All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Summers <beagleboard@davidjohnsummers.uk>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
	linux-bluetooth@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	frowand.list@gmail.com, linux-arm-kernel@lists.infradead.org,
	Johan Hedberg <johan.hedberg@gmail.com>
Subject: Re: [PATCH v3 3/3] arm: dts: rk3288-tinker.dtsi: Add outline Bluetooth support
Date: Mon, 11 Mar 2019 20:48:17 +0000	[thread overview]
Message-ID: <f4cee9a8-8ff5-52f8-7170-d78b6917ca74@davidjohnsummers.uk> (raw)
In-Reply-To: <C67B8798-ACD1-470B-B69A-650A62AE7982@holtmann.org>

Hi Marcel,

On 11/03/2019 16:41, Marcel Holtmann wrote:
> Hi David,
>
>> This patch is an outline for bluetooth on the ASUS Tinker Board (S).
>>
>> Bluetooth is provided my RTL8723BS on these machine, and this is wired
>> into UART0.
>>
>> Here this is performed as a SerDev device.
>>
>> Now as presented, this does not give functioning bluetooth. The
>> updates needed to the device driver:
>>
>> https://www.spinics.net/lists/linux-bluetooth/msg78661.html
>>
>> Haven't yet been accepted. So this device tree hook doesn't yet have
>> "realtek,rtl8723bs-bt" compatible flag.
>>
>> It is however still submitted as a patch, as it sets the UART up
>> correctly. And so basic communciation can be had with the device. This
>> has been confirmed by Tony McKahan @ Armbian, in particular that the
>> CTS/RTS is needed.
>>
>> When Vasily patch is accepted, this will be added as a minor patch on
>> top of this patch; as this patch gives the pins needed.
>>
>> The one oddity, is the RESET pin, it is labeled this way on the
>> schematic. However the hci_h5.c driver calls this ENABLE. Here we have
>> stuck with the schematic name.
>>
>> Signed-off-by: David Summers <beagleboard@davidjohnsummers.uk>
>> ---
>> arch/arm/boot/dts/rk3288-tinker.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> index 0ffab1b7c940..d29f5b34d7e6 100644
>> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
>> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> @@ -486,6 +486,17 @@
>>
>> &uart0 {
>> 	status = "okay";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
>> +
>> +	bluetooth {
>> +		clocks = <&rk808 RK808_CLKOUT1>;
>> +		reset-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
>> +		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
>> +		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
>> +		vcc-18-supply = <&vcc_18>;
>> +		vcc-io-supply = <&vcc_io>;
>> +	};
>> };
> I need an ACK from Rob for this and also you might want to send the whole series for me to review in full context.
>
> Regards
>
> Marcel
>
Yes happy to wait for ACK from Rob. Of the 3 patches done this is the 
least urgent, as Bluetooth is currently non functioning on these 
machines, so delay in this doesn't change the status quo. Patch 3 is 
self standing, e.g. not applying it doesn't affect the other two. 
However patch 3 probably has to be applied sequentially after patches 
1&2 as all are on the single file.

Following on from Robs comments on last patch sent adding bluetooth, 
I've made this one FAR more detailed. That said though the drivers for 
bluetooth in this case doesn't use clock or supply ASAIK. Most things 
are brought up by the wifi part of the device tree which was patch 2. 
However adding to the bluetooth device tree as well, at least leaves the 
option open to a user just loading bluetooth, and not wifi.

The one thing missing from this bluetooth device tree, is explaining 
which pins need to be pulled to bring up the card. This is part be 
design (the tinker board and rt8723bs both have bad public documentation 
- so exact operation is hard to guess ...); but also because I couldn't 
see a way of getting a SerDev device to pull pins on loading, unlike 
sdio (used for wifi).

Full series:

Part 1 - device tree changes for sd card
Part 2 - adding wifi to the device tree
Part 3 - adding outline bluetooth

So are each fairly self standing. However if interested in parts 1 and 2 
they can be found:

http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023330.html
http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023331.html

Regards, and yes happy to wait and see what Rob has to say.

David.

WARNING: multiple messages have this Message-ID (diff)
From: David Summers <beagleboard@davidjohnsummers.uk>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	frowand.list@gmail.com, Johan Hedberg <johan.hedberg@gmail.com>,
	anarsoul@gmail.com, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH v3 3/3] arm: dts: rk3288-tinker.dtsi: Add outline Bluetooth support
Date: Mon, 11 Mar 2019 20:48:17 +0000	[thread overview]
Message-ID: <f4cee9a8-8ff5-52f8-7170-d78b6917ca74@davidjohnsummers.uk> (raw)
In-Reply-To: <C67B8798-ACD1-470B-B69A-650A62AE7982@holtmann.org>

Hi Marcel,

On 11/03/2019 16:41, Marcel Holtmann wrote:
> Hi David,
>
>> This patch is an outline for bluetooth on the ASUS Tinker Board (S).
>>
>> Bluetooth is provided my RTL8723BS on these machine, and this is wired
>> into UART0.
>>
>> Here this is performed as a SerDev device.
>>
>> Now as presented, this does not give functioning bluetooth. The
>> updates needed to the device driver:
>>
>> https://www.spinics.net/lists/linux-bluetooth/msg78661.html
>>
>> Haven't yet been accepted. So this device tree hook doesn't yet have
>> "realtek,rtl8723bs-bt" compatible flag.
>>
>> It is however still submitted as a patch, as it sets the UART up
>> correctly. And so basic communciation can be had with the device. This
>> has been confirmed by Tony McKahan @ Armbian, in particular that the
>> CTS/RTS is needed.
>>
>> When Vasily patch is accepted, this will be added as a minor patch on
>> top of this patch; as this patch gives the pins needed.
>>
>> The one oddity, is the RESET pin, it is labeled this way on the
>> schematic. However the hci_h5.c driver calls this ENABLE. Here we have
>> stuck with the schematic name.
>>
>> Signed-off-by: David Summers <beagleboard@davidjohnsummers.uk>
>> ---
>> arch/arm/boot/dts/rk3288-tinker.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> index 0ffab1b7c940..d29f5b34d7e6 100644
>> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
>> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> @@ -486,6 +486,17 @@
>>
>> &uart0 {
>> 	status = "okay";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
>> +
>> +	bluetooth {
>> +		clocks = <&rk808 RK808_CLKOUT1>;
>> +		reset-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
>> +		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
>> +		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
>> +		vcc-18-supply = <&vcc_18>;
>> +		vcc-io-supply = <&vcc_io>;
>> +	};
>> };
> I need an ACK from Rob for this and also you might want to send the whole series for me to review in full context.
>
> Regards
>
> Marcel
>
Yes happy to wait for ACK from Rob. Of the 3 patches done this is the 
least urgent, as Bluetooth is currently non functioning on these 
machines, so delay in this doesn't change the status quo. Patch 3 is 
self standing, e.g. not applying it doesn't affect the other two. 
However patch 3 probably has to be applied sequentially after patches 
1&2 as all are on the single file.

Following on from Robs comments on last patch sent adding bluetooth, 
I've made this one FAR more detailed. That said though the drivers for 
bluetooth in this case doesn't use clock or supply ASAIK. Most things 
are brought up by the wifi part of the device tree which was patch 2. 
However adding to the bluetooth device tree as well, at least leaves the 
option open to a user just loading bluetooth, and not wifi.

The one thing missing from this bluetooth device tree, is explaining 
which pins need to be pulled to bring up the card. This is part be 
design (the tinker board and rt8723bs both have bad public documentation 
- so exact operation is hard to guess ...); but also because I couldn't 
see a way of getting a SerDev device to pull pins on loading, unlike 
sdio (used for wifi).

Full series:

Part 1 - device tree changes for sd card
Part 2 - adding wifi to the device tree
Part 3 - adding outline bluetooth

So are each fairly self standing. However if interested in parts 1 and 2 
they can be found:

http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023330.html
http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023331.html

Regards, and yes happy to wait and see what Rob has to say.

David.



WARNING: multiple messages have this Message-ID (diff)
From: David Summers <beagleboard@davidjohnsummers.uk>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
	linux-bluetooth@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	frowand.list@gmail.com, linux-arm-kernel@lists.infradead.org,
	Johan Hedberg <johan.hedberg@gmail.com>
Subject: Re: [PATCH v3 3/3] arm: dts: rk3288-tinker.dtsi: Add outline Bluetooth support
Date: Mon, 11 Mar 2019 20:48:17 +0000	[thread overview]
Message-ID: <f4cee9a8-8ff5-52f8-7170-d78b6917ca74@davidjohnsummers.uk> (raw)
In-Reply-To: <C67B8798-ACD1-470B-B69A-650A62AE7982@holtmann.org>

Hi Marcel,

On 11/03/2019 16:41, Marcel Holtmann wrote:
> Hi David,
>
>> This patch is an outline for bluetooth on the ASUS Tinker Board (S).
>>
>> Bluetooth is provided my RTL8723BS on these machine, and this is wired
>> into UART0.
>>
>> Here this is performed as a SerDev device.
>>
>> Now as presented, this does not give functioning bluetooth. The
>> updates needed to the device driver:
>>
>> https://www.spinics.net/lists/linux-bluetooth/msg78661.html
>>
>> Haven't yet been accepted. So this device tree hook doesn't yet have
>> "realtek,rtl8723bs-bt" compatible flag.
>>
>> It is however still submitted as a patch, as it sets the UART up
>> correctly. And so basic communciation can be had with the device. This
>> has been confirmed by Tony McKahan @ Armbian, in particular that the
>> CTS/RTS is needed.
>>
>> When Vasily patch is accepted, this will be added as a minor patch on
>> top of this patch; as this patch gives the pins needed.
>>
>> The one oddity, is the RESET pin, it is labeled this way on the
>> schematic. However the hci_h5.c driver calls this ENABLE. Here we have
>> stuck with the schematic name.
>>
>> Signed-off-by: David Summers <beagleboard@davidjohnsummers.uk>
>> ---
>> arch/arm/boot/dts/rk3288-tinker.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> index 0ffab1b7c940..d29f5b34d7e6 100644
>> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
>> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
>> @@ -486,6 +486,17 @@
>>
>> &uart0 {
>> 	status = "okay";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
>> +
>> +	bluetooth {
>> +		clocks = <&rk808 RK808_CLKOUT1>;
>> +		reset-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
>> +		device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
>> +		host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
>> +		vcc-18-supply = <&vcc_18>;
>> +		vcc-io-supply = <&vcc_io>;
>> +	};
>> };
> I need an ACK from Rob for this and also you might want to send the whole series for me to review in full context.
>
> Regards
>
> Marcel
>
Yes happy to wait for ACK from Rob. Of the 3 patches done this is the 
least urgent, as Bluetooth is currently non functioning on these 
machines, so delay in this doesn't change the status quo. Patch 3 is 
self standing, e.g. not applying it doesn't affect the other two. 
However patch 3 probably has to be applied sequentially after patches 
1&2 as all are on the single file.

Following on from Robs comments on last patch sent adding bluetooth, 
I've made this one FAR more detailed. That said though the drivers for 
bluetooth in this case doesn't use clock or supply ASAIK. Most things 
are brought up by the wifi part of the device tree which was patch 2. 
However adding to the bluetooth device tree as well, at least leaves the 
option open to a user just loading bluetooth, and not wifi.

The one thing missing from this bluetooth device tree, is explaining 
which pins need to be pulled to bring up the card. This is part be 
design (the tinker board and rt8723bs both have bad public documentation 
- so exact operation is hard to guess ...); but also because I couldn't 
see a way of getting a SerDev device to pull pins on loading, unlike 
sdio (used for wifi).

Full series:

Part 1 - device tree changes for sd card
Part 2 - adding wifi to the device tree
Part 3 - adding outline bluetooth

So are each fairly self standing. However if interested in parts 1 and 2 
they can be found:

http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023330.html
http://lists.infradead.org/pipermail/linux-rockchip/2019-March/023331.html

Regards, and yes happy to wait and see what Rob has to say.

David.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-03-11 20:48 UTC|newest]

Thread overview: 116+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-17 12:15 [PATCH 0/3] ARM: dts: rk3288 Tinker Board (S) updates David Summers
2019-02-17 12:15 ` David Summers
2019-02-17 12:15 ` [PATCH 1/3] ARM: dts: rk3288 Tinker Board (S) sdcard changes David Summers
2019-02-17 12:15   ` David Summers
2019-02-17 14:00   ` Robin Murphy
2019-02-17 14:00     ` Robin Murphy
2019-02-17 15:19     ` David Summers
2019-02-17 15:19       ` David Summers
2019-02-18 11:54       ` Robin Murphy
2019-02-18 11:54         ` Robin Murphy
2019-02-19 20:13         ` David Summers
2019-02-19 20:13           ` David Summers
     [not found]   ` <20190217121513.22965-2-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-17 20:29     ` Stefan Wahren
2019-02-17 20:29       ` Stefan Wahren
     [not found]       ` <1660942499.343639.1550435365757-uEpKuDZ350hmhno068Nerg@public.gmane.org>
2019-02-18 20:08         ` David Summers
2019-02-18 20:08           ` David Summers
2019-02-22 18:47     ` [PATCH 1/3 v2] ARM: dts: rk3288-tinker.dtsi: Fix SD card detection David Summers
     [not found]       ` <20190222184708.32004-1-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-24 19:26         ` Jonas Karlman
2019-02-24 19:26           ` Jonas Karlman
     [not found]           ` <AM3PR03MB096656098C6CB4712C73C095AC790-XQTXrJX/giFAc9da7WRX18eAHadYHfrlvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2019-02-24 19:35             ` David Summers
     [not found]               ` <5387a001-1036-bb5c-e781-18e87ca6e7bd-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-24 19:56                 ` Jonas Karlman
     [not found]                   ` <AM3PR03MB09663F32FC40000E42C1A722AC790-XQTXrJX/giFAc9da7WRX18eAHadYHfrlvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2019-02-24 20:10                     ` David Summers
     [not found]                       ` <e1f1a93e-505b-bf53-a253-5c1ddaeaebf8-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-24 22:54                         ` Heiko Stübner
2019-02-24 22:54                           ` Heiko Stübner
2019-02-25  8:59                           ` Jonas Karlman
2019-02-25 21:00                           ` David Summers
     [not found]                             ` <31863095-94b5-5fec-0293-b30172426b93-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-25 21:14                               ` Doug Anderson
2019-02-25 17:13         ` Doug Anderson
     [not found]           ` <CAD=FV=UkQ7pEan4aGezvQZZjBc0gDJ1R7YRbN1Lbv9HBVQRgHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-02-25 21:11             ` David Summers
     [not found]               ` <9e90c5dd-7b1e-9e53-81ac-fb3b515215ca-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-25 21:18                 ` Doug Anderson
     [not found]                   ` <CAD=FV=XEPKpDVLdpCVB9eMzJNE8C5Pr=fRgRmJXgxzrDFJ39mQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-02-25 22:20                     ` Heiko Stübner
2019-02-26 14:46                       ` Robin Murphy
     [not found]                         ` <108411d8-9607-d92d-e546-d0c85bcabc51-5wv7dgnIgG8@public.gmane.org>
2019-02-26 16:43                           ` Doug Anderson
     [not found]                             ` <CAD=FV=X0rRPkEim1sHS9EqDCLiWPO7e5Vu-0gAcX7YZ_omeKPw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-02-27 13:48                               ` Robin Murphy
2019-03-03 11:08         ` David Summers
2019-02-17 12:15 ` [PATCH 2/3] ARM: dts: rk3288 Tinker Board (S) add wi-fi David Summers
2019-02-17 12:15   ` David Summers
     [not found]   ` <20190217121513.22965-3-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-17 14:32     ` Tony McKahan
2019-02-17 14:32       ` Tony McKahan
2019-02-17 15:55       ` David Summers
     [not found]         ` <4ef63671-f58d-3b16-9055-09e69314a0e6-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-17 17:32           ` Tony McKahan
2019-02-17 17:32             ` Tony McKahan
2019-02-17 21:19           ` Stefan Wahren
2019-02-17 21:19             ` Stefan Wahren
     [not found]       ` <CAERgokmpHQb2czJdx++qFoogFRmkvXZm=4BNOsVuCz-ZvgTEaw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-02-17 19:03         ` David Summers
2019-02-17 19:03           ` David Summers
2019-02-17 20:43     ` Stefan Wahren
2019-02-17 20:43       ` Stefan Wahren
2019-02-18 12:30       ` Robin Murphy
2019-02-18 12:30         ` Robin Murphy
     [not found]       ` <1528638260.343699.1550436208775-uEpKuDZ350hmhno068Nerg@public.gmane.org>
2019-02-18 20:26         ` David Summers
2019-02-18 20:26           ` David Summers
2019-02-18 21:48           ` Stefan Wahren
2019-02-18 21:48             ` Stefan Wahren
2019-03-03 19:40   ` David Summers
2019-03-03 19:40     ` David Summers
     [not found]     ` <9df2e318-a459-bded-2971-90a6722e1a4f-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-03 22:12       ` Tony McKahan
2019-03-03 22:12         ` Tony McKahan
2019-02-17 12:15 ` [PATCH 3/3] ARM: dts: rk3288 Tinker Board (S) add bluetooth David Summers
2019-02-17 12:15   ` David Summers
     [not found]   ` <20190217121513.22965-4-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-02-17 13:31     ` Tony McKahan
2019-02-17 13:31       ` Tony McKahan
2019-02-17 21:05     ` Stefan Wahren
2019-02-17 21:05       ` Stefan Wahren
2019-02-18 20:47       ` David Summers
2019-02-18 21:40         ` Stefan Wahren
2019-03-03 20:15   ` David Summers
2019-03-03 20:15     ` David Summers
2019-02-23 19:42 ` [PATCH 0/3] ARM: dts: rk3288 Tinker Board (S) updates David Summers
2019-02-23 19:42   ` David Summers
2019-03-09 15:36 ` [PATCH v3 1/3] arm: dts: rk3288-tinker.dtsi: Fix SD card detection David Summers
2019-03-09 15:36   ` David Summers
2019-03-09 15:39 ` David Summers
2019-03-09 15:39   ` David Summers
     [not found]   ` <20190309153923.22806-1-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-09 15:39     ` [PATCH v3 2/3] arm: dts: rk3288-tinker.dtsi: Enable WiFi David Summers
2019-03-09 15:39       ` David Summers
2019-03-11 22:18       ` Robin Murphy
2019-03-11 22:18         ` Robin Murphy
     [not found]         ` <383c9884-4885-34e1-9ef7-96e936bb211d-5wv7dgnIgG8@public.gmane.org>
2019-03-12 20:41           ` David Summers
2019-03-12 20:41             ` David Summers
     [not found]             ` <c91db9a2-4283-0ea5-949e-ed190a7a8083-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-12 20:55               ` Heiko Stübner
2019-03-12 20:55                 ` Heiko Stübner
     [not found]       ` <20190309153923.22806-2-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-12 14:18         ` Heiko Stuebner
2019-03-12 14:18           ` Heiko Stuebner
2019-03-12 14:21           ` Stefan Wahren
2019-03-12 14:21             ` Stefan Wahren
2019-03-13 10:50         ` Heiko Stübner
2019-03-13 10:50           ` Heiko Stübner
2019-03-09 15:39     ` [PATCH v3 3/3] arm: dts: rk3288-tinker.dtsi: Add outline Bluetooth support David Summers
2019-03-09 15:39       ` David Summers
2019-03-09 15:39       ` David Summers
2019-03-11 16:41       ` Marcel Holtmann
2019-03-11 16:41         ` Marcel Holtmann
2019-03-11 16:41         ` Marcel Holtmann
2019-03-11 20:48         ` David Summers [this message]
2019-03-11 20:48           ` David Summers
2019-03-11 20:48           ` David Summers
     [not found]       ` <20190309153923.22806-3-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-13 10:56         ` Heiko Stübner
2019-03-13 10:56           ` Heiko Stübner
2019-03-13 10:56           ` Heiko Stübner
2019-03-13 19:57           ` David Summers
2019-03-13 20:02           ` David Summers
2019-03-13 20:02             ` David Summers
2019-03-12 14:08     ` [PATCH v3 1/3] arm: dts: rk3288-tinker.dtsi: Fix SD card detection Heiko Stuebner
2019-03-12 14:08       ` Heiko Stuebner
2019-03-12 14:17       ` Robin Murphy
2019-03-12 14:17         ` Robin Murphy
2019-03-12 14:22     ` Heiko Stuebner
2019-03-12 14:22       ` Heiko Stuebner
2019-03-12 20:34       ` David Summers
     [not found]         ` <4a1ad220-103d-543e-56d1-3c6d6ad906ec-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2019-03-12 20:52           ` Heiko Stübner
2019-03-12 20:52             ` Heiko Stübner
2019-03-12 21:04             ` Jonas Karlman
2019-03-12 21:04               ` Jonas Karlman
2019-03-13 10:40     ` Heiko Stübner
2019-03-13 10:40       ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f4cee9a8-8ff5-52f8-7170-d78b6917ca74@davidjohnsummers.uk \
    --to=beagleboard@davidjohnsummers.uk \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=heiko@sntech.de \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=marcel@holtmann.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.