All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vaibhav Hiremath <hvaibhav@ti.com>
To: <netdev@vger.kernel.org>
Cc: <paul@pwsan.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, Mugunthan V N <mugunthanvnm@ti.com>,
	Vaibhav Hiremath <hvaibhav@ti.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Benoit Cousson <b-cousson@ti.com>
Subject: [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Date: Mon, 29 Oct 2012 13:51:21 +0530	[thread overview]
Message-ID: <1351498881-32482-6-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1351498881-32482-1-git-send-email-hvaibhav@ti.com>

From: Mugunthan V N <mugunthanvnm@ti.com>

Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    8 ++++++
 arch/arm/boot/dts/am335x-evm.dts  |    8 ++++++
 arch/arm/boot/dts/am33xx.dtsi     |   50 +++++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..f6bea04 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,55 @@
 			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		mac: ethernet@4A100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			host_port_no = <0>;
+			cpdma_reg_ofs = <0x800>;
+			cpdma_sram_ofs = <0xa00>;
+			ale_reg_ofs = <0xd00>;
+			ale_entries = <1024>;
+			host_port_reg_ofs = <0x108>;
+			hw_stats_reg_ofs = <0x900>;
+			bd_ram_ofs = <0x2000>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			reg = <0x4a100000 0x800
+				0x4a101200 0x100
+				0x4a101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+			interrupts = <40 41 42 43>;
+			ranges;
+			cpsw_emac0: slave@0 {
+				slave_reg_ofs = <0x208>;
+				sliver_reg_ofs = <0xd80>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+			cpsw_emac1: slave@1 {
+				slave_reg_ofs = <0x308>;
+				sliver_reg_ofs = <0xdc0>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+
+		};
 	};
 };
--
1.7.0.4

WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Hiremath <hvaibhav@ti.com>
To: netdev@vger.kernel.org
Cc: paul@pwsan.com, linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org, Mugunthan V N <mugunthanvnm@ti.com>,
	Vaibhav Hiremath <hvaibhav@ti.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Benoit Cousson <b-cousson@ti.com>
Subject: [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Date: Mon, 29 Oct 2012 13:51:21 +0530	[thread overview]
Message-ID: <1351498881-32482-6-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1351498881-32482-1-git-send-email-hvaibhav@ti.com>

From: Mugunthan V N <mugunthanvnm@ti.com>

Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    8 ++++++
 arch/arm/boot/dts/am335x-evm.dts  |    8 ++++++
 arch/arm/boot/dts/am33xx.dtsi     |   50 +++++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..f6bea04 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,55 @@
 			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		mac: ethernet@4A100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			host_port_no = <0>;
+			cpdma_reg_ofs = <0x800>;
+			cpdma_sram_ofs = <0xa00>;
+			ale_reg_ofs = <0xd00>;
+			ale_entries = <1024>;
+			host_port_reg_ofs = <0x108>;
+			hw_stats_reg_ofs = <0x900>;
+			bd_ram_ofs = <0x2000>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			reg = <0x4a100000 0x800
+				0x4a101200 0x100
+				0x4a101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+			interrupts = <40 41 42 43>;
+			ranges;
+			cpsw_emac0: slave@0 {
+				slave_reg_ofs = <0x208>;
+				sliver_reg_ofs = <0xd80>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+			cpsw_emac1: slave@1 {
+				slave_reg_ofs = <0x308>;
+				sliver_reg_ofs = <0xdc0>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+
+		};
 	};
 };
--
1.7.0.4

WARNING: multiple messages have this Message-ID (diff)
From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Date: Mon, 29 Oct 2012 13:51:21 +0530	[thread overview]
Message-ID: <1351498881-32482-6-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1351498881-32482-1-git-send-email-hvaibhav@ti.com>

From: Mugunthan V N <mugunthanvnm@ti.com>

Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    8 ++++++
 arch/arm/boot/dts/am335x-evm.dts  |    8 ++++++
 arch/arm/boot/dts/am33xx.dtsi     |   50 +++++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..f6bea04 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,55 @@
 			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		mac: ethernet at 4A100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			host_port_no = <0>;
+			cpdma_reg_ofs = <0x800>;
+			cpdma_sram_ofs = <0xa00>;
+			ale_reg_ofs = <0xd00>;
+			ale_entries = <1024>;
+			host_port_reg_ofs = <0x108>;
+			hw_stats_reg_ofs = <0x900>;
+			bd_ram_ofs = <0x2000>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			reg = <0x4a100000 0x800
+				0x4a101200 0x100
+				0x4a101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+			interrupts = <40 41 42 43>;
+			ranges;
+			cpsw_emac0: slave at 0 {
+				slave_reg_ofs = <0x208>;
+				sliver_reg_ofs = <0xd80>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+			cpsw_emac1: slave at 1 {
+				slave_reg_ofs = <0x308>;
+				sliver_reg_ofs = <0xdc0>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			davinci_mdio: mdio at 4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+
+		};
 	};
 };
--
1.7.0.4

  parent reply	other threads:[~2012-10-29  8:21 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-29  8:21 # (c) 2007, Joe Perches <joe@perches.com> Vaibhav Hiremath
2012-10-29  8:21 ` Vaibhav Hiremath
2012-10-29  8:21 ` Vaibhav Hiremath
2012-10-29  8:21 ` [PATCH-V2 0/4] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-29  8:33   ` Richard Cochran
2012-10-29  8:33     ` Richard Cochran
2012-10-29  8:21 ` [PATCH 1/4] net: davinci_mdio: Fix typo mistake in calling runtime-pm api Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-30 21:33   ` Peter Korsgaard
2012-10-30 21:33     ` Peter Korsgaard
2012-10-30 21:33     ` Peter Korsgaard
2012-10-29  8:21 ` [PATCH 2/4] net: cpsw: Add parent<->child relation support between cpsw and mdio Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-30 21:34   ` Peter Korsgaard
2012-10-30 21:34     ` Peter Korsgaard
2012-10-30 21:34     ` Peter Korsgaard
2012-10-29  8:21 ` [PATCH 3/4] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-30 21:35   ` Peter Korsgaard
2012-10-30 21:35     ` Peter Korsgaard
2012-10-30 21:35     ` Peter Korsgaard
2012-10-29  8:21 ` Vaibhav Hiremath [this message]
2012-10-29  8:21   ` [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX Vaibhav Hiremath
2012-10-29  8:21   ` Vaibhav Hiremath
2012-10-30 21:35   ` Peter Korsgaard
2012-10-30 21:35     ` Peter Korsgaard
2012-10-30 21:35     ` Peter Korsgaard
2012-10-31 15:17   ` Benoit Cousson
2012-10-31 15:17     ` Benoit Cousson
2012-10-31 15:17     ` Benoit Cousson
2012-10-31 19:52     ` Hiremath, Vaibhav
2012-10-31 19:52       ` Hiremath, Vaibhav
2012-11-01  7:45     ` Richard Cochran
2012-11-01  7:45       ` Richard Cochran
2012-11-01  9:28       ` Cousson, Benoit
2012-11-01  9:28         ` Cousson, Benoit
2012-11-01  9:28         ` Cousson, Benoit
2012-11-03 17:45         ` [PATCH RFC net-next 0/1] Simplify the CPSW DT Richard Cochran
2012-11-03 17:45           ` Richard Cochran
2012-11-03 17:45           ` Richard Cochran
2012-11-03 17:45           ` [PATCH RFC net-next 1/1] cpsw: simplify the setup of the register pointers Richard Cochran
2012-11-03 17:45             ` Richard Cochran
2012-11-03 17:45             ` Richard Cochran
2012-11-02  8:46     ` [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX N, Mugunthan V
2012-11-02  8:46       ` N, Mugunthan V
2012-11-02  8:56       ` Richard Cochran
2012-11-02  8:56         ` Richard Cochran
2012-11-02 10:42         ` N, Mugunthan V
2012-11-02 10:42           ` N, Mugunthan V
2012-11-02 15:19           ` Richard Cochran
2012-11-02 15:19             ` Richard Cochran
2012-11-08 12:59     ` Mugunthan V N
2012-11-08 12:59       ` Mugunthan V N
2012-11-08 12:59       ` Mugunthan V N
2012-10-29  9:25 ` # (c) 2007, Joe Perches <joe@perches.com> Vaibhav Hiremath
2012-10-29  9:25   ` Vaibhav Hiremath
2012-10-29  9:25   ` Vaibhav Hiremath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351498881-32482-6-git-send-email-hvaibhav@ti.com \
    --to=hvaibhav@ti.com \
    --cc=b-cousson@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.