From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com,
hali@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH 01/12] drm/msm/dsi: Update generated header for 8960
Date: Wed, 14 Oct 2015 18:28:53 +0530 [thread overview]
Message-ID: <1444827544-25656-2-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1444827544-25656-1-git-send-email-architt@codeaurora.org>
The DSI PLL and PHY registers are already there for 8960, but their
offsets are relative to the top level DSI controller base.
Make the offsets relative to the individual sub blocks. Add "28nm" in
the register names while we're at it.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/dsi/dsi.xml.h | 243 +++++++++++++++++++++++++++-----------
1 file changed, 177 insertions(+), 66 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 1d2e32f..3d6297f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -8,17 +8,8 @@ http://github.com/freedreno/envytools/
git clone https://github.com/freedreno/envytools.git
The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/msm.xml ( 676 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp4.xml ( 20915 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp_common.xml ( 2576 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/mdp/mdp5.xml ( 36021 bytes, from 2015-07-09 22:10:24)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/dsi.xml ( 26057 bytes, from 2015-08-14 21:47:57)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/sfpb.xml ( 344 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/dsi/mmss_cc.xml ( 1686 bytes, from 2015-05-20 20:03:14)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/qfprom.xml ( 600 bytes, from 2015-05-20 20:03:07)
-- /home/robclark/src/freedreno/envytools/rnndb/hdmi/hdmi.xml ( 29154 bytes, from 2015-08-10 21:25:43)
-- /home/robclark/src/freedreno/envytools/rnndb/edp/edp.xml ( 10416 bytes, from 2015-05-20 20:03:14)
+- /local/mnt/workspace/source_trees/envytools/rnndb/../rnndb/dsi/dsi.xml ( 27887 bytes, from 2015-09-02 06:17:10)
+- /local/mnt/workspace/source_trees/envytools/rnndb/freedreno_copyright.xml ( 1453 bytes, from 2015-02-09 03:18:10)
Copyright (C) 2013-2015 by the following authors:
- Rob Clark <robdclark@gmail.com> (robclark)
@@ -567,114 +558,234 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
#define REG_DSI_8x60_PHY_CAL_STATUS 0x000000fc
#define DSI_8x60_PHY_CAL_STATUS_CAL_BUSY 0x10000000
-static inline uint32_t REG_DSI_8960_LN(uint32_t i0) { return 0x00000300 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN(uint32_t i0) { return 0x00000000 + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_CFG_0(uint32_t i0) { return 0x00000300 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_0(uint32_t i0) { return 0x00000000 + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_CFG_1(uint32_t i0) { return 0x00000304 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_1(uint32_t i0) { return 0x00000004 + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_CFG_2(uint32_t i0) { return 0x00000308 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_CFG_2(uint32_t i0) { return 0x00000008 + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_TEST_DATAPATH(uint32_t i0) { return 0x0000030c + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(uint32_t i0) { return 0x0000000c + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_TEST_STR_0(uint32_t i0) { return 0x00000314 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(uint32_t i0) { return 0x00000014 + 0x40*i0; }
-static inline uint32_t REG_DSI_8960_LN_TEST_STR_1(uint32_t i0) { return 0x00000318 + 0x40*i0; }
+static inline uint32_t REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(uint32_t i0) { return 0x00000018 + 0x40*i0; }
-#define REG_DSI_8960_PHY_LNCK_CFG_0 0x00000400
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_0 0x00000100
-#define REG_DSI_8960_PHY_LNCK_CFG_1 0x00000404
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_1 0x00000104
-#define REG_DSI_8960_PHY_LNCK_CFG_2 0x00000408
+#define REG_DSI_28nm_8960_PHY_LNCK_CFG_2 0x00000108
-#define REG_DSI_8960_PHY_LNCK_TEST_DATAPATH 0x0000040c
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH 0x0000010c
-#define REG_DSI_8960_PHY_LNCK_TEST_STR0 0x00000414
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0 0x00000114
-#define REG_DSI_8960_PHY_LNCK_TEST_STR1 0x00000418
+#define REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1 0x00000118
-#define REG_DSI_8960_PHY_TIMING_CTRL_0 0x00000440
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_0 0x00000140
+#define DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_1 0x00000144
+#define DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_2 0x00000148
+#define DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_3 0x0000014c
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_4 0x00000150
+#define DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_5 0x00000154
+#define DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_6 0x00000158
+#define DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_7 0x0000015c
+#define DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_8 0x00000160
+#define DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_9 0x00000164
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__MASK 0x00000007
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO__MASK;
+}
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__MASK 0x00000070
+#define DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__SHIFT 4
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_10 0x00000168
+#define DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__MASK 0x00000007
+#define DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_TIMING_CTRL_11 0x0000016c
+#define DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__MASK 0x000000ff
+#define DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__SHIFT 0
+static inline uint32_t DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(uint32_t val)
+{
+ return ((val) << DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__SHIFT) & DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD__MASK;
+}
+
+#define REG_DSI_28nm_8960_PHY_CTRL_0 0x00000170
+
+#define REG_DSI_28nm_8960_PHY_CTRL_1 0x00000174
+
+#define REG_DSI_28nm_8960_PHY_CTRL_2 0x00000178
+
+#define REG_DSI_28nm_8960_PHY_CTRL_3 0x0000017c
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_0 0x00000180
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_1 0x00000184
+
+#define REG_DSI_28nm_8960_PHY_STRENGTH_2 0x00000188
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_0 0x0000018c
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_1 0x00000190
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_2 0x00000194
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_3 0x00000198
+
+#define REG_DSI_28nm_8960_PHY_BIST_CTRL_4 0x0000019c
-#define REG_DSI_8960_PHY_TIMING_CTRL_1 0x00000444
+#define REG_DSI_28nm_8960_PHY_LDO_CTRL 0x000001b0
-#define REG_DSI_8960_PHY_TIMING_CTRL_2 0x00000448
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0 0x00000000
-#define REG_DSI_8960_PHY_TIMING_CTRL_3 0x0000044c
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1 0x00000004
-#define REG_DSI_8960_PHY_TIMING_CTRL_4 0x00000450
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2 0x00000008
-#define REG_DSI_8960_PHY_TIMING_CTRL_5 0x00000454
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3 0x0000000c
-#define REG_DSI_8960_PHY_TIMING_CTRL_6 0x00000458
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4 0x00000010
-#define REG_DSI_8960_PHY_TIMING_CTRL_7 0x0000045c
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_5 0x00000014
-#define REG_DSI_8960_PHY_TIMING_CTRL_8 0x00000460
+#define REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG 0x00000018
-#define REG_DSI_8960_PHY_TIMING_CTRL_9 0x00000464
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER 0x00000028
-#define REG_DSI_8960_PHY_TIMING_CTRL_10 0x00000468
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_0 0x0000002c
-#define REG_DSI_8960_PHY_TIMING_CTRL_11 0x0000046c
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_1 0x00000030
-#define REG_DSI_8960_PHY_CTRL_0 0x00000470
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2 0x00000034
-#define REG_DSI_8960_PHY_CTRL_1 0x00000474
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0 0x00000038
-#define REG_DSI_8960_PHY_CTRL_2 0x00000478
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1 0x0000003c
-#define REG_DSI_8960_PHY_CTRL_3 0x0000047c
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_2 0x00000040
-#define REG_DSI_8960_PHY_STRENGTH_0 0x00000480
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3 0x00000044
-#define REG_DSI_8960_PHY_STRENGTH_1 0x00000484
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4 0x00000048
-#define REG_DSI_8960_PHY_STRENGTH_2 0x00000488
+#define REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS 0x00000050
+#define DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY 0x00000010
-#define REG_DSI_8960_PHY_BIST_CTRL_0 0x0000048c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_0 0x00000000
+#define DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE 0x00000001
-#define REG_DSI_8960_PHY_BIST_CTRL_1 0x00000490
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_1 0x00000004
-#define REG_DSI_8960_PHY_BIST_CTRL_2 0x00000494
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_2 0x00000008
-#define REG_DSI_8960_PHY_BIST_CTRL_3 0x00000498
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_3 0x0000000c
-#define REG_DSI_8960_PHY_BIST_CTRL_4 0x0000049c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_4 0x00000010
-#define REG_DSI_8960_PHY_LDO_CTRL 0x000004b0
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_5 0x00000014
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_0 0x00000500
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_6 0x00000018
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_1 0x00000504
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_7 0x0000001c
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_2 0x00000508
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_8 0x00000020
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_3 0x0000050c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_9 0x00000024
-#define REG_DSI_8960_PHY_REGULATOR_CTRL_4 0x00000510
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_10 0x00000028
-#define REG_DSI_8960_PHY_REGULATOR_CAL_PWR_CFG 0x00000518
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_11 0x0000002c
-#define REG_DSI_8960_PHY_CAL_HW_TRIGGER 0x00000528
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_12 0x00000030
-#define REG_DSI_8960_PHY_CAL_SW_CFG_0 0x0000052c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_13 0x00000034
-#define REG_DSI_8960_PHY_CAL_SW_CFG_1 0x00000530
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_14 0x00000038
-#define REG_DSI_8960_PHY_CAL_SW_CFG_2 0x00000534
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_15 0x0000003c
-#define REG_DSI_8960_PHY_CAL_HW_CFG_0 0x00000538
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_16 0x00000040
-#define REG_DSI_8960_PHY_CAL_HW_CFG_1 0x0000053c
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_17 0x00000044
-#define REG_DSI_8960_PHY_CAL_HW_CFG_2 0x00000540
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_18 0x00000048
-#define REG_DSI_8960_PHY_CAL_HW_CFG_3 0x00000544
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_19 0x0000004c
-#define REG_DSI_8960_PHY_CAL_HW_CFG_4 0x00000548
+#define REG_DSI_28nm_8960_PHY_PLL_CTRL_20 0x00000050
-#define REG_DSI_8960_PHY_CAL_STATUS 0x00000550
-#define DSI_8960_PHY_CAL_STATUS_CAL_BUSY 0x00000010
+#define REG_DSI_28nm_8960_PHY_PLL_RDY 0x00000080
+#define DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY 0x00000001
static inline uint32_t REG_DSI_28nm_PHY_LN(uint32_t i0) { return 0x00000000 + 0x40*i0; }
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-10-14 12:58 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 12:58 [PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-10-14 12:58 ` Archit Taneja [this message]
2015-10-14 12:58 ` [PATCH 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-10-14 20:35 ` Stephen Boyd
2015-10-16 13:08 ` Archit Taneja
2015-10-16 18:28 ` Stephen Boyd
2015-10-14 12:58 ` [PATCH 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-10-14 12:58 ` [PATCH 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-10-14 12:58 ` [PATCH 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-10-14 12:58 ` [PATCH 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-10-14 12:59 ` [PATCH 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 10/12] drm/msm/dsi: SFPB: Update generated headers Archit Taneja
2015-10-14 12:59 ` [PATCH 11/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-10-14 12:59 ` [PATCH 12/12] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 10:55 ` [PATCH v2 00/10] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 01/10] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 02/10] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-11-18 10:55 ` [PATCH v2 03/10] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-11-18 10:55 ` [PATCH v2 04/10] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-11-18 10:55 ` [PATCH v2 05/10] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-11-18 10:55 ` [PATCH v2 06/10] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 07/10] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 08/10] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 09/10] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-11-18 10:55 ` [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 13:18 ` Rob Herring
2015-11-18 15:24 ` Archit Taneja
[not found] ` <564C981F.3040907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-20 19:59 ` Rob Herring
2015-11-23 6:13 ` Archit Taneja
2015-12-02 8:20 ` Stephen Boyd
2015-12-02 8:34 ` Stephen Boyd
2015-12-07 6:51 ` Archit Taneja
2015-12-02 9:56 ` Archit Taneja
2015-12-03 7:16 ` Stephen Boyd
2015-12-03 11:11 ` Archit Taneja
2015-12-01 9:59 ` [PATCH v3 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-12-01 9:59 ` [PATCH v3 01/12] drm/msm/dsi: Don't get byte/pixel source clocks from DT Archit Taneja
2015-12-01 10:00 ` [PATCH v3 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-12-01 10:00 ` [PATCH v3 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-12-01 10:00 ` [PATCH v3 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-12-01 10:00 ` [PATCH v3 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-12-01 10:00 ` [PATCH v3 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 10/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-12-01 10:00 ` [PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed Archit Taneja
2015-12-04 14:45 ` Rob Herring
2015-12-01 10:00 ` [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation Archit Taneja
2015-12-04 14:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444827544-25656-2-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hali@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.