From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> To: rui.zhang@intel.com, edubezval@gmail.com Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, yamada.masahiro@socionext.com, masami.hiramatsu@linaro.org, jaswinder.singh@linaro.org, Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Subject: [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Date: Mon, 29 May 2017 18:15:44 +0900 [thread overview] Message-ID: <1496049345-14649-4-git-send-email-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <1496049345-14649-1-git-send-email-hayashi.kunihiko@socionext.com> Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. The thermal monitor is included in sysctrl. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 6 ++++++ 3 files changed, 48 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 373818a..89ccb88 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -70,6 +70,27 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + thermal-zones { + cpu_thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu_crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu_alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + }; }; &serial2 { diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 51a3eac..0201584 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -68,6 +68,27 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + thermal-zones { + cpu_thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu_crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu_alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + }; }; &serial2 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d..072e3b4 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -387,6 +387,12 @@ compatible = "socionext,uniphier-pxs2-reset"; #reset-cells = <1>; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs2-thermal"; + interrupts = <0 3 1>; + #thermal-sensor-cells = <0>; + }; }; }; }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: hayashi.kunihiko@socionext.com (Kunihiko Hayashi) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Date: Mon, 29 May 2017 18:15:44 +0900 [thread overview] Message-ID: <1496049345-14649-4-git-send-email-hayashi.kunihiko@socionext.com> (raw) In-Reply-To: <1496049345-14649-1-git-send-email-hayashi.kunihiko@socionext.com> Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. The thermal monitor is included in sysctrl. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> --- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/uniphier-pxs2.dtsi | 6 ++++++ 3 files changed, 48 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 373818a..89ccb88 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -70,6 +70,27 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + thermal-zones { + cpu_thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu_crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu_alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + }; }; &serial2 { diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 51a3eac..0201584 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -68,6 +68,27 @@ i2c5 = &i2c5; i2c6 = &i2c6; }; + + thermal-zones { + cpu_thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + thermal-sensors = <&pvtctl>; + + trips { + cpu_crit: cpu_crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu_alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + }; + }; }; &serial2 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index e9e031d..072e3b4 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -387,6 +387,12 @@ compatible = "socionext,uniphier-pxs2-reset"; #reset-cells = <1>; }; + + pvtctl: pvtctl { + compatible = "socionext,uniphier-pxs2-thermal"; + interrupts = <0 3 1>; + #thermal-sensor-cells = <0>; + }; }; }; }; -- 2.7.4
next prev parent reply other threads:[~2017-05-29 9:17 UTC|newest] Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-05-29 9:15 [PATCH 0/4] add UniPhier thermal support Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 9:15 ` [PATCH 1/4] thermal: uniphier: add UniPhier thermal driver Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 10:23 ` Keerthy 2017-05-29 10:23 ` Keerthy 2017-05-29 10:23 ` Keerthy 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 3:21 ` Keerthy 2017-05-30 3:21 ` Keerthy 2017-05-30 3:21 ` Keerthy 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-29 16:48 ` Eduardo Valentin 2017-05-29 16:48 ` Eduardo Valentin 2017-05-30 9:21 ` Kunihiko Hayashi 2017-05-30 9:21 ` Kunihiko Hayashi 2017-06-05 8:42 ` Masahiro Yamada 2017-06-05 8:42 ` Masahiro Yamada 2017-06-05 8:42 ` Masahiro Yamada 2017-05-29 9:15 ` [PATCH 2/4] dt-bindings: thermal: add binding documentation for UniPhier thermal monitor Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-06-05 17:28 ` Rob Herring 2017-06-05 17:28 ` Rob Herring 2017-06-06 2:46 ` Masahiro Yamada 2017-06-06 2:46 ` Masahiro Yamada 2017-05-29 9:15 ` Kunihiko Hayashi [this message] 2017-05-29 9:15 ` [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Kunihiko Hayashi 2017-05-29 16:30 ` Eduardo Valentin 2017-05-29 16:30 ` Eduardo Valentin 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-29 9:15 ` [PATCH 4/4] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-06-06 3:04 ` Masahiro Yamada 2017-06-06 3:04 ` Masahiro Yamada
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1496049345-14649-4-git-send-email-hayashi.kunihiko@socionext.com \ --to=hayashi.kunihiko@socionext.com \ --cc=devicetree@vger.kernel.org \ --cc=edubezval@gmail.com \ --cc=jaswinder.singh@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=masami.hiramatsu@linaro.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=yamada.masahiro@socionext.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.