From: Rafal Prylowski <prylowski@metasoft.pl> To: linux-ide@vger.kernel.org Cc: bzolnier@gmail.com, hsweeten@visionengravers.com, ryan@bluewatersys.com, sshtylyov@ru.montavista.com, joao.ramos@inov.pt, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: [PATCH 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU Date: Thu, 29 Mar 2012 10:10:15 +0200 [thread overview] Message-ID: <4F7418E7.4060500@metasoft.pl> (raw) Hi. The following patchset adds support for IDE interface controller found on Cirrus Logic's EP931x CPUs. It is based on an earlier work done by Alessandro Zummo, Lennert Buytenhek, Joao Ramos and Bartlomiej Zolnierkiewicz. I tried to take the best parts of code from previous attempts for inclusion and added dma support. The driver is working correctly in both PIO and DMA mode (with exception that it could give timeouts in DMA mode occasionally - the problem has been solved by me and solution proposed to LAKML; it's not related to this driver, but DMA/interrupt handling of ep93xx IMHO). I'm not sure about correctness of the following in the driver: - module copyrights/authorship - I just added all copyrights of the earlier drivers and MODULE_AUTHOR macro lists their authors, - timeout in IORDY polling (how long to wait for IORDY?), - GPIO/IDE pin muxing - I hope it's done in a way acceptable for ep93xx maintainers (patch 2/3). I would like for the driver to refuse loading when muxing is wrong (first commented out lines of ep93xx_pata_probe, patch 1/3), but some api is needed as raw access to SYSCON register is prohibited in drivers. Patchset is against current mainline kernel. Regards, RP [PATCH 1/3] PATA host controller driver for ep93xx [PATCH 2/3] ep93xx: IDE driver platform support code [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards arch/arm/mach-ep93xx/core.c | 36 arch/arm/mach-ep93xx/edb93xx.c | 23 arch/arm/mach-ep93xx/include/mach/platform.h | 1 arch/arm/mach-ep93xx/soc.h | 1 drivers/ata/Kconfig | 9 drivers/ata/Makefile | 1 drivers/ata/pata_ep93xx.c | 949 +++++++++++++++++ 7 files changed, 1020 insertions(+)
WARNING: multiple messages have this Message-ID (diff)
From: prylowski@metasoft.pl (Rafal Prylowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU Date: Thu, 29 Mar 2012 10:10:15 +0200 [thread overview] Message-ID: <4F7418E7.4060500@metasoft.pl> (raw) Hi. The following patchset adds support for IDE interface controller found on Cirrus Logic's EP931x CPUs. It is based on an earlier work done by Alessandro Zummo, Lennert Buytenhek, Joao Ramos and Bartlomiej Zolnierkiewicz. I tried to take the best parts of code from previous attempts for inclusion and added dma support. The driver is working correctly in both PIO and DMA mode (with exception that it could give timeouts in DMA mode occasionally - the problem has been solved by me and solution proposed to LAKML; it's not related to this driver, but DMA/interrupt handling of ep93xx IMHO). I'm not sure about correctness of the following in the driver: - module copyrights/authorship - I just added all copyrights of the earlier drivers and MODULE_AUTHOR macro lists their authors, - timeout in IORDY polling (how long to wait for IORDY?), - GPIO/IDE pin muxing - I hope it's done in a way acceptable for ep93xx maintainers (patch 2/3). I would like for the driver to refuse loading when muxing is wrong (first commented out lines of ep93xx_pata_probe, patch 1/3), but some api is needed as raw access to SYSCON register is prohibited in drivers. Patchset is against current mainline kernel. Regards, RP [PATCH 1/3] PATA host controller driver for ep93xx [PATCH 2/3] ep93xx: IDE driver platform support code [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards arch/arm/mach-ep93xx/core.c | 36 arch/arm/mach-ep93xx/edb93xx.c | 23 arch/arm/mach-ep93xx/include/mach/platform.h | 1 arch/arm/mach-ep93xx/soc.h | 1 drivers/ata/Kconfig | 9 drivers/ata/Makefile | 1 drivers/ata/pata_ep93xx.c | 949 +++++++++++++++++ 7 files changed, 1020 insertions(+)
next reply other threads:[~2012-03-29 8:10 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-03-29 8:10 Rafal Prylowski [this message] 2012-03-29 8:10 ` [PATCH 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU Rafal Prylowski 2012-03-29 8:17 ` [PATCH 1/3] PATA host controller driver for ep93xx Rafal Prylowski 2012-03-29 8:17 ` Rafal Prylowski 2012-03-29 17:25 ` H Hartley Sweeten 2012-03-29 17:25 ` H Hartley Sweeten 2012-03-30 8:13 ` Rafal Prylowski 2012-03-30 8:13 ` Rafal Prylowski 2012-03-29 22:21 ` Ryan Mallon 2012-03-29 22:21 ` Ryan Mallon 2012-03-30 10:13 ` Rafal Prylowski 2012-03-30 10:13 ` Rafal Prylowski 2012-03-29 22:24 ` Ryan Mallon 2012-03-29 22:24 ` Ryan Mallon 2012-03-30 8:19 ` Rafal Prylowski 2012-03-30 8:19 ` Rafal Prylowski 2012-03-30 20:18 ` Arnd Bergmann 2012-03-30 20:18 ` Arnd Bergmann 2012-04-02 7:52 ` Rafal Prylowski 2012-04-02 7:52 ` Rafal Prylowski 2012-04-02 8:08 ` Arnd Bergmann 2012-04-02 8:08 ` Arnd Bergmann 2012-04-02 9:28 ` Rafal Prylowski 2012-04-02 9:28 ` Rafal Prylowski 2012-04-02 10:24 ` Arnd Bergmann 2012-04-02 10:24 ` Arnd Bergmann 2012-04-03 1:50 ` Ryan Mallon 2012-04-03 1:50 ` Ryan Mallon 2012-04-03 7:41 ` Arnd Bergmann 2012-04-03 7:41 ` Arnd Bergmann 2012-03-29 8:19 ` [PATCH 2/3] ep93xx: IDE driver platform support code Rafal Prylowski 2012-03-29 8:19 ` Rafal Prylowski 2012-03-29 16:26 ` H Hartley Sweeten 2012-03-29 16:26 ` H Hartley Sweeten 2012-03-30 8:29 ` Rafal Prylowski 2012-03-30 8:29 ` Rafal Prylowski 2012-03-29 8:20 ` [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards Rafal Prylowski 2012-03-29 8:20 ` Rafal Prylowski 2012-03-29 16:32 ` H Hartley Sweeten 2012-03-29 16:32 ` H Hartley Sweeten 2012-03-30 8:32 ` Rafal Prylowski 2012-03-30 8:32 ` Rafal Prylowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4F7418E7.4060500@metasoft.pl \ --to=prylowski@metasoft.pl \ --cc=bzolnier@gmail.com \ --cc=hsweeten@visionengravers.com \ --cc=joao.ramos@inov.pt \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-ide@vger.kernel.org \ --cc=ryan@bluewatersys.com \ --cc=sshtylyov@ru.montavista.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.