From: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"linus.walleij@linaro.org" <linus.walleij@linaro.org>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"andrew@lunn.ch" <andrew@lunn.ch>,
"gregory.clement@bootlin.com" <gregory.clement@bootlin.com>,
"sebastian.hesselbarth@gmail.com"
<sebastian.hesselbarth@gmail.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 1/8] dt-bindings: pinctrl: mvebu: Document bindings for AC5
Date: Tue, 15 Mar 2022 21:12:45 +0000 [thread overview]
Message-ID: <7e73bba0-8b54-772c-2e94-8fca4e4e3294@alliedtelesis.co.nz> (raw)
In-Reply-To: <4e6df448-5562-8f50-6f46-91acb279bc1a@canonical.com>
(trimmed cc list to the arm, pinctrl and dt people)
On 15/03/22 23:46, Krzysztof Kozlowski wrote:
> On 14/03/2022 22:31, Chris Packham wrote:
>> Add JSON schema for marvell,ac5-pinctrl present on the Marvell 98DX2530
>> SoC.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>> ---
>>
>> Notes:
>> Changes in v2:
>> - Remove syscon and simple-mfd compatibles
>>
>> .../bindings/pinctrl/marvell,ac5-pinctrl.yaml | 70 +++++++++++++++++++
>> 1 file changed, 70 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..65af1d5f5fe0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
>> @@ -0,0 +1,70 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://scanmail.trustwave.com/?c=20988&d=vu6w4lGvpbdx5x7Y5wSGMQ_aPa00Bnj19ce8eGP0QA&u=http%3a%2f%2fdevicetree%2eorg%2fschemas%2fpinctrl%2fmarvell%2cac5-pinctrl%2eyaml%23
>> +$schema: http://scanmail.trustwave.com/?c=20988&d=vu6w4lGvpbdx5x7Y5wSGMQ_aPa00Bnj19cPrfjTyTg&u=http%3a%2f%2fdevicetree%2eorg%2fmeta-schemas%2fcore%2eyaml%23
>> +
>> +title: Marvell AC5 pin controller
>> +
>> +maintainers:
>> + - Chris Packham <chris.packham@alliedtelesis.co.nz>
>> +
>> +description:
>> + Bindings for Marvell's AC5 memory-mapped pin controller.
>> +
>> +properties:
>> + compatible:
>> + const: marvell,ac5-pinctrl
>> +
>> +patternProperties:
>> + '-pins$':
>> + type: object
>> + $ref: pinmux-node.yaml#
>> +
>> + properties:
>> + marvell,function:
>> + $ref: "/schemas/types.yaml#/definitions/string"
>> + description:
>> + Indicates the function to select.
>> + enum: [ gpio, i2c0, i2c1, nand, sdio, spi0, spi1, uart0, uart1, uart2, uart3 ]
>> +
>> + marvell,pins:
>> + $ref: /schemas/types.yaml#/definitions/string-array
>> + description:
>> + Array of MPP pins to be used for the given function.
>> + minItems: 1
>> + items:
>> + enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9,
>> + mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19,
>> + mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29,
>> + mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39,
>> + mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
>> +
>> +allOf:
>> + - $ref: "pinctrl.yaml#"
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + system-controller@80020100 {
>> + compatible = "syscon", "simple-mfd";
>> + reg = <0x80020000 0x20>;
> This is unusual. Usually the pinctrl should be a device @80020100, not
> child of syscon node. Why do you need it? In v1 you mentioned that
> vendor sources do like this, but it's not correct to copy wrong DTS. :)
The vendor dts has this
pinctrl0: pinctrl@80020100 {
compatible = "marvell,ac5-pinctrl",
"syscon", "simple-mfd";
reg = <0 0x80020100 0 0x20>;
i2c_mpps: i2c-mpps {
marvell,pins = "mpp26", "mpp27";
marvell,function = "i2c0-opt";
};
};
Rob pointed out that "syscon", "simple-mfd" don't belong. I went looking
and found marvell,armada-7k-pinctrl which has the pinctrl as a child of
a syscon node and what you see in v2 is the result.
I probably went a bit too far off the deep end and should have just
dropped the "syscon", "simple-mfd" compatibles. I even wrote that
version but decided to add some gold plating before I submitted it.
>
>
> Best regards,
> Krzysztof
next prev parent reply other threads:[~2022-03-15 21:12 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-14 21:31 [PATCH v2 0/8] arm64: mvebu: Support for Marvell 98DX2530 (and variants) Chris Packham
2022-03-14 21:31 ` [PATCH v2 1/8] dt-bindings: pinctrl: mvebu: Document bindings for AC5 Chris Packham
2022-03-15 0:07 ` Andrew Lunn
2022-03-15 0:22 ` Chris Packham
2022-03-15 0:27 ` Andrew Lunn
2022-03-23 18:34 ` Rob Herring
2022-03-15 10:46 ` Krzysztof Kozlowski
2022-03-15 21:12 ` Chris Packham [this message]
2022-03-16 8:16 ` Krzysztof Kozlowski
2022-03-16 20:21 ` Chris Packham
2022-03-17 7:26 ` Krzysztof Kozlowski
2022-03-17 14:14 ` Andrew Lunn
2022-03-17 15:16 ` Krzysztof Kozlowski
2022-03-14 21:31 ` [PATCH v2 2/8] dt-bindings: net: mvneta: Add marvell,armada-ac5-neta Chris Packham
2022-03-15 0:10 ` Andrew Lunn
2022-03-14 21:31 ` [PATCH v2 3/8] dt-bindings: mmc: xenon: add AC5 compatible string Chris Packham
2022-03-15 0:14 ` Andrew Lunn
2022-03-14 21:31 ` [PATCH v2 4/8] pinctrl: mvebu: pinctrl driver for 98DX2530 SoC Chris Packham
2022-03-15 0:16 ` Andrew Lunn
2022-03-15 10:49 ` Krzysztof Kozlowski
2022-03-15 14:33 ` Andrew Lunn
2022-03-15 14:39 ` Krzysztof Kozlowski
2022-03-14 21:31 ` [PATCH v2 5/8] net: mvneta: Add support for 98DX2530 Ethernet port Chris Packham
2022-03-15 0:12 ` Andrew Lunn
2022-03-15 0:27 ` Chris Packham
2022-03-14 21:31 ` [PATCH v2 6/8] mmc: xenon: add AC5 compatible string Chris Packham
2022-03-15 0:14 ` Andrew Lunn
2022-03-14 21:31 ` [PATCH v2 7/8] arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board Chris Packham
2022-03-15 0:24 ` Andrew Lunn
2022-03-15 2:11 ` Chris Packham
2022-03-15 14:28 ` Andrew Lunn
2022-03-16 11:49 ` Marc Zyngier
2022-03-14 21:31 ` [PATCH v2 8/8] arm64: marvell: enable the 98DX2530 pinctrl driver Chris Packham
2022-03-15 0:25 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7e73bba0-8b54-772c-2e94-8fca4e4e3294@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=andrew@lunn.ch \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).