From: Eduardo Valentin <edubezval@gmail.com> To: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: rui.zhang@intel.com, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, yamada.masahiro@socionext.com, masami.hiramatsu@linaro.org, jaswinder.singh@linaro.org Subject: Re: [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Date: Mon, 29 May 2017 09:30:09 -0700 [thread overview] Message-ID: <20170529163007.GA14413@localhost.localdomain> (raw) In-Reply-To: <1496049345-14649-4-git-send-email-hayashi.kunihiko@socionext.com> [-- Attachment #1: Type: text/plain, Size: 2790 bytes --] On Mon, May 29, 2017 at 06:15:44PM +0900, Kunihiko Hayashi wrote: > Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. > The thermal monitor is included in sysctrl. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 21 +++++++++++++++++++++ > arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 21 +++++++++++++++++++++ > arch/arm/boot/dts/uniphier-pxs2.dtsi | 6 ++++++ > 3 files changed, 48 insertions(+) > > diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > index 373818a..89ccb88 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > @@ -70,6 +70,27 @@ > i2c5 = &i2c5; > i2c6 = &i2c6; > }; > + > + thermal-zones { > + cpu_thermal { > + polling-delay-passive = <250>; /* 250ms */ > + polling-delay = <1000>; /* 1000ms */ > + thermal-sensors = <&pvtctl>; > + > + trips { > + cpu_crit: cpu_crit { > + temperature = <95000>; /* 95C */ > + hysteresis = <2000>; > + type = "critical"; > + }; > + cpu_alert: cpu_alert { > + temperature = <85000>; /* 85C */ > + hysteresis = <2000>; > + type = "passive"; > + }; > + }; These are missing cooling-maps section. > + }; > + }; > }; > > &serial2 { > diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > index 51a3eac..0201584 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > @@ -68,6 +68,27 @@ > i2c5 = &i2c5; > i2c6 = &i2c6; > }; > + > + thermal-zones { > + cpu_thermal { > + polling-delay-passive = <250>; /* 250ms */ > + polling-delay = <1000>; /* 1000ms */ > + thermal-sensors = <&pvtctl>; > + > + trips { > + cpu_crit: cpu_crit { > + temperature = <95000>; /* 95C */ > + hysteresis = <2000>; > + type = "critical"; > + }; > + cpu_alert: cpu_alert { > + temperature = <85000>; /* 85C */ > + hysteresis = <2000>; > + type = "passive"; > + }; > + }; same > + }; > + }; > }; > > &serial2 { > diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi > index e9e031d..072e3b4 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi > +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi > @@ -387,6 +387,12 @@ > compatible = "socionext,uniphier-pxs2-reset"; > #reset-cells = <1>; > }; > + > + pvtctl: pvtctl { > + compatible = "socionext,uniphier-pxs2-thermal"; > + interrupts = <0 3 1>; > + #thermal-sensor-cells = <0>; > + }; > }; > }; > }; > -- > 2.7.4 > [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: edubezval@gmail.com (Eduardo Valentin) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Date: Mon, 29 May 2017 09:30:09 -0700 [thread overview] Message-ID: <20170529163007.GA14413@localhost.localdomain> (raw) In-Reply-To: <1496049345-14649-4-git-send-email-hayashi.kunihiko@socionext.com> On Mon, May 29, 2017 at 06:15:44PM +0900, Kunihiko Hayashi wrote: > Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC. > The thermal monitor is included in sysctrl. > > Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> > --- > arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 21 +++++++++++++++++++++ > arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 21 +++++++++++++++++++++ > arch/arm/boot/dts/uniphier-pxs2.dtsi | 6 ++++++ > 3 files changed, 48 insertions(+) > > diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > index 373818a..89ccb88 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts > @@ -70,6 +70,27 @@ > i2c5 = &i2c5; > i2c6 = &i2c6; > }; > + > + thermal-zones { > + cpu_thermal { > + polling-delay-passive = <250>; /* 250ms */ > + polling-delay = <1000>; /* 1000ms */ > + thermal-sensors = <&pvtctl>; > + > + trips { > + cpu_crit: cpu_crit { > + temperature = <95000>; /* 95C */ > + hysteresis = <2000>; > + type = "critical"; > + }; > + cpu_alert: cpu_alert { > + temperature = <85000>; /* 85C */ > + hysteresis = <2000>; > + type = "passive"; > + }; > + }; These are missing cooling-maps section. > + }; > + }; > }; > > &serial2 { > diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > index 51a3eac..0201584 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts > @@ -68,6 +68,27 @@ > i2c5 = &i2c5; > i2c6 = &i2c6; > }; > + > + thermal-zones { > + cpu_thermal { > + polling-delay-passive = <250>; /* 250ms */ > + polling-delay = <1000>; /* 1000ms */ > + thermal-sensors = <&pvtctl>; > + > + trips { > + cpu_crit: cpu_crit { > + temperature = <95000>; /* 95C */ > + hysteresis = <2000>; > + type = "critical"; > + }; > + cpu_alert: cpu_alert { > + temperature = <85000>; /* 85C */ > + hysteresis = <2000>; > + type = "passive"; > + }; > + }; same > + }; > + }; > }; > > &serial2 { > diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi > index e9e031d..072e3b4 100644 > --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi > +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi > @@ -387,6 +387,12 @@ > compatible = "socionext,uniphier-pxs2-reset"; > #reset-cells = <1>; > }; > + > + pvtctl: pvtctl { > + compatible = "socionext,uniphier-pxs2-thermal"; > + interrupts = <0 3 1>; > + #thermal-sensor-cells = <0>; > + }; > }; > }; > }; > -- > 2.7.4 > -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170529/ea25df8e/attachment.sig>
next prev parent reply other threads:[~2017-05-29 16:30 UTC|newest] Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-05-29 9:15 [PATCH 0/4] add UniPhier thermal support Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 9:15 ` [PATCH 1/4] thermal: uniphier: add UniPhier thermal driver Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 10:23 ` Keerthy 2017-05-29 10:23 ` Keerthy 2017-05-29 10:23 ` Keerthy 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 2:47 ` Kunihiko Hayashi 2017-05-30 3:21 ` Keerthy 2017-05-30 3:21 ` Keerthy 2017-05-30 3:21 ` Keerthy 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-30 4:09 ` Kunihiko Hayashi 2017-05-29 16:48 ` Eduardo Valentin 2017-05-29 16:48 ` Eduardo Valentin 2017-05-30 9:21 ` Kunihiko Hayashi 2017-05-30 9:21 ` Kunihiko Hayashi 2017-06-05 8:42 ` Masahiro Yamada 2017-06-05 8:42 ` Masahiro Yamada 2017-06-05 8:42 ` Masahiro Yamada 2017-05-29 9:15 ` [PATCH 2/4] dt-bindings: thermal: add binding documentation for UniPhier thermal monitor Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-06-05 17:28 ` Rob Herring 2017-06-05 17:28 ` Rob Herring 2017-06-06 2:46 ` Masahiro Yamada 2017-06-06 2:46 ` Masahiro Yamada 2017-05-29 9:15 ` [PATCH 3/4] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2 Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-05-29 16:30 ` Eduardo Valentin [this message] 2017-05-29 16:30 ` Eduardo Valentin 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-30 9:25 ` Kunihiko Hayashi 2017-05-29 9:15 ` [PATCH 4/4] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 Kunihiko Hayashi 2017-05-29 9:15 ` Kunihiko Hayashi 2017-06-06 3:04 ` Masahiro Yamada 2017-06-06 3:04 ` Masahiro Yamada
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170529163007.GA14413@localhost.localdomain \ --to=edubezval@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=hayashi.kunihiko@socionext.com \ --cc=jaswinder.singh@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=masami.hiramatsu@linaro.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=yamada.masahiro@socionext.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.