All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jens Kuske <jenskuske@gmail.com>
To: "Maxime Ripard" <maxime.ripard@free-electrons.com>,
	"Chen-Yu Tsai" <wens@csie.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Emilio López" <emilio@elopez.com.ar>
Cc: Vishnu Patekar <vishnupatekar0510@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	Jens Kuske <jenskuske@gmail.com>
Subject: [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support
Date: Wed, 21 Oct 2015 18:20:28 +0200	[thread overview]
Message-ID: <1445444428-4652-3-git-send-email-jenskuske@gmail.com> (raw)
In-Reply-To: <1445444428-4652-1-git-send-email-jenskuske@gmail.com>

The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.

Signed-off-by: Jens Kuske <jenskuske@gmail.com>
---
 arch/arm/boot/dts/Makefile                   |  3 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35a3cf4..bedf51b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -643,7 +643,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000..e67df59
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
-- 
2.6.1


WARNING: multiple messages have this Message-ID (diff)
From: Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: "Maxime Ripard"
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	"Chen-Yu Tsai" <wens-jdAy2FN1RRM@public.gmane.org>,
	"Michael Turquette"
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	"Linus Walleij"
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Philipp Zabel" <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"Emilio López" <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>
Cc: Vishnu Patekar
	<vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support
Date: Wed, 21 Oct 2015 18:20:28 +0200	[thread overview]
Message-ID: <1445444428-4652-3-git-send-email-jenskuske@gmail.com> (raw)
In-Reply-To: <1445444428-4652-1-git-send-email-jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.

Signed-off-by: Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/Makefile                   |  3 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35a3cf4..bedf51b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -643,7 +643,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000..e67df59
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
-- 
2.6.1

WARNING: multiple messages have this Message-ID (diff)
From: jenskuske@gmail.com (Jens Kuske)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support
Date: Wed, 21 Oct 2015 18:20:28 +0200	[thread overview]
Message-ID: <1445444428-4652-3-git-send-email-jenskuske@gmail.com> (raw)
In-Reply-To: <1445444428-4652-1-git-send-email-jenskuske@gmail.com>

The Orange Pi Plus is a SBC based on the Allwinner H3 SoC
with 8GB eMMC, multiple USB ports through a USB hub chip, SATA through
a USB-SATA bridge, one uSD slot, a 10/100/1000M ethernet port,
WiFi, HDMI, headphone jack, IR receiver, a microphone, a CSI connector
and a 40-pin GPIO header.

Signed-off-by: Jens Kuske <jenskuske@gmail.com>
---
 arch/arm/boot/dts/Makefile                   |  3 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 77 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35a3cf4..bedf51b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -643,7 +643,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 0000000..e67df59
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
-- 
2.6.1

  parent reply	other threads:[~2015-10-21 16:20 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-21 16:20 [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-10-21 16:20   ` Jens Kuske
2015-10-21 16:20   ` Jens Kuske
2015-10-22  8:05   ` Maxime Ripard
2015-10-22  8:05     ` Maxime Ripard
2015-10-22  8:05     ` Maxime Ripard
2015-10-22  8:29     ` Jean-Francois Moine
2015-10-22  8:29       ` Jean-Francois Moine
2015-10-22  8:29       ` Jean-Francois Moine
2015-10-22  8:47       ` Maxime Ripard
2015-10-22  8:47         ` Maxime Ripard
2015-10-22  8:47         ` Maxime Ripard
2015-10-22  8:57         ` Jean-Francois Moine
2015-10-22  8:57           ` Jean-Francois Moine
2015-10-22  8:57           ` Jean-Francois Moine
2015-10-22  9:14           ` Maxime Ripard
2015-10-22  9:14             ` Maxime Ripard
2015-10-22  9:14             ` Maxime Ripard
2015-10-22 11:30             ` Jens Kuske
2015-10-22 11:30               ` Jens Kuske
2015-10-22 11:30               ` Jens Kuske
2015-10-23 18:09               ` Maxime Ripard
2015-10-23 18:09                 ` Maxime Ripard
2015-10-23 18:09                 ` Maxime Ripard
2015-10-22 17:30   ` Jean-Francois Moine
2015-10-22 17:30     ` Jean-Francois Moine
2015-10-22 17:30     ` Jean-Francois Moine
2015-10-23 18:14   ` Maxime Ripard
2015-10-23 18:14     ` Maxime Ripard
2015-10-23 18:14     ` Maxime Ripard
2015-10-23 19:20     ` Jean-Francois Moine
2015-10-23 19:20       ` Jean-Francois Moine
2015-10-23 19:20       ` Jean-Francois Moine
2015-10-24  7:13       ` Maxime Ripard
2015-10-24  7:13         ` Maxime Ripard
2015-10-24  7:13         ` Maxime Ripard
2015-10-24  8:47         ` Jean-Francois Moine
2015-10-24  8:47           ` Jean-Francois Moine
2015-10-24  8:47           ` Jean-Francois Moine
2015-10-26 21:06           ` Maxime Ripard
2015-10-26 21:06             ` Maxime Ripard
2015-10-26 21:06             ` Maxime Ripard
2015-10-27  8:12             ` [linux-sunxi] " Hans de Goede
2015-10-27  8:12               ` Hans de Goede
2015-10-27  8:12               ` Hans de Goede
2015-10-24  8:39     ` [linux-sunxi] " Hans de Goede
2015-10-24  8:39       ` Hans de Goede
2015-10-24  8:39       ` Hans de Goede
2015-10-26 21:00       ` [linux-sunxi] " Maxime Ripard
2015-10-26 21:00         ` Maxime Ripard
2015-10-26 21:00         ` Maxime Ripard
2015-10-21 16:20 ` Jens Kuske [this message]
2015-10-21 16:20   ` [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske
2015-10-21 16:20   ` Jens Kuske
2015-10-22  7:58 ` [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Maxime Ripard
2015-10-22  7:58   ` Maxime Ripard
2015-10-22  7:58   ` Maxime Ripard
2015-10-27 16:54   ` Jens Kuske
2015-10-27 16:54     ` Jens Kuske
2015-10-27 16:54     ` Jens Kuske
  -- strict thread matches above, loose matches on Subject: below --
2015-05-06  9:31 [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-06  9:31 ` [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske
2015-05-06  9:31   ` Jens Kuske
2015-05-06  9:31   ` Jens Kuske

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445444428-4652-3-git-send-email-jenskuske@gmail.com \
    --to=jenskuske@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emilio@elopez.com.ar \
    --cc=hdegoede@redhat.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=vishnupatekar0510@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.