All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoffer Dall <christoffer.dall@linaro.org>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
	Andre Przywara <andre.przywara@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu
Subject: [PULL 21/59] KVM: arm/arm64: vgic-new: Add GICv2 world switch backend
Date: Tue, 24 May 2016 11:09:15 +0200	[thread overview]
Message-ID: <1464080993-10884-22-git-send-email-christoffer.dall@linaro.org> (raw)
In-Reply-To: <1464080993-10884-1-git-send-email-christoffer.dall@linaro.org>

From: Marc Zyngier <marc.zyngier@arm.com>

Processing maintenance interrupts and accessing the list registers
are dependent on the host's GIC version.
Introduce vgic-v2.c to contain GICv2 specific functions.
Implement the GICv2 specific code for syncing the emulation state
into the VGIC registers.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
 include/linux/irqchip/arm-gic.h |   1 +
 virt/kvm/arm/vgic/vgic-v2.c     | 176 ++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.c        |   6 ++
 virt/kvm/arm/vgic/vgic.h        |   6 ++
 4 files changed, 189 insertions(+)
 create mode 100644 virt/kvm/arm/vgic/vgic-v2.c

diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 9c94026..be0d26f 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -76,6 +76,7 @@
 #define GICH_LR_VIRTUALID		(0x3ff << 0)
 #define GICH_LR_PHYSID_CPUID_SHIFT	(10)
 #define GICH_LR_PHYSID_CPUID		(0x3ff << GICH_LR_PHYSID_CPUID_SHIFT)
+#define GICH_LR_PRIORITY_SHIFT		23
 #define GICH_LR_STATE			(3 << 28)
 #define GICH_LR_PENDING_BIT		(1 << 28)
 #define GICH_LR_ACTIVE_BIT		(1 << 29)
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
new file mode 100644
index 0000000..fb5e65c
--- /dev/null
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/irqchip/arm-gic.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include "vgic.h"
+
+/*
+ * Call this function to convert a u64 value to an unsigned long * bitmask
+ * in a way that works on both 32-bit and 64-bit LE and BE platforms.
+ *
+ * Warning: Calling this function may modify *val.
+ */
+static unsigned long *u64_to_bitmask(u64 *val)
+{
+#if defined(CONFIG_CPU_BIG_ENDIAN) && BITS_PER_LONG == 32
+	*val = (*val >> 32) | (*val << 32);
+#endif
+	return (unsigned long *)val;
+}
+
+void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	if (cpuif->vgic_misr & GICH_MISR_EOI) {
+		u64 eisr = cpuif->vgic_eisr;
+		unsigned long *eisr_bmap = u64_to_bitmask(&eisr);
+		int lr;
+
+		for_each_set_bit(lr, eisr_bmap, kvm_vgic_global_state.nr_lr) {
+			u32 intid = cpuif->vgic_lr[lr] & GICH_LR_VIRTUALID;
+
+			WARN_ON(cpuif->vgic_lr[lr] & GICH_LR_STATE);
+
+			kvm_notify_acked_irq(vcpu->kvm, 0,
+					     intid - VGIC_NR_PRIVATE_IRQS);
+		}
+	}
+
+	/* check and disable underflow maintenance IRQ */
+	cpuif->vgic_hcr &= ~GICH_HCR_UIE;
+
+	/*
+	 * In the next iterations of the vcpu loop, if we sync the
+	 * vgic state after flushing it, but before entering the guest
+	 * (this happens for pending signals and vmid rollovers), then
+	 * make sure we don't pick up any old maintenance interrupts
+	 * here.
+	 */
+	cpuif->vgic_eisr = 0;
+}
+
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	cpuif->vgic_hcr |= GICH_HCR_UIE;
+}
+
+/*
+ * transfer the content of the LRs back into the corresponding ap_list:
+ * - active bit is transferred as is
+ * - pending bit is
+ *   - transferred as is in case of edge sensitive IRQs
+ *   - set to the line-level (resample time) for level sensitive IRQs
+ */
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+	int lr;
+
+	for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) {
+		u32 val = cpuif->vgic_lr[lr];
+		u32 intid = val & GICH_LR_VIRTUALID;
+		struct vgic_irq *irq;
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
+
+		spin_lock(&irq->irq_lock);
+
+		/* Always preserve the active bit */
+		irq->active = !!(val & GICH_LR_ACTIVE_BIT);
+
+		/* Edge is the only case where we preserve the pending bit */
+		if (irq->config == VGIC_CONFIG_EDGE &&
+		    (val & GICH_LR_PENDING_BIT)) {
+			irq->pending = true;
+
+			if (vgic_irq_is_sgi(intid)) {
+				u32 cpuid = val & GICH_LR_PHYSID_CPUID;
+
+				cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
+				irq->source |= (1 << cpuid);
+			}
+		}
+
+		/* Clear soft pending state when level IRQs have been acked */
+		if (irq->config == VGIC_CONFIG_LEVEL &&
+		    !(val & GICH_LR_PENDING_BIT)) {
+			irq->soft_pending = false;
+			irq->pending = irq->line_level;
+		}
+
+		spin_unlock(&irq->irq_lock);
+	}
+}
+
+/*
+ * Populates the particular LR with the state of a given IRQ:
+ * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq
+ * - for a level sensitive IRQ the pending state value is unchanged;
+ *   it is dictated directly by the input level
+ *
+ * If @irq describes an SGI with multiple sources, we choose the
+ * lowest-numbered source VCPU and clear that bit in the source bitmap.
+ *
+ * The irq_lock must be held by the caller.
+ */
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 val = irq->intid;
+
+	if (irq->pending) {
+		val |= GICH_LR_PENDING_BIT;
+
+		if (irq->config == VGIC_CONFIG_EDGE)
+			irq->pending = false;
+
+		if (vgic_irq_is_sgi(irq->intid)) {
+			u32 src = ffs(irq->source);
+
+			BUG_ON(!src);
+			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
+			irq->source &= ~(1 << (src - 1));
+			if (irq->source)
+				irq->pending = true;
+		}
+	}
+
+	if (irq->active)
+		val |= GICH_LR_ACTIVE_BIT;
+
+	if (irq->hw) {
+		val |= GICH_LR_HW;
+		val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT;
+	} else {
+		if (irq->config == VGIC_CONFIG_LEVEL)
+			val |= GICH_LR_EOI;
+	}
+
+	/* The GICv2 LR only holds five bits of priority. */
+	val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT;
+
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
+}
+
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr)
+{
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = 0;
+}
diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
index 08a862a..44d2533 100644
--- a/virt/kvm/arm/vgic/vgic.c
+++ b/virt/kvm/arm/vgic/vgic.c
@@ -400,10 +400,12 @@ retry:
 
 static inline void vgic_process_maintenance_interrupt(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_process_maintenance(vcpu);
 }
 
 static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_fold_lr_state(vcpu);
 }
 
 /* Requires the irq_lock to be held. */
@@ -411,14 +413,18 @@ static inline void vgic_populate_lr(struct kvm_vcpu *vcpu,
 				    struct vgic_irq *irq, int lr)
 {
 	DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&irq->irq_lock));
+
+	vgic_v2_populate_lr(vcpu, irq, lr);
 }
 
 static inline void vgic_clear_lr(struct kvm_vcpu *vcpu, int lr)
 {
+	vgic_v2_clear_lr(vcpu, lr);
 }
 
 static inline void vgic_set_underflow(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_set_underflow(vcpu);
 }
 
 /* Requires the ap_list_lock to be held. */
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 29b96b9..0db490e 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -22,4 +22,10 @@ struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
 			      u32 intid);
 bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq);
 
+void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu);
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr);
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
+
 #endif
-- 
2.1.2.330.g565301e.dirty

WARNING: multiple messages have this Message-ID (diff)
From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PULL 21/59] KVM: arm/arm64: vgic-new: Add GICv2 world switch backend
Date: Tue, 24 May 2016 11:09:15 +0200	[thread overview]
Message-ID: <1464080993-10884-22-git-send-email-christoffer.dall@linaro.org> (raw)
In-Reply-To: <1464080993-10884-1-git-send-email-christoffer.dall@linaro.org>

From: Marc Zyngier <marc.zyngier@arm.com>

Processing maintenance interrupts and accessing the list registers
are dependent on the host's GIC version.
Introduce vgic-v2.c to contain GICv2 specific functions.
Implement the GICv2 specific code for syncing the emulation state
into the VGIC registers.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
---
 include/linux/irqchip/arm-gic.h |   1 +
 virt/kvm/arm/vgic/vgic-v2.c     | 176 ++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.c        |   6 ++
 virt/kvm/arm/vgic/vgic.h        |   6 ++
 4 files changed, 189 insertions(+)
 create mode 100644 virt/kvm/arm/vgic/vgic-v2.c

diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h
index 9c94026..be0d26f 100644
--- a/include/linux/irqchip/arm-gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -76,6 +76,7 @@
 #define GICH_LR_VIRTUALID		(0x3ff << 0)
 #define GICH_LR_PHYSID_CPUID_SHIFT	(10)
 #define GICH_LR_PHYSID_CPUID		(0x3ff << GICH_LR_PHYSID_CPUID_SHIFT)
+#define GICH_LR_PRIORITY_SHIFT		23
 #define GICH_LR_STATE			(3 << 28)
 #define GICH_LR_PENDING_BIT		(1 << 28)
 #define GICH_LR_ACTIVE_BIT		(1 << 29)
diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
new file mode 100644
index 0000000..fb5e65c
--- /dev/null
+++ b/virt/kvm/arm/vgic/vgic-v2.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/irqchip/arm-gic.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include "vgic.h"
+
+/*
+ * Call this function to convert a u64 value to an unsigned long * bitmask
+ * in a way that works on both 32-bit and 64-bit LE and BE platforms.
+ *
+ * Warning: Calling this function may modify *val.
+ */
+static unsigned long *u64_to_bitmask(u64 *val)
+{
+#if defined(CONFIG_CPU_BIG_ENDIAN) && BITS_PER_LONG == 32
+	*val = (*val >> 32) | (*val << 32);
+#endif
+	return (unsigned long *)val;
+}
+
+void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	if (cpuif->vgic_misr & GICH_MISR_EOI) {
+		u64 eisr = cpuif->vgic_eisr;
+		unsigned long *eisr_bmap = u64_to_bitmask(&eisr);
+		int lr;
+
+		for_each_set_bit(lr, eisr_bmap, kvm_vgic_global_state.nr_lr) {
+			u32 intid = cpuif->vgic_lr[lr] & GICH_LR_VIRTUALID;
+
+			WARN_ON(cpuif->vgic_lr[lr] & GICH_LR_STATE);
+
+			kvm_notify_acked_irq(vcpu->kvm, 0,
+					     intid - VGIC_NR_PRIVATE_IRQS);
+		}
+	}
+
+	/* check and disable underflow maintenance IRQ */
+	cpuif->vgic_hcr &= ~GICH_HCR_UIE;
+
+	/*
+	 * In the next iterations of the vcpu loop, if we sync the
+	 * vgic state after flushing it, but before entering the guest
+	 * (this happens for pending signals and vmid rollovers), then
+	 * make sure we don't pick up any old maintenance interrupts
+	 * here.
+	 */
+	cpuif->vgic_eisr = 0;
+}
+
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	cpuif->vgic_hcr |= GICH_HCR_UIE;
+}
+
+/*
+ * transfer the content of the LRs back into the corresponding ap_list:
+ * - active bit is transferred as is
+ * - pending bit is
+ *   - transferred as is in case of edge sensitive IRQs
+ *   - set to the line-level (resample time) for level sensitive IRQs
+ */
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+	int lr;
+
+	for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) {
+		u32 val = cpuif->vgic_lr[lr];
+		u32 intid = val & GICH_LR_VIRTUALID;
+		struct vgic_irq *irq;
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
+
+		spin_lock(&irq->irq_lock);
+
+		/* Always preserve the active bit */
+		irq->active = !!(val & GICH_LR_ACTIVE_BIT);
+
+		/* Edge is the only case where we preserve the pending bit */
+		if (irq->config == VGIC_CONFIG_EDGE &&
+		    (val & GICH_LR_PENDING_BIT)) {
+			irq->pending = true;
+
+			if (vgic_irq_is_sgi(intid)) {
+				u32 cpuid = val & GICH_LR_PHYSID_CPUID;
+
+				cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
+				irq->source |= (1 << cpuid);
+			}
+		}
+
+		/* Clear soft pending state when level IRQs have been acked */
+		if (irq->config == VGIC_CONFIG_LEVEL &&
+		    !(val & GICH_LR_PENDING_BIT)) {
+			irq->soft_pending = false;
+			irq->pending = irq->line_level;
+		}
+
+		spin_unlock(&irq->irq_lock);
+	}
+}
+
+/*
+ * Populates the particular LR with the state of a given IRQ:
+ * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq
+ * - for a level sensitive IRQ the pending state value is unchanged;
+ *   it is dictated directly by the input level
+ *
+ * If @irq describes an SGI with multiple sources, we choose the
+ * lowest-numbered source VCPU and clear that bit in the source bitmap.
+ *
+ * The irq_lock must be held by the caller.
+ */
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 val = irq->intid;
+
+	if (irq->pending) {
+		val |= GICH_LR_PENDING_BIT;
+
+		if (irq->config == VGIC_CONFIG_EDGE)
+			irq->pending = false;
+
+		if (vgic_irq_is_sgi(irq->intid)) {
+			u32 src = ffs(irq->source);
+
+			BUG_ON(!src);
+			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
+			irq->source &= ~(1 << (src - 1));
+			if (irq->source)
+				irq->pending = true;
+		}
+	}
+
+	if (irq->active)
+		val |= GICH_LR_ACTIVE_BIT;
+
+	if (irq->hw) {
+		val |= GICH_LR_HW;
+		val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT;
+	} else {
+		if (irq->config == VGIC_CONFIG_LEVEL)
+			val |= GICH_LR_EOI;
+	}
+
+	/* The GICv2 LR only holds five bits of priority. */
+	val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT;
+
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
+}
+
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr)
+{
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = 0;
+}
diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
index 08a862a..44d2533 100644
--- a/virt/kvm/arm/vgic/vgic.c
+++ b/virt/kvm/arm/vgic/vgic.c
@@ -400,10 +400,12 @@ retry:
 
 static inline void vgic_process_maintenance_interrupt(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_process_maintenance(vcpu);
 }
 
 static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_fold_lr_state(vcpu);
 }
 
 /* Requires the irq_lock to be held. */
@@ -411,14 +413,18 @@ static inline void vgic_populate_lr(struct kvm_vcpu *vcpu,
 				    struct vgic_irq *irq, int lr)
 {
 	DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&irq->irq_lock));
+
+	vgic_v2_populate_lr(vcpu, irq, lr);
 }
 
 static inline void vgic_clear_lr(struct kvm_vcpu *vcpu, int lr)
 {
+	vgic_v2_clear_lr(vcpu, lr);
 }
 
 static inline void vgic_set_underflow(struct kvm_vcpu *vcpu)
 {
+	vgic_v2_set_underflow(vcpu);
 }
 
 /* Requires the ap_list_lock to be held. */
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 29b96b9..0db490e 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -22,4 +22,10 @@ struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
 			      u32 intid);
 bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq);
 
+void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu);
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr);
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
+
 #endif
-- 
2.1.2.330.g565301e.dirty

  parent reply	other threads:[~2016-05-24  9:09 UTC|newest]

Thread overview: 121+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-24  9:08 [PULL 00/59] KVM/ARM Changes for v4.7 take 2 Christoffer Dall
2016-05-24  9:08 ` Christoffer Dall
2016-05-24  9:08 ` [PULL 01/59] kvm: arm64: Fix EC field in inject_abt64 Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:08 ` [PULL 02/59] KVM: arm/arm64: vgic: streamline vgic_update_irq_pending() interface Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:08 ` [PULL 03/59] KVM: arm/arm64: vgic: avoid map in kvm_vgic_inject_mapped_irq() Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:08 ` [PULL 04/59] KVM: arm/arm64: vgic: avoid map in kvm_vgic_map_is_active() Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:08 ` [PULL 05/59] KVM: arm/arm64: vgic: avoid map in kvm_vgic_unmap_phys_irq() Christoffer Dall
2016-05-24  9:08   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 06/59] KVM: arm/arm64: Remove the IRQ field from struct irq_phys_map Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 07/59] KVM: arm/arm64: arch_timer: Remove irq_phys_map Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 08/59] KVM: arm/arm64: vgic: Remove irq_phys_map from interface Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 09/59] KVM: arm/arm64: Move timer IRQ map to latest possible time Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 10/59] KVM: arm/arm64: Get rid of vgic_cpu->nr_lr Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 11/59] KVM: arm/arm64: Fix MMIO emulation data handling Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 12/59] KVM: arm/arm64: Export mmio_read/write_bus Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 13/59] KVM: arm/arm64: pmu: abstract access to number of SPIs Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 14/59] KVM: arm/arm64: Provide functionality to pause and resume a guest Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 15/59] KVM: arm/arm64: move GICv2 emulation defines into arm-gic-v3.h Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 16/59] KVM: arm/arm64: vgic-new: Add data structure definitions Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 17/59] KVM: arm/arm64: vgic-new: Add acccessor to new struct vgic_irq instance Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 18/59] KVM: arm/arm64: vgic-new: Implement virtual IRQ injection Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 19/59] KVM: arm/arm64: vgic-new: Add IRQ sorting Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 20/59] KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` Christoffer Dall [this message]
2016-05-24  9:09   ` [PULL 21/59] KVM: arm/arm64: vgic-new: Add GICv2 world switch backend Christoffer Dall
2016-05-24  9:09 ` [PULL 22/59] KVM: arm/arm64: vgic-new: Add GICv3 " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 23/59] KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irq Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 24/59] KVM: arm/arm64: vgic-new: Add MMIO handling framework Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 25/59] KVM: arm/arm64: vgic-new: Add GICv2 " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 26/59] KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 27/59] KVM: arm/arm64: vgic-new: Add ENABLE registers handlers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 28/59] KVM: arm/arm64: vgic-new: Add PENDING " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 29/59] KVM: arm/arm64: vgic-new: Add ACTIVE " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 30/59] KVM: arm/arm64: vgic-new: Add PRIORITY " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 31/59] KVM: arm/arm64: vgic-new: Add CONFIG " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 32/59] KVM: arm/arm64: vgic-new: Add TARGET " Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 33/59] KVM: arm/arm64: vgic-new: Add SGIR register handler Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 34/59] KVM: arm/arm64: vgic-new: Add SGIPENDR register handlers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 35/59] KVM: arm/arm64: vgic-new: Add GICv3 MMIO handling framework Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 36/59] KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 37/59] KVM: arm/arm64: vgic-new: Add GICv3 redistributor IIDR and TYPER handler Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 38/59] KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handler Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 39/59] KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 40/59] KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handler Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 41/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registration Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 42/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQS Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 43/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRL Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 44/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addr Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 45/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDR Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 46/59] KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 47/59] KVM: arm/arm64: vgic-new: Export register access interface Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 48/59] KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 49/59] KVM: arm/arm64: vgic-new: Add GICH_VMCR accessors Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 50/59] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 51/59] KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 52/59] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 53/59] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 54/59] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 55/59] KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 56/59] KVM: arm/arm64: vgic-new: Wire up irqfd injection Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 57/59] KVM: arm/arm64: vgic-new: implement mapped IRQ handling Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 58/59] KVM: arm/arm64: vgic-new: enable build Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall
2016-05-24  9:09 ` [PULL 59/59] KVM: arm/arm64: vgic-new: Synchronize changes to active state Christoffer Dall
2016-05-24  9:09   ` Christoffer Dall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464080993-10884-22-git-send-email-christoffer.dall@linaro.org \
    --to=christoffer.dall@linaro.org \
    --cc=andre.przywara@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.