From: Zhengxun Li <zhengxunli@mxic.com.tw> To: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org Cc: tudor.ambarus@microchip.com, p.yadav@ti.com, miquel.raynal@bootlin.com, broonie@kernel.org, jaimeliao@mxic.com.tw, Zhengxun Li <zhengxunli@mxic.com.tw> Subject: [PATCH v5 2/2] spi: mxic: patch for octal DTR mode support Date: Mon, 17 May 2021 14:14:48 +0800 [thread overview] Message-ID: <1621232088-12567-3-git-send-email-zhengxunli@mxic.com.tw> (raw) In-Reply-To: <1621232088-12567-1-git-send-email-zhengxunli@mxic.com.tw> Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr _supports_op()" add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> --- drivers/spi/spi-mxic.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 96b4182..32e757a 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf, static bool mxic_spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { - if (op->data.buswidth > 4 || op->addr.buswidth > 4 || - op->dummy.buswidth > 4 || op->cmd.buswidth > 4) + bool all_false; + + if (op->data.buswidth > 8 || op->addr.buswidth > 8 || + op->dummy.buswidth > 8 || op->cmd.buswidth > 8) return false; if (op->data.nbytes && op->dummy.nbytes && @@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem, if (op->addr.nbytes > 7) return false; - return spi_mem_default_supports_op(mem, op); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && + !op->data.dtr; + + if (all_false) + return spi_mem_default_supports_op(mem, op); + else + return spi_mem_dtr_supports_op(mem, op); } static int mxic_spi_mem_exec_op(struct spi_mem *mem, @@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master); int nio = 1, i, ret; u32 ss_ctrl; - u8 addr[8]; - u8 opcode = op->cmd.opcode; + u8 addr[8], cmd[2]; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) return ret; - if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) + if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) + nio = 8; + else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) nio = 4; else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) nio = 2; @@ -374,19 +383,25 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, mxic->regs + HC_CFG); writel(HC_EN_BIT, mxic->regs + HC_EN); - ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1); + ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) | + OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) | + (op->cmd.dtr ? OP_CMD_DDR : 0); if (op->addr.nbytes) ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) | - OP_ADDR_BUSW(fls(op->addr.buswidth) - 1); + OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) | + (op->addr.dtr ? OP_ADDR_DDR : 0); if (op->dummy.nbytes) ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes); if (op->data.nbytes) { - ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1); + ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) | + (op->data.dtr ? OP_DATA_DDR : 0); if (op->data.dir == SPI_MEM_DATA_IN) ss_ctrl |= OP_READ; + if (op->data.dtr) + ss_ctrl |= OP_DQS_EN; } writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select)); @@ -394,7 +409,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); + for (i = 0; i < op->cmd.nbytes; i++) + cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1)); + + ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes); if (ret) goto out; @@ -567,7 +585,8 @@ static int mxic_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_TX_DUAL | - SPI_RX_QUAD | SPI_TX_QUAD; + SPI_RX_QUAD | SPI_TX_QUAD | + SPI_RX_OCTAL | SPI_TX_OCTAL; mxic_spi_hw_init(mxic); -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Zhengxun Li <zhengxunli@mxic.com.tw> To: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org Cc: tudor.ambarus@microchip.com, p.yadav@ti.com, miquel.raynal@bootlin.com, broonie@kernel.org, jaimeliao@mxic.com.tw, Zhengxun Li <zhengxunli@mxic.com.tw> Subject: [PATCH v5 2/2] spi: mxic: patch for octal DTR mode support Date: Mon, 17 May 2021 14:14:48 +0800 [thread overview] Message-ID: <1621232088-12567-3-git-send-email-zhengxunli@mxic.com.tw> (raw) In-Reply-To: <1621232088-12567-1-git-send-email-zhengxunli@mxic.com.tw> Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr _supports_op()" add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> --- drivers/spi/spi-mxic.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 96b4182..32e757a 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf, static bool mxic_spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { - if (op->data.buswidth > 4 || op->addr.buswidth > 4 || - op->dummy.buswidth > 4 || op->cmd.buswidth > 4) + bool all_false; + + if (op->data.buswidth > 8 || op->addr.buswidth > 8 || + op->dummy.buswidth > 8 || op->cmd.buswidth > 8) return false; if (op->data.nbytes && op->dummy.nbytes && @@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem, if (op->addr.nbytes > 7) return false; - return spi_mem_default_supports_op(mem, op); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && + !op->data.dtr; + + if (all_false) + return spi_mem_default_supports_op(mem, op); + else + return spi_mem_dtr_supports_op(mem, op); } static int mxic_spi_mem_exec_op(struct spi_mem *mem, @@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master); int nio = 1, i, ret; u32 ss_ctrl; - u8 addr[8]; - u8 opcode = op->cmd.opcode; + u8 addr[8], cmd[2]; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) return ret; - if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) + if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) + nio = 8; + else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) nio = 4; else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) nio = 2; @@ -374,19 +383,25 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, mxic->regs + HC_CFG); writel(HC_EN_BIT, mxic->regs + HC_EN); - ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1); + ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) | + OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) | + (op->cmd.dtr ? OP_CMD_DDR : 0); if (op->addr.nbytes) ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) | - OP_ADDR_BUSW(fls(op->addr.buswidth) - 1); + OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) | + (op->addr.dtr ? OP_ADDR_DDR : 0); if (op->dummy.nbytes) ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes); if (op->data.nbytes) { - ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1); + ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) | + (op->data.dtr ? OP_DATA_DDR : 0); if (op->data.dir == SPI_MEM_DATA_IN) ss_ctrl |= OP_READ; + if (op->data.dtr) + ss_ctrl |= OP_DQS_EN; } writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select)); @@ -394,7 +409,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); + for (i = 0; i < op->cmd.nbytes; i++) + cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1)); + + ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes); if (ret) goto out; @@ -567,7 +585,8 @@ static int mxic_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_TX_DUAL | - SPI_RX_QUAD | SPI_TX_QUAD; + SPI_RX_QUAD | SPI_TX_QUAD | + SPI_RX_OCTAL | SPI_TX_OCTAL; mxic_spi_hw_init(mxic); -- 1.9.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-05-17 6:16 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-17 6:14 [PATCH v5 0/2] Add octal DTR support for Macronix flash Zhengxun Li 2021-05-17 6:14 ` Zhengxun Li 2021-05-17 6:14 ` [PATCH v5 1/2] mtd: spi-nor: macronix: add support for Macronix octaflash Zhengxun Li 2021-05-17 6:14 ` Zhengxun Li 2021-05-17 7:33 ` Pratyush Yadav 2021-05-17 7:33 ` Pratyush Yadav 2021-06-29 2:06 ` zhengxunli 2021-06-29 2:06 ` zhengxunli 2021-06-29 6:37 ` Tudor.Ambarus 2021-06-29 6:37 ` Tudor.Ambarus 2021-06-29 9:33 ` zhengxunli 2021-06-29 9:33 ` zhengxunli 2021-06-30 9:03 ` zhengxunli 2021-06-30 9:03 ` zhengxunli 2021-05-17 6:14 ` Zhengxun Li [this message] 2021-05-17 6:14 ` [PATCH v5 2/2] spi: mxic: patch for octal DTR mode support Zhengxun Li 2021-05-17 15:49 ` Mark Brown 2021-05-17 15:49 ` Mark Brown 2021-05-17 16:06 ` Pratyush Yadav 2021-05-17 16:06 ` Pratyush Yadav 2021-05-18 2:47 ` zhengxunli 2021-05-18 2:47 ` zhengxunli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1621232088-12567-3-git-send-email-zhengxunli@mxic.com.tw \ --to=zhengxunli@mxic.com.tw \ --cc=broonie@kernel.org \ --cc=jaimeliao@mxic.com.tw \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-spi@vger.kernel.org \ --cc=miquel.raynal@bootlin.com \ --cc=p.yadav@ti.com \ --cc=tudor.ambarus@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.