All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	<benjamin.gaignard@linaro.org>,
	Gerald Baeza <gerald.baeza@st.com>,
	Loic Pallardy <loic.pallardy@st.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-mmc@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check
Date: Fri, 21 Sep 2018 11:46:11 +0200	[thread overview]
Message-ID: <1537523181-14578-18-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

All variants don't pretend to have a startbiterr.
-While data error check, if status register return an error
(like  MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR
(if not desired).
-expand start_err to MCI_IRQENABLE to avoid to set this bit by default.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c | 27 ++++++++++++++++-----------
 drivers/mmc/host/mmci.h |  6 +++---
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e2272c7..53f613f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1014,14 +1014,18 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
+	unsigned int status_err;
+
 	/* Make sure we have data to handle */
 	if (!data)
 		return;
 
 	/* First check for errors */
-	if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
-		      host->variant->start_err |
-		      MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
+	status_err = status & (host->variant->start_err |
+			       MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+			       MCI_TXUNDERRUN | MCI_RXOVERRUN);
+
+	if (status_err) {
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
@@ -1038,18 +1042,18 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		success = data->blksz * data->blocks - remain;
 
 		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
-			status, success);
-		if (status & MCI_DATACRCFAIL) {
+			status_err, success);
+		if (status_err & MCI_DATACRCFAIL) {
 			/* Last block was not successful */
 			success -= 1;
 			data->error = -EILSEQ;
-		} else if (status & MCI_DATATIMEOUT) {
+		} else if (status_err & MCI_DATATIMEOUT) {
 			data->error = -ETIMEDOUT;
-		} else if (status & MCI_STARTBITERR) {
+		} else if (status_err & MCI_STARTBITERR) {
 			data->error = -ECOMM;
-		} else if (status & MCI_TXUNDERRUN) {
+		} else if (status_err & MCI_TXUNDERRUN) {
 			data->error = -EIO;
-		} else if (status & MCI_RXOVERRUN) {
+		} else if (status_err & MCI_RXOVERRUN) {
 			if (success > host->variant->fifosize)
 				success -= host->variant->fifosize;
 			else
@@ -1911,7 +1915,7 @@ static int mmci_probe(struct amba_device *dev,
 			goto clk_disable;
 	}
 
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | variant->start_err, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
 
@@ -2000,7 +2004,8 @@ static void mmci_restore(struct mmci_host *host)
 		writel(host->datactrl_reg, host->base + MMCIDATACTRL);
 		writel(host->pwr_reg, host->base + MMCIPOWER);
 	}
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | host->variant->start_err,
+	       host->base + MMCIMASK0);
 	mmci_reg_delay(host);
 
 	spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 46c8862..fcb332d 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -181,9 +181,9 @@
 #define MMCIFIFO		0x080 /* to 0x0bc */
 
 #define MCI_IRQENABLE	\
-	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
-	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
-	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+	(MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
+	MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK |	\
+	MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
 
 /* These interrupts are directed to IRQ1 when two IRQ lines are available */
 #define MCI_IRQ1MASK \
-- 
2.7.4


WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	benjamin.gaignard@linaro.org, Gerald Baeza <gerald.baeza@st.com>,
	Loic Pallardy <loic.pallardy@st.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-mmc@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check
Date: Fri, 21 Sep 2018 11:46:11 +0200	[thread overview]
Message-ID: <1537523181-14578-18-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

All variants don't pretend to have a startbiterr.
-While data error check, if status register return an error
(like  MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR
(if not desired).
-expand start_err to MCI_IRQENABLE to avoid to set this bit by default.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c | 27 ++++++++++++++++-----------
 drivers/mmc/host/mmci.h |  6 +++---
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e2272c7..53f613f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1014,14 +1014,18 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
+	unsigned int status_err;
+
 	/* Make sure we have data to handle */
 	if (!data)
 		return;
 
 	/* First check for errors */
-	if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
-		      host->variant->start_err |
-		      MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
+	status_err = status & (host->variant->start_err |
+			       MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+			       MCI_TXUNDERRUN | MCI_RXOVERRUN);
+
+	if (status_err) {
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
@@ -1038,18 +1042,18 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		success = data->blksz * data->blocks - remain;
 
 		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
-			status, success);
-		if (status & MCI_DATACRCFAIL) {
+			status_err, success);
+		if (status_err & MCI_DATACRCFAIL) {
 			/* Last block was not successful */
 			success -= 1;
 			data->error = -EILSEQ;
-		} else if (status & MCI_DATATIMEOUT) {
+		} else if (status_err & MCI_DATATIMEOUT) {
 			data->error = -ETIMEDOUT;
-		} else if (status & MCI_STARTBITERR) {
+		} else if (status_err & MCI_STARTBITERR) {
 			data->error = -ECOMM;
-		} else if (status & MCI_TXUNDERRUN) {
+		} else if (status_err & MCI_TXUNDERRUN) {
 			data->error = -EIO;
-		} else if (status & MCI_RXOVERRUN) {
+		} else if (status_err & MCI_RXOVERRUN) {
 			if (success > host->variant->fifosize)
 				success -= host->variant->fifosize;
 			else
@@ -1911,7 +1915,7 @@ static int mmci_probe(struct amba_device *dev,
 			goto clk_disable;
 	}
 
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | variant->start_err, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
 
@@ -2000,7 +2004,8 @@ static void mmci_restore(struct mmci_host *host)
 		writel(host->datactrl_reg, host->base + MMCIDATACTRL);
 		writel(host->pwr_reg, host->base + MMCIPOWER);
 	}
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | host->variant->start_err,
+	       host->base + MMCIMASK0);
 	mmci_reg_delay(host);
 
 	spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 46c8862..fcb332d 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -181,9 +181,9 @@
 #define MMCIFIFO		0x080 /* to 0x0bc */
 
 #define MCI_IRQENABLE	\
-	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
-	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
-	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+	(MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
+	MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK |	\
+	MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
 
 /* These interrupts are directed to IRQ1 when two IRQ lines are available */
 #define MCI_IRQ1MASK \
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: ludovic.Barre@st.com (Ludovic Barre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check
Date: Fri, 21 Sep 2018 11:46:11 +0200	[thread overview]
Message-ID: <1537523181-14578-18-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1537523181-14578-1-git-send-email-ludovic.Barre@st.com>

From: Ludovic Barre <ludovic.barre@st.com>

All variants don't pretend to have a startbiterr.
-While data error check, if status register return an error
(like  MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR
(if not desired).
-expand start_err to MCI_IRQENABLE to avoid to set this bit by default.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/mmc/host/mmci.c | 27 ++++++++++++++++-----------
 drivers/mmc/host/mmci.h |  6 +++---
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e2272c7..53f613f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1014,14 +1014,18 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
+	unsigned int status_err;
+
 	/* Make sure we have data to handle */
 	if (!data)
 		return;
 
 	/* First check for errors */
-	if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
-		      host->variant->start_err |
-		      MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
+	status_err = status & (host->variant->start_err |
+			       MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+			       MCI_TXUNDERRUN | MCI_RXOVERRUN);
+
+	if (status_err) {
 		u32 remain, success;
 
 		/* Terminate the DMA transfer */
@@ -1038,18 +1042,18 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		success = data->blksz * data->blocks - remain;
 
 		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
-			status, success);
-		if (status & MCI_DATACRCFAIL) {
+			status_err, success);
+		if (status_err & MCI_DATACRCFAIL) {
 			/* Last block was not successful */
 			success -= 1;
 			data->error = -EILSEQ;
-		} else if (status & MCI_DATATIMEOUT) {
+		} else if (status_err & MCI_DATATIMEOUT) {
 			data->error = -ETIMEDOUT;
-		} else if (status & MCI_STARTBITERR) {
+		} else if (status_err & MCI_STARTBITERR) {
 			data->error = -ECOMM;
-		} else if (status & MCI_TXUNDERRUN) {
+		} else if (status_err & MCI_TXUNDERRUN) {
 			data->error = -EIO;
-		} else if (status & MCI_RXOVERRUN) {
+		} else if (status_err & MCI_RXOVERRUN) {
 			if (success > host->variant->fifosize)
 				success -= host->variant->fifosize;
 			else
@@ -1911,7 +1915,7 @@ static int mmci_probe(struct amba_device *dev,
 			goto clk_disable;
 	}
 
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | variant->start_err, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
 
@@ -2000,7 +2004,8 @@ static void mmci_restore(struct mmci_host *host)
 		writel(host->datactrl_reg, host->base + MMCIDATACTRL);
 		writel(host->pwr_reg, host->base + MMCIPOWER);
 	}
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE | host->variant->start_err,
+	       host->base + MMCIMASK0);
 	mmci_reg_delay(host);
 
 	spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 46c8862..fcb332d 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -181,9 +181,9 @@
 #define MMCIFIFO		0x080 /* to 0x0bc */
 
 #define MCI_IRQENABLE	\
-	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
-	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
-	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+	(MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
+	MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK |	\
+	MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
 
 /* These interrupts are directed to IRQ1 when two IRQ lines are available */
 #define MCI_IRQ1MASK \
-- 
2.7.4

  parent reply	other threads:[~2018-09-21  9:47 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  9:45 [PATCH V2 00/27] mmc: mmci: add sdmmc variant for stm32 Ludovic Barre
2018-09-21  9:45 ` Ludovic Barre
2018-09-21  9:45 ` Ludovic Barre
2018-09-21  9:45 ` [PATCH V2 01/27] mmc: mmci: internalize dma map/unmap into mmci dma functions Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-26 23:49   ` Ulf Hansson
2018-09-26 23:49     ` Ulf Hansson
2018-09-21  9:45 ` [PATCH V2 02/27] mmc: mmci: internalize dma_inprogress " Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-26 23:49   ` Ulf Hansson
2018-09-26 23:49     ` Ulf Hansson
2018-09-21  9:45 ` [PATCH V2 03/27] mmc: mmci: convert dma_setup callback to return an int Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 14:28   ` Ulf Hansson
2018-09-24 14:28     ` Ulf Hansson
2018-09-24 16:12     ` Ludovic BARRE
2018-09-24 16:12       ` Ludovic BARRE
2018-09-24 16:12       ` Ludovic BARRE
2018-09-26 23:49       ` Ulf Hansson
2018-09-26 23:49         ` Ulf Hansson
2018-09-27  8:55     ` Srinivas Kandagatla
2018-09-27  8:55       ` Srinivas Kandagatla
2018-09-21  9:45 ` [PATCH V2 04/27] mmc: mmci: introduce dma_priv pointer to mmci_host Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 18:52   ` Ulf Hansson
2018-09-24 18:52     ` Ulf Hansson
2018-09-25  7:19     ` Ludovic BARRE
2018-09-25  7:19       ` Ludovic BARRE
2018-09-25  7:19       ` Ludovic BARRE
2018-09-21  9:45 ` [PATCH V2 05/27] mmc: mmci: move mmci next cookie to mci host Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-21  9:45   ` Ludovic Barre
2018-09-24 18:46   ` Ulf Hansson
2018-09-24 18:46     ` Ulf Hansson
2018-09-25  7:08     ` Ludovic BARRE
2018-09-25  7:08       ` Ludovic BARRE
2018-09-25  7:08       ` Ludovic BARRE
2018-09-21  9:46 ` [PATCH V2 06/27] mmc: mmci: merge prepare data functions Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 07/27] mmc: mmci: add prepare/unprepare_data callbacks Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 08/27] mmc: mmci: add get_next_data callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 09/27] mmc: mmci: modify dma_setup callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-10-01  9:43     ` Ludovic BARRE
2018-10-01  9:43       ` Ludovic BARRE
2018-10-01  9:43       ` Ludovic BARRE
2018-09-21  9:46 ` [PATCH V2 10/27] mmc: mmci: add dma_release callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 11/27] mmc: mmci: add dma_start callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 12/27] mmc: mmci: add dma_finalize callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 13/27] mmc: mmci: add dma_error callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 14/27] mmc: mmci: add validate_data callback Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 15/27] mmc: mmci: add set_clk/pwrreg callbacks Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 16/27] mmc: mmci: add datactrl block size variant property Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` Ludovic Barre [this message]
2018-09-21  9:46   ` [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 18/27] mmc: mmci: add variant properties to define cpsm & cmdresp bits Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 19/27] mmc: mmci: add variant property to define dpsm bit Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 20/27] mmc: mmci: add variant property to define irq pio mask Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 21/27] mmc: mmci: add variant property to write datactrl before command Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 22/27] mmc: mmci: add variant property to not read datacnt Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 23/27] mmc: mmci: add variant property to request a reset Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-10-01 12:16     ` Ludovic BARRE
2018-10-01 12:16       ` Ludovic BARRE
2018-10-01 12:16       ` Ludovic BARRE
2018-10-01 13:43       ` Ulf Hansson
2018-10-01 13:43         ` Ulf Hansson
2018-09-21  9:46 ` [PATCH V2 24/27] mmc: mmci: add clock divider for stm32 sdmmc Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 25/27] mmc: mmci: add stm32 sdmmc registers Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46 ` [PATCH V2 26/27] mmc: mmci: add DT bindings for STM32 sdmmc Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-25 15:27   ` Rob Herring
2018-09-25 15:27     ` Rob Herring
2018-10-01  9:30   ` Ulf Hansson
2018-10-01  9:30     ` Ulf Hansson
2018-09-21  9:46 ` [PATCH V2 27/27] mmc: mmci: add stm32 sdmmc variant Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-09-21  9:46   ` Ludovic Barre
2018-10-01  9:31   ` Ulf Hansson
2018-10-01  9:31     ` Ulf Hansson
2018-10-01 12:56     ` Ludovic BARRE
2018-10-01 12:56       ` Ludovic BARRE
2018-10-01 12:56       ` Ludovic BARRE
2018-10-01 13:39       ` Ulf Hansson
2018-10-01 13:39         ` Ulf Hansson
2018-10-01 13:53         ` Ludovic BARRE
2018-10-01 13:53           ` Ludovic BARRE
2018-10-01 13:53           ` Ludovic BARRE
  -- strict thread matches above, loose matches on Subject: below --
2018-09-18 10:55 [PATCH V2 00/27] mmc: mmci: add sdmmc variant for stm32 Ludovic Barre
2018-09-18 10:55 ` [PATCH V2 17/27] mmc: mmci: expand startbiterr to irqmask and error check Ludovic Barre
2018-09-18 10:55   ` Ludovic Barre
2018-09-18 10:55   ` Ludovic Barre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537523181-14578-18-git-send-email-ludovic.Barre@st.com \
    --to=ludovic.barre@st.com \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gerald.baeza@st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=loic.pallardy@st.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.