* import a layer directory problem @ 2017-10-16 7:52 Stéphane Ancelot 2017-10-16 9:03 ` Reyna, David 0 siblings, 1 reply; 7+ messages in thread From: Stéphane Ancelot @ 2017-10-16 7:52 UTC (permalink / raw) To: toaster hi, I have got some problems trying to import a layer : I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) then in toaster, I setted the pathname of my layer directory. I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... Regards, Stéphane ANCELOT ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-16 7:52 import a layer directory problem Stéphane Ancelot @ 2017-10-16 9:03 ` Reyna, David 2017-10-16 12:08 ` Stéphane Ancelot 0 siblings, 1 reply; 7+ messages in thread From: Reyna, David @ 2017-10-16 9:03 UTC (permalink / raw) To: Stéphane Ancelot; +Cc: toaster Hi Stéphane, You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. If after a build you still do not see information, then please file a defect. Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. - David -----Original Message----- From: toaster-bounces@yoctoproject.org [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot Sent: Monday, October 16, 2017 12:52 AM To: toaster@yoctoproject.org Subject: [Toaster] import a layer directory problem hi, I have got some problems trying to import a layer : I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) then in toaster, I setted the pathname of my layer directory. I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... Regards, Stéphane ANCELOT -- _______________________________________________ toaster mailing list toaster@yoctoproject.org https://lists.yoctoproject.org/listinfo/toaster ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-16 9:03 ` Reyna, David @ 2017-10-16 12:08 ` Stéphane Ancelot 2017-10-16 14:49 ` Stéphane Ancelot 0 siblings, 1 reply; 7+ messages in thread From: Stéphane Ancelot @ 2017-10-16 12:08 UTC (permalink / raw) To: Reyna, David; +Cc: toaster [-- Attachment #1: Type: text/plain, Size: 2008 bytes --] Unfortunately, when I try to rebuild with this layer, I have next error sequence item 3: expected str instance, NoneType found I will at first try the custom.xml setup .... this will permit to inhibit some mistakes related to bad layer configuration. Regards Steph Le 16/10/2017 à 11:03, Reyna, David a écrit : > Hi Stéphane, > > You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. > > If after a build you still do not see information, then please file a defect. > > Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. > > - David > > -----Original Message----- > From: toaster-bounces@yoctoproject.org [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot > Sent: Monday, October 16, 2017 12:52 AM > To: toaster@yoctoproject.org > Subject: [Toaster] import a layer directory problem > > hi, > > I have got some problems trying to import a layer : > > I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) > > then in toaster, I setted the pathname of my layer directory. > > I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... > > Regards, > > Stéphane ANCELOT > -- > _______________________________________________ > toaster mailing list > toaster@yoctoproject.org > https://lists.yoctoproject.org/listinfo/toaster [-- Attachment #2: Type: text/html, Size: 3509 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-16 12:08 ` Stéphane Ancelot @ 2017-10-16 14:49 ` Stéphane Ancelot 2017-10-16 17:27 ` Reyna, David 0 siblings, 1 reply; 7+ messages in thread From: Stéphane Ancelot @ 2017-10-16 14:49 UTC (permalink / raw) To: Reyna, David; +Cc: toaster [-- Attachment #1: Type: text/plain, Size: 2764 bytes --] Hi, I have now more precise details regarding this issue : 1/ from the web interface , import your layer : select "in a directory", and fill in the path click import and add to project Next, go to the layers view and edit the imported layer ===>> the path to the layer directory is set to None This implies when building you have next message (not really user friendly ...): sequence item 3: expected str instance, NoneType found But once you edited again the path to the layer directory and save it in the layer view , everything goes well since it is not setted to None anymore. Regards, S.Ancelot Le 16/10/2017 à 14:08, Stéphane Ancelot a écrit : > Unfortunately, when I try to rebuild with this layer, I have next error > sequence item 3: expected str instance, NoneType found > > I will at first try the custom.xml setup .... this will permit to > inhibit some mistakes related to bad layer configuration. Regards Steph > Le 16/10/2017 à 11:03, Reyna, David a écrit : >> Hi Stéphane, >> >> You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. >> >> If after a build you still do not see information, then please file a defect. >> >> Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. >> >> - David >> >> -----Original Message----- >> From:toaster-bounces@yoctoproject.org [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot >> Sent: Monday, October 16, 2017 12:52 AM >> To:toaster@yoctoproject.org >> Subject: [Toaster] import a layer directory problem >> >> hi, >> >> I have got some problems trying to import a layer : >> >> I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) >> >> then in toaster, I setted the pathname of my layer directory. >> >> I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... >> >> Regards, >> >> Stéphane ANCELOT >> -- >> _______________________________________________ >> toaster mailing list >> toaster@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/toaster > > > [-- Attachment #2: Type: text/html, Size: 5596 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-16 14:49 ` Stéphane Ancelot @ 2017-10-16 17:27 ` Reyna, David 2017-10-17 7:48 ` Stéphane Ancelot 0 siblings, 1 reply; 7+ messages in thread From: Reyna, David @ 2017-10-16 17:27 UTC (permalink / raw) To: Stéphane Ancelot; +Cc: toaster [-- Attachment #1: Type: text/plain, Size: 3260 bytes --] Hi Stéphane, This issues should have been resolved by Bug #9924: https://bugzilla.yoctoproject.org/show_bug.cgi?id=9924 Are you using Rocko or master? You should see the patch there. - David From: Stéphane Ancelot [mailto:sancelot@numalliance.com] Sent: Monday, October 16, 2017 7:49 AM To: Reyna, David Cc: toaster@yoctoproject.org Subject: Re: [Toaster] import a layer directory problem Hi, I have now more precise details regarding this issue : 1/ from the web interface , import your layer : select "in a directory", and fill in the path click import and add to project Next, go to the layers view and edit the imported layer ===>> the path to the layer directory is set to None This implies when building you have next message (not really user friendly ...): sequence item 3: expected str instance, NoneType found But once you edited again the path to the layer directory and save it in the layer view , everything goes well since it is not setted to None anymore. Regards, S.Ancelot Le 16/10/2017 à 14:08, Stéphane Ancelot a écrit : Unfortunately, when I try to rebuild with this layer, I have next error sequence item 3: expected str instance, NoneType found I will at first try the custom.xml setup .... this will permit to inhibit some mistakes related to bad layer configuration. Regards Steph Le 16/10/2017 à 11:03, Reyna, David a écrit : Hi Stéphane, You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. If after a build you still do not see information, then please file a defect. Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. - David -----Original Message----- From: toaster-bounces@yoctoproject.org<mailto:toaster-bounces@yoctoproject.org> [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot Sent: Monday, October 16, 2017 12:52 AM To: toaster@yoctoproject.org<mailto:toaster@yoctoproject.org> Subject: [Toaster] import a layer directory problem hi, I have got some problems trying to import a layer : I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) then in toaster, I setted the pathname of my layer directory. I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... Regards, Stéphane ANCELOT -- _______________________________________________ toaster mailing list toaster@yoctoproject.org<mailto:toaster@yoctoproject.org> https://lists.yoctoproject.org/listinfo/toaster [-- Attachment #2: Type: text/html, Size: 10918 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-16 17:27 ` Reyna, David @ 2017-10-17 7:48 ` Stéphane Ancelot 2017-10-19 10:18 ` Stéphane Ancelot 0 siblings, 1 reply; 7+ messages in thread From: Stéphane Ancelot @ 2017-10-17 7:48 UTC (permalink / raw) To: Reyna, David; +Cc: toaster [-- Attachment #1: Type: text/plain, Size: 3724 bytes --] Le 16/10/2017 à 19:27, Reyna, David a écrit : > > Hi Stéphane, > > This issues should have been resolved by Bug #9924: > > https://bugzilla.yoctoproject.org/show_bug.cgi?id=9924 > > Are you using Rocko or master? You should see the patch there. > I am using rocko. what do I need to do to switch to master ? > - David > > *From:*Stéphane Ancelot [mailto:sancelot@numalliance.com] > *Sent:* Monday, October 16, 2017 7:49 AM > *To:* Reyna, David > *Cc:* toaster@yoctoproject.org > *Subject:* Re: [Toaster] import a layer directory problem > > Hi, > > I have now more precise details regarding this issue : > > 1/ from the web interface , import your layer : > > select "in a directory", and fill in the path > > click import and add to project > > Next, go to the layers view and edit the imported layer > > ===>> the path to the layer directory is set to None > > This implies when building you have next message (not really user > friendly ...): > > sequence item 3: expected str instance, NoneType found > > But once you edited again the path to the layer directory and save it > in the layer view , everything goes well since it is not setted to > None anymore. > > Regards, > > S.Ancelot > > Le 16/10/2017 à 14:08, Stéphane Ancelot a écrit : > > Unfortunately, when I try to rebuild with this layer, I have next > error > > sequence item 3: expected str instance, NoneType found > > I will at first try the custom.xml setup .... this will permit to > inhibit some mistakes related to bad layer configuration. > > Regards > > Steph > > Le 16/10/2017 à 11:03, Reyna, David a écrit : > > Hi Stéphane, > > You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. > > If after a build you still do not see information, then please file a defect. > > Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. > > - David > > -----Original Message----- > > From:toaster-bounces@yoctoproject.org > <mailto:toaster-bounces@yoctoproject.org> [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot > > Sent: Monday, October 16, 2017 12:52 AM > > To:toaster@yoctoproject.org <mailto:toaster@yoctoproject.org> > > Subject: [Toaster] import a layer directory problem > > hi, > > I have got some problems trying to import a layer : > > I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) > > then in toaster, I setted the pathname of my layer directory. > > I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... > > Regards, > > Stéphane ANCELOT > > -- > > _______________________________________________ > > toaster mailing list > > toaster@yoctoproject.org <mailto:toaster@yoctoproject.org> > > https://lists.yoctoproject.org/listinfo/toaster > > > > [-- Attachment #2: Type: text/html, Size: 12718 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: import a layer directory problem 2017-10-17 7:48 ` Stéphane Ancelot @ 2017-10-19 10:18 ` Stéphane Ancelot 0 siblings, 0 replies; 7+ messages in thread From: Stéphane Ancelot @ 2017-10-19 10:18 UTC (permalink / raw) To: Reyna, David; +Cc: toaster [-- Attachment #1: Type: text/plain, Size: 4262 bytes --] Hi, I switched to master. The problem is not related to this bug. This is when you are importing from a layer in a directory. The absolute path to the layer directory is not saved and None instead is stored. you have to edit the layer imported and replace the None layer directory information with the directory. Regards, S.Ancelot Le 17/10/2017 à 09:48, Stéphane Ancelot a écrit : > > > > Le 16/10/2017 à 19:27, Reyna, David a écrit : >> >> Hi Stéphane, >> >> This issues should have been resolved by Bug #9924: >> >> https://bugzilla.yoctoproject.org/show_bug.cgi?id=9924 >> >> Are you using Rocko or master? You should see the patch there. >> > I am using rocko. what do I need to do to switch to master ? > >> - David >> >> *From:*Stéphane Ancelot [mailto:sancelot@numalliance.com] >> *Sent:* Monday, October 16, 2017 7:49 AM >> *To:* Reyna, David >> *Cc:* toaster@yoctoproject.org >> *Subject:* Re: [Toaster] import a layer directory problem >> >> Hi, >> >> I have now more precise details regarding this issue : >> >> 1/ from the web interface , import your layer : >> >> select "in a directory", and fill in the path >> >> click import and add to project >> >> Next, go to the layers view and edit the imported layer >> >> ===>> the path to the layer directory is set to None >> >> This implies when building you have next message (not really user >> friendly ...): >> >> sequence item 3: expected str instance, NoneType found >> >> But once you edited again the path to the layer directory and save >> it in the layer view , everything goes well since it is not setted to >> None anymore. >> >> Regards, >> >> S.Ancelot >> >> Le 16/10/2017 à 14:08, Stéphane Ancelot a écrit : >> >> Unfortunately, when I try to rebuild with this layer, I have next >> error >> >> sequence item 3: expected str instance, NoneType found >> >> I will at first try the custom.xml setup .... this will permit to >> inhibit some mistakes related to bad layer configuration. >> >> Regards >> >> Steph >> >> Le 16/10/2017 à 11:03, Reyna, David a écrit : >> >> Hi Stéphane, >> >> You have to build a project with the imported layer before Toaster know anything. Since this layer did not come from the Layer Index (with all the metadata provided), Toaster has to derive the layer information from bitbake events as the project builds. >> >> If after a build you still do not see information, then please file a defect. >> >> Alternatively, if you want to see the layer data immediately when it is imported (e.g. you use this layer in different Toaster instances and/or you are sharing the layer with others) and you do not mind being clever (e.g. doing a hack), you can add the layer information explicitly to "toaster/orm/fixtures/custom.xml". The new updates to the Toaster Manual 2.4 has information about this in the just-completed "Customize Toaster" section. >> >> - David >> >> -----Original Message----- >> >> From:toaster-bounces@yoctoproject.org >> <mailto:toaster-bounces@yoctoproject.org> [mailto:toaster-bounces@yoctoproject.org] On Behalf Of Stéphane Ancelot >> >> Sent: Monday, October 16, 2017 12:52 AM >> >> To:toaster@yoctoproject.org <mailto:toaster@yoctoproject.org> >> >> Subject: [Toaster] import a layer directory problem >> >> hi, >> >> I have got some problems trying to import a layer : >> >> I first copied the meta-skeleton layer in a directory named test (inside the OS running toaster) >> >> then in toaster, I setted the pathname of my layer directory. >> >> I can sea my layer name in available layers , but inside there is no summary/description/recipes available ....like it was not added.... >> >> Regards, >> >> Stéphane ANCELOT >> >> -- >> >> _______________________________________________ >> >> toaster mailing list >> >> toaster@yoctoproject.org <mailto:toaster@yoctoproject.org> >> >> https://lists.yoctoproject.org/listinfo/toaster >> >> >> >> > > > [-- Attachment #2: Type: text/html, Size: 14040 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-10-19 10:18 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-10-16 7:52 import a layer directory problem Stéphane Ancelot 2017-10-16 9:03 ` Reyna, David 2017-10-16 12:08 ` Stéphane Ancelot 2017-10-16 14:49 ` Stéphane Ancelot 2017-10-16 17:27 ` Reyna, David 2017-10-17 7:48 ` Stéphane Ancelot 2017-10-19 10:18 ` Stéphane Ancelot
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).