From: Pablo Greco <pgreco@centosproject.org>
To: linux-sunxi@googlegroups.com
Cc: Pablo Greco <pgreco@centosproject.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 0/7] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra
Date: Thu, 18 Apr 2019 12:11:15 -0300 [thread overview]
Message-ID: <1555600282-9405-1-git-send-email-pgreco@centosproject.org> (raw)
BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
software compatible.
Changes include:
- 2GiB -> 1GiB
- no eMMC
- no onboard microphone
- no IR
- no blue LED
- no charging (and power jack to USB)
- dropped USB2 and connect USB1 to a 4-port HUB.
Changes in v4:
- Went back to v2
- Added GPIO pin-bank regulators (both m2-ultra and m2-berry)
Changes in v3:
- Removed "Sort device node dereferences" (already applied)
- Added basic pio node
- Tied GMAC regulators to the pio (both m2-ultra and m2-berry)
Changes in v2:
- Split into smaller patches
Pablo Greco (7):
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet
controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Fix WiFi regulator
definitions
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator
supplies
ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator
supplies
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 ++
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 124 ++++++++++++++++++++++
2 files changed, 130 insertions(+)
--
1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Pablo Greco <pgreco@centosproject.org>
To: linux-sunxi@googlegroups.com
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Maxime Ripard <maxime.ripard@bootlin.com>,
Pablo Greco <pgreco@centosproject.org>,
linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/7] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra
Date: Thu, 18 Apr 2019 12:11:15 -0300 [thread overview]
Message-ID: <1555600282-9405-1-git-send-email-pgreco@centosproject.org> (raw)
BPi M2 Berry is a trimmed down version of the BPi M2 Ultra, completely
software compatible.
Changes include:
- 2GiB -> 1GiB
- no eMMC
- no onboard microphone
- no IR
- no blue LED
- no charging (and power jack to USB)
- dropped USB2 and connect USB1 to a 4-port HUB.
Changes in v4:
- Went back to v2
- Added GPIO pin-bank regulators (both m2-ultra and m2-berry)
Changes in v3:
- Removed "Sort device node dereferences" (already applied)
- Added basic pio node
- Tied GMAC regulators to the pio (both m2-ultra and m2-berry)
Changes in v2:
- Split into smaller patches
Pablo Greco (7):
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet
controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Fix WiFi regulator
definitions
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator
supplies
ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator
supplies
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 6 ++
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 124 ++++++++++++++++++++++
2 files changed, 130 insertions(+)
--
1.8.3.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-04-18 15:11 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-18 15:11 Pablo Greco [this message]
2019-04-18 15:11 ` [PATCH v4 0/7] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra Pablo Greco
2019-04-18 15:11 ` [PATCH v4 1/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:55 ` Maxime Ripard
2019-04-18 15:55 ` Maxime Ripard
2019-04-18 15:55 ` Maxime Ripard
2019-04-18 15:11 ` [PATCH v4 2/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` [PATCH v4 3/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` [PATCH v4 4/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Fix WiFi regulator definitions Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` [PATCH v4 5/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:56 ` Maxime Ripard
2019-04-18 15:56 ` Maxime Ripard
2019-04-18 15:56 ` Maxime Ripard
2019-04-18 16:14 ` Pablo Sebastián Greco
2019-04-18 16:14 ` Pablo Sebastián Greco
2019-04-23 16:12 ` Maxime Ripard
2019-04-23 16:12 ` Maxime Ripard
2019-04-18 15:11 ` [PATCH v4 6/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:11 ` Pablo Greco
2019-04-18 15:54 ` Maxime Ripard
2019-04-18 15:54 ` Maxime Ripard
2019-04-18 15:54 ` Maxime Ripard
2019-04-18 15:11 ` [PATCH v4 7/7] ARM: dts: sun8i: r40: bananapi-m2-ultra: " Pablo Greco
2019-04-18 15:11 ` Pablo Greco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1555600282-9405-1-git-send-email-pgreco@centosproject.org \
--to=pgreco@centosproject.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.