From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH v3 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064
Date: Tue, 1 Dec 2015 15:29:58 +0530 [thread overview]
Message-ID: <1448964010-18207-1-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1447844131-4182-1-git-send-email-architt@codeaurora.org>
Add support for DSI on 8960/8064. The DSI IP used in these chips is an
older version(DSIv2) of what we have right now(DSI6G).
The bulk of the additions come thanks to a different PHY/PLL. The DSI
host in itself doesn't have too many changes.
Changes in v3:
- Add a patch that removes the need to provide source clocks (RCG clocks)
via DT, as suggested by Rob Herring.
- Make cleaner dt-binding doc patches.
Changes in v2:
- Incorporated Stephen's comments for the DSI PLL patch.
- The dsi.xml.h and sfpb.xml.h changes were already picked up by Rob.
Removed those patches.
Archit Taneja (12):
drm/msm/dsi: Don't get byte/pixel source clocks from DT
drm/msm/dsi: Add support for 28nm PHY on 8960
drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
drm/msm/dsi: Use a better way to figure out DSI version
drm/msm/dsi: Delay dsi_clk_init
drm/msm/dsi: Parse bus clocks from a list
drm/msm/dsi: Set up link clocks for DSIv2
drm/msm/dsi: Add dsi_cfg for APQ8064
drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
drm/msm/dsi: Enable MMSS SPFB port via syscon
dt-bindings: msm/dsi: Fix the order in which clocks are listed
dt-bindings: msm/dsi: Add DSIv2 documentation
.../devicetree/bindings/display/msm/dsi.txt | 12 +-
drivers/gpu/drm/msm/Kconfig | 8 +
drivers/gpu/drm/msm/Makefile | 2 +
drivers/gpu/drm/msm/dsi/dsi.h | 6 +-
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 35 +-
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 4 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 508 ++++++++++++++------
drivers/gpu/drm/msm/dsi/dsi_manager.c | 6 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 195 ++++++++
drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 3 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 10 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 533 +++++++++++++++++++++
14 files changed, 1178 insertions(+), 149 deletions(-)
create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-12-01 9:59 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 12:58 [PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-10-14 12:58 ` [PATCH 01/12] drm/msm/dsi: Update generated header for 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-10-14 20:35 ` Stephen Boyd
2015-10-16 13:08 ` Archit Taneja
2015-10-16 18:28 ` Stephen Boyd
2015-10-14 12:58 ` [PATCH 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-10-14 12:58 ` [PATCH 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-10-14 12:58 ` [PATCH 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-10-14 12:58 ` [PATCH 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-10-14 12:59 ` [PATCH 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 10/12] drm/msm/dsi: SFPB: Update generated headers Archit Taneja
2015-10-14 12:59 ` [PATCH 11/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-10-14 12:59 ` [PATCH 12/12] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 10:55 ` [PATCH v2 00/10] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 01/10] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 02/10] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-11-18 10:55 ` [PATCH v2 03/10] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-11-18 10:55 ` [PATCH v2 04/10] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-11-18 10:55 ` [PATCH v2 05/10] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-11-18 10:55 ` [PATCH v2 06/10] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 07/10] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 08/10] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 09/10] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-11-18 10:55 ` [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 13:18 ` Rob Herring
2015-11-18 15:24 ` Archit Taneja
[not found] ` <564C981F.3040907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-20 19:59 ` Rob Herring
2015-11-23 6:13 ` Archit Taneja
2015-12-02 8:20 ` Stephen Boyd
2015-12-02 8:34 ` Stephen Boyd
2015-12-07 6:51 ` Archit Taneja
2015-12-02 9:56 ` Archit Taneja
2015-12-03 7:16 ` Stephen Boyd
2015-12-03 11:11 ` Archit Taneja
2015-12-01 9:59 ` Archit Taneja [this message]
2015-12-01 9:59 ` [PATCH v3 01/12] drm/msm/dsi: Don't get byte/pixel source clocks from DT Archit Taneja
2015-12-01 10:00 ` [PATCH v3 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-12-01 10:00 ` [PATCH v3 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-12-01 10:00 ` [PATCH v3 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-12-01 10:00 ` [PATCH v3 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-12-01 10:00 ` [PATCH v3 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 10/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-12-01 10:00 ` [PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed Archit Taneja
2015-12-04 14:45 ` Rob Herring
2015-12-01 10:00 ` [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation Archit Taneja
2015-12-04 14:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448964010-18207-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.