[PATCH v6 00/14] Linux RISC-V AIA Support

[PATCH v6 00/14] Linux RISC-V AIA Support

[Anup Patel]

The RISC-V AIA specification is now frozen as-per the RISC-V international
process. The latest frozen specifcation can be found at:
https://github.com/riscv/riscv-aia/releases/download/1.0/riscv-interrupts-1.0.pdf

At a high-level, the AIA specification adds three things:
1) AIA CSRs
   - Improved local interrupt support
2) Incoming Message Signaled Interrupt Controller (IMSIC)
   - Per-HART MSI controller
   - Support MSI virtualization
   - Support IPI along with virtualization
3) Advanced Platform-Level Interrupt Controller (APLIC)
   - Wired interrupt controller
   - In MSI-mode, converts wired interrupt into MSIs (i.e. MSI generator)
   - In Direct-mode, injects external interrupts directly into HARTs

For an overview of the AIA specification, refer the AIA virtualization
talk at KVM Forum 2022:
https://static.sched.com/hosted_files/kvmforum2022/a1/AIA_Virtualization_in_KVM_RISCV_final.pdf
https://www.youtube.com/watch?v=r071dL8Z0yo

To test this series, use QEMU v7.2 (or higher) and OpenSBI v1.2 (or higher).

These patches can also be found in the riscv_aia_v6 branch at:
https://github.com/avpatel/linux.git

Changes since v5:
 - Rebased on Linux-6.5-rc2
 - Updated the overall series to ensure that only IPI, timer, and
   INTC drivers are probed very early whereas rest of the interrupt
   controllers (such as PLIC, APLIC, and IMISC) are probed as
   regular platform drivers.
 - Renamed riscv_fw_parent_hartid() to riscv_get_intc_hartid()
 - New PATCH1 to add fw_devlink support for msi-parent DT property
 - New PATCH2 to ensure all INTC suppliers are initialized which in-turn
   fixes the probing issue for PLIC, APLIC and IMSIC as platform driver
 - New PATCH3 to use platform driver probing for PLIC
 - Re-structured the IMSIC driver into two separate drivers: early and
   platform. The IMSIC early driver (PATCH7) only initialized IMSIC state
   and provides IPIs whereas the IMSIC platform driver (PATCH8) is probed
   provides MSI domain for platform devices.
 - Re-structure the APLIC platform driver into three separe sources: main,
   direct mode, and MSI mode.

Changes since v4:
 - Rebased on Linux-6.5-rc1
 - Added "Dependencies" in the APLIC bindings (PATCH6 in v4)
 - Dropped the PATCH6 which was changing the IOMMU DMA domain APIs
 - Dropped use of IOMMU DMA APIs in the IMSIC driver (PATCH4)

Changes since v3:
 - Rebased on Linux-6.4-rc6
 - Droped PATCH2 of v3 series instead we now set FWNODE_FLAG_BEST_EFFORT via
   IRQCHIP_DECLARE()
 - Extend riscv_fw_parent_hartid() to support both DT and ACPI in PATCH1
 - Extend iommu_dma_compose_msi_msg() instead of adding iommu_dma_select_msi()
   in PATCH6
 - Addressed Conor's comments in PATCH3
 - Addressed Conor's and Rob's comments in PATCH7

Changes since v2:
 - Rebased on Linux-6.4-rc1
 - Addressed Rob's comments on DT bindings patches 4 and 8.
 - Addessed Marc's comments on IMSIC driver PATCH5
 - Replaced use of OF apis in APLIC and IMSIC drivers with FWNODE apis
   this makes both drivers easily portable for ACPI support. This also
   removes unnecessary indirection from the APLIC and IMSIC drivers.
 - PATCH1 is a new patch for portability with ACPI support
 - PATCH2 is a new patch to fix probing in APLIC drivers for APLIC-only systems.
 - PATCH7 is a new patch which addresses the IOMMU DMA domain issues pointed
   out by SiFive

Changes since v1:
 - Rebased on Linux-6.2-rc2
 - Addressed comments on IMSIC DT bindings for PATCH4
 - Use raw_spin_lock_irqsave() on ids_lock for PATCH5
 - Improved MMIO alignment checks in PATCH5 to allow MMIO regions
   with holes.
 - Addressed comments on APLIC DT bindings for PATCH6
 - Fixed warning splat in aplic_msi_write_msg() caused by
   zeroed MSI message in PATCH7
 - Dropped DT property riscv,slow-ipi instead will have module
   parameter in future.

Anup Patel (14):
  RISC-V: Add riscv_get_intc_hartid() function
  of: property: Add fw_devlink support for msi-parent
  drivers: irqchip/riscv-intc: Mark all INTC nodes as initialized
  irqchip/sifive-plic: Use platform driver probing for PLIC
  irqchip/riscv-intc: Add support for RISC-V AIA
  dt-bindings: interrupt-controller: Add RISC-V incoming MSI controller
  irqchip: Add RISC-V incoming MSI controller early driver
  irqchip/riscv-imsic: Add support for platform MSI irqdomain
  irqchip/riscv-imsic: Add support for PCI MSI irqdomain
  dt-bindings: interrupt-controller: Add RISC-V advanced PLIC
  irqchip: Add RISC-V advanced PLIC driver for direct-mode
  irqchip/riscv-aplic: Add support for MSI-mode
  RISC-V: Select APLIC and IMSIC drivers
  MAINTAINERS: Add entry for RISC-V AIA drivers

 .../interrupt-controller/riscv,aplic.yaml     | 172 ++++++
 .../interrupt-controller/riscv,imsics.yaml    | 172 ++++++
 MAINTAINERS                                   |  14 +
 arch/riscv/Kconfig                            |   2 +
 arch/riscv/include/asm/processor.h            |   4 +-
 arch/riscv/kernel/cpu.c                       |  19 +-
 drivers/irqchip/Kconfig                       |  25 +-
 drivers/irqchip/Makefile                      |   3 +
 drivers/irqchip/irq-riscv-aplic-direct.c      | 326 +++++++++++
 drivers/irqchip/irq-riscv-aplic-main.c        | 240 ++++++++
 drivers/irqchip/irq-riscv-aplic-main.h        |  53 ++
 drivers/irqchip/irq-riscv-aplic-msi.c         | 285 ++++++++++
 drivers/irqchip/irq-riscv-imsic-early.c       | 258 +++++++++
 drivers/irqchip/irq-riscv-imsic-platform.c    | 328 +++++++++++
 drivers/irqchip/irq-riscv-imsic-state.c       | 523 ++++++++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.h       |  67 +++
 drivers/irqchip/irq-riscv-intc.c              |  46 +-
 drivers/irqchip/irq-sifive-plic.c             |  15 +-
 drivers/of/property.c                         |  32 ++
 include/linux/irqchip/riscv-aplic.h           | 119 ++++
 include/linux/irqchip/riscv-imsic.h           |  86 +++
 21 files changed, 2773 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
 create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c
 create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c
 create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h
 create mode 100644 drivers/irqchip/irq-riscv-aplic-msi.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-early.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-platform.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-state.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-state.h
 create mode 100644 include/linux/irqchip/riscv-aplic.h
 create mode 100644 include/linux/irqchip/riscv-imsic.h

-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 01/14] RISC-V: Add riscv_get_intc_hartid() function

[Anup Patel]

We add a common riscv_get_intc_hartid() which help device drivers to
get hartid of the HART associated with a INTC (i.e. local interrupt
controller) fwnode. This new function is more generic compared to
the existing riscv_of_parent_hartid() function hence we also replace
use of riscv_of_parent_hartid() with riscv_get_intc_hartid().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/include/asm/processor.h |  4 +++-
 arch/riscv/kernel/cpu.c            | 19 ++++++++++++++++++-
 drivers/irqchip/irq-riscv-intc.c   |  2 +-
 drivers/irqchip/irq-sifive-plic.c  |  3 ++-
 4 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index c950a8d9edef..662da1e112dd 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -79,7 +79,9 @@ static inline void wait_for_interrupt(void)
 struct device_node;
 int riscv_of_processor_hartid(struct device_node *node, unsigned long *hartid);
 int riscv_early_of_processor_hartid(struct device_node *node, unsigned long *hartid);
-int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid);
+
+struct fwnode_handle;
+int riscv_get_intc_hartid(struct fwnode_handle *node, unsigned long *hartid);
 
 extern void riscv_fill_hwcap(void);
 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
diff --git a/arch/riscv/kernel/cpu.c b/arch/riscv/kernel/cpu.c
index a2fc952318e9..5d26430fbcbd 100644
--- a/arch/riscv/kernel/cpu.c
+++ b/arch/riscv/kernel/cpu.c
@@ -81,7 +81,8 @@ int riscv_early_of_processor_hartid(struct device_node *node, unsigned long *har
  * To achieve this, we walk up the DT tree until we find an active
  * RISC-V core (HART) node and extract the cpuid from it.
  */
-int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid)
+static int riscv_of_parent_hartid(struct device_node *node,
+				  unsigned long *hartid)
 {
 	int rc;
 
@@ -96,6 +97,22 @@ int riscv_of_parent_hartid(struct device_node *node, unsigned long *hartid)
 	return -1;
 }
 
+/* Find hart ID of the INTC fwnode. */
+int riscv_get_intc_hartid(struct fwnode_handle *node, unsigned long *hartid)
+{
+	int rc;
+	u64 temp;
+
+	if (!is_of_node(node)) {
+		rc = fwnode_property_read_u64_array(node, "hartid", &temp, 1);
+		if (!rc)
+			*hartid = temp;
+	} else
+		rc = riscv_of_parent_hartid(to_of_node(node), hartid);
+
+	return rc;
+}
+
 DEFINE_PER_CPU(struct riscv_cpuinfo, riscv_cpuinfo);
 
 unsigned long riscv_cached_mvendorid(unsigned int cpu_id)
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 4adeee1bc391..65f4a2afb381 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -143,7 +143,7 @@ static int __init riscv_intc_init(struct device_node *node,
 	int rc;
 	unsigned long hartid;
 
-	rc = riscv_of_parent_hartid(node, &hartid);
+	rc = riscv_get_intc_hartid(of_fwnode_handle(node), &hartid);
 	if (rc < 0) {
 		pr_warn("unable to find hart id for %pOF\n", node);
 		return 0;
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index e1484905b7bd..56b0544b1f27 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -477,7 +477,8 @@ static int __init __plic_init(struct device_node *node,
 			continue;
 		}
 
-		error = riscv_of_parent_hartid(parent.np, &hartid);
+		error = riscv_get_intc_hartid(of_fwnode_handle(parent.np),
+					      &hartid);
 		if (error < 0) {
 			pr_warn("failed to parse hart ID for context %d.\n", i);
 			continue;
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 02/14] of: property: Add fw_devlink support for msi-parent

[Anup Patel]

This allows fw_devlink to create device links between consumers of
a MSI and the supplier of the MSI.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/of/property.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index ddc75cd50825..e4096b79a872 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1325,6 +1325,37 @@ static struct device_node *parse_interrupts(struct device_node *np,
 	return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
 }
 
+static struct device_node *parse_msi_parent(struct device_node *np,
+					    const char *prop_name, int index)
+{
+	struct of_phandle_args sup_args;
+	struct device_node *msi_np;
+
+	if (!IS_ENABLED(CONFIG_OF_IRQ))
+		return NULL;
+
+	if (strcmp(prop_name, "msi-parent"))
+		return NULL;
+
+	msi_np = of_parse_phandle(np, prop_name, 0);
+	if (msi_np) {
+		if (!of_property_read_bool(msi_np, "#msi-cells")) {
+			if (index) {
+				of_node_put(msi_np);
+				return NULL;
+			}
+			return msi_np;
+		}
+		of_node_put(msi_np);
+	}
+
+	if (of_parse_phandle_with_args(np, prop_name, "#msi-cells", index,
+				       &sup_args))
+		return NULL;
+
+	return sup_args.np;
+}
+
 static const struct supplier_bindings of_supplier_bindings[] = {
 	{ .parse_prop = parse_clocks, },
 	{ .parse_prop = parse_interconnects, },
@@ -1359,6 +1390,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
 	{ .parse_prop = parse_regulators, },
 	{ .parse_prop = parse_gpio, },
 	{ .parse_prop = parse_gpios, },
+	{ .parse_prop = parse_msi_parent, },
 	{}
 };
 
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 03/14] drivers: irqchip/riscv-intc: Mark all INTC nodes as initialized

[Anup Patel]

The RISC-V INTC local interrupts are per-HART (or per-CPU) so
we create INTC IRQ domain only for the INTC node belonging to
the boot HART. This means only the boot HART INTC node will be
marked as initialized and other INTC nodes won't be marked which
results downstream interrupt controllers (such as IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.

To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-intc.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 65f4a2afb381..4e2704bc25fb 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -155,8 +155,16 @@ static int __init riscv_intc_init(struct device_node *node,
 	 * for each INTC DT node. We only need to do INTC initialization
 	 * for the INTC DT node belonging to boot CPU (or boot HART).
 	 */
-	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
+	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) {
+		/*
+		 * The INTC nodes of each CPU are suppliers for downstream
+		 * interrupt controllers (such as IMSIC and APLIC direct-mode)
+		 * so we should mark an INTC node as initialized if we are
+		 * not creating IRQ domain for it.
+		 */
+		fwnode_dev_initialized(of_fwnode_handle(node), true);
 		return 0;
+	}
 
 	return riscv_intc_init_common(of_node_to_fwnode(node));
 }
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 04/14] irqchip/sifive-plic: Use platform driver probing for PLIC

[Anup Patel]

The PLIC driver does not require very early initialization so let us
replace use of IRQCHIP_DECLARE() with IRQCHIP_PLATFORM_DRIVER_xyz()
so that PLIC is probed through platform driver probing.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-sifive-plic.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 56b0544b1f27..dc02f0761ced 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -569,8 +569,10 @@ static int __init plic_init(struct device_node *node,
 	return __plic_init(node, parent, 0);
 }
 
-IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
-IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
+IRQCHIP_PLATFORM_DRIVER_BEGIN(sifive_plic)
+IRQCHIP_MATCH("sifive,plic-1.0.0", plic_init)
+IRQCHIP_MATCH("riscv,plic0", plic_init) /* for legacy systems */
+IRQCHIP_PLATFORM_DRIVER_END(sifive_plic)
 
 static int __init plic_edge_init(struct device_node *node,
 				 struct device_node *parent)
@@ -578,5 +580,7 @@ static int __init plic_edge_init(struct device_node *node,
 	return __plic_init(node, parent, BIT(PLIC_QUIRK_EDGE_INTERRUPT));
 }
 
-IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_edge_init);
-IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
+IRQCHIP_PLATFORM_DRIVER_BEGIN(edge_plic)
+IRQCHIP_MATCH("andestech,nceplic100", plic_edge_init)
+IRQCHIP_MATCH("thead,c900-plic", plic_edge_init)
+IRQCHIP_PLATFORM_DRIVER_END(edge_plic)
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 05/14] irqchip/riscv-intc: Add support for RISC-V AIA

[Anup Patel]

The RISC-V advanced interrupt architecture (AIA) extends the per-HART
local interrupts in following ways:
1. Minimum 64 local interrupts for both RV32 and RV64
2. Ability to process multiple pending local interrupts in same
   interrupt handler
3. Priority configuration for each local interrupts
4. Special CSRs to configure/access the per-HART MSI controller

We add support for #1 and #2 described above in the RISC-V intc driver.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/irq-riscv-intc.c | 34 ++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 4e2704bc25fb..1a0fc87152c5 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/smp.h>
+#include <asm/hwcap.h>
 
 static struct irq_domain *intc_domain;
 
@@ -30,6 +31,15 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	generic_handle_domain_irq(intc_domain, cause);
 }
 
+static asmlinkage void riscv_intc_aia_irq(struct pt_regs *regs)
+{
+	unsigned long topi;
+
+	while ((topi = csr_read(CSR_TOPI)))
+		generic_handle_domain_irq(intc_domain,
+					  topi >> TOPI_IID_SHIFT);
+}
+
 /*
  * On RISC-V systems local interrupts are masked or unmasked by writing
  * the SIE (Supervisor Interrupt Enable) CSR.  As CSRs can only be written
@@ -39,12 +49,18 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 
 static void riscv_intc_irq_mask(struct irq_data *d)
 {
-	csr_clear(CSR_IE, BIT(d->hwirq));
+	if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+		csr_clear(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+	else
+		csr_clear(CSR_IE, BIT(d->hwirq));
 }
 
 static void riscv_intc_irq_unmask(struct irq_data *d)
 {
-	csr_set(CSR_IE, BIT(d->hwirq));
+	if (IS_ENABLED(CONFIG_32BIT) && d->hwirq >= BITS_PER_LONG)
+		csr_set(CSR_IEH, BIT(d->hwirq - BITS_PER_LONG));
+	else
+		csr_set(CSR_IE, BIT(d->hwirq));
 }
 
 static void riscv_intc_irq_eoi(struct irq_data *d)
@@ -115,16 +131,20 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
 
 static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 {
-	int rc;
+	int rc, nr_irqs = riscv_isa_extension_available(NULL, SxAIA) ?
+			  64 : BITS_PER_LONG;
 
-	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+	intc_domain = irq_domain_create_linear(fn, nr_irqs,
 					       &riscv_intc_domain_ops, NULL);
 	if (!intc_domain) {
 		pr_err("unable to add IRQ domain\n");
 		return -ENXIO;
 	}
 
-	rc = set_handle_irq(&riscv_intc_irq);
+	if (riscv_isa_extension_available(NULL, SxAIA))
+		rc = set_handle_irq(&riscv_intc_aia_irq);
+	else
+		rc = set_handle_irq(&riscv_intc_irq);
 	if (rc) {
 		pr_err("failed to set irq handler\n");
 		return rc;
@@ -132,7 +152,9 @@ static int __init riscv_intc_init_common(struct fwnode_handle *fn)
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+	pr_info("%d local interrupts mapped%s\n",
+		nr_irqs, riscv_isa_extension_available(NULL, SxAIA) ?
+			 " using AIA" : "");
 
 	return 0;
 }
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 06/14] dt-bindings: interrupt-controller: Add RISC-V incoming MSI controller

[Anup Patel]

We add DT bindings document for the RISC-V incoming MSI controller
(IMSIC) defined by the RISC-V advanced interrupt architecture (AIA)
specification.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../interrupt-controller/riscv,imsics.yaml    | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
new file mode 100644
index 000000000000..84976f17a4a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Incoming MSI Controller (IMSIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming
+  MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V
+  AIA specification can be found at https://github.com/riscv/riscv-aia.
+
+  The IMSIC is a per-CPU (or per-HART) device with separate interrupt file
+  for each privilege level (machine or supervisor). The configuration of
+  a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO
+  space to receive MSIs from devices. Each IMSIC interrupt file supports a
+  fixed number of interrupt identities (to distinguish MSIs from devices)
+  which is same for given privilege level across CPUs (or HARTs).
+
+  The device tree of a RISC-V platform will have one IMSIC device tree node
+  for each privilege level (machine or supervisor) which collectively describe
+  IMSIC interrupt files at that privilege level across CPUs (or HARTs).
+
+  The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform
+  follows a particular scheme defined by the RISC-V AIA specification. A IMSIC
+  group is a set of IMSIC interrupt files co-located in MMIO space and we can
+  have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a
+  RISC-V platform. The MSI target address of a IMSIC interrupt file at given
+  privilege level (machine or supervisor) encodes group index, HART index,
+  and guest index (shown below).
+
+  XLEN-1            > (HART Index MSB)                  12    0
+  |                  |                                  |     |
+  -------------------------------------------------------------
+  |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index|  0  |
+  -------------------------------------------------------------
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,imsics
+      - const: riscv,imsics
+
+  reg:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Base address of each IMSIC group.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 0
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      This property represents the set of CPUs (or HARTs) for which given
+      device tree node describes the IMSIC interrupt files. Each node pointed
+      to should be a riscv,cpu-intc node, which has a CPU node (i.e. RISC-V
+      HART) as parent.
+
+  riscv,num-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities supported by IMSIC interrupt file.
+
+  riscv,num-guest-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities are supported by IMSIC guest interrupt
+      file. When not specified it is assumed to be same as specified by the
+      riscv,num-ids property.
+
+  riscv,guest-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of guest index bits in the MSI target address.
+
+  riscv,hart-index-bits:
+    minimum: 0
+    maximum: 15
+    description:
+      Number of HART index bits in the MSI target address. When not
+      specified it is calculated based on the interrupts-extended property.
+
+  riscv,group-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of group index bits in the MSI target address.
+
+  riscv,group-index-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 55
+    default: 24
+    description:
+      The least significant bit position of the group index bits in the
+      MSI target address.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+  - interrupts-extended
+  - riscv,num-ids
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (Machine-level IMSIC files with just one group):
+
+    interrupt-controller@24000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0x28000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+    };
+
+  - |
+    // Example 2 (Supervisor-level IMSIC files with two groups):
+
+    interrupt-controller@28000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>,
+                            <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0x28000000 0x2000>, /* Group0 IMSICs */
+            <0x29000000 0x2000>; /* Group1 IMSICs */
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+      riscv,group-index-bits = <1>;
+      riscv,group-index-shift = <24>;
+    };
+...
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 07/14] irqchip: Add RISC-V incoming MSI controller early driver

[Anup Patel]

The RISC-V advanced interrupt architecture (AIA) specification
defines a new MSI controller called incoming message signalled
interrupt controller (IMSIC) which manages MSI on per-HART (or
per-CPU) basis. It also supports IPIs as software injected MSIs.
(For more details refer https://github.com/riscv/riscv-aia)

Let us add an early irqchip driver for RISC-V IMSIC which sets
up the IMSIC state and provide IPIs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Kconfig                 |   7 +-
 drivers/irqchip/Makefile                |   1 +
 drivers/irqchip/irq-riscv-imsic-early.c | 258 ++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.c | 523 ++++++++++++++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.h |  66 +++
 include/linux/irqchip/riscv-imsic.h     |  86 ++++
 6 files changed, 940 insertions(+), 1 deletion(-)
 create mode 100644 drivers/irqchip/irq-riscv-imsic-early.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-state.c
 create mode 100644 drivers/irqchip/irq-riscv-imsic-state.h
 create mode 100644 include/linux/irqchip/riscv-imsic.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 09e422da482f..8ef18be5f37b 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -30,7 +30,6 @@ config ARM_GIC_V2M
 
 config GIC_NON_BANKED
 	bool
-
 config ARM_GIC_V3
 	bool
 	select IRQ_DOMAIN_HIERARCHY
@@ -545,6 +544,12 @@ config SIFIVE_PLIC
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
+config RISCV_IMSIC
+	bool
+	depends on RISCV
+	select IRQ_DOMAIN_HIERARCHY
+	select GENERIC_MSI_IRQ
+
 config EXYNOS_IRQ_COMBINER
 	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
 	depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index ffd945fe71aa..d714724387ce 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM)			+= irq-qcom-mpm.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
+obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
diff --git a/drivers/irqchip/irq-riscv-imsic-early.c b/drivers/irqchip/irq-riscv-imsic-early.c
new file mode 100644
index 000000000000..1de89ce1ec2f
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-imsic-early.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv-imsic: " fmt
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-imsic-state.h"
+
+/*
+ * The IMSIC driver uses 1 IPI for ID synchronization and
+ * arch/riscv/kernel/smp.c require 6 IPIs so we fix the
+ * total number of IPIs to 8.
+ */
+#define IMSIC_NR_IPI				8
+
+static int imsic_parent_irq;
+
+#ifdef CONFIG_SMP
+static irqreturn_t imsic_ids_sync_handler(int irq, void *data)
+{
+	imsic_ids_local_sync();
+	return IRQ_HANDLED;
+}
+
+void imsic_ids_remote_sync(void)
+{
+	struct cpumask amask;
+
+	/*
+	 * We simply inject ID synchronization IPI to all target CPUs
+	 * except current CPU. The ipi_send_mask() implementation of
+	 * IPI mux will inject ID synchronization IPI only for CPUs
+	 * that have enabled it so offline CPUs won't receive IPI.
+	 * An offline CPU will unconditionally synchronize IDs through
+	 * imsic_starting_cpu() when the CPU is brought up.
+	 */
+	cpumask_andnot(&amask, cpu_online_mask, cpumask_of(smp_processor_id()));
+	__ipi_send_mask(imsic->ipi_lsync_desc, &amask);
+}
+
+static void imsic_ipi_send(unsigned int cpu)
+{
+	struct imsic_local_config *local =
+				per_cpu_ptr(imsic->global.local, cpu);
+
+	writel(imsic->ipi_id, local->msi_va);
+}
+
+static void imsic_ipi_starting_cpu(void)
+{
+	/* Enable IPIs for current CPU. */
+	__imsic_id_enable(imsic->ipi_id);
+
+	/* Enable virtual IPI used for IMSIC ID synchronization */
+	enable_percpu_irq(imsic->ipi_virq, 0);
+}
+
+static void imsic_ipi_dying_cpu(void)
+{
+	/*
+	 * Disable virtual IPI used for IMSIC ID synchronization so
+	 * that we don't receive ID synchronization requests.
+	 */
+	disable_percpu_irq(imsic->ipi_virq);
+}
+
+static int __init imsic_ipi_domain_init(void)
+{
+	int virq;
+
+	/* Allocate interrupt identity for IPIs */
+	virq = imsic_ids_alloc(get_count_order(1));
+	if (virq < 0)
+		return virq;
+	imsic->ipi_id = virq;
+
+	/* Create IMSIC IPI multiplexing */
+	virq = ipi_mux_create(IMSIC_NR_IPI, imsic_ipi_send);
+	if (virq <= 0) {
+		imsic_ids_free(imsic->ipi_id, get_count_order(1));
+		return (virq < 0) ? virq : -ENOMEM;
+	}
+	imsic->ipi_virq = virq;
+
+	/* First vIRQ is used for IMSIC ID synchronization */
+	virq = request_percpu_irq(imsic->ipi_virq, imsic_ids_sync_handler,
+				  "riscv-imsic-lsync", imsic->global.local);
+	if (virq) {
+		imsic_ids_free(imsic->ipi_id, get_count_order(1));
+		return virq;
+	}
+	irq_set_status_flags(imsic->ipi_virq, IRQ_HIDDEN);
+	imsic->ipi_lsync_desc = irq_to_desc(imsic->ipi_virq);
+
+	/* Set vIRQ range */
+	riscv_ipi_set_virq_range(imsic->ipi_virq + 1, IMSIC_NR_IPI - 1, true);
+
+	/* Announce that IMSIC is providing IPIs */
+	pr_info("%pfwP: providing IPIs using interrupt %d\n",
+		imsic->fwnode, imsic->ipi_id);
+
+	return 0;
+}
+#else
+static void imsic_ipi_starting_cpu(void)
+{
+}
+
+static void imsic_ipi_dying_cpu(void)
+{
+}
+
+static int __init imsic_ipi_domain_init(void)
+{
+	/* Clear the IPI id because we are not using IPIs */
+	imsic->ipi_id = 0;
+	return 0;
+}
+#endif
+
+/*
+ * To handle an interrupt, we read the TOPEI CSR and write zero in one
+ * instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to
+ * Linux interrupt number and let Linux IRQ subsystem handle it.
+ */
+static void imsic_handle_irq(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	irq_hw_number_t hwirq;
+	int err;
+
+	chained_irq_enter(chip, desc);
+
+	while ((hwirq = csr_swap(CSR_TOPEI, 0))) {
+		hwirq = hwirq >> TOPEI_ID_SHIFT;
+
+		if (hwirq == imsic->ipi_id) {
+#ifdef CONFIG_SMP
+			ipi_mux_process();
+#endif
+			continue;
+		}
+
+		if (unlikely(!imsic->base_domain))
+			continue;
+
+		err = generic_handle_domain_irq(imsic->base_domain, hwirq);
+		if (unlikely(err))
+			pr_warn_ratelimited(
+				"hwirq %lu mapping not found\n", hwirq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int imsic_starting_cpu(unsigned int cpu)
+{
+	/* Enable per-CPU parent interrupt */
+	enable_percpu_irq(imsic_parent_irq,
+			  irq_get_trigger_type(imsic_parent_irq));
+
+	/* Setup IPIs */
+	imsic_ipi_starting_cpu();
+
+	/*
+	 * Interrupts identities might have been enabled/disabled while
+	 * this CPU was not running so sync-up local enable/disable state.
+	 */
+	imsic_ids_local_sync();
+
+	/* Enable local interrupt delivery */
+	imsic_ids_local_delivery(true);
+
+	return 0;
+}
+
+static int imsic_dying_cpu(unsigned int cpu)
+{
+	/* Cleanup IPIs */
+	imsic_ipi_dying_cpu();
+
+	return 0;
+}
+
+static int __init imsic_early_probe(struct fwnode_handle *fwnode)
+{
+	int rc;
+	struct irq_domain *domain;
+
+	/* Setup IMSIC state */
+	rc = imsic_setup_state(fwnode);
+	if (rc) {
+		pr_err("%pfwP: failed to setup state (error %d)\n",
+			fwnode, rc);
+		return rc;
+	}
+
+	/* Find parent domain and register chained handler */
+	domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+					  DOMAIN_BUS_ANY);
+	if (!domain) {
+		pr_err("%pfwP: Failed to find INTC domain\n", fwnode);
+		return -ENOENT;
+	}
+	imsic_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
+	if (!imsic_parent_irq) {
+		pr_err("%pfwP: Failed to create INTC mapping\n", fwnode);
+		return -ENOENT;
+	}
+	irq_set_chained_handler(imsic_parent_irq, imsic_handle_irq);
+
+	/* Initialize IPI domain */
+	rc = imsic_ipi_domain_init();
+	if (rc) {
+		pr_err("%pfwP: Failed to initialize IPI domain\n", fwnode);
+		return rc;
+	}
+
+	/*
+	 * Setup cpuhp state (must be done after setting imsic_parent_irq)
+	 *
+	 * Don't disable per-CPU IMSIC file when CPU goes offline
+	 * because this affects IPI and the masking/unmasking of
+	 * virtual IPIs is done via generic IPI-Mux
+	 */
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+			  "irqchip/riscv/imsic:starting",
+			  imsic_starting_cpu, imsic_dying_cpu);
+
+	return 0;
+}
+
+static int __init imsic_early_dt_init(struct device_node *node,
+				      struct device_node *parent)
+{
+	int rc;
+
+	/* Do early setup of IMSIC state and IPIs */
+	rc = imsic_early_probe(&node->fwnode);
+	if (rc)
+		return rc;
+
+	/* Ensure that OF platform device gets probed */
+	of_node_clear_flag(node, OF_POPULATED);
+	return 0;
+}
+IRQCHIP_DECLARE(riscv_imsic, "riscv,imsics", imsic_early_dt_init);
diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c
new file mode 100644
index 000000000000..412b5b919dcc
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-imsic-state.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv-imsic: " fmt
+#include <linux/bitmap.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <asm/hwcap.h>
+
+#include "irq-riscv-imsic-state.h"
+
+#define IMSIC_DISABLE_EIDELIVERY		0
+#define IMSIC_ENABLE_EIDELIVERY			1
+#define IMSIC_DISABLE_EITHRESHOLD		1
+#define IMSIC_ENABLE_EITHRESHOLD		0
+
+#define imsic_csr_write(__c, __v)		\
+do {						\
+	csr_write(CSR_ISELECT, __c);		\
+	csr_write(CSR_IREG, __v);		\
+} while (0)
+
+#define imsic_csr_read(__c)			\
+({						\
+	unsigned long __v;			\
+	csr_write(CSR_ISELECT, __c);		\
+	__v = csr_read(CSR_IREG);		\
+	__v;					\
+})
+
+#define imsic_csr_set(__c, __v)			\
+do {						\
+	csr_write(CSR_ISELECT, __c);		\
+	csr_set(CSR_IREG, __v);			\
+} while (0)
+
+#define imsic_csr_clear(__c, __v)		\
+do {						\
+	csr_write(CSR_ISELECT, __c);		\
+	csr_clear(CSR_IREG, __v);		\
+} while (0)
+
+struct imsic_priv *imsic;
+
+const struct imsic_global_config *imsic_get_global_config(void)
+{
+	return (imsic) ? &imsic->global : NULL;
+}
+EXPORT_SYMBOL_GPL(imsic_get_global_config);
+
+void __imsic_eix_update(unsigned long base_id,
+			unsigned long num_id, bool pend, bool val)
+{
+	unsigned long i, isel, ireg;
+	unsigned long id = base_id, last_id = base_id + num_id;
+
+	while (id < last_id) {
+		isel = id / BITS_PER_LONG;
+		isel *= BITS_PER_LONG / IMSIC_EIPx_BITS;
+		isel += (pend) ? IMSIC_EIP0 : IMSIC_EIE0;
+
+		ireg = 0;
+		for (i = id & (__riscv_xlen - 1);
+		     (id < last_id) && (i < __riscv_xlen); i++) {
+			ireg |= BIT(i);
+			id++;
+		}
+
+		/*
+		 * The IMSIC EIEx and EIPx registers are indirectly
+		 * accessed via using ISELECT and IREG CSRs so we
+		 * need to access these CSRs without getting preempted.
+		 *
+		 * All existing users of this function call this
+		 * function with local IRQs disabled so we don't
+		 * need to do anything special here.
+		 */
+		if (val)
+			imsic_csr_set(isel, ireg);
+		else
+			imsic_csr_clear(isel, ireg);
+	}
+}
+
+void imsic_id_set_target(unsigned int id, unsigned int target_cpu)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	imsic->ids_target_cpu[id] = target_cpu;
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+}
+
+unsigned int imsic_id_get_target(unsigned int id)
+{
+	unsigned int ret;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	ret = imsic->ids_target_cpu[id];
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+
+	return ret;
+}
+
+void imsic_ids_local_sync(void)
+{
+	int i;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	for (i = 1; i <= imsic->global.nr_ids; i++) {
+		if (imsic->ipi_id == i)
+			continue;
+
+		if (test_bit(i, imsic->ids_enabled_bimap))
+			__imsic_id_enable(i);
+		else
+			__imsic_id_disable(i);
+	}
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+}
+
+void imsic_ids_local_delivery(bool enable)
+{
+	if (enable) {
+		imsic_csr_write(IMSIC_EITHRESHOLD, IMSIC_ENABLE_EITHRESHOLD);
+		imsic_csr_write(IMSIC_EIDELIVERY, IMSIC_ENABLE_EIDELIVERY);
+	} else {
+		imsic_csr_write(IMSIC_EIDELIVERY, IMSIC_DISABLE_EIDELIVERY);
+		imsic_csr_write(IMSIC_EITHRESHOLD, IMSIC_DISABLE_EITHRESHOLD);
+	}
+}
+
+int imsic_ids_alloc(unsigned int order)
+{
+	int ret;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	ret = bitmap_find_free_region(imsic->ids_used_bimap,
+				      imsic->global.nr_ids + 1, order);
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+
+	return ret;
+}
+
+void imsic_ids_free(unsigned int base_id, unsigned int order)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	bitmap_release_region(imsic->ids_used_bimap, base_id, order);
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+}
+
+static int __init imsic_ids_init(void)
+{
+	int i;
+	struct imsic_global_config *global = &imsic->global;
+
+	raw_spin_lock_init(&imsic->ids_lock);
+
+	/* Allocate used bitmap */
+	imsic->ids_used_bimap = bitmap_zalloc(global->nr_ids + 1, GFP_KERNEL);
+	if (!imsic->ids_used_bimap)
+		return -ENOMEM;
+
+	/* Allocate enabled bitmap */
+	imsic->ids_enabled_bimap = bitmap_zalloc(global->nr_ids + 1,
+						GFP_KERNEL);
+	if (!imsic->ids_enabled_bimap) {
+		kfree(imsic->ids_used_bimap);
+		return -ENOMEM;
+	}
+
+	/* Allocate target CPU array */
+	imsic->ids_target_cpu = kcalloc(global->nr_ids + 1,
+				       sizeof(unsigned int), GFP_KERNEL);
+	if (!imsic->ids_target_cpu) {
+		bitmap_free(imsic->ids_enabled_bimap);
+		bitmap_free(imsic->ids_used_bimap);
+		return -ENOMEM;
+	}
+	for (i = 0; i <= global->nr_ids; i++)
+		imsic->ids_target_cpu[i] = UINT_MAX;
+
+	/* Reserve ID#0 because it is special and never implemented */
+	bitmap_set(imsic->ids_used_bimap, 0, 1);
+
+	return 0;
+}
+
+static void __init imsic_ids_cleanup(void)
+{
+	kfree(imsic->ids_target_cpu);
+	bitmap_free(imsic->ids_enabled_bimap);
+	bitmap_free(imsic->ids_used_bimap);
+}
+
+static int __init imsic_get_parent_hartid(struct fwnode_handle *fwnode,
+					  u32 index, unsigned long *hartid)
+{
+	int rc;
+	struct fwnode_reference_args parent;
+
+	rc = fwnode_property_get_reference_args(fwnode,
+			"interrupts-extended", "#interrupt-cells",
+			0, index, &parent);
+	if (rc)
+		return rc;
+
+	/*
+	 * Skip interrupts other than external interrupts for
+	 * current privilege level.
+	 */
+	if (parent.args[0] != RV_IRQ_EXT)
+		return -EINVAL;
+
+	return riscv_get_intc_hartid(parent.fwnode, hartid);
+}
+
+static int __init imsic_get_mmio_resource(struct fwnode_handle *fwnode,
+					  u32 index, struct resource *res)
+{
+	/*
+	 * Currently, only OF fwnode is support so extend this function
+	 * for other types of fwnode for ACPI support.
+	 */
+	if (!is_of_node(fwnode))
+		return -EINVAL;
+	return of_address_to_resource(to_of_node(fwnode), index, res);
+}
+
+int __init imsic_setup_state(struct fwnode_handle *fwnode)
+{
+	int rc, cpu;
+	phys_addr_t base_addr;
+	void __iomem **mmios_va = NULL;
+	struct resource res, *mmios = NULL;
+	struct imsic_local_config *local;
+	struct imsic_global_config *global;
+	unsigned long reloff, hartid;
+	u32 i, j, index, nr_parent_irqs, nr_handlers = 0, num_mmios = 0;
+
+	/*
+	 * Only one IMSIC instance allowed in a platform for clean
+	 * implementation of SMP IRQ affinity and per-CPU IPIs.
+	 *
+	 * This means on a multi-socket (or multi-die) platform we
+	 * will have multiple MMIO regions for one IMSIC instance.
+	 */
+	if (imsic) {
+		pr_err("%pfwP: already initialized hence ignoring\n",
+			fwnode);
+		return -EALREADY;
+	}
+
+	if (!riscv_isa_extension_available(NULL, SxAIA)) {
+		pr_err("%pfwP: AIA support not available\n", fwnode);
+		return -ENODEV;
+	}
+
+	imsic = kzalloc(sizeof(*imsic), GFP_KERNEL);
+	if (!imsic)
+		return -ENOMEM;
+	imsic->fwnode = fwnode;
+	global = &imsic->global;
+
+	global->local = alloc_percpu(typeof(*(global->local)));
+	if (!global->local) {
+		rc = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	/* Find number of parent interrupts */
+	nr_parent_irqs = 0;
+	while (!imsic_get_parent_hartid(fwnode, nr_parent_irqs, &hartid))
+		nr_parent_irqs++;
+	if (!nr_parent_irqs) {
+		pr_err("%pfwP: no parent irqs available\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Find number of guest index bits in MSI address */
+	rc = fwnode_property_read_u32_array(fwnode, "riscv,guest-index-bits",
+					    &global->guest_index_bits, 1);
+	if (rc)
+		global->guest_index_bits = 0;
+	i = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT;
+	if (i < global->guest_index_bits) {
+		pr_err("%pfwP: guest index bits too big\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Find number of HART index bits */
+	rc = fwnode_property_read_u32_array(fwnode, "riscv,hart-index-bits",
+					    &global->hart_index_bits, 1);
+	if (rc) {
+		/* Assume default value */
+		global->hart_index_bits = __fls(nr_parent_irqs);
+		if (BIT(global->hart_index_bits) < nr_parent_irqs)
+			global->hart_index_bits++;
+	}
+	i = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT - global->guest_index_bits;
+	if (i < global->hart_index_bits) {
+		pr_err("%pfwP: HART index bits too big\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Find number of group index bits */
+	rc = fwnode_property_read_u32_array(fwnode, "riscv,group-index-bits",
+					    &global->group_index_bits, 1);
+	if (rc)
+		global->group_index_bits = 0;
+	i = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT -
+	    global->guest_index_bits - global->hart_index_bits;
+	if (i < global->group_index_bits) {
+		pr_err("%pfwP: group index bits too big\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/*
+	 * Find first bit position of group index.
+	 * If not specified assumed the default APLIC-IMSIC configuration.
+	 */
+	rc = fwnode_property_read_u32_array(fwnode, "riscv,group-index-shift",
+					    &global->group_index_shift, 1);
+	if (rc)
+		global->group_index_shift = IMSIC_MMIO_PAGE_SHIFT * 2;
+	i = global->group_index_bits + global->group_index_shift - 1;
+	if (i >= BITS_PER_LONG) {
+		pr_err("%pfwP: group index shift too big\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Find number of interrupt identities */
+	rc = fwnode_property_read_u32_array(fwnode, "riscv,num-ids",
+					    &global->nr_ids, 1);
+	if (rc) {
+		pr_err("%pfwP: number of interrupt identities not found\n",
+			fwnode);
+		goto out_free_local;
+	}
+	if ((global->nr_ids < IMSIC_MIN_ID) ||
+	    (global->nr_ids >= IMSIC_MAX_ID) ||
+	    ((global->nr_ids & IMSIC_MIN_ID) != IMSIC_MIN_ID)) {
+		pr_err("%pfwP: invalid number of interrupt identities\n",
+			fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Find number of guest interrupt identities */
+	if (fwnode_property_read_u32_array(fwnode, "riscv,num-guest-ids",
+					   &global->nr_guest_ids, 1))
+		global->nr_guest_ids = global->nr_ids;
+	if ((global->nr_guest_ids < IMSIC_MIN_ID) ||
+	    (global->nr_guest_ids >= IMSIC_MAX_ID) ||
+	    ((global->nr_guest_ids & IMSIC_MIN_ID) != IMSIC_MIN_ID)) {
+		pr_err("%pfwP: invalid number of guest interrupt identities\n",
+			fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+
+	/* Compute base address */
+	rc = imsic_get_mmio_resource(fwnode, 0, &res);
+	if (rc) {
+		pr_err("%pfwP: first MMIO resource not found\n", fwnode);
+		rc = -EINVAL;
+		goto out_free_local;
+	}
+	global->base_addr = res.start;
+	global->base_addr &= ~(BIT(global->guest_index_bits +
+				   global->hart_index_bits +
+				   IMSIC_MMIO_PAGE_SHIFT) - 1);
+	global->base_addr &= ~((BIT(global->group_index_bits) - 1) <<
+			       global->group_index_shift);
+
+	/* Find number of MMIO register sets */
+	while (!imsic_get_mmio_resource(fwnode, num_mmios, &res))
+		num_mmios++;
+
+	/* Allocate MMIO resource array */
+	mmios = kcalloc(num_mmios, sizeof(*mmios), GFP_KERNEL);
+	if (!mmios) {
+		rc = -ENOMEM;
+		goto out_free_local;
+	}
+
+	/* Allocate MMIO virtual address array */
+	mmios_va = kcalloc(num_mmios, sizeof(*mmios_va), GFP_KERNEL);
+	if (!mmios_va) {
+		rc = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	/* Parse and map MMIO register sets */
+	for (i = 0; i < num_mmios; i++) {
+		rc = imsic_get_mmio_resource(fwnode, i, &mmios[i]);
+		if (rc) {
+			pr_err("%pfwP: unable to parse MMIO regset %d\n",
+				fwnode, i);
+			goto out_iounmap;
+		}
+
+		base_addr = mmios[i].start;
+		base_addr &= ~(BIT(global->guest_index_bits +
+				   global->hart_index_bits +
+				   IMSIC_MMIO_PAGE_SHIFT) - 1);
+		base_addr &= ~((BIT(global->group_index_bits) - 1) <<
+			       global->group_index_shift);
+		if (base_addr != global->base_addr) {
+			rc = -EINVAL;
+			pr_err("%pfwP: address mismatch for regset %d\n",
+				fwnode, i);
+			goto out_iounmap;
+		}
+
+		mmios_va[i] = ioremap(mmios[i].start, resource_size(&mmios[i]));
+		if (!mmios_va[i]) {
+			rc = -EIO;
+			pr_err("%pfwP: unable to map MMIO regset %d\n",
+				fwnode, i);
+			goto out_iounmap;
+		}
+	}
+
+	/* Initialize interrupt identity management */
+	rc = imsic_ids_init();
+	if (rc) {
+		pr_err("%pfwP: failed to initialize interrupt management\n",
+		       fwnode);
+		goto out_iounmap;
+	}
+
+	/* Configure handlers for target CPUs */
+	for (i = 0; i < nr_parent_irqs; i++) {
+		rc = imsic_get_parent_hartid(fwnode, i, &hartid);
+		if (rc) {
+			pr_warn("%pfwP: hart ID for parent irq%d not found\n",
+				fwnode, i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			pr_warn("%pfwP: invalid cpuid for parent irq%d\n",
+				fwnode, i);
+			continue;
+		}
+
+		/* Find MMIO location of MSI page */
+		index = num_mmios;
+		reloff = i * BIT(global->guest_index_bits) *
+			 IMSIC_MMIO_PAGE_SZ;
+		for (j = 0; num_mmios; j++) {
+			if (reloff < resource_size(&mmios[j])) {
+				index = j;
+				break;
+			}
+
+			/*
+			 * MMIO region size may not be aligned to
+			 * BIT(global->guest_index_bits) * IMSIC_MMIO_PAGE_SZ
+			 * if holes are present.
+			 */
+			reloff -= ALIGN(resource_size(&mmios[j]),
+			BIT(global->guest_index_bits) * IMSIC_MMIO_PAGE_SZ);
+		}
+		if (index >= num_mmios) {
+			pr_warn("%pfwP: MMIO not found for parent irq%d\n",
+				fwnode, i);
+			continue;
+		}
+
+		local = per_cpu_ptr(global->local, cpu);
+		local->msi_pa = mmios[index].start + reloff;
+		local->msi_va = mmios_va[index] + reloff;
+
+		nr_handlers++;
+	}
+
+	/* If no CPU handlers found then can't take interrupts */
+	if (!nr_handlers) {
+		pr_err("%pfwP: No CPU handlers found\n", fwnode);
+		rc = -ENODEV;
+		goto out_ids_cleanup;
+	}
+
+	/* We don't need MMIO arrays anymore so let's free-up */
+	kfree(mmios_va);
+	kfree(mmios);
+
+	return 0;
+
+out_ids_cleanup:
+	imsic_ids_cleanup();
+out_iounmap:
+	for (i = 0; i < num_mmios; i++) {
+		if (mmios_va[i])
+			iounmap(mmios_va[i]);
+	}
+	kfree(mmios_va);
+	kfree(mmios);
+out_free_local:
+	free_percpu(imsic->global.local);
+out_free_priv:
+	kfree(imsic);
+	imsic = NULL;
+	return rc;
+}
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
new file mode 100644
index 000000000000..3170018949a8
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#ifndef _IRQ_RISCV_IMSIC_STATE_H
+#define _IRQ_RISCV_IMSIC_STATE_H
+
+#include <linux/irqchip/riscv-imsic.h>
+#include <linux/irqdomain.h>
+#include <linux/fwnode.h>
+
+struct imsic_priv {
+	/* Device details */
+	struct fwnode_handle *fwnode;
+
+	/* Global configuration common for all HARTs */
+	struct imsic_global_config global;
+
+	/* Global state of interrupt identities */
+	raw_spinlock_t ids_lock;
+	unsigned long *ids_used_bimap;
+	unsigned long *ids_enabled_bimap;
+	unsigned int *ids_target_cpu;
+
+	/* IPI interrupt identity and synchronization */
+	u32 ipi_id;
+	int ipi_virq;
+	struct irq_desc *ipi_lsync_desc;
+
+	/* IRQ domains (created by platform driver) */
+	struct irq_domain *base_domain;
+	struct irq_domain *plat_domain;
+};
+
+extern struct imsic_priv *imsic;
+
+void __imsic_eix_update(unsigned long base_id,
+			unsigned long num_id, bool pend, bool val);
+
+#define __imsic_id_enable(__id)		\
+	__imsic_eix_update((__id), 1, false, true)
+#define __imsic_id_disable(__id)	\
+	__imsic_eix_update((__id), 1, false, false)
+
+void imsic_id_set_target(unsigned int id, unsigned int target_cpu);
+unsigned int imsic_id_get_target(unsigned int id);
+
+void imsic_ids_local_sync(void);
+void imsic_ids_local_delivery(bool enable);
+
+#ifdef CONFIG_SMP
+void imsic_ids_remote_sync(void);
+#else
+static inline void imsic_ids_remote_sync(void)
+{
+}
+#endif
+
+int imsic_ids_alloc(unsigned int order);
+void imsic_ids_free(unsigned int base_id, unsigned int order);
+
+int imsic_setup_state(struct fwnode_handle *fwnode);
+
+#endif
diff --git a/include/linux/irqchip/riscv-imsic.h b/include/linux/irqchip/riscv-imsic.h
new file mode 100644
index 000000000000..1f6fc9a57218
--- /dev/null
+++ b/include/linux/irqchip/riscv-imsic.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+#ifndef __LINUX_IRQCHIP_RISCV_IMSIC_H
+#define __LINUX_IRQCHIP_RISCV_IMSIC_H
+
+#include <linux/types.h>
+#include <asm/csr.h>
+
+#define IMSIC_MMIO_PAGE_SHIFT		12
+#define IMSIC_MMIO_PAGE_SZ		(1UL << IMSIC_MMIO_PAGE_SHIFT)
+#define IMSIC_MMIO_PAGE_LE		0x00
+#define IMSIC_MMIO_PAGE_BE		0x04
+
+#define IMSIC_MIN_ID			63
+#define IMSIC_MAX_ID			2048
+
+#define IMSIC_EIDELIVERY		0x70
+
+#define IMSIC_EITHRESHOLD		0x72
+
+#define IMSIC_EIP0			0x80
+#define IMSIC_EIP63			0xbf
+#define IMSIC_EIPx_BITS			32
+
+#define IMSIC_EIE0			0xc0
+#define IMSIC_EIE63			0xff
+#define IMSIC_EIEx_BITS			32
+
+#define IMSIC_FIRST			IMSIC_EIDELIVERY
+#define IMSIC_LAST			IMSIC_EIE63
+
+#define IMSIC_MMIO_SETIPNUM_LE		0x00
+#define IMSIC_MMIO_SETIPNUM_BE		0x04
+
+struct imsic_local_config {
+	phys_addr_t msi_pa;
+	void __iomem *msi_va;
+};
+
+struct imsic_global_config {
+	/*
+	 * MSI Target Address Scheme
+	 *
+	 * XLEN-1                                                12     0
+	 * |                                                     |     |
+	 * -------------------------------------------------------------
+	 * |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index|  0  |
+	 * -------------------------------------------------------------
+	 */
+
+	/* Bits representing Guest index, HART index, and Group index */
+	u32 guest_index_bits;
+	u32 hart_index_bits;
+	u32 group_index_bits;
+	u32 group_index_shift;
+
+	/* Global base address matching all target MSI addresses */
+	phys_addr_t base_addr;
+
+	/* Number of interrupt identities */
+	u32 nr_ids;
+
+	/* Number of guest interrupt identities */
+	u32 nr_guest_ids;
+
+	/* Per-CPU IMSIC addresses */
+	struct imsic_local_config __percpu *local;
+};
+
+#ifdef CONFIG_RISCV_IMSIC
+
+extern const struct imsic_global_config *imsic_get_global_config(void);
+
+#else
+
+static inline const struct imsic_global_config *imsic_get_global_config(void)
+{
+	return NULL;
+}
+
+#endif
+
+#endif
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 08/14] irqchip/riscv-imsic: Add support for platform MSI irqdomain

[Anup Patel]

The Linux platform MSI support requires a platform MSI irqdomain so
let us add a platform irqchip driver for RISC-V IMSIC which provides
a base IRQ domain and platform MSI domain. This driver assumes that
the IMSIC state is already initialized by the IMSIC early driver.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Makefile                   |   2 +-
 drivers/irqchip/irq-riscv-imsic-platform.c | 280 +++++++++++++++++++++
 2 files changed, 281 insertions(+), 1 deletion(-)
 create mode 100644 drivers/irqchip/irq-riscv-imsic-platform.c

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index d714724387ce..abca445a3229 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -95,7 +95,7 @@ obj-$(CONFIG_QCOM_MPM)			+= irq-qcom-mpm.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
-obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o
+obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
 obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
new file mode 100644
index 000000000000..db896b6e51ff
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-imsic-state.h"
+
+static int imsic_cpu_page_phys(unsigned int cpu,
+			       unsigned int guest_index,
+			       phys_addr_t *out_msi_pa)
+{
+	struct imsic_global_config *global;
+	struct imsic_local_config *local;
+
+	global = &imsic->global;
+	local = per_cpu_ptr(global->local, cpu);
+
+	if (BIT(global->guest_index_bits) <= guest_index)
+		return -EINVAL;
+
+	if (out_msi_pa)
+		*out_msi_pa = local->msi_pa +
+			      (guest_index * IMSIC_MMIO_PAGE_SZ);
+
+	return 0;
+}
+
+static int imsic_get_cpu(const struct cpumask *mask_val, bool force,
+			 unsigned int *out_target_cpu)
+{
+	unsigned int cpu;
+
+	if (force)
+		cpu = cpumask_first(mask_val);
+	else
+		cpu = cpumask_any_and(mask_val, cpu_online_mask);
+
+	if (cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	if (out_target_cpu)
+		*out_target_cpu = cpu;
+
+	return 0;
+}
+
+static void imsic_irq_mask(struct irq_data *d)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	bitmap_clear(imsic->ids_enabled_bimap, d->hwirq, 1);
+	__imsic_id_disable(d->hwirq);
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+
+	imsic_ids_remote_sync();
+}
+
+static void imsic_irq_unmask(struct irq_data *d)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&imsic->ids_lock, flags);
+	bitmap_set(imsic->ids_enabled_bimap, d->hwirq, 1);
+	__imsic_id_enable(d->hwirq);
+	raw_spin_unlock_irqrestore(&imsic->ids_lock, flags);
+
+	imsic_ids_remote_sync();
+}
+
+static void imsic_irq_compose_msi_msg(struct irq_data *d,
+				      struct msi_msg *msg)
+{
+	phys_addr_t msi_addr;
+	unsigned int cpu;
+	int err;
+
+	cpu = imsic_id_get_target(d->hwirq);
+	if (WARN_ON(cpu == UINT_MAX))
+		return;
+
+	err = imsic_cpu_page_phys(cpu, 0, &msi_addr);
+	if (WARN_ON(err))
+		return;
+
+	msg->address_hi = upper_32_bits(msi_addr);
+	msg->address_lo = lower_32_bits(msi_addr);
+	msg->data = d->hwirq;
+}
+
+#ifdef CONFIG_SMP
+static int imsic_irq_set_affinity(struct irq_data *d,
+				  const struct cpumask *mask_val,
+				  bool force)
+{
+	unsigned int target_cpu;
+	int rc;
+
+	rc = imsic_get_cpu(mask_val, force, &target_cpu);
+	if (rc)
+		return rc;
+
+	imsic_id_set_target(d->hwirq, target_cpu);
+	irq_data_update_effective_affinity(d, cpumask_of(target_cpu));
+
+	return IRQ_SET_MASK_OK;
+}
+#endif
+
+static struct irq_chip imsic_irq_base_chip = {
+	.name			= "IMSIC-BASE",
+	.irq_mask		= imsic_irq_mask,
+	.irq_unmask		= imsic_irq_unmask,
+#ifdef CONFIG_SMP
+	.irq_set_affinity	= imsic_irq_set_affinity,
+#endif
+	.irq_compose_msi_msg	= imsic_irq_compose_msi_msg,
+	.flags			= IRQCHIP_SKIP_SET_WAKE |
+				  IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int imsic_irq_domain_alloc(struct irq_domain *domain,
+				  unsigned int virq,
+				  unsigned int nr_irqs,
+				  void *args)
+{
+	int i, hwirq, err = 0;
+	unsigned int cpu;
+
+	err = imsic_get_cpu(cpu_online_mask, false, &cpu);
+	if (err)
+		return err;
+
+	hwirq = imsic_ids_alloc(get_count_order(nr_irqs));
+	if (hwirq < 0)
+		return hwirq;
+
+	for (i = 0; i < nr_irqs; i++) {
+		imsic_id_set_target(hwirq + i, cpu);
+		irq_domain_set_info(domain, virq + i, hwirq + i,
+				    &imsic_irq_base_chip, imsic,
+				    handle_simple_irq, NULL, NULL);
+		irq_set_noprobe(virq + i);
+		irq_set_affinity(virq + i, cpu_online_mask);
+		/*
+		 * IMSIC does not implement irq_disable() so Linux interrupt
+		 * subsystem will take a lazy approach for disabling an IMSIC
+		 * interrupt. This means IMSIC interrupts are left unmasked
+		 * upon system suspend and interrupts are not processed
+		 * immediately upon system wake up. To tackle this, we disable
+		 * the lazy approach for all IMSIC interrupts.
+		 */
+		irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+	}
+
+	return 0;
+}
+
+static void imsic_irq_domain_free(struct irq_domain *domain,
+				  unsigned int virq,
+				  unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+
+	imsic_ids_free(d->hwirq, get_count_order(nr_irqs));
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops imsic_base_domain_ops = {
+	.alloc		= imsic_irq_domain_alloc,
+	.free		= imsic_irq_domain_free,
+};
+
+static struct irq_chip imsic_plat_irq_chip = {
+	.name			= "IMSIC-PLAT",
+};
+
+static struct msi_domain_ops imsic_plat_domain_ops = {
+};
+
+static struct msi_domain_info imsic_plat_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
+	.ops	= &imsic_plat_domain_ops,
+	.chip	= &imsic_plat_irq_chip,
+};
+
+static int __init imsic_irq_domains_init(struct device *dev)
+{
+	/* Create Base IRQ domain */
+	imsic->base_domain = irq_domain_create_tree(dev->fwnode,
+					&imsic_base_domain_ops, imsic);
+	if (!imsic->base_domain) {
+		dev_err(dev, "failed to create IMSIC base domain\n");
+		return -ENOMEM;
+	}
+	irq_domain_update_bus_token(imsic->base_domain, DOMAIN_BUS_NEXUS);
+
+	/* Create Platform MSI domain */
+	imsic->plat_domain = platform_msi_create_irq_domain(dev->fwnode,
+						&imsic_plat_domain_info,
+						imsic->base_domain);
+	if (!imsic->plat_domain) {
+		dev_err(dev, "failed to create IMSIC platform domain\n");
+		irq_domain_remove(imsic->base_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int imsic_platform_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imsic_global_config *global;
+	int rc;
+
+	if (!imsic) {
+		dev_err(dev, "early driver not probed\n");
+		return -ENODEV;
+	}
+
+	if (imsic->base_domain) {
+		dev_err(dev, "irq domain already created\n");
+		return -ENODEV;
+	}
+
+	global = &imsic->global;
+
+	/* Initialize IRQ and MSI domains */
+	rc = imsic_irq_domains_init(dev);
+	if (rc) {
+		dev_err(dev, "failed to initialize IRQ and MSI domains\n");
+		return rc;
+	}
+
+	dev_info(dev, "  hart-index-bits: %d,  guest-index-bits: %d\n",
+		 global->hart_index_bits, global->guest_index_bits);
+	dev_info(dev, " group-index-bits: %d, group-index-shift: %d\n",
+		 global->group_index_bits, global->group_index_shift);
+	dev_info(dev, " mapped %d interrupts at base PPN %pa\n",
+		 global->nr_ids, &global->base_addr);
+
+	return 0;
+}
+
+static const struct of_device_id imsic_platform_match[] = {
+	{ .compatible = "riscv,imsics" },
+	{}
+};
+
+static struct platform_driver imsic_platform_driver = {
+	.driver = {
+		.name		= "riscv-imsic",
+		.of_match_table	= imsic_platform_match,
+	},
+	.probe = imsic_platform_probe,
+};
+
+static int __init imsic_platform_init(void)
+{
+	/*
+	 * Register IMSIC driver as early as possible so that IMSIC
+	 * platform device is probed as soon as it is created.
+	 */
+	return platform_driver_register(&imsic_platform_driver);
+}
+core_initcall(imsic_platform_init);
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 09/14] irqchip/riscv-imsic: Add support for PCI MSI irqdomain

[Anup Patel]

The Linux PCI framework requires it's own dedicated MSI irqdomain so
let us create PCI MSI irqdomain as child of the IMSIC base irqdomain.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Kconfig                    |  7 ++++
 drivers/irqchip/irq-riscv-imsic-platform.c | 48 ++++++++++++++++++++++
 drivers/irqchip/irq-riscv-imsic-state.h    |  1 +
 3 files changed, 56 insertions(+)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 8ef18be5f37b..d700980372ef 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -550,6 +550,13 @@ config RISCV_IMSIC
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_MSI_IRQ
 
+config RISCV_IMSIC_PCI
+	bool
+	depends on RISCV_IMSIC
+	depends on PCI
+	depends on PCI_MSI
+	default RISCV_IMSIC
+
 config EXYNOS_IRQ_COMBINER
 	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
 	depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
index db896b6e51ff..02175e4e5cb9 100644
--- a/drivers/irqchip/irq-riscv-imsic-platform.c
+++ b/drivers/irqchip/irq-riscv-imsic-platform.c
@@ -12,6 +12,7 @@
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/msi.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/smp.h>
@@ -184,6 +185,39 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
 	.free		= imsic_irq_domain_free,
 };
 
+#ifdef CONFIG_RISCV_IMSIC_PCI
+
+static void imsic_pci_mask_irq(struct irq_data *d)
+{
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void imsic_pci_unmask_irq(struct irq_data *d)
+{
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}
+
+static struct irq_chip imsic_pci_irq_chip = {
+	.name			= "IMSIC-PCI",
+	.irq_mask		= imsic_pci_mask_irq,
+	.irq_unmask		= imsic_pci_unmask_irq,
+	.irq_eoi		= irq_chip_eoi_parent,
+};
+
+static struct msi_domain_ops imsic_pci_domain_ops = {
+};
+
+static struct msi_domain_info imsic_pci_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_PCI_MSIX | MSI_FLAG_MULTI_PCI_MSI),
+	.ops	= &imsic_pci_domain_ops,
+	.chip	= &imsic_pci_irq_chip,
+};
+
+#endif
+
 static struct irq_chip imsic_plat_irq_chip = {
 	.name			= "IMSIC-PLAT",
 };
@@ -208,12 +242,26 @@ static int __init imsic_irq_domains_init(struct device *dev)
 	}
 	irq_domain_update_bus_token(imsic->base_domain, DOMAIN_BUS_NEXUS);
 
+#ifdef CONFIG_RISCV_IMSIC_PCI
+	/* Create PCI MSI domain */
+	imsic->pci_domain = pci_msi_create_irq_domain(dev->fwnode,
+						&imsic_pci_domain_info,
+						imsic->base_domain);
+	if (!imsic->pci_domain) {
+		dev_err(dev, "failed to create IMSIC PCI domain\n");
+		irq_domain_remove(imsic->base_domain);
+		return -ENOMEM;
+	}
+#endif
+
 	/* Create Platform MSI domain */
 	imsic->plat_domain = platform_msi_create_irq_domain(dev->fwnode,
 						&imsic_plat_domain_info,
 						imsic->base_domain);
 	if (!imsic->plat_domain) {
 		dev_err(dev, "failed to create IMSIC platform domain\n");
+		if (imsic->pci_domain)
+			irq_domain_remove(imsic->pci_domain);
 		irq_domain_remove(imsic->base_domain);
 		return -ENOMEM;
 	}
diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h
index 3170018949a8..ff3c377b9b33 100644
--- a/drivers/irqchip/irq-riscv-imsic-state.h
+++ b/drivers/irqchip/irq-riscv-imsic-state.h
@@ -31,6 +31,7 @@ struct imsic_priv {
 
 	/* IRQ domains (created by platform driver) */
 	struct irq_domain *base_domain;
+	struct irq_domain *pci_domain;
 	struct irq_domain *plat_domain;
 };
 
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 10/14] dt-bindings: interrupt-controller: Add RISC-V advanced PLIC

[Anup Patel]

We add DT bindings document for RISC-V advanced platform level interrupt
controller (APLIC) defined by the RISC-V advanced interrupt architecture
(AIA) specification.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../interrupt-controller/riscv,aplic.yaml     | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
new file mode 100644
index 000000000000..190a6499c932
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Advanced Platform Level Interrupt Controller (APLIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description:
+  The RISC-V advanced interrupt architecture (AIA) defines an advanced
+  platform level interrupt controller (APLIC) for handling wired interrupts
+  in a RISC-V platform. The RISC-V AIA specification can be found at
+  https://github.com/riscv/riscv-aia.
+
+  The RISC-V APLIC is implemented as hierarchical APLIC domains where all
+  interrupt sources connect to the root APLIC domain and a parent APLIC
+  domain can delegate interrupt sources to it's child APLIC domains. There
+  is one device tree node for each APLIC domain.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,aplic
+      - const: riscv,aplic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Given APLIC domain directly injects external interrupts to a set of
+      RISC-V HARTS (or CPUs). Each node pointed to should be a riscv,cpu-intc
+      node, which has a CPU node (i.e. RISC-V HART) as parent.
+
+  msi-parent:
+    description:
+      Given APLIC domain forwards wired interrupts as MSIs to a AIA incoming
+      message signaled interrupt controller (IMSIC). If both "msi-parent" and
+      "interrupts-extended" properties are present then it means the APLIC
+      domain supports both MSI mode and Direct mode in HW. In this case, the
+      APLIC driver has to choose between MSI mode or Direct mode.
+
+  riscv,num-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 1023
+    description:
+      Specifies the number of wired interrupt sources supported by this
+      APLIC domain.
+
+  riscv,children:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      maxItems: 1
+    description:
+      A list of child APLIC domains for the given APLIC domain. Each child
+      APLIC domain is assigned a child index in increasing order, with the
+      first child APLIC domain assigned child index 0. The APLIC domain child
+      index is used by firmware to delegate interrupts from the given APLIC
+      domain to a particular child APLIC domain.
+
+  riscv,delegation:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      items:
+        - description: child APLIC domain phandle
+        - description: first interrupt number of the parent APLIC domain (inclusive)
+        - description: last interrupt number of the parent APLIC domain (inclusive)
+    description:
+      A interrupt delegation list where each entry is a triple consisting
+      of child APLIC domain phandle, first interrupt number of the parent
+      APLIC domain, and last interrupt number of the parent APLIC domain.
+      Firmware must configure interrupt delegation registers based on
+      interrupt delegation list.
+
+dependencies:
+  riscv,delegation: [ "riscv,children" ]
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - riscv,num-sources
+
+anyOf:
+  - required:
+      - interrupts-extended
+  - required:
+      - msi-parent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (APLIC domains directly injecting interrupt to HARTs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0xc000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic1>, <&aplic2>;
+      riscv,delegation = <&aplic1 1 63>;
+    };
+
+    aplic1: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>;
+      reg = <0xd000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+    aplic2: interrupt-controller@e000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0xe000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+  - |
+    // Example 2 (APLIC domains forwarding interrupts as MSIs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_mlevel>;
+      reg = <0xc000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic3>;
+      riscv,delegation = <&aplic3 1 63>;
+    };
+
+    aplic3: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_slevel>;
+      reg = <0xd000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+...
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 11/14] irqchip: Add RISC-V advanced PLIC driver for direct-mode

[Anup Patel]

The RISC-V advanced interrupt architecture (AIA) specification defines
advanced platform-level interrupt controller (APLIC) which has two modes
of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)

In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs)
as a local external interrupt.

We add a platform irqchip driver for the RISC-V APLIC direct-mode to
support RISC-V platforms having only wired interrupts.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Kconfig                  |   5 +
 drivers/irqchip/Makefile                 |   1 +
 drivers/irqchip/irq-riscv-aplic-direct.c | 326 +++++++++++++++++++++++
 drivers/irqchip/irq-riscv-aplic-main.c   | 240 +++++++++++++++++
 drivers/irqchip/irq-riscv-aplic-main.h   |  45 ++++
 include/linux/irqchip/riscv-aplic.h      | 119 +++++++++
 6 files changed, 736 insertions(+)
 create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c
 create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c
 create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h
 create mode 100644 include/linux/irqchip/riscv-aplic.h

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d700980372ef..8875065d8af9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -544,6 +544,11 @@ config SIFIVE_PLIC
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 
+config RISCV_APLIC
+	bool
+	depends on RISCV
+	select IRQ_DOMAIN_HIERARCHY
+
 config RISCV_IMSIC
 	bool
 	depends on RISCV
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index abca445a3229..7f8289790ed8 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM)			+= irq-qcom-mpm.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
+obj-$(CONFIG_RISCV_APLIC)		+= irq-riscv-aplic-main.o irq-riscv-aplic-direct.o
 obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
diff --git a/drivers/irqchip/irq-riscv-aplic-direct.c b/drivers/irqchip/irq-riscv-aplic-direct.c
new file mode 100644
index 000000000000..e36d655a1490
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-direct.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqchip/riscv-aplic.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-aplic-main.h"
+
+#define APLIC_DISABLE_IDELIVERY		0
+#define APLIC_ENABLE_IDELIVERY		1
+#define APLIC_DISABLE_ITHRESHOLD	1
+#define APLIC_ENABLE_ITHRESHOLD		0
+
+struct aplic_direct {
+	struct aplic_priv	priv;
+	struct irq_domain	*irqdomain;
+	struct cpumask		lmask;
+};
+
+struct aplic_idc {
+	unsigned int		hart_index;
+	void __iomem		*regs;
+	struct aplic_direct	*direct;
+};
+
+static unsigned int aplic_direct_parent_irq;
+static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs);
+
+static void aplic_direct_irq_eoi(struct irq_data *d)
+{
+	/*
+	 * The fasteoi_handler requires irq_eoi() callback hence
+	 * provide a dummy handler.
+	 */
+}
+
+#ifdef CONFIG_SMP
+static int aplic_direct_set_affinity(struct irq_data *d,
+				  const struct cpumask *mask_val, bool force)
+{
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+	struct aplic_direct *direct =
+			container_of(priv, struct aplic_direct, priv);
+	struct aplic_idc *idc;
+	unsigned int cpu, val;
+	struct cpumask amask;
+	void __iomem *target;
+
+	cpumask_and(&amask, &direct->lmask, mask_val);
+
+	if (force)
+		cpu = cpumask_first(&amask);
+	else
+		cpu = cpumask_any_and(&amask, cpu_online_mask);
+
+	if (cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	idc = per_cpu_ptr(&aplic_idcs, cpu);
+	target = priv->regs + APLIC_TARGET_BASE;
+	target += (d->hwirq - 1) * sizeof(u32);
+	val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
+	val <<= APLIC_TARGET_HART_IDX_SHIFT;
+	val |= APLIC_DEFAULT_PRIORITY;
+	writel(val, target);
+
+	irq_data_update_effective_affinity(d, cpumask_of(cpu));
+
+	return IRQ_SET_MASK_OK_DONE;
+}
+#endif
+
+static struct irq_chip aplic_direct_chip = {
+	.name		= "APLIC-DIRECT",
+	.irq_mask	= aplic_irq_mask,
+	.irq_unmask	= aplic_irq_unmask,
+	.irq_set_type	= aplic_irq_set_type,
+	.irq_eoi	= aplic_direct_irq_eoi,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = aplic_direct_set_affinity,
+#endif
+	.flags		= IRQCHIP_SET_TYPE_MASKED |
+			  IRQCHIP_SKIP_SET_WAKE |
+			  IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int aplic_direct_irqdomain_translate(struct irq_domain *d,
+					 struct irq_fwspec *fwspec,
+					 unsigned long *hwirq,
+					 unsigned int *type)
+{
+	struct aplic_priv *priv = d->host_data;
+
+	return aplic_irqdomain_translate(fwspec, priv->gsi_base,
+					 hwirq, type);
+}
+
+static int aplic_direct_irqdomain_alloc(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs,
+				     void *arg)
+{
+	int i, ret;
+	unsigned int type;
+	irq_hw_number_t hwirq;
+	struct irq_fwspec *fwspec = arg;
+	struct aplic_priv *priv = domain->host_data;
+	struct aplic_direct *direct =
+			container_of(priv, struct aplic_direct, priv);
+
+	ret = aplic_irqdomain_translate(fwspec, priv->gsi_base,
+					&hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_domain_set_info(domain, virq + i, hwirq + i,
+				    &aplic_direct_chip, priv,
+				    handle_fasteoi_irq, NULL, NULL);
+		irq_set_affinity(virq + i, &direct->lmask);
+		/* See the reason described in aplic_msi_irqdomain_alloc() */
+		irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops aplic_direct_irqdomain_ops = {
+	.translate	= aplic_direct_irqdomain_translate,
+	.alloc		= aplic_direct_irqdomain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+/*
+ * To handle an APLIC direct interrupts, we just read the CLAIMI register
+ * which will return highest priority pending interrupt and clear the
+ * pending bit of the interrupt. This process is repeated until CLAIMI
+ * register return zero value.
+ */
+static void aplic_direct_handle_irq(struct irq_desc *desc)
+{
+	struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_domain *irqdomain = idc->direct->irqdomain;
+	irq_hw_number_t hw_irq;
+	int irq;
+
+	chained_irq_enter(chip, desc);
+
+	while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
+		hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
+		irq = irq_find_mapping(irqdomain, hw_irq);
+
+		if (unlikely(irq <= 0))
+			dev_warn_ratelimited(idc->direct->priv.dev,
+					     "hw_irq %lu mapping not found\n",
+					     hw_irq);
+		else
+			generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en)
+{
+	u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY;
+	u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD;
+
+	/* Priority must be less than threshold for interrupt triggering */
+	writel(th, idc->regs + APLIC_IDC_ITHRESHOLD);
+
+	/* Delivery must be set to 1 for interrupt triggering */
+	writel(de, idc->regs + APLIC_IDC_IDELIVERY);
+}
+
+static int aplic_direct_dying_cpu(unsigned int cpu)
+{
+	if (aplic_direct_parent_irq)
+		disable_percpu_irq(aplic_direct_parent_irq);
+
+	return 0;
+}
+
+static int aplic_direct_starting_cpu(unsigned int cpu)
+{
+	if (aplic_direct_parent_irq)
+		enable_percpu_irq(aplic_direct_parent_irq,
+				irq_get_trigger_type(aplic_direct_parent_irq));
+
+	return 0;
+}
+
+int aplic_direct_setup(struct device *dev, void __iomem *regs)
+{
+	int i, j, rc, cpu, setup_count = 0;
+	struct fwnode_reference_args parent;
+	struct aplic_direct *direct;
+	struct aplic_priv *priv;
+	struct irq_domain *domain;
+	unsigned long hartid;
+	struct aplic_idc *idc;
+	u32 val;
+
+	direct = kzalloc(sizeof(*direct), GFP_KERNEL);
+	if (!direct)
+		return -ENOMEM;
+	priv = &direct->priv;
+
+	rc = aplic_setup_priv(priv, dev, regs);
+	if (rc) {
+		dev_err(dev, "failed to create APLIC context\n");
+		kfree(direct);
+		return rc;
+	}
+
+	/* Setup per-CPU IDC and target CPU mask */
+	for (i = 0; i < priv->nr_idcs; i++) {
+		rc = fwnode_property_get_reference_args(dev->fwnode,
+				"interrupts-extended", "#interrupt-cells",
+				0, i, &parent);
+		if (rc) {
+			dev_warn(dev, "parent irq for IDC%d not found\n", i);
+			continue;
+		}
+
+		/*
+		 * Skip interrupts other than external interrupts for
+		 * current privilege level.
+		 */
+		if (parent.args[0] != RV_IRQ_EXT)
+			continue;
+
+		rc = riscv_get_intc_hartid(parent.fwnode, &hartid);
+		if (rc) {
+			dev_warn(dev, "invalid hartid for IDC%d\n", i);
+			continue;
+		}
+
+		cpu = riscv_hartid_to_cpuid(hartid);
+		if (cpu < 0) {
+			dev_warn(dev, "invalid cpuid for IDC%d\n", i);
+			continue;
+		}
+
+		cpumask_set_cpu(cpu, &direct->lmask);
+
+		idc = per_cpu_ptr(&aplic_idcs, cpu);
+		idc->hart_index = i;
+		idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE;
+		idc->direct = direct;
+
+		aplic_idc_set_delivery(idc, true);
+
+		/*
+		 * Boot cpu might not have APLIC hart_index = 0 so check
+		 * and update target registers of all interrupts.
+		 */
+		if (cpu == smp_processor_id() && idc->hart_index) {
+			val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
+			val <<= APLIC_TARGET_HART_IDX_SHIFT;
+			val |= APLIC_DEFAULT_PRIORITY;
+			for (j = 1; j <= priv->nr_irqs; j++)
+				writel(val, priv->regs + APLIC_TARGET_BASE +
+					    (j - 1) * sizeof(u32));
+		}
+
+		setup_count++;
+	}
+
+	/* Find parent domain and register chained handler */
+	domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+					  DOMAIN_BUS_ANY);
+	if (!aplic_direct_parent_irq && domain) {
+		aplic_direct_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
+		if (aplic_direct_parent_irq) {
+			irq_set_chained_handler(aplic_direct_parent_irq,
+						aplic_direct_handle_irq);
+
+			/*
+			 * Setup CPUHP notifier to enable parent
+			 * interrupt on all CPUs
+			 */
+			cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+					  "irqchip/riscv/aplic:starting",
+					  aplic_direct_starting_cpu,
+					  aplic_direct_dying_cpu);
+		}
+	}
+
+	/* Fail if we were not able to setup IDC for any CPU */
+	if (!setup_count) {
+		kfree(direct);
+		return -ENODEV;
+	}
+
+	/* Setup global config and interrupt delivery */
+	aplic_init_hw_global(priv, false);
+
+	/* Create irq domain instance for the APLIC */
+	direct->irqdomain = irq_domain_create_linear(dev->fwnode,
+						   priv->nr_irqs + 1,
+						   &aplic_direct_irqdomain_ops,
+						   priv);
+	if (!direct->irqdomain) {
+		dev_err(dev, "failed to create direct irq domain\n");
+		kfree(direct);
+		return -ENOMEM;
+	}
+
+	/* Advertise the interrupt controller */
+	dev_info(dev, "%d interrupts directly connected to %d CPUs\n",
+		 priv->nr_irqs, priv->nr_idcs);
+
+	return 0;
+}
diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c
new file mode 100644
index 000000000000..d62a096774c4
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-main.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/printk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip/riscv-aplic.h>
+
+#include "irq-riscv-aplic-main.h"
+
+void aplic_irq_unmask(struct irq_data *d)
+{
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+	writel(d->hwirq, priv->regs + APLIC_SETIENUM);
+}
+
+void aplic_irq_mask(struct irq_data *d)
+{
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+	writel(d->hwirq, priv->regs + APLIC_CLRIENUM);
+}
+
+int aplic_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	u32 val = 0;
+	void __iomem *sourcecfg;
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		val = APLIC_SOURCECFG_SM_INACTIVE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val = APLIC_SOURCECFG_SM_LEVEL_LOW;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val = APLIC_SOURCECFG_SM_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val = APLIC_SOURCECFG_SM_EDGE_FALL;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		val = APLIC_SOURCECFG_SM_EDGE_RISE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sourcecfg = priv->regs + APLIC_SOURCECFG_BASE;
+	sourcecfg += (d->hwirq - 1) * sizeof(u32);
+	writel(val, sourcecfg);
+
+	return 0;
+}
+
+int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base,
+			      unsigned long *hwirq, unsigned int *type)
+{
+	if (WARN_ON(fwspec->param_count < 2))
+		return -EINVAL;
+	if (WARN_ON(!fwspec->param[0]))
+		return -EINVAL;
+
+	/* For DT, gsi_base is always zero. */
+	*hwirq = fwspec->param[0] - gsi_base;
+	*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+
+	WARN_ON(*type == IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode)
+{
+	u32 val;
+#ifdef CONFIG_RISCV_M_MODE
+	u32 valH;
+
+	if (msi_mode) {
+		val = priv->msicfg.base_ppn;
+		valH = ((u64)priv->msicfg.base_ppn >> 32) &
+			APLIC_xMSICFGADDRH_BAPPN_MASK;
+		valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK)
+			<< APLIC_xMSICFGADDRH_LHXW_SHIFT;
+		valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK)
+			<< APLIC_xMSICFGADDRH_HHXW_SHIFT;
+		valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK)
+			<< APLIC_xMSICFGADDRH_LHXS_SHIFT;
+		valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK)
+			<< APLIC_xMSICFGADDRH_HHXS_SHIFT;
+		writel(val, priv->regs + APLIC_xMSICFGADDR);
+		writel(valH, priv->regs + APLIC_xMSICFGADDRH);
+	}
+#endif
+
+	/* Setup APLIC domaincfg register */
+	val = readl(priv->regs + APLIC_DOMAINCFG);
+	val |= APLIC_DOMAINCFG_IE;
+	if (msi_mode)
+		val |= APLIC_DOMAINCFG_DM;
+	writel(val, priv->regs + APLIC_DOMAINCFG);
+	if (readl(priv->regs + APLIC_DOMAINCFG) != val)
+		dev_warn(priv->dev, "unable to write 0x%x in domaincfg\n",
+			 val);
+}
+
+static void aplic_init_hw_irqs(struct aplic_priv *priv)
+{
+	int i;
+
+	/* Disable all interrupts */
+	for (i = 0; i <= priv->nr_irqs; i += 32)
+		writel(-1U, priv->regs + APLIC_CLRIE_BASE +
+			    (i / 32) * sizeof(u32));
+
+	/* Set interrupt type and default priority for all interrupts */
+	for (i = 1; i <= priv->nr_irqs; i++) {
+		writel(0, priv->regs + APLIC_SOURCECFG_BASE +
+			  (i - 1) * sizeof(u32));
+		writel(APLIC_DEFAULT_PRIORITY,
+		       priv->regs + APLIC_TARGET_BASE +
+		       (i - 1) * sizeof(u32));
+	}
+
+	/* Clear APLIC domaincfg */
+	writel(0, priv->regs + APLIC_DOMAINCFG);
+}
+
+int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
+		     void __iomem *regs)
+{
+	struct fwnode_reference_args parent;
+	int rc;
+
+	/* Save device pointer and register base */
+	priv->dev = dev;
+	priv->regs = regs;
+
+	/*
+	 * Find out GSI base number
+	 *
+	 * Note: DT does not define "riscv,gsi-base" property so GSI
+	 * base is always zero for DT.
+	 */
+	rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,gsi-base",
+					    &priv->gsi_base, 1);
+	if (rc)
+		priv->gsi_base = 0;
+
+	/* Find out number of interrupt sources */
+	rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,num-sources",
+					    &priv->nr_irqs, 1);
+	if (rc) {
+		dev_err(dev, "failed to get number of interrupt sources\n");
+		return rc;
+	}
+
+	/* Setup initial state APLIC interrupts */
+	aplic_init_hw_irqs(priv);
+
+	/*
+	 * Find out number of IDCs based on parent interrupts
+	 *
+	 * If "msi-parent" property is present then we ignore the
+	 * APLIC IDCs which forces the APLIC driver to use MSI mode.
+	 */
+	if (!fwnode_property_present(dev->fwnode, "msi-parent")) {
+		while (!fwnode_property_get_reference_args(dev->fwnode,
+				"interrupts-extended", "#interrupt-cells",
+				0, priv->nr_idcs, &parent))
+			priv->nr_idcs++;
+	}
+
+	return 0;
+}
+
+static int aplic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *regs;
+	int rc;
+
+	/* Map the MMIO registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "failed to get MMIO resource\n");
+		return -EINVAL;
+	}
+	regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!regs) {
+		dev_err(dev, "failed map MMIO registers\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * If msi-parent property is present then setup APLIC MSI mode
+	 * otherwise setup APLIC direct mode.
+	 */
+	if (fwnode_property_present(dev->fwnode, "msi-parent"))
+		rc = -ENODEV;
+	else
+		rc = aplic_direct_setup(dev, regs);
+	if (rc) {
+		dev_err(dev, "failed setup APLIC in %s mode\n",
+			fwnode_property_present(dev->fwnode, "msi-parent") ?
+			"MSI" : "direct");
+		return rc;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id aplic_match[] = {
+	{ .compatible = "riscv,aplic" },
+	{}
+};
+
+static struct platform_driver aplic_driver = {
+	.driver = {
+		.name		= "riscv-aplic",
+		.of_match_table	= aplic_match,
+	},
+	.probe = aplic_probe,
+};
+
+static int __init aplic_init(void)
+{
+	/*
+	 * Register APLIC driver as early as possible so that APLIC
+	 * platform device is probed as soon as it is created.
+	 */
+	return platform_driver_register(&aplic_driver);
+}
+core_initcall(aplic_init);
diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h
new file mode 100644
index 000000000000..474a04229334
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-main.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#ifndef _IRQ_RISCV_APLIC_MAIN_H
+#define _IRQ_RISCV_APLIC_MAIN_H
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/fwnode.h>
+
+#define APLIC_DEFAULT_PRIORITY		1
+
+struct aplic_msicfg {
+	phys_addr_t		base_ppn;
+	u32			hhxs;
+	u32			hhxw;
+	u32			lhxs;
+	u32			lhxw;
+};
+
+struct aplic_priv {
+	struct device		*dev;
+	u32			gsi_base;
+	u32			nr_irqs;
+	u32			nr_idcs;
+	void __iomem		*regs;
+	struct aplic_msicfg	msicfg;
+};
+
+void aplic_irq_unmask(struct irq_data *d);
+void aplic_irq_mask(struct irq_data *d);
+int aplic_irq_set_type(struct irq_data *d, unsigned int type);
+int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base,
+			      unsigned long *hwirq, unsigned int *type);
+void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode);
+int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
+		     void __iomem *regs);
+int aplic_direct_setup(struct device *dev, void __iomem *regs);
+
+#endif
diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h
new file mode 100644
index 000000000000..97e198ea0109
--- /dev/null
+++ b/include/linux/irqchip/riscv-aplic.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H
+#define __LINUX_IRQCHIP_RISCV_APLIC_H
+
+#include <linux/bitops.h>
+
+#define APLIC_MAX_IDC			BIT(14)
+#define APLIC_MAX_SOURCE		1024
+
+#define APLIC_DOMAINCFG			0x0000
+#define APLIC_DOMAINCFG_RDONLY		0x80000000
+#define APLIC_DOMAINCFG_IE		BIT(8)
+#define APLIC_DOMAINCFG_DM		BIT(2)
+#define APLIC_DOMAINCFG_BE		BIT(0)
+
+#define APLIC_SOURCECFG_BASE		0x0004
+#define APLIC_SOURCECFG_D		BIT(10)
+#define APLIC_SOURCECFG_CHILDIDX_MASK	0x000003ff
+#define APLIC_SOURCECFG_SM_MASK	0x00000007
+#define APLIC_SOURCECFG_SM_INACTIVE	0x0
+#define APLIC_SOURCECFG_SM_DETACH	0x1
+#define APLIC_SOURCECFG_SM_EDGE_RISE	0x4
+#define APLIC_SOURCECFG_SM_EDGE_FALL	0x5
+#define APLIC_SOURCECFG_SM_LEVEL_HIGH	0x6
+#define APLIC_SOURCECFG_SM_LEVEL_LOW	0x7
+
+#define APLIC_MMSICFGADDR		0x1bc0
+#define APLIC_MMSICFGADDRH		0x1bc4
+#define APLIC_SMSICFGADDR		0x1bc8
+#define APLIC_SMSICFGADDRH		0x1bcc
+
+#ifdef CONFIG_RISCV_M_MODE
+#define APLIC_xMSICFGADDR		APLIC_MMSICFGADDR
+#define APLIC_xMSICFGADDRH		APLIC_MMSICFGADDRH
+#else
+#define APLIC_xMSICFGADDR		APLIC_SMSICFGADDR
+#define APLIC_xMSICFGADDRH		APLIC_SMSICFGADDRH
+#endif
+
+#define APLIC_xMSICFGADDRH_L		BIT(31)
+#define APLIC_xMSICFGADDRH_HHXS_MASK	0x1f
+#define APLIC_xMSICFGADDRH_HHXS_SHIFT	24
+#define APLIC_xMSICFGADDRH_LHXS_MASK	0x7
+#define APLIC_xMSICFGADDRH_LHXS_SHIFT	20
+#define APLIC_xMSICFGADDRH_HHXW_MASK	0x7
+#define APLIC_xMSICFGADDRH_HHXW_SHIFT	16
+#define APLIC_xMSICFGADDRH_LHXW_MASK	0xf
+#define APLIC_xMSICFGADDRH_LHXW_SHIFT	12
+#define APLIC_xMSICFGADDRH_BAPPN_MASK	0xfff
+
+#define APLIC_xMSICFGADDR_PPN_SHIFT	12
+
+#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \
+	(BIT(__lhxs) - 1)
+
+#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \
+	(BIT(__lhxw) - 1)
+#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \
+	((__lhxs))
+#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \
+	(APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \
+	 APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs))
+
+#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \
+	(BIT(__hhxw) - 1)
+#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \
+	((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT)
+#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \
+	(APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \
+	 APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs))
+
+#define APLIC_IRQBITS_PER_REG		32
+
+#define APLIC_SETIP_BASE		0x1c00
+#define APLIC_SETIPNUM			0x1cdc
+
+#define APLIC_CLRIP_BASE		0x1d00
+#define APLIC_CLRIPNUM			0x1ddc
+
+#define APLIC_SETIE_BASE		0x1e00
+#define APLIC_SETIENUM			0x1edc
+
+#define APLIC_CLRIE_BASE		0x1f00
+#define APLIC_CLRIENUM			0x1fdc
+
+#define APLIC_SETIPNUM_LE		0x2000
+#define APLIC_SETIPNUM_BE		0x2004
+
+#define APLIC_GENMSI			0x3000
+
+#define APLIC_TARGET_BASE		0x3004
+#define APLIC_TARGET_HART_IDX_SHIFT	18
+#define APLIC_TARGET_HART_IDX_MASK	0x3fff
+#define APLIC_TARGET_GUEST_IDX_SHIFT	12
+#define APLIC_TARGET_GUEST_IDX_MASK	0x3f
+#define APLIC_TARGET_IPRIO_MASK	0xff
+#define APLIC_TARGET_EIID_MASK	0x7ff
+
+#define APLIC_IDC_BASE			0x4000
+#define APLIC_IDC_SIZE			32
+
+#define APLIC_IDC_IDELIVERY		0x00
+
+#define APLIC_IDC_IFORCE		0x04
+
+#define APLIC_IDC_ITHRESHOLD		0x08
+
+#define APLIC_IDC_TOPI			0x18
+#define APLIC_IDC_TOPI_ID_SHIFT	16
+#define APLIC_IDC_TOPI_ID_MASK	0x3ff
+#define APLIC_IDC_TOPI_PRIO_MASK	0xff
+
+#define APLIC_IDC_CLAIMI		0x1c
+
+#endif
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 12/14] irqchip/riscv-aplic: Add support for MSI-mode

[Anup Patel]

The RISC-V advanced platform-level interrupt controller (APLIC) has
two modes of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)

In APLIC MSI-mode, wired interrupts are forwared as message signaled
interrupts (MSIs) to CPUs via IMSIC.

We extend the existing APLIC irqchip driver to support MSI-mode for
RISC-V platforms having both wired interrupts and MSIs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/irqchip/Kconfig                |   6 +
 drivers/irqchip/Makefile               |   1 +
 drivers/irqchip/irq-riscv-aplic-main.c |   2 +-
 drivers/irqchip/irq-riscv-aplic-main.h |   8 +
 drivers/irqchip/irq-riscv-aplic-msi.c  | 285 +++++++++++++++++++++++++
 5 files changed, 301 insertions(+), 1 deletion(-)
 create mode 100644 drivers/irqchip/irq-riscv-aplic-msi.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 8875065d8af9..1a337ab9dd41 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -549,6 +549,12 @@ config RISCV_APLIC
 	depends on RISCV
 	select IRQ_DOMAIN_HIERARCHY
 
+config RISCV_APLIC_MSI
+	bool
+	depends on RISCV_APLIC
+	select GENERIC_MSI_IRQ
+	default RISCV_APLIC
+
 config RISCV_IMSIC
 	bool
 	depends on RISCV
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 7f8289790ed8..47995fdb2c60 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
 obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
 obj-$(CONFIG_RISCV_INTC)		+= irq-riscv-intc.o
 obj-$(CONFIG_RISCV_APLIC)		+= irq-riscv-aplic-main.o irq-riscv-aplic-direct.o
+obj-$(CONFIG_RISCV_APLIC_MSI)		+= irq-riscv-aplic-msi.o
 obj-$(CONFIG_RISCV_IMSIC)		+= irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
 obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
 obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c
index d62a096774c4..f225ac77ea3c 100644
--- a/drivers/irqchip/irq-riscv-aplic-main.c
+++ b/drivers/irqchip/irq-riscv-aplic-main.c
@@ -203,7 +203,7 @@ static int aplic_probe(struct platform_device *pdev)
 	 * otherwise setup APLIC direct mode.
 	 */
 	if (fwnode_property_present(dev->fwnode, "msi-parent"))
-		rc = -ENODEV;
+		rc = aplic_msi_setup(dev, regs);
 	else
 		rc = aplic_direct_setup(dev, regs);
 	if (rc) {
diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h
index 474a04229334..78267ec58098 100644
--- a/drivers/irqchip/irq-riscv-aplic-main.h
+++ b/drivers/irqchip/irq-riscv-aplic-main.h
@@ -41,5 +41,13 @@ void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode);
 int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
 		     void __iomem *regs);
 int aplic_direct_setup(struct device *dev, void __iomem *regs);
+#ifdef CONFIG_RISCV_APLIC_MSI
+int aplic_msi_setup(struct device *dev, void __iomem *regs);
+#else
+static inline int aplic_msi_setup(struct device *dev, void __iomem *regs)
+{
+	return -ENODEV;
+}
+#endif
 
 #endif
diff --git a/drivers/irqchip/irq-riscv-aplic-msi.c b/drivers/irqchip/irq-riscv-aplic-msi.c
new file mode 100644
index 000000000000..086d00e0429e
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-msi.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/riscv-aplic.h>
+#include <linux/irqchip/riscv-imsic.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-aplic-main.h"
+
+static void aplic_msi_irq_unmask(struct irq_data *d)
+{
+	aplic_irq_unmask(d);
+	irq_chip_unmask_parent(d);
+}
+
+static void aplic_msi_irq_mask(struct irq_data *d)
+{
+	aplic_irq_mask(d);
+	irq_chip_mask_parent(d);
+}
+
+static void aplic_msi_irq_eoi(struct irq_data *d)
+{
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+	u32 reg_off, reg_mask;
+
+	/*
+	 * EOI handling only required only for level-triggered
+	 * interrupts in APLIC MSI mode.
+	 */
+
+	reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4);
+	reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG);
+	switch (irqd_get_trigger_type(d)) {
+	case IRQ_TYPE_LEVEL_LOW:
+		if (!(readl(priv->regs + reg_off) & reg_mask))
+			writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		if (readl(priv->regs + reg_off) & reg_mask)
+			writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE);
+		break;
+	}
+}
+
+static struct irq_chip aplic_msi_chip = {
+	.name		= "APLIC-MSI",
+	.irq_mask	= aplic_msi_irq_mask,
+	.irq_unmask	= aplic_msi_irq_unmask,
+	.irq_set_type	= aplic_irq_set_type,
+	.irq_eoi	= aplic_msi_irq_eoi,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+	.flags		= IRQCHIP_SET_TYPE_MASKED |
+			  IRQCHIP_SKIP_SET_WAKE |
+			  IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int aplic_msi_irqdomain_translate(struct irq_domain *d,
+					 struct irq_fwspec *fwspec,
+					 unsigned long *hwirq,
+					 unsigned int *type)
+{
+	struct aplic_priv *priv = platform_msi_get_host_data(d);
+
+	return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type);
+}
+
+static int aplic_msi_irqdomain_alloc(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs,
+				     void *arg)
+{
+	int i, ret;
+	unsigned int type;
+	irq_hw_number_t hwirq;
+	struct irq_fwspec *fwspec = arg;
+	struct aplic_priv *priv = platform_msi_get_host_data(domain);
+
+	ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_domain_set_info(domain, virq + i, hwirq + i,
+				    &aplic_msi_chip, priv, handle_fasteoi_irq,
+				    NULL, NULL);
+		/*
+		 * APLIC does not implement irq_disable() so Linux interrupt
+		 * subsystem will take a lazy approach for disabling an APLIC
+		 * interrupt. This means APLIC interrupts are left unmasked
+		 * upon system suspend and interrupts are not processed
+		 * immediately upon system wake up. To tackle this, we disable
+		 * the lazy approach for all APLIC interrupts.
+		 */
+		irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops aplic_msi_irqdomain_ops = {
+	.translate	= aplic_msi_irqdomain_translate,
+	.alloc		= aplic_msi_irqdomain_alloc,
+	.free		= platform_msi_device_domain_free,
+};
+
+static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	unsigned int group_index, hart_index, guest_index, val;
+	struct irq_data *d = irq_get_irq_data(desc->irq);
+	struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+	struct aplic_msicfg *mc = &priv->msicfg;
+	phys_addr_t tppn, tbppn, msg_addr;
+	void __iomem *target;
+
+	/* For zeroed MSI, simply write zero into the target register */
+	if (!msg->address_hi && !msg->address_lo && !msg->data) {
+		target = priv->regs + APLIC_TARGET_BASE;
+		target += (d->hwirq - 1) * sizeof(u32);
+		writel(0, target);
+		return;
+	}
+
+	/* Sanity check on message data */
+	WARN_ON(msg->data > APLIC_TARGET_EIID_MASK);
+
+	/* Compute target MSI address */
+	msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo;
+	tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
+
+	/* Compute target HART Base PPN */
+	tbppn = tppn;
+	tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
+	tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
+	tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
+	WARN_ON(tbppn != mc->base_ppn);
+
+	/* Compute target group and hart indexes */
+	group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) &
+		     APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw);
+	hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) &
+		     APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw);
+	hart_index |= (group_index << mc->lhxw);
+	WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK);
+
+	/* Compute target guest index */
+	guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
+	WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK);
+
+	/* Update IRQ TARGET register */
+	target = priv->regs + APLIC_TARGET_BASE;
+	target += (d->hwirq - 1) * sizeof(u32);
+	val = (hart_index & APLIC_TARGET_HART_IDX_MASK)
+				<< APLIC_TARGET_HART_IDX_SHIFT;
+	val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK)
+				<< APLIC_TARGET_GUEST_IDX_SHIFT;
+	val |= (msg->data & APLIC_TARGET_EIID_MASK);
+	writel(val, target);
+}
+
+int aplic_msi_setup(struct device *dev, void __iomem *regs)
+{
+	const struct imsic_global_config *imsic_global;
+	struct irq_domain *irqdomain;
+	struct aplic_priv *priv;
+	struct aplic_msicfg *mc;
+	phys_addr_t pa;
+	int rc;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	rc = aplic_setup_priv(priv, dev, regs);
+	if (!priv) {
+		dev_err(dev, "failed to create APLIC context\n");
+		return rc;
+	}
+	mc = &priv->msicfg;
+
+	/*
+	 * The APLIC outgoing MSI config registers assume target MSI
+	 * controller to be RISC-V AIA IMSIC controller.
+	 */
+	imsic_global = imsic_get_global_config();
+	if (!imsic_global) {
+		dev_err(dev, "IMSIC global config not found\n");
+		return -ENODEV;
+	}
+
+	/* Find number of guest index bits (LHXS) */
+	mc->lhxs = imsic_global->guest_index_bits;
+	if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) {
+		dev_err(dev, "IMSIC guest index bits big for APLIC LHXS\n");
+		return -EINVAL;
+	}
+
+	/* Find number of HART index bits (LHXW) */
+	mc->lhxw = imsic_global->hart_index_bits;
+	if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) {
+		dev_err(dev, "IMSIC hart index bits big for APLIC LHXW\n");
+		return -EINVAL;
+	}
+
+	/* Find number of group index bits (HHXW) */
+	mc->hhxw = imsic_global->group_index_bits;
+	if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) {
+		dev_err(dev, "IMSIC group index bits big for APLIC HHXW\n");
+		return -EINVAL;
+	}
+
+	/* Find first bit position of group index (HHXS) */
+	mc->hhxs = imsic_global->group_index_shift;
+	if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) {
+		dev_err(dev, "IMSIC group index shift should be >= %d\n",
+			(2 * APLIC_xMSICFGADDR_PPN_SHIFT));
+		return -EINVAL;
+	}
+	mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT);
+	if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) {
+		dev_err(dev, "IMSIC group index shift big for APLIC HHXS\n");
+		return -EINVAL;
+	}
+
+	/* Compute PPN base */
+	mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT;
+	mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs);
+	mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs);
+	mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs);
+
+	/* Setup global config and interrupt delivery */
+	aplic_init_hw_global(priv, true);
+
+	/* Set the APLIC device MSI domain if not available */
+	if (!dev_get_msi_domain(dev)) {
+		/*
+		 * The device MSI domain for OF devices is only set at the
+		 * time of populating/creating OF device. If the device MSI
+		 * domain is discovered later after the OF device is created
+		 * then we need to set it explicitly before using any platform
+		 * MSI functions.
+		 *
+		 * In case of APLIC device, the parent MSI domain is always
+		 * IMSIC and the IMSIC MSI domains are created later through
+		 * the platform driver probing so we set it explicitly here.
+		 */
+		if (is_of_node(dev->fwnode))
+			of_msi_configure(dev, to_of_node(dev->fwnode));
+	}
+
+	/* Create irq domain instance for the APLIC MSI-mode */
+	irqdomain = platform_msi_create_device_domain(
+						dev, priv->nr_irqs + 1,
+						aplic_msi_write_msg,
+						&aplic_msi_irqdomain_ops,
+						priv);
+	if (!irqdomain) {
+		dev_err(dev, "failed to create MSI irq domain\n");
+		return -ENOMEM;
+	}
+
+	/* Advertise the interrupt controller */
+	pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT;
+	dev_info(dev, "%d interrupts forwared to MSI base %pa\n",
+		 priv->nr_irqs, &pa);
+
+	return 0;
+}
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 13/14] RISC-V: Select APLIC and IMSIC drivers

[Anup Patel]

The QEMU virt machine supports AIA emulation and we also have
quite a few RISC-V platforms with AIA support under development
so let us select APLIC and IMSIC drivers for all RISC-V platforms.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 4c07b9189c86..318f62a0a187 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -148,6 +148,8 @@ config RISCV
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_MSI if PCI
 	select RISCV_ALTERNATIVE if !XIP_KERNEL
+	select RISCV_APLIC
+	select RISCV_IMSIC
 	select RISCV_INTC
 	select RISCV_TIMER if RISCV_SBI
 	select SIFIVE_PLIC
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v6 14/14] MAINTAINERS: Add entry for RISC-V AIA drivers

[Anup Patel]

Add myself as maintainer for RISC-V AIA drivers including the
RISC-V INTC driver which supports both AIA and non-AIA platforms.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 MAINTAINERS | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index aee340630eca..ef7af65441a1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18256,6 +18256,20 @@ S:	Maintained
 F:	drivers/mtd/nand/raw/r852.c
 F:	drivers/mtd/nand/raw/r852.h
 
+RISC-V AIA DRIVERS
+M:	Anup Patel <anup@brainfault.org>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
+F:	drivers/irqchip/irq-riscv-aplic-*.c
+F:	drivers/irqchip/irq-riscv-aplic-*.h
+F:	drivers/irqchip/irq-riscv-imsic-*.c
+F:	drivers/irqchip/irq-riscv-imsic-*.h
+F:	drivers/irqchip/irq-riscv-intc.c
+F:	include/linux/irqchip/riscv-aplic.h
+F:	include/linux/irqchip/riscv-imsic.h
+
 RISC-V ARCHITECTURE
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 03/14] drivers: irqchip/riscv-intc: Mark all INTC nodes as initialized

[Saravana Kannan]

On Wed, Jul 19, 2023 at 4:36 AM Anup Patel <apatel@ventanamicro.com> wrote:
>
> The RISC-V INTC local interrupts are per-HART (or per-CPU) so
> we create INTC IRQ domain only for the INTC node belonging to
> the boot HART. This means only the boot HART INTC node will be
> marked as initialized and other INTC nodes won't be marked which
> results downstream interrupt controllers (such as IMSIC and APLIC
> direct-mode) not being probed due to missing device suppliers.
>
> To address this issue, we mark all INTC node for which we don't
> create IRQ domain as initialized.
>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/irqchip/irq-riscv-intc.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> index 65f4a2afb381..4e2704bc25fb 100644
> --- a/drivers/irqchip/irq-riscv-intc.c
> +++ b/drivers/irqchip/irq-riscv-intc.c
> @@ -155,8 +155,16 @@ static int __init riscv_intc_init(struct device_node *node,
>          * for each INTC DT node. We only need to do INTC initialization
>          * for the INTC DT node belonging to boot CPU (or boot HART).
>          */
> -       if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
> +       if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) {
> +               /*
> +                * The INTC nodes of each CPU are suppliers for downstream
> +                * interrupt controllers (such as IMSIC and APLIC direct-mode)
> +                * so we should mark an INTC node as initialized if we are
> +                * not creating IRQ domain for it.
> +                */

I'm a bit confused by this. If those non-boot CPUs INTC doesn't have
an IRQ domain, why are the downstream interrupt controllers listing
these non-boot CPU INTCs as an upstream interrupt controller?

This is more of a question of the existing behavior that this patch,
but this patch highlights the existing oddity.

-Saravana

> +               fwnode_dev_initialized(of_fwnode_handle(node), true);
>                 return 0;
> +       }
>
>         return riscv_intc_init_common(of_node_to_fwnode(node));
>  }
> --
> 2.34.1
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 02/14] of: property: Add fw_devlink support for msi-parent

[Saravana Kannan]

On Wed, Jul 19, 2023 at 4:36 AM Anup Patel <apatel@ventanamicro.com> wrote:
>
> This allows fw_devlink to create device links between consumers of
> a MSI and the supplier of the MSI.
>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/of/property.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>
> diff --git a/drivers/of/property.c b/drivers/of/property.c
> index ddc75cd50825..e4096b79a872 100644
> --- a/drivers/of/property.c
> +++ b/drivers/of/property.c
> @@ -1325,6 +1325,37 @@ static struct device_node *parse_interrupts(struct device_node *np,
>         return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
>  }
>
> +static struct device_node *parse_msi_parent(struct device_node *np,
> +                                           const char *prop_name, int index)
> +{
> +       struct of_phandle_args sup_args;
> +       struct device_node *msi_np;
> +
> +       if (!IS_ENABLED(CONFIG_OF_IRQ))
> +               return NULL;
> +
> +       if (strcmp(prop_name, "msi-parent"))
> +               return NULL;
> +
> +       msi_np = of_parse_phandle(np, prop_name, 0);
> +       if (msi_np) {
> +               if (!of_property_read_bool(msi_np, "#msi-cells")) {
> +                       if (index) {
> +                               of_node_put(msi_np);
> +                               return NULL;
> +                       }
> +                       return msi_np;
> +               }
> +               of_node_put(msi_np);
> +       }
> +
> +       if (of_parse_phandle_with_args(np, prop_name, "#msi-cells", index,
> +                                      &sup_args))
> +               return NULL;
> +
> +       return sup_args.np;
> +}
> +

I'm amazed by the different ways you choose to waste people's time.
Did you even scroll up to see how the other properties are handled?

Why can't this be handled using DEFINE_SIMPLE_PROP macro?

-Saravana

>  static const struct supplier_bindings of_supplier_bindings[] = {
>         { .parse_prop = parse_clocks, },
>         { .parse_prop = parse_interconnects, },
> @@ -1359,6 +1390,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
>         { .parse_prop = parse_regulators, },
>         { .parse_prop = parse_gpio, },
>         { .parse_prop = parse_gpios, },
> +       { .parse_prop = parse_msi_parent, },
>         {}
>  };
>
> --
> 2.34.1
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 02/14] of: property: Add fw_devlink support for msi-parent

[Rob Herring]

On Wed, Jul 19, 2023 at 05:05:30PM +0530, Anup Patel wrote:
> This allows fw_devlink to create device links between consumers of
> a MSI and the supplier of the MSI.
> 
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/of/property.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/of/property.c b/drivers/of/property.c
> index ddc75cd50825..e4096b79a872 100644
> --- a/drivers/of/property.c
> +++ b/drivers/of/property.c
> @@ -1325,6 +1325,37 @@ static struct device_node *parse_interrupts(struct device_node *np,
>  	return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
>  }
>  
> +static struct device_node *parse_msi_parent(struct device_node *np,
> +					    const char *prop_name, int index)
> +{
> +	struct of_phandle_args sup_args;
> +	struct device_node *msi_np;
> +
> +	if (!IS_ENABLED(CONFIG_OF_IRQ))
> +		return NULL;

Why do we need this? Sparc is not going to have MSI properties to begin 
with. I guess it saves a little bit of code. Though Sparc doesn't need 
any of this file. Or maybe there's a better kconfig symbol to use here 
if MSIs are not supported?

> +
> +	if (strcmp(prop_name, "msi-parent"))
> +		return NULL;
> +
> +	msi_np = of_parse_phandle(np, prop_name, 0);
> +	if (msi_np) {
> +		if (!of_property_read_bool(msi_np, "#msi-cells")) {
> +			if (index) {
> +				of_node_put(msi_np);
> +				return NULL;
> +			}
> +			return msi_np;
> +		}
> +		of_node_put(msi_np);
> +	}
> +
> +	if (of_parse_phandle_with_args(np, prop_name, "#msi-cells", index,
> +				       &sup_args))
> +		return NULL;
> +
> +	return sup_args.np;
> +}
> +
>  static const struct supplier_bindings of_supplier_bindings[] = {
>  	{ .parse_prop = parse_clocks, },
>  	{ .parse_prop = parse_interconnects, },
> @@ -1359,6 +1390,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
>  	{ .parse_prop = parse_regulators, },
>  	{ .parse_prop = parse_gpio, },
>  	{ .parse_prop = parse_gpios, },
> +	{ .parse_prop = parse_msi_parent, },
>  	{}
>  };
>  
> -- 
> 2.34.1
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 03/14] drivers: irqchip/riscv-intc: Mark all INTC nodes as initialized

[Anup Patel]

On Thu, Jul 20, 2023 at 3:45 AM Saravana Kannan <saravanak@google.com> wrote:
>
> On Wed, Jul 19, 2023 at 4:36 AM Anup Patel <apatel@ventanamicro.com> wrote:
> >
> > The RISC-V INTC local interrupts are per-HART (or per-CPU) so
> > we create INTC IRQ domain only for the INTC node belonging to
> > the boot HART. This means only the boot HART INTC node will be
> > marked as initialized and other INTC nodes won't be marked which
> > results downstream interrupt controllers (such as IMSIC and APLIC
> > direct-mode) not being probed due to missing device suppliers.
> >
> > To address this issue, we mark all INTC node for which we don't
> > create IRQ domain as initialized.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/irqchip/irq-riscv-intc.c | 10 +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> > index 65f4a2afb381..4e2704bc25fb 100644
> > --- a/drivers/irqchip/irq-riscv-intc.c
> > +++ b/drivers/irqchip/irq-riscv-intc.c
> > @@ -155,8 +155,16 @@ static int __init riscv_intc_init(struct device_node *node,
> >          * for each INTC DT node. We only need to do INTC initialization
> >          * for the INTC DT node belonging to boot CPU (or boot HART).
> >          */
> > -       if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
> > +       if (riscv_hartid_to_cpuid(hartid) != smp_processor_id()) {
> > +               /*
> > +                * The INTC nodes of each CPU are suppliers for downstream
> > +                * interrupt controllers (such as IMSIC and APLIC direct-mode)
> > +                * so we should mark an INTC node as initialized if we are
> > +                * not creating IRQ domain for it.
> > +                */
>
> I'm a bit confused by this. If those non-boot CPUs INTC doesn't have
> an IRQ domain, why are the downstream interrupt controllers listing
> these non-boot CPU INTCs as an upstream interrupt controller?

Downstream interrupt controllers (such as PLIC, APLIC direct-mode,
or IMSIC) use "interrupts-extended" DT property to associate their
MMIO resources with target CPU.

For example: If we have 4 CPUs then PLIC will typically have 2 PLIC
MMIO contexts for each CPU where one context is for M-mode and
another context is for S-mode. In this case, there are total 8 PLIC
MMIO contexts and the arrangement of these MMIO resources is
platform specific so "interrupts-extended" DT property is used by
PLIC driver to discover the arrangement of PLIC MMIO contexts
and their mapping to target CPU.

Similar to the above example, the APLIC direct-mode has per-CPU
IDC MMIO registers and "interrupts-extended" DT property is used
to discover arrangement of these IDC MMIO registers and their
mapping to the target CPU.

>
> This is more of a question of the existing behavior that this patch,
> but this patch highlights the existing oddity.
>
> -Saravana
>
> > +               fwnode_dev_initialized(of_fwnode_handle(node), true);
> >                 return 0;
> > +       }
> >
> >         return riscv_intc_init_common(of_node_to_fwnode(node));
> >  }
> > --
> > 2.34.1
> >

Regards,
Anup

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 02/14] of: property: Add fw_devlink support for msi-parent

[Anup Patel]

On Thu, Jul 20, 2023 at 3:55 AM Saravana Kannan <saravanak@google.com> wrote:
>
> On Wed, Jul 19, 2023 at 4:36 AM Anup Patel <apatel@ventanamicro.com> wrote:
> >
> > This allows fw_devlink to create device links between consumers of
> > a MSI and the supplier of the MSI.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/of/property.c | 32 ++++++++++++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/drivers/of/property.c b/drivers/of/property.c
> > index ddc75cd50825..e4096b79a872 100644
> > --- a/drivers/of/property.c
> > +++ b/drivers/of/property.c
> > @@ -1325,6 +1325,37 @@ static struct device_node *parse_interrupts(struct device_node *np,
> >         return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
> >  }
> >
> > +static struct device_node *parse_msi_parent(struct device_node *np,
> > +                                           const char *prop_name, int index)
> > +{
> > +       struct of_phandle_args sup_args;
> > +       struct device_node *msi_np;
> > +
> > +       if (!IS_ENABLED(CONFIG_OF_IRQ))
> > +               return NULL;
> > +
> > +       if (strcmp(prop_name, "msi-parent"))
> > +               return NULL;
> > +
> > +       msi_np = of_parse_phandle(np, prop_name, 0);
> > +       if (msi_np) {
> > +               if (!of_property_read_bool(msi_np, "#msi-cells")) {
> > +                       if (index) {
> > +                               of_node_put(msi_np);
> > +                               return NULL;
> > +                       }
> > +                       return msi_np;
> > +               }
> > +               of_node_put(msi_np);
> > +       }
> > +
> > +       if (of_parse_phandle_with_args(np, prop_name, "#msi-cells", index,
> > +                                      &sup_args))
> > +               return NULL;
> > +
> > +       return sup_args.np;
> > +}
> > +
>
> I'm amazed by the different ways you choose to waste people's time.
> Did you even scroll up to see how the other properties are handled?
>
> Why can't this be handled using DEFINE_SIMPLE_PROP macro?

DEFINE_SIMPLE_PROP() is not suitable for msi-parent because we
have a special case where for a single MSI parent the "#msi-cells"
property won't be present in the supplier DT node.

The of_msi_get_domain() function also handles this special case
separately.

Regards,
Anup


>
> -Saravana
>
> >  static const struct supplier_bindings of_supplier_bindings[] = {
> >         { .parse_prop = parse_clocks, },
> >         { .parse_prop = parse_interconnects, },
> > @@ -1359,6 +1390,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
> >         { .parse_prop = parse_regulators, },
> >         { .parse_prop = parse_gpio, },
> >         { .parse_prop = parse_gpios, },
> > +       { .parse_prop = parse_msi_parent, },
> >         {}
> >  };
> >
> > --
> > 2.34.1
> >

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 02/14] of: property: Add fw_devlink support for msi-parent

[Anup Patel]

On Thu, Jul 20, 2023 at 4:08 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jul 19, 2023 at 05:05:30PM +0530, Anup Patel wrote:
> > This allows fw_devlink to create device links between consumers of
> > a MSI and the supplier of the MSI.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/of/property.c | 32 ++++++++++++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/drivers/of/property.c b/drivers/of/property.c
> > index ddc75cd50825..e4096b79a872 100644
> > --- a/drivers/of/property.c
> > +++ b/drivers/of/property.c
> > @@ -1325,6 +1325,37 @@ static struct device_node *parse_interrupts(struct device_node *np,
> >       return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
> >  }
> >
> > +static struct device_node *parse_msi_parent(struct device_node *np,
> > +                                         const char *prop_name, int index)
> > +{
> > +     struct of_phandle_args sup_args;
> > +     struct device_node *msi_np;
> > +
> > +     if (!IS_ENABLED(CONFIG_OF_IRQ))
> > +             return NULL;
>
> Why do we need this? Sparc is not going to have MSI properties to begin
> with. I guess it saves a little bit of code. Though Sparc doesn't need
> any of this file. Or maybe there's a better kconfig symbol to use here
> if MSIs are not supported?

I can't think of a better kconfig symbol over here but since Sparc does
not have MSI properties, I think following is better:

if (IS_ENABLED(CONFIG_SPARC))
    return NULL;

Any other suggestions ?

Regards,
Anup

>
> > +
> > +     if (strcmp(prop_name, "msi-parent"))
> > +             return NULL;
> > +
> > +     msi_np = of_parse_phandle(np, prop_name, 0);
> > +     if (msi_np) {
> > +             if (!of_property_read_bool(msi_np, "#msi-cells")) {
> > +                     if (index) {
> > +                             of_node_put(msi_np);
> > +                             return NULL;
> > +                     }
> > +                     return msi_np;
> > +             }
> > +             of_node_put(msi_np);
> > +     }
> > +
> > +     if (of_parse_phandle_with_args(np, prop_name, "#msi-cells", index,
> > +                                    &sup_args))
> > +             return NULL;
> > +
> > +     return sup_args.np;
> > +}
> > +
> >  static const struct supplier_bindings of_supplier_bindings[] = {
> >       { .parse_prop = parse_clocks, },
> >       { .parse_prop = parse_interconnects, },
> > @@ -1359,6 +1390,7 @@ static const struct supplier_bindings of_supplier_bindings[] = {
> >       { .parse_prop = parse_regulators, },
> >       { .parse_prop = parse_gpio, },
> >       { .parse_prop = parse_gpios, },
> > +     { .parse_prop = parse_msi_parent, },
> >       {}
> >  };
> >
> > --
> > 2.34.1
> >

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 04/14] irqchip/sifive-plic: Use platform driver probing for PLIC

[Sunil V L]

Hi Anup,

On Wed, Jul 19, 2023 at 05:05:32PM +0530, Anup Patel wrote:
> The PLIC driver does not require very early initialization so let us
> replace use of IRQCHIP_DECLARE() with IRQCHIP_PLATFORM_DRIVER_xyz()
> so that PLIC is probed through platform driver probing.
> 
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/irqchip/irq-sifive-plic.c | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
> index 56b0544b1f27..dc02f0761ced 100644
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -569,8 +569,10 @@ static int __init plic_init(struct device_node *node,
>  	return __plic_init(node, parent, 0);
>  }
>  
> -IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
> -IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
> +IRQCHIP_PLATFORM_DRIVER_BEGIN(sifive_plic)
> +IRQCHIP_MATCH("sifive,plic-1.0.0", plic_init)
> +IRQCHIP_MATCH("riscv,plic0", plic_init) /* for legacy systems */
> +IRQCHIP_PLATFORM_DRIVER_END(sifive_plic)
>  
Few observations..

1) IRQCHIP_PLATFORM_DRIVER_xyz work only for DT. Can we have more generic
platform driver probe similar to APLIC driver?

2) With platform driver model, there is a crash some times.

[    0.198665] CPU: 4 PID: 32 Comm: cpuhp/4 Not tainted
6.5.0-rc3-00038-g782440711cdb #42
[    0.198944] Hardware name: riscv-virtio,qemu (DT)
[    0.199125] epc : plic_starting_cpu+0x60/0xa6
[    0.199545]  ra : plic_starting_cpu+0x58/0xa6
[    0.199676] epc : ffffffff8047396e ra : ffffffff80473966 sp :
ff20000000173d80
[    0.199899]  gp : ffffffff81501740 tp : ff600000019bde00 t0 :
ffffffff81200800
[    0.200112]  t1 : 0000000000000000 t2 : 0000000000001000 s0 :
ff20000000173db0
[    0.200324]  s1 : ff6000007ef91eb0 a0 : ff600000019690b0 a1 :
0000000200000020
[    0.200502]  a2 : 0000000000000000 a3 : 0000000000000000 a4 :
0000000000000000
[    0.200678]  a5 : 0000000000000000 a6 : ff6000000184a108 a7 :
ff6000000184a100
[    0.200855]  s2 : 000000000000000b s3 : ffffffff8153a550 s4 :
0000000000000004
[    0.201032]  s5 : 0000000000000001 s6 : 0000000000000002 s7 :
ffffffff8047390e
[    0.201210]  s8 : ffffffff80033f8a s9 : ffffffff80033f64 s10:
0000000000000000
[    0.201392]  s11: 0000000000000000 t3 : 0000000000000000 t4 :
ffffffff81486c20
[    0.201567]  t5 : 0000000000000002 t6 : 0000000000000002
[    0.201702] status: 0000000200000100 badaddr: 0000000000000000 cause:
000000000000000f
[    0.201962] [<ffffffff8047396e>] plic_starting_cpu+0x60/0xa6
[    0.202184] [<ffffffff8001069e>] cpuhp_invoke_callback+0xb4/0x164
[    0.202346] [<ffffffff80010972>] cpuhp_thread_fun+0x8a/0x11c
[    0.202493] [<ffffffff80033f62>] smpboot_thread_fn+0xe4/0x1be
[    0.202639] [<ffffffff8003042a>] kthread+0xc4/0xe0
[    0.202759] [<ffffffff8000355e>] ret_from_fork+0xa/0x1c
[    0.203038] Code: 89bd 854a 3097 ffbf 80e7 51e0 000f 0140 4781 6498
(c31c) 2703

3) Looks like an existing issue but I get below warning also.

[    0.207677] list_add double add: new=ffffffff814a0798,
prev=ffffffff814a0798, next=ffffffff814be638.
[    0.208243] WARNING: CPU: 4 PID: 1 at lib/list_debug.c:33
__list_add_valid+0x46/0xac
[    0.208677] Modules linked in:
[    0.208780] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
6.5.0-rc3-00038-g782440711cdb #28
[    0.208862] Hardware name: riscv-virtio,qemu (DT)
[    0.208926] epc : __list_add_valid+0x46/0xac
[    0.208961]  ra : __list_add_valid+0x46/0xac
[    0.208983] epc : ffffffff803cb356 ra : ffffffff803cb356 sp :
ff200000000439f0
[    0.208994]  gp : ffffffff81501740 tp : ff600000018f0000 t0 :
2000000000000000
[    0.209005]  t1 : 000000000000006c t2 : 206464615f747369 s0 :
ff20000000043a00
[    0.209015]  s1 : ffffffff814a0798 a0 : 0000000000000058 a1 :
ffffffff81486828
[    0.209025]  a2 : 0000000000000000 a3 : fffffffffffffffe a4 :
0000000000000000
[    0.209034]  a5 : 0000000000000000 a6 : 0000000000000068 a7 :
0000000000000038
[    0.209044]  s2 : ffffffff814be5f8 s3 : ffffffff814a0798 s4 :
ffffffff814be638
[    0.209053]  s5 : ff6000007fff75c0 s6 : 0000000000000060 s7 :
ffffffff80c20eb0
[    0.209063]  s8 : 0000000000000008 s9 : 0000000000000004 s10:
ffffffff80c20eb0
[    0.209072]  s11: ffffffff81038e80 t3 : ffffffff815159d7 t4 :
ffffffff815159d7
[    0.209081]  t5 : ffffffff815159d8 t6 : ff200000000437f8
[    0.209090] status: 0000000200000120 badaddr: 0000000000000000 cause:
0000000000000003
[    0.209167] [<ffffffff803cb356>] __list_add_valid+0x46/0xac
[    0.209219] [<ffffffff805812d4>] register_syscore_ops+0x3e/0x70
[    0.209245] [<ffffffff80a1fd0c>] __plic_init.isra.0+0x3e0/0x4e2
[    0.209267] [<ffffffff80a1fe3a>] plic_init+0x12/0x1a
[    0.209281] [<ffffffff80470c10>] platform_irqchip_probe+0x82/0xb4
[    0.209292] [<ffffffff80582aa8>] platform_probe+0x4e/0xa6
[    0.209301] [<ffffffff805805a4>] really_probe+0x86/0x242
[    0.209308] [<ffffffff805807bc>] __driver_probe_device+0x5c/0xda
[    0.209316] [<ffffffff80580866>] driver_probe_device+0x2c/0xb2
[    0.209324] [<ffffffff805809e6>] __driver_attach+0x6c/0x11a
[    0.209331] [<ffffffff8057e73a>] bus_for_each_dev+0x60/0xae
[    0.209343] [<ffffffff8057fff6>] driver_attach+0x1a/0x22
[    0.209352] [<ffffffff8057f956>] bus_add_driver+0xd0/0x1ba
[    0.209362] [<ffffffff80581634>] driver_register+0x3e/0xd8
[    0.209370] [<ffffffff805827c0>] __platform_driver_register+0x1c/0x24
[    0.209378] [<ffffffff80a1f902>] sifive_plic_driver_init+0x1a/0x22
[    0.209389] [<ffffffff8000212c>] do_one_initcall+0x58/0x19c
[    0.209399] [<ffffffff80a01056>] kernel_init_freeable+0x20c/0x276
[    0.209410] [<ffffffff808d6686>] kernel_init+0x1e/0x10a
[    0.209421] [<ffffffff8000355e>] ret_from_fork+0xa/0x1c
[    0.209477] ---[ end trace 0000000000000000 ]---

Thanks,
Sunil

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

Re: [PATCH v6 04/14] irqchip/sifive-plic: Use platform driver probing for PLIC

[Anup Patel]

Hi Sunil,

On Thu, Jul 27, 2023 at 2:11 PM Sunil V L <sunilvl@ventanamicro.com> wrote:
>
> Hi Anup,
>
> On Wed, Jul 19, 2023 at 05:05:32PM +0530, Anup Patel wrote:
> > The PLIC driver does not require very early initialization so let us
> > replace use of IRQCHIP_DECLARE() with IRQCHIP_PLATFORM_DRIVER_xyz()
> > so that PLIC is probed through platform driver probing.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/irqchip/irq-sifive-plic.c | 12 ++++++++----
> >  1 file changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
> > index 56b0544b1f27..dc02f0761ced 100644
> > --- a/drivers/irqchip/irq-sifive-plic.c
> > +++ b/drivers/irqchip/irq-sifive-plic.c
> > @@ -569,8 +569,10 @@ static int __init plic_init(struct device_node *node,
> >       return __plic_init(node, parent, 0);
> >  }
> >
> > -IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
> > -IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
> > +IRQCHIP_PLATFORM_DRIVER_BEGIN(sifive_plic)
> > +IRQCHIP_MATCH("sifive,plic-1.0.0", plic_init)
> > +IRQCHIP_MATCH("riscv,plic0", plic_init) /* for legacy systems */
> > +IRQCHIP_PLATFORM_DRIVER_END(sifive_plic)
> >
> Few observations..
>
> 1) IRQCHIP_PLATFORM_DRIVER_xyz work only for DT. Can we have more generic
> platform driver probe similar to APLIC driver?

Okay, I will convert it into generic platform driver which
will work for ACPI as well.

>
> 2) With platform driver model, there is a crash some times.
>
> [    0.198665] CPU: 4 PID: 32 Comm: cpuhp/4 Not tainted
> 6.5.0-rc3-00038-g782440711cdb #42
> [    0.198944] Hardware name: riscv-virtio,qemu (DT)
> [    0.199125] epc : plic_starting_cpu+0x60/0xa6
> [    0.199545]  ra : plic_starting_cpu+0x58/0xa6
> [    0.199676] epc : ffffffff8047396e ra : ffffffff80473966 sp :
> ff20000000173d80
> [    0.199899]  gp : ffffffff81501740 tp : ff600000019bde00 t0 :
> ffffffff81200800
> [    0.200112]  t1 : 0000000000000000 t2 : 0000000000001000 s0 :
> ff20000000173db0
> [    0.200324]  s1 : ff6000007ef91eb0 a0 : ff600000019690b0 a1 :
> 0000000200000020
> [    0.200502]  a2 : 0000000000000000 a3 : 0000000000000000 a4 :
> 0000000000000000
> [    0.200678]  a5 : 0000000000000000 a6 : ff6000000184a108 a7 :
> ff6000000184a100
> [    0.200855]  s2 : 000000000000000b s3 : ffffffff8153a550 s4 :
> 0000000000000004
> [    0.201032]  s5 : 0000000000000001 s6 : 0000000000000002 s7 :
> ffffffff8047390e
> [    0.201210]  s8 : ffffffff80033f8a s9 : ffffffff80033f64 s10:
> 0000000000000000
> [    0.201392]  s11: 0000000000000000 t3 : 0000000000000000 t4 :
> ffffffff81486c20
> [    0.201567]  t5 : 0000000000000002 t6 : 0000000000000002
> [    0.201702] status: 0000000200000100 badaddr: 0000000000000000 cause:
> 000000000000000f
> [    0.201962] [<ffffffff8047396e>] plic_starting_cpu+0x60/0xa6
> [    0.202184] [<ffffffff8001069e>] cpuhp_invoke_callback+0xb4/0x164
> [    0.202346] [<ffffffff80010972>] cpuhp_thread_fun+0x8a/0x11c
> [    0.202493] [<ffffffff80033f62>] smpboot_thread_fn+0xe4/0x1be
> [    0.202639] [<ffffffff8003042a>] kthread+0xc4/0xe0
> [    0.202759] [<ffffffff8000355e>] ret_from_fork+0xa/0x1c
> [    0.203038] Code: 89bd 854a 3097 ffbf 80e7 51e0 000f 0140 4781 6498
> (c31c) 2703

The cpuhp setup needed to change since as platform driver the
PLIC is probed after all CPUs are brought-up. I will fix this in
the next revision.

>
> 3) Looks like an existing issue but I get below warning also.
>
> [    0.207677] list_add double add: new=ffffffff814a0798,
> prev=ffffffff814a0798, next=ffffffff814be638.
> [    0.208243] WARNING: CPU: 4 PID: 1 at lib/list_debug.c:33
> __list_add_valid+0x46/0xac
> [    0.208677] Modules linked in:
> [    0.208780] CPU: 4 PID: 1 Comm: swapper/0 Not tainted
> 6.5.0-rc3-00038-g782440711cdb #28
> [    0.208862] Hardware name: riscv-virtio,qemu (DT)
> [    0.208926] epc : __list_add_valid+0x46/0xac
> [    0.208961]  ra : __list_add_valid+0x46/0xac
> [    0.208983] epc : ffffffff803cb356 ra : ffffffff803cb356 sp :
> ff200000000439f0
> [    0.208994]  gp : ffffffff81501740 tp : ff600000018f0000 t0 :
> 2000000000000000
> [    0.209005]  t1 : 000000000000006c t2 : 206464615f747369 s0 :
> ff20000000043a00
> [    0.209015]  s1 : ffffffff814a0798 a0 : 0000000000000058 a1 :
> ffffffff81486828
> [    0.209025]  a2 : 0000000000000000 a3 : fffffffffffffffe a4 :
> 0000000000000000
> [    0.209034]  a5 : 0000000000000000 a6 : 0000000000000068 a7 :
> 0000000000000038
> [    0.209044]  s2 : ffffffff814be5f8 s3 : ffffffff814a0798 s4 :
> ffffffff814be638
> [    0.209053]  s5 : ff6000007fff75c0 s6 : 0000000000000060 s7 :
> ffffffff80c20eb0
> [    0.209063]  s8 : 0000000000000008 s9 : 0000000000000004 s10:
> ffffffff80c20eb0
> [    0.209072]  s11: ffffffff81038e80 t3 : ffffffff815159d7 t4 :
> ffffffff815159d7
> [    0.209081]  t5 : ffffffff815159d8 t6 : ff200000000437f8
> [    0.209090] status: 0000000200000120 badaddr: 0000000000000000 cause:
> 0000000000000003
> [    0.209167] [<ffffffff803cb356>] __list_add_valid+0x46/0xac
> [    0.209219] [<ffffffff805812d4>] register_syscore_ops+0x3e/0x70
> [    0.209245] [<ffffffff80a1fd0c>] __plic_init.isra.0+0x3e0/0x4e2
> [    0.209267] [<ffffffff80a1fe3a>] plic_init+0x12/0x1a
> [    0.209281] [<ffffffff80470c10>] platform_irqchip_probe+0x82/0xb4
> [    0.209292] [<ffffffff80582aa8>] platform_probe+0x4e/0xa6
> [    0.209301] [<ffffffff805805a4>] really_probe+0x86/0x242
> [    0.209308] [<ffffffff805807bc>] __driver_probe_device+0x5c/0xda
> [    0.209316] [<ffffffff80580866>] driver_probe_device+0x2c/0xb2
> [    0.209324] [<ffffffff805809e6>] __driver_attach+0x6c/0x11a
> [    0.209331] [<ffffffff8057e73a>] bus_for_each_dev+0x60/0xae
> [    0.209343] [<ffffffff8057fff6>] driver_attach+0x1a/0x22
> [    0.209352] [<ffffffff8057f956>] bus_add_driver+0xd0/0x1ba
> [    0.209362] [<ffffffff80581634>] driver_register+0x3e/0xd8
> [    0.209370] [<ffffffff805827c0>] __platform_driver_register+0x1c/0x24
> [    0.209378] [<ffffffff80a1f902>] sifive_plic_driver_init+0x1a/0x22
> [    0.209389] [<ffffffff8000212c>] do_one_initcall+0x58/0x19c
> [    0.209399] [<ffffffff80a01056>] kernel_init_freeable+0x20c/0x276
> [    0.209410] [<ffffffff808d6686>] kernel_init+0x1e/0x10a
> [    0.209421] [<ffffffff8000355e>] ret_from_fork+0xa/0x1c
> [    0.209477] ---[ end trace 0000000000000000 ]---

This is a bug in current PLIC driver where it unconditionally
registers syscore ops which breaks on multi-socket systems
having multiple PLICs. I will add a separate patch in the
next revision to fix this issue.

Regards,
Anup

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv