-24 0:38 ` Stefano Stabellini [this message]
2022-01-24 16:50 ` Jan Beulich
2022-01-26 10:39 ` Wei Chen
2021-09-23 12:02 ` [PATCH 12/37] xen/x86: decouple nodes_cover_memory from E820 map Wei Chen
2021-09-24 0:39 ` Stefano Stabellini
2022-01-24 16:59 ` Jan Beulich
2022-01-27 8:03 ` Wei Chen
2022-01-27 8:08 ` Jan Beulich
2022-01-27 9:03 ` Wei Chen
2022-01-27 9:22 ` Jan Beulich
2022-01-27 9:27 ` Wei Chen
2021-09-23 12:02 ` [PATCH 13/37] xen/x86: decouple processor_nodes_parsed from acpi numa functions Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 9:49 ` Jan Beulich
2022-01-27 8:06 ` Wei Chen
2021-09-23 12:02 ` [PATCH 14/37] xen/x86: use name fw_numa to replace acpi_numa Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 10:12 ` Jan Beulich
2022-01-27 8:09 ` Wei Chen
2021-09-23 12:02 ` [PATCH 15/37] xen/x86: rename acpi_scan_nodes to numa_scan_nodes Wei Chen
2021-09-24 0:40 ` Stefano Stabellini
2022-01-25 10:17 ` Jan Beulich
2022-01-27 8:14 ` Wei Chen
2021-09-23 12:02 ` [PATCH 16/37] xen/x86: export srat_bad to external Wei Chen
2021-09-24 0:41 ` Stefano Stabellini
2022-01-25 10:22 ` Jan Beulich
2022-01-27 8:35 ` Wei Chen
2022-01-27 8:37 ` Jan Beulich
2022-01-27 8:47 ` Wei Chen
2021-09-23 12:02 ` [PATCH 17/37] xen/x86: use CONFIG_NUMA to gate numa_scan_nodes Wei Chen
2021-09-24 0:41 ` Stefano Stabellini
2022-01-25 10:26 ` Jan Beulich
2022-01-27 8:37 ` Wei Chen
2021-09-23 12:02 ` [PATCH 18/37] xen: move NUMA common code from x86 to common Wei Chen
2021-09-23 12:02 ` [PATCH 19/37] xen/x86: promote VIRTUAL_BUG_ON to ASSERT in Wei Chen
2022-01-17 16:21 ` Jan Beulich
2022-01-18 7:52 ` Wei Chen
2021-09-23 12:02 ` [PATCH 20/37] xen: introduce CONFIG_EFI to stub API for non-EFI architecture Wei Chen
2021-09-24 1:15 ` Stefano Stabellini
2021-09-24 4:34 ` Wei Chen
2021-09-24 7:58 ` Jan Beulich
2021-09-24 10:31 ` Wei Chen
2021-09-24 10:49 ` Jan Beulich
2021-09-26 10:25 ` Wei Chen
2021-09-27 10:28 ` Wei Chen
2021-09-28 0:59 ` Stefano Stabellini
2021-09-28 4:16 ` Wei Chen
2021-09-28 5:01 ` Stefano Stabellini
2021-09-28 8:02 ` Jan Beulich
2021-10-03 23:28 ` Wei Chen
2022-01-25 10:34 ` Jan Beulich
2022-01-27 8:44 ` Wei Chen
2022-01-27 8:51 ` Wei Chen
2022-01-27 9:00 ` Jan Beulich
2022-01-27 9:09 ` Wei Chen
2022-01-27 9:16 ` Jan Beulich
2022-01-27 9:25 ` Wei Chen
2022-01-27 9:27 ` Jan Beulich
2022-01-27 10:00 ` Julien Grall
2022-01-28 4:35 ` Wei Chen
2021-09-23 12:02 ` [PATCH 21/37] xen/arm: Keep memory nodes in dtb for NUMA when boot from EFI Wei Chen
2021-09-24 1:23 ` Stefano Stabellini
2021-09-24 4:36 ` Wei Chen
2022-01-25 10:38 ` Jan Beulich
2022-01-27 8:45 ` Wei Chen
2021-09-23 12:02 ` [PATCH 22/37] xen/arm: use NR_MEM_BANKS to override default NR_NODE_MEMBLKS Wei Chen
2021-09-24 1:34 ` Stefano Stabellini
2021-09-26 13:13 ` Wei Chen
2021-09-27 3:25 ` Stefano Stabellini
2021-09-27 4:18 ` Wei Chen
2021-09-27 4:59 ` Stefano Stabellini
2021-09-27 6:25 ` Julien Grall
2021-09-27 6:46 ` Wei Chen
2021-09-27 6:53 ` Wei Chen
2021-09-27 7:35 ` Julien Grall
2021-09-27 10:21 ` Wei Chen
2021-09-27 10:39 ` Julien Grall
2021-09-27 16:58 ` Stefano Stabellini
2021-09-28 2:57 ` Wei Chen
2021-09-23 12:02 ` [PATCH 23/37] xen/arm: implement node distance helpers for Arm Wei Chen
2021-09-24 1:46 ` Stefano Stabellini
2021-09-24 4:41 ` Wei Chen
2021-09-24 19:36 ` Stefano Stabellini
2021-09-26 10:15 ` Wei Chen
2021-09-23 12:02 ` [PATCH 24/37] xen/arm: implement two arch helpers to get memory map info Wei Chen
2021-09-24 2:06 ` Stefano Stabellini
2021-09-24 4:42 ` Wei Chen
2021-09-23 12:02 ` [PATCH 25/37] xen/arm: implement bad_srat for Arm NUMA initialization Wei Chen
2021-09-24 2:09 ` Stefano Stabellini
2021-09-24 4:45 ` Wei Chen
2021-09-24 8:07 ` Jan Beulich
2021-09-24 19:33 ` Stefano Stabellini
2021-09-23 12:02 ` [PATCH 26/37] xen/arm: build NUMA cpu_to_node map in dt_smp_init_cpus Wei Chen
2021-09-24 2:26 ` Stefano Stabellini
2021-09-24 4:25 ` Wei Chen
2021-09-23 12:02 ` [PATCH 27/37] xen/arm: Add boot and secondary CPU to NUMA system Wei Chen
2021-09-23 12:02 ` [PATCH 28/37] xen/arm: stub memory hotplug access helpers for Arm Wei Chen
2021-09-24 2:33 ` Stefano Stabellini
2021-09-24 4:26 ` Wei Chen
2021-09-23 12:02 ` [PATCH 29/37] xen/arm: introduce a helper to parse device tree processor node Wei Chen
2021-09-24 2:44 ` Stefano Stabellini
2021-09-24 4:46 ` Wei Chen
2021-09-23 12:02 ` [PATCH 30/37] xen/arm: introduce a helper to parse device tree memory node Wei Chen
2021-09-24 3:05 ` Stefano Stabellini
2021-09-24 7:54 ` Wei Chen
2021-09-23 12:02 ` [PATCH 31/37] xen/arm: introduce a helper to parse device tree NUMA distance map Wei Chen
2021-09-24 3:05 ` Stefano Stabellini
2021-09-24 5:23 ` Wei Chen
2021-09-23 12:02 ` [PATCH 32/37] xen/arm: unified entry to parse all NUMA data from device tree Wei Chen
2021-09-24 3:16 ` Stefano Stabellini
2021-09-24 7:58 ` Wei Chen
2021-09-24 19:42 ` Stefano Stabellini
2021-09-23 12:02 ` [PATCH 33/37] xen/arm: keep guest still be NUMA unware Wei Chen
2021-09-24 3:19 ` Stefano Stabellini
2021-09-24 10:23 ` Wei Chen
2021-09-23 12:02 ` [PATCH 34/37] xen/arm: enable device tree based NUMA in system init Wei Chen
2021-09-24 3:28 ` Stefano Stabellini
2021-09-24 9:52 ` Wei Chen
2021-09-23 12:02 ` [PATCH 35/37] xen/arm: use CONFIG_NUMA to gate node_online_map in smpboot Wei Chen
2021-09-23 12:02 ` [PATCH 36/37] xen/arm: Provide Kconfig options for Arm to enable NUMA Wei Chen
2021-09-24 3:31 ` Stefano Stabellini
2021-09-24 10:13 ` Wei Chen
2021-09-24 19:39 ` Stefano Stabellini
2021-09-27 8:33 ` Jan Beulich
2021-09-27 8:45 ` Julien Grall
2021-09-27 9:17 ` Jan Beulich
2021-09-27 17:17 ` Stefano Stabellini
2021-09-28 2:59 ` Wei Chen
2021-09-28 3:30 ` Stefano Stabellini
2021-09-24 10:25 ` Jan Beulich
2021-09-24 10:37 ` Wei Chen
2021-09-23 12:02 ` [PATCH 37/37] docs: update numa command line to support Arm Wei Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.21.2109231732150.17979@sstabellini-ThinkPad-T480s \
--to=sstabellini@kernel.org \
--cc=Bertrand.Marquis@arm.com \
--cc=andrew.cooper3@citrix.com \
--cc=jbeulich@suse.com \
--cc=julien@xen.org \
--cc=roger.pau@citrix.com \
--cc=wei.chen@arm.com \
--cc=wl@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).