From: Jean-Francois Moine <moinejf@free.fr>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: "Jens Kuske" <jenskuske@gmail.com>,
devicetree@vger.kernel.org,
"Vishnu Patekar" <vishnupatekar0510@gmail.com>,
"Emilio López" <emilio@elopez.com.ar>,
"Michael Turquette" <mturquette@baylibre.com>,
linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
"Hans de Goede" <hdegoede@redhat.com>,
"Chen-Yu Tsai" <wens@csie.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI
Date: Thu, 22 Oct 2015 10:57:45 +0200 [thread overview]
Message-ID: <20151022105745.2cc158a3@OPI2> (raw)
In-Reply-To: <20151022084735.GR10947@lukather>
On Thu, 22 Oct 2015 10:47:35 +0200
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
> Not really. The uart0 reset is the bit 16, in the reset register 4.
>
> 4 * 32 + 16 = 44.
>
> Not 112, but still not 208 either.
The registers are numbered 1..5, then
(4 - 1) * 32 + 16 = 112
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
WARNING: multiple messages have this Message-ID (diff)
From: Jean-Francois Moine <moinejf-GANU6spQydw@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: "Jens Kuske" <jenskuske-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Vishnu Patekar"
<vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Emilio López" <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
"Michael Turquette"
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Hans de Goede"
<hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
"Chen-Yu Tsai" <wens-jdAy2FN1RRM@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Philipp Zabel" <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Linus Walleij"
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI
Date: Thu, 22 Oct 2015 10:57:45 +0200 [thread overview]
Message-ID: <20151022105745.2cc158a3@OPI2> (raw)
In-Reply-To: <20151022084735.GR10947@lukather>
On Thu, 22 Oct 2015 10:47:35 +0200
Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> Not really. The uart0 reset is the bit 16, in the reset register 4.
>
> 4 * 32 + 16 = 44.
>
> Not 112, but still not 208 either.
The registers are numbered 1..5, then
(4 - 1) * 32 + 16 = 112
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: moinejf@free.fr (Jean-Francois Moine)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI
Date: Thu, 22 Oct 2015 10:57:45 +0200 [thread overview]
Message-ID: <20151022105745.2cc158a3@OPI2> (raw)
In-Reply-To: <20151022084735.GR10947@lukather>
On Thu, 22 Oct 2015 10:47:35 +0200
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
> Not really. The uart0 reset is the bit 16, in the reset register 4.
>
> 4 * 32 + 16 = 44.
>
> Not 112, but still not 208 either.
The registers are numbered 1..5, then
(4 - 1) * 32 + 16 = 112
--
Ken ar c'henta? | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
next prev parent reply other threads:[~2015-10-22 8:58 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 16:20 [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-22 8:05 ` Maxime Ripard
2015-10-22 8:05 ` Maxime Ripard
2015-10-22 8:05 ` Maxime Ripard
2015-10-22 8:29 ` Jean-Francois Moine
2015-10-22 8:29 ` Jean-Francois Moine
2015-10-22 8:29 ` Jean-Francois Moine
2015-10-22 8:47 ` Maxime Ripard
2015-10-22 8:47 ` Maxime Ripard
2015-10-22 8:47 ` Maxime Ripard
2015-10-22 8:57 ` Jean-Francois Moine [this message]
2015-10-22 8:57 ` Jean-Francois Moine
2015-10-22 8:57 ` Jean-Francois Moine
2015-10-22 9:14 ` Maxime Ripard
2015-10-22 9:14 ` Maxime Ripard
2015-10-22 9:14 ` Maxime Ripard
2015-10-22 11:30 ` Jens Kuske
2015-10-22 11:30 ` Jens Kuske
2015-10-22 11:30 ` Jens Kuske
2015-10-23 18:09 ` Maxime Ripard
2015-10-23 18:09 ` Maxime Ripard
2015-10-23 18:09 ` Maxime Ripard
2015-10-22 17:30 ` Jean-Francois Moine
2015-10-22 17:30 ` Jean-Francois Moine
2015-10-22 17:30 ` Jean-Francois Moine
2015-10-23 18:14 ` Maxime Ripard
2015-10-23 18:14 ` Maxime Ripard
2015-10-23 18:14 ` Maxime Ripard
2015-10-23 19:20 ` Jean-Francois Moine
2015-10-23 19:20 ` Jean-Francois Moine
2015-10-23 19:20 ` Jean-Francois Moine
2015-10-24 7:13 ` Maxime Ripard
2015-10-24 7:13 ` Maxime Ripard
2015-10-24 7:13 ` Maxime Ripard
2015-10-24 8:47 ` Jean-Francois Moine
2015-10-24 8:47 ` Jean-Francois Moine
2015-10-24 8:47 ` Jean-Francois Moine
2015-10-26 21:06 ` Maxime Ripard
2015-10-26 21:06 ` Maxime Ripard
2015-10-26 21:06 ` Maxime Ripard
2015-10-27 8:12 ` [linux-sunxi] " Hans de Goede
2015-10-27 8:12 ` Hans de Goede
2015-10-27 8:12 ` Hans de Goede
2015-10-24 8:39 ` [linux-sunxi] " Hans de Goede
2015-10-24 8:39 ` Hans de Goede
2015-10-24 8:39 ` Hans de Goede
2015-10-26 21:00 ` [linux-sunxi] " Maxime Ripard
2015-10-26 21:00 ` Maxime Ripard
2015-10-26 21:00 ` Maxime Ripard
2015-10-21 16:20 ` [PATCH 6/6] ARM: dts: sun8i: Add Orange Pi Plus support Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-21 16:20 ` Jens Kuske
2015-10-22 7:58 ` [PATCH 4/6] reset: sunxi: Add compatible for Allwinner H3 bus resets Maxime Ripard
2015-10-22 7:58 ` Maxime Ripard
2015-10-22 7:58 ` Maxime Ripard
2015-10-27 16:54 ` Jens Kuske
2015-10-27 16:54 ` Jens Kuske
2015-10-27 16:54 ` Jens Kuske
-- strict thread matches above, loose matches on Subject: below --
2015-05-06 9:31 [PATCH 0/6] ARM: sunxi: Introduce Allwinner H3 support Jens Kuske
2015-05-06 9:31 ` [PATCH 5/6] ARM: dts: sunxi: Add Allwinner H3 DTSI Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 9:31 ` Jens Kuske
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 12:19 ` Maxime Ripard
2015-05-06 20:47 ` Jens Kuske
2015-05-06 20:47 ` Jens Kuske
2015-05-06 20:47 ` Jens Kuske
2015-05-09 11:44 ` Maxime Ripard
2015-05-09 11:44 ` Maxime Ripard
2015-05-09 11:44 ` Maxime Ripard
2015-05-11 8:11 ` Chen-Yu Tsai
2015-05-11 8:11 ` Chen-Yu Tsai
2015-05-11 8:11 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151022105745.2cc158a3@OPI2 \
--to=moinejf@free.fr \
--cc=devicetree@vger.kernel.org \
--cc=emilio@elopez.com.ar \
--cc=hdegoede@redhat.com \
--cc=jenskuske@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vishnupatekar0510@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.