All of lore.kernel.org
 help / color / mirror / Atom feed
From: "A.s. Dong" <aisheng.dong@nxp.com>
To: Stephen Boyd <sboyd@kernel.org>,
	"linux-clk@vger.kernel.org" <linux-clk@vger.kernel.org>
Cc: "linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"mturquette@baylibre.com" <mturquette@baylibre.com>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>
Subject: RE: [PATCH V4 03/11] clk: imx: scu: add scu clock divider
Date: Thu, 18 Oct 2018 02:35:34 +0000	[thread overview]
Message-ID: <AM0PR04MB4211A124CF43AF4291BA688780F80@AM0PR04MB4211.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <153979235107.5275.17099119584473464472@swboyd.mtv.corp.google.com>

> -----Original Message-----
> From: Stephen Boyd [mailto:sboyd@kernel.org]
> Sent: Thursday, October 18, 2018 12:06 AM
> Quoting A.s. Dong (2018-10-17 08:45:05)
> > > -----Original Message-----
> > > From: Stephen Boyd [mailto:sboyd@kernel.org]
> > > Sent: Wednesday, October 17, 2018 11:17 PM Quoting A.s. Dong
> > > (2018-10-17 01:56:35)
> > > > > From: Stephen Boyd [mailto:sboyd@kernel.org]
> > > > > Sent: Wednesday, October 17, 2018 5:26 AM Quoting A.s. Dong
> > > > > (2018-10-14 01:07:49)
> > > >
> > > > How about do something like below?
> > > > struct req_get_clock_rate {
> > > >         u16 resource;
> > > >         u8 clk;
> > > > } __packed;
> > > >
> > > > struct resp_get_clock_rate {
> > > >         u32 rate;
> > > > } __packed;
> > >
> > > This doesn't need __packed because it's a single u32.
> > >
> >
> > It's a safe writing, but yes, can be removed.
> >
> > > >
> > > > struct imx_sc_msg_get_clock_rate {
> > > >         struct imx_sc_rpc_msg hdr;
> > > >         union {
> > > >                 struct req_get_clock_rate req;
> > > >                 struct resp_get_clock_rate resp;
> > > >         } data;
> > > > } __packed;
> > > >
> > >
> > > Yes something like this would be best. And now I wonder if
> > > imx_scu_call_rpc() is doing endianness swapping? Or does it copy
> > > data into these response structures? I'm saying that the u32/16/8
> > > may need to be
> > > __le32/16/8 and then have the proper accessors.
> > >
> >
> > No endianness swapping. It's fixed little endian.
> > SCU protocol isn't aware of these structures. The structures are
> > defined according to SCU protocol definition to make sure each field
> > position and size are correct. Then SCU IPC driver just send and receive them
> sequentially.
> > Client driver uses the structures to retrieve the responding filed values.
> >
> > We do this like drivers/firmware/ti_sci.h Do you think we still need
> > specify __le32/16/8 for this case?
> 
> Probably, because the CPU in linux could be big endian or little endian.
> It doesn't hurt to do it right to begin with and then you get the support for free
> if it's ever used later on.
> 

All right for me. Thanks for the suggestion.

Regards
Dong Aisheng

WARNING: multiple messages have this Message-ID (diff)
From: aisheng.dong@nxp.com (A.s. Dong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 03/11] clk: imx: scu: add scu clock divider
Date: Thu, 18 Oct 2018 02:35:34 +0000	[thread overview]
Message-ID: <AM0PR04MB4211A124CF43AF4291BA688780F80@AM0PR04MB4211.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <153979235107.5275.17099119584473464472@swboyd.mtv.corp.google.com>

> -----Original Message-----
> From: Stephen Boyd [mailto:sboyd at kernel.org]
> Sent: Thursday, October 18, 2018 12:06 AM
> Quoting A.s. Dong (2018-10-17 08:45:05)
> > > -----Original Message-----
> > > From: Stephen Boyd [mailto:sboyd at kernel.org]
> > > Sent: Wednesday, October 17, 2018 11:17 PM Quoting A.s. Dong
> > > (2018-10-17 01:56:35)
> > > > > From: Stephen Boyd [mailto:sboyd at kernel.org]
> > > > > Sent: Wednesday, October 17, 2018 5:26 AM Quoting A.s. Dong
> > > > > (2018-10-14 01:07:49)
> > > >
> > > > How about do something like below?
> > > > struct req_get_clock_rate {
> > > >         u16 resource;
> > > >         u8 clk;
> > > > } __packed;
> > > >
> > > > struct resp_get_clock_rate {
> > > >         u32 rate;
> > > > } __packed;
> > >
> > > This doesn't need __packed because it's a single u32.
> > >
> >
> > It's a safe writing, but yes, can be removed.
> >
> > > >
> > > > struct imx_sc_msg_get_clock_rate {
> > > >         struct imx_sc_rpc_msg hdr;
> > > >         union {
> > > >                 struct req_get_clock_rate req;
> > > >                 struct resp_get_clock_rate resp;
> > > >         } data;
> > > > } __packed;
> > > >
> > >
> > > Yes something like this would be best. And now I wonder if
> > > imx_scu_call_rpc() is doing endianness swapping? Or does it copy
> > > data into these response structures? I'm saying that the u32/16/8
> > > may need to be
> > > __le32/16/8 and then have the proper accessors.
> > >
> >
> > No endianness swapping. It's fixed little endian.
> > SCU protocol isn't aware of these structures. The structures are
> > defined according to SCU protocol definition to make sure each field
> > position and size are correct. Then SCU IPC driver just send and receive them
> sequentially.
> > Client driver uses the structures to retrieve the responding filed values.
> >
> > We do this like drivers/firmware/ti_sci.h Do you think we still need
> > specify __le32/16/8 for this case?
> 
> Probably, because the CPU in linux could be big endian or little endian.
> It doesn't hurt to do it right to begin with and then you get the support for free
> if it's ever used later on.
> 

All right for me. Thanks for the suggestion.

Regards
Dong Aisheng

  reply	other threads:[~2018-10-18  2:35 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-14  8:07 [PATCH V4 00/11] clk: imx: add imx8qxp clock support A.s. Dong
2018-10-14  8:07 ` A.s. Dong
2018-10-14  8:07 ` [PATCH V4 01/11] clk: imx: add configuration option for mmio clks A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-14  8:07 ` [PATCH V4 02/11] clk: imx: scu: add scu clock common part A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-16 21:31   ` Stephen Boyd
2018-10-16 21:31     ` Stephen Boyd
2018-10-17  9:11     ` A.s. Dong
2018-10-17  9:11       ` A.s. Dong
2018-10-17 15:07       ` Stephen Boyd
2018-10-17 15:07         ` Stephen Boyd
2018-10-17 15:27         ` A.s. Dong
2018-10-17 15:27           ` A.s. Dong
2018-10-14  8:07 ` [PATCH V4 03/11] clk: imx: scu: add scu clock divider A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-16 21:26   ` Stephen Boyd
2018-10-16 21:26     ` Stephen Boyd
2018-10-17  8:56     ` A.s. Dong
2018-10-17  8:56       ` A.s. Dong
2018-10-17 15:17       ` Stephen Boyd
2018-10-17 15:17         ` Stephen Boyd
2018-10-17 15:45         ` A.s. Dong
2018-10-17 15:45           ` A.s. Dong
2018-10-17 16:05           ` Stephen Boyd
2018-10-17 16:05             ` Stephen Boyd
2018-10-18  2:35             ` A.s. Dong [this message]
2018-10-18  2:35               ` A.s. Dong
2018-10-14  8:07 ` [PATCH V4 04/11] clk: imx: scu: add scu clock gpr divider A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-16 21:27   ` Stephen Boyd
2018-10-16 21:27     ` Stephen Boyd
2018-10-17  9:03     ` A.s. Dong
2018-10-17  9:03       ` A.s. Dong
2018-10-17 15:17       ` Stephen Boyd
2018-10-17 15:17         ` Stephen Boyd
2018-10-14  8:07 ` [PATCH V4 05/11] clk: imx: scu: add scu clock gate A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-15  7:32   ` Sascha Hauer
2018-10-15  7:32     ` Sascha Hauer
2018-10-15  9:17     ` A.s. Dong
2018-10-15  9:17       ` A.s. Dong
2018-10-15  9:53       ` Sascha Hauer
2018-10-15  9:53         ` Sascha Hauer
2018-10-15 15:30         ` A.s. Dong
2018-10-15 15:30           ` A.s. Dong
2018-10-16 21:18           ` Stephen Boyd
2018-10-16 21:18             ` Stephen Boyd
2018-10-17  7:28             ` A.s. Dong
2018-10-17  7:28               ` A.s. Dong
2018-10-14  8:07 ` [PATCH V4 06/11] clk: imx: scu: add scu clock gpr gate A.s. Dong
2018-10-14  8:07   ` A.s. Dong
2018-10-14  8:08 ` [PATCH V4 07/11] clk: imx: scu: add scu clock mux A.s. Dong
2018-10-14  8:08   ` A.s. Dong
2018-10-14  8:08 ` [PATCH V4 08/11] clk: imx: scu: add scu clock gpr mux A.s. Dong
2018-10-14  8:08   ` A.s. Dong
2018-10-16 21:30   ` Stephen Boyd
2018-10-16 21:30     ` Stephen Boyd
2018-10-17  9:07     ` A.s. Dong
2018-10-17  9:07       ` A.s. Dong
2018-10-17 15:18       ` Stephen Boyd
2018-10-17 15:18         ` Stephen Boyd
2018-10-14  8:08 ` [PATCH V4 09/11] clk: imx: add common imx_clk_hw_fixed functions A.s. Dong
2018-10-14  8:08   ` A.s. Dong
2018-10-16 21:32   ` Stephen Boyd
2018-10-16 21:32     ` Stephen Boyd
2018-10-17  9:21     ` A.s. Dong
2018-10-17  9:21       ` A.s. Dong
2018-10-17 15:18       ` Stephen Boyd
2018-10-17 15:18         ` Stephen Boyd
2018-10-14  8:08 ` [PATCH V4 10/11] clk: imx: add imx_check_clk_hws helper function A.s. Dong
2018-10-14  8:08   ` A.s. Dong
2018-10-16 21:34   ` Stephen Boyd
2018-10-16 21:34     ` Stephen Boyd
2018-10-17  9:24     ` A.s. Dong
2018-10-17  9:24       ` A.s. Dong
2018-10-14  8:08 ` [PATCH V4 11/11] clk: imx: add imx8qxp clk driver A.s. Dong
2018-10-14  8:08   ` A.s. Dong
2018-10-16 21:38   ` Stephen Boyd
2018-10-16 21:38     ` Stephen Boyd
2018-10-17  9:43     ` A.s. Dong
2018-10-17  9:43       ` A.s. Dong
2018-10-17 15:20       ` Stephen Boyd
2018-10-17 15:20         ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM0PR04MB4211A124CF43AF4291BA688780F80@AM0PR04MB4211.eurprd04.prod.outlook.com \
    --to=aisheng.dong@nxp.com \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.