linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>
Cc: Inochi Amaoto <inochiama@outlook.com>,
	Chao Wei <chao.wei@sophgo.com>,
	Chen Wang <unicorn_wang@outlook.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-riscv@lists.infradead.org
Subject: Re: [PATCH v2 4/7] riscv: dts: sophgo: Separate common devices from cv1800b soc
Date: Sat, 14 Oct 2023 17:04:26 +0800	[thread overview]
Message-ID: <ZSpZmsb29ZC5L9dS@xhacker> (raw)
In-Reply-To: <20231013-catchable-wince-f24060feb639@spud>

On Fri, Oct 13, 2023 at 10:08:24AM +0100, Conor Dooley wrote:
> Yo,
> 
> On Mon, Oct 09, 2023 at 07:26:35PM +0800, Inochi Amaoto wrote:
> > Move the cpu and the common peripherals of CV181x and CV180x to new file.
> > 
...

> >  	};
> >  };
> 
> What I wanted to comment on was this though - it seems that both the
> cv1800b and the cv1812h have identical plic and clint nodes, other than
> their compatibles? If that is the case, why create a cv1800b and a
> cv1812h specific file containing entirely new nodes, when overriding the
> compatible would be sufficient? Doubly so if the other SoCs in the
> cv18xx series are going to have identical layouts.
> 
> I gave it a quick test locally with the below diff applied on top of
> this series - although I didn't make sure that I didn't re-order the
> plic & clint nodes, I just wanted to demonstrate what I had done.
> 
> Cheers,
> Conor.
> 
> -- 8< --
> 
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> index 3af9e34b3bc7..a9d809a49e7a 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> @@ -5,7 +5,7 @@
>  
>  /dts-v1/;
>  
> -#include "cv1800b.dtsi"
> +#include "cv180x.dtsi"
>  
>  / {
>  	model = "Milk-V Duo";
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index 0904154f9829..e69de29bb2d1 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -1,30 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> -/*
> - * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
> - */
> -
> -#include "cv180x.dtsi"
> -
> -/ {
> -	compatible = "sophgo,cv1800b";
> -
> -	soc {
> -		interrupt-parent = <&plic>;
> -
> -		plic: interrupt-controller@70000000 {
> -			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
> -			reg = <0x70000000 0x4000000>;
> -			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> -			interrupt-controller;
> -			#address-cells = <0>;
> -			#interrupt-cells = <2>;
> -			riscv,ndev = <101>;
> -		};
> -
> -		clint: timer@74000000 {
> -			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
> -			reg = <0x74000000 0x10000>;
> -			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> -		};
> -	};
> -};
> diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> index 64ffb23d3626..1a2c44ba4de9 100644
> --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> @@ -48,6 +48,7 @@ osc: oscillator {
>  
>  	soc {
>  		compatible = "simple-bus";
> +		interrupt-parent = <&plic>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		dma-noncoherent;
> @@ -174,5 +175,21 @@ uart4: serial@41c0000 {
>  			reg-io-width = <4>;
>  			status = "disabled";
>  		};
> +
> +		plic: interrupt-controller@70000000 {
> +			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
> +			reg = <0x70000000 0x4000000>;
> +			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <2>;
> +			riscv,ndev = <101>;
> +		};
> +
> +		clint: timer@74000000 {
> +			compatible = "sophgo,cv1800b-clint", "thead,c900-clint";
> +			reg = <0x74000000 0x10000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> +		};
>  	};
>  };
> diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
> index 3864d34b0100..c0a8d3290cc8 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi
> @@ -15,22 +15,13 @@ memory@80000000 {
>  	};
>  
>  	soc {
> -		interrupt-parent = <&plic>;
>  
>  		plic: interrupt-controller@70000000 {
>  			compatible = "sophgo,cv1812h-plic", "thead,c900-plic";

Hi Conor,

Maybe this has been discussed before but I didn't find it. I'm wondering
the reason of adding each plic and clint binding for each SoC, can we
just use the thead,c900-plic for plic?
FWICT, arm gic dt usage follows this way, there's no binding for each SoC's
gic but directly use "arm,gic-v3" and so on.


Thanks in advance

> -			reg = <0x70000000 0x4000000>;
> -			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> -			interrupt-controller;
> -			#address-cells = <0>;
> -			#interrupt-cells = <2>;
> -			riscv,ndev = <101>;
>  		};
>  
>  		clint: timer@74000000 {
>  			compatible = "sophgo,cv1812h-clint", "thead,c900-clint";
> -			reg = <0x74000000 0x10000>;
> -			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2023-10-14  9:16 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-09 11:25 [PATCH v2 0/7] Add Huashan Pi board support Inochi Amaoto
2023-10-09 11:26 ` [PATCH v2 1/7] dt-bindings: interrupt-controller: Add SOPHGO CV1812H plic Inochi Amaoto
2023-10-09 11:30   ` Krzysztof Kozlowski
     [not found] ` <20231009112642.477337-1-inochiama@outlook.com>
2023-10-09 11:26   ` [PATCH v2 2/7] dt-bindings: timer: Add SOPHGO CV1812H clint Inochi Amaoto
2023-10-09 11:30     ` Krzysztof Kozlowski
2023-10-09 11:26   ` [PATCH v2 3/7] dt-bindings: riscv: Add SOPHGO Huashan Pi board compatibles Inochi Amaoto
2023-10-09 11:30     ` Krzysztof Kozlowski
2023-10-09 11:26   ` [PATCH v2 4/7] riscv: dts: sophgo: Separate common devices from cv1800b soc Inochi Amaoto
2023-10-12 10:46     ` Chen Wang
2023-10-12 12:50     ` Chen Wang
2023-10-13  9:08     ` Conor Dooley
2023-10-13  9:50       ` [PATCH v2 6/7] riscv: dts: sophgo: add initial CV1812H SoC device tree Inochi Amaoto
2023-10-13  9:52       ` [PATCH v2 6/7] riscv: dts: sophgo: Separate common devices from cv1800b soc Inochi Amaoto
2023-10-13 13:27         ` Conor Dooley
2023-10-13 22:36           ` [PATCH v2 4/7] " Inochi Amaoto
2023-10-14  9:04       ` Jisheng Zhang [this message]
2023-10-14  9:28         ` Conor Dooley
2023-10-09 11:26   ` [PATCH v2 5/7] riscv: dts: sophgo: cv180x: Add gpio devices Inochi Amaoto
2023-10-12 12:52     ` Chen Wang
2023-10-09 11:26   ` [PATCH v2 6/7] riscv: dts: sophgo: add initial CV1812H SoC device tree Inochi Amaoto
2023-10-10  7:21     ` Chen Wang
2023-10-10  7:53       ` Inochi Amaoto
2023-10-12  9:41         ` Conor Dooley
2023-10-12 13:02           ` Chen Wang
2023-10-09 11:26   ` [PATCH v2 7/7] riscv: dts: sophgo: add Huashan Pi board " Inochi Amaoto
2023-10-12 12:53     ` Chen Wang
2023-10-12 13:20 ` [PATCH v2 0/7] Add Huashan Pi board support Jisheng Zhang
2023-10-13  8:48 ` Krzysztof Kozlowski
2023-10-13  8:55   ` Inochi Amaoto
2023-10-13  9:00   ` Inochi Amaoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZSpZmsb29ZC5L9dS@xhacker \
    --to=jszhang@kernel.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=chao.wei@sophgo.com \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=inochiama@outlook.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=unicorn_wang@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).