[PATCH v2 0/3] arm64: dts: add FlexCAN support to LS1028A and sl28

[PATCH v2 0/3] arm64: dts: add FlexCAN support to LS1028A and sl28

[Michael Walle]

Now that FlexCAN support for newer IPs is finally hitting upstream [1],
lets add the corresponding nodes for the LS1028A SoC and enable it for the
Kontron sl28 board.

changes since v1:
 - added new patch "dt-bindings: can: flexcan: list supported processors"
   Suggested by Lee.

   Please keep in mind that this only an intermediate step, as Marc already
   pointed out [2] that Oleksij is alreay working on converting the
   bindings to YAML format.

[1] https://lore.kernel.org/netdev/20200923085418.2685858-1-mkl@pengutronix.de/
[2] https://lore.kernel.org/linux-can/790ce102-7542-b65e-0945-a04faf6e4b89@pengutronix.de/

Michael Walle (3):
  dt-bindings: can: flexcan: list supported processors
  arm64: dts: ls1028a: add missing CAN nodes
  arm64: dts: freescale: sl28: add CAN node

 .../bindings/net/can/fsl-flexcan.txt           |  6 ++++++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
 3 files changed, 28 insertions(+)

-- 
2.20.1

[PATCH v2 0/3] arm64: dts: add FlexCAN support to LS1028A and sl28

[Michael Walle]

Now that FlexCAN support for newer IPs is finally hitting upstream [1],
lets add the corresponding nodes for the LS1028A SoC and enable it for the
Kontron sl28 board.

changes since v1:
 - added new patch "dt-bindings: can: flexcan: list supported processors"
   Suggested by Lee.

   Please keep in mind that this only an intermediate step, as Marc already
   pointed out [2] that Oleksij is alreay working on converting the
   bindings to YAML format.

[1] https://lore.kernel.org/netdev/20200923085418.2685858-1-mkl@pengutronix.de/
[2] https://lore.kernel.org/linux-can/790ce102-7542-b65e-0945-a04faf6e4b89@pengutronix.de/

Michael Walle (3):
  dt-bindings: can: flexcan: list supported processors
  arm64: dts: ls1028a: add missing CAN nodes
  arm64: dts: freescale: sl28: add CAN node

 .../bindings/net/can/fsl-flexcan.txt           |  6 ++++++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
 3 files changed, 28 insertions(+)

-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors

[Michael Walle]

The compatible is a pattern match. Explicitly list all possible values.
Also mention that the ls1028ar1 must be followed by lx2160ar1.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
index 94c0f8bf4deb..c6152dc2d2d0 100644
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -4,6 +4,12 @@ Required properties:
 
 - compatible : Should be "fsl,<processor>-flexcan"
 
+  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
+  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
+
+  The ls1028ar1 must be followed by lx2160ar1, e.g.
+   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
+
   An implementation should also claim any of the following compatibles
   that it is fully backwards compatible with:
 
-- 
2.20.1

[PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors

[Michael Walle]

The compatible is a pattern match. Explicitly list all possible values.
Also mention that the ls1028ar1 must be followed by lx2160ar1.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
index 94c0f8bf4deb..c6152dc2d2d0 100644
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
@@ -4,6 +4,12 @@ Required properties:
 
 - compatible : Should be "fsl,<processor>-flexcan"
 
+  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
+  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
+
+  The ls1028ar1 must be followed by lx2160ar1, e.g.
+   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
+
   An implementation should also claim any of the following compatibles
   that it is fully backwards compatible with:
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1530 bytes --]

On 10/1/20 11:11 AM, Michael Walle wrote:
> The compatible is a pattern match. Explicitly list all possible values.
> Also mention that the ls1028ar1 must be followed by lx2160ar1.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> index 94c0f8bf4deb..c6152dc2d2d0 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -4,6 +4,12 @@ Required properties:
>  
>  - compatible : Should be "fsl,<processor>-flexcan"
>  
> +  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> +  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> +
> +  The ls1028ar1 must be followed by lx2160ar1, e.g.
> +   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> +
>    An implementation should also claim any of the following compatibles
>    that it is fully backwards compatible with:
>  
> 

Added this patch to linux-can-next. The others should probably go via the arm
SoC tree.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v2 1/3] dt-bindings: can: flexcan: list supported processors

[Marc Kleine-Budde]

[-- Attachment #1.1.1: Type: text/plain, Size: 1530 bytes --]

On 10/1/20 11:11 AM, Michael Walle wrote:
> The compatible is a pattern match. Explicitly list all possible values.
> Also mention that the ls1028ar1 must be followed by lx2160ar1.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> index 94c0f8bf4deb..c6152dc2d2d0 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -4,6 +4,12 @@ Required properties:
>  
>  - compatible : Should be "fsl,<processor>-flexcan"
>  
> +  where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> +  vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> +
> +  The ls1028ar1 must be followed by lx2160ar1, e.g.
> +   - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> +
>    An implementation should also claim any of the following compatibles
>    that it is fully backwards compatible with:
>  
> 

Added this patch to linux-can-next. The others should probably go via the arm
SoC tree.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/3] arm64: dts: ls1028a: add missing CAN nodes

[Michael Walle]

The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.

The first controller was tested on the Kontron sl28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 73e4f9466887..f223396b8266 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -386,6 +386,24 @@
 			status = "disabled";
 		};
 
+		can0: can@2180000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-- 
2.20.1

[PATCH v2 2/3] arm64: dts: ls1028a: add missing CAN nodes

[Michael Walle]

The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.

The first controller was tested on the Kontron sl28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 73e4f9466887..f223396b8266 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -386,6 +386,24 @@
 			status = "disabled";
 		};
 
+		can0: can@2180000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/3] arm64: dts: ls1028a: add missing CAN nodes

[Shawn Guo]

On Thu, Oct 01, 2020 at 11:11:30AM +0200, Michael Walle wrote:
> The LS1028A has two FlexCAN controller. These are compatible with
> the ones from the LX2160A. Add the nodes.
> 
> The first controller was tested on the Kontron sl28 board.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied, thanks.

Re: [PATCH v2 2/3] arm64: dts: ls1028a: add missing CAN nodes

[Shawn Guo]

On Thu, Oct 01, 2020 at 11:11:30AM +0200, Michael Walle wrote:
> The LS1028A has two FlexCAN controller. These are compatible with
> the ones from the LX2160A. Add the nodes.
> 
> The first controller was tested on the Kontron sl28 board.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/3] arm64: dts: freescale: sl28: add CAN node

[Michael Walle]

The module supports one CAN controller. Enable it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index f46eb47cfa4d..17a2f5dacc3f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -60,6 +60,10 @@
 	};
 };
 
+&can0 {
+	status = "okay";
+};
+
 &dspi2 {
 	status = "okay";
 };
-- 
2.20.1

[PATCH v2 3/3] arm64: dts: freescale: sl28: add CAN node

[Michael Walle]

The module supports one CAN controller. Enable it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index f46eb47cfa4d..17a2f5dacc3f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -60,6 +60,10 @@
 	};
 };
 
+&can0 {
+	status = "okay";
+};
+
 &dspi2 {
 	status = "okay";
 };
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/3] arm64: dts: freescale: sl28: add CAN node

[Shawn Guo]

On Thu, Oct 01, 2020 at 11:11:31AM +0200, Michael Walle wrote:
> The module supports one CAN controller. Enable it.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied, thanks.

Re: [PATCH v2 3/3] arm64: dts: freescale: sl28: add CAN node

[Shawn Guo]

On Thu, Oct 01, 2020 at 11:11:31AM +0200, Michael Walle wrote:
> The module supports one CAN controller. Enable it.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel