From: Pablo Greco <pgreco@centosproject.org> To: linux-sunxi@googlegroups.com Cc: Pablo Greco <pgreco@centosproject.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <maxime.ripard@bootlin.com>, Chen-Yu Tsai <wens@csie.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v4 2/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output Date: Thu, 18 Apr 2019 12:11:17 -0300 [thread overview] Message-ID: <1555600282-9405-3-git-send-email-pgreco@centosproject.org> (raw) In-Reply-To: <1555600282-9405-1-git-send-email-pgreco@centosproject.org> This patch adds the hdmi nodes to the Bananapi M2 Berry, the same way it was done to the Bananapi M2 Ultra Signed-off-by: Pablo Greco <pgreco@centosproject.org> --- arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index 0d79e91..2a5b80b 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -88,6 +99,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; @@ -109,6 +124,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -200,6 +225,10 @@ regulator-name = "vcc-wifi"; }; +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; -- 1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Pablo Greco <pgreco@centosproject.org> To: linux-sunxi@googlegroups.com Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Maxime Ripard <maxime.ripard@bootlin.com>, Pablo Greco <pgreco@centosproject.org>, linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output Date: Thu, 18 Apr 2019 12:11:17 -0300 [thread overview] Message-ID: <1555600282-9405-3-git-send-email-pgreco@centosproject.org> (raw) In-Reply-To: <1555600282-9405-1-git-send-email-pgreco@centosproject.org> This patch adds the hdmi nodes to the Bananapi M2 Berry, the same way it was done to the Bananapi M2 Ultra Signed-off-by: Pablo Greco <pgreco@centosproject.org> --- arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index 0d79e91..2a5b80b 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -88,6 +99,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; @@ -109,6 +124,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -200,6 +225,10 @@ regulator-name = "vcc-wifi"; }; +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; -- 1.8.3.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-18 15:12 UTC|newest] Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-18 15:11 [PATCH v4 0/7] ARM: dts: sun8i: v40 Rewrite BPi M2 Berry DTS based on BPi M2 Ultra Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` [PATCH v4 1/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:55 ` Maxime Ripard 2019-04-18 15:55 ` Maxime Ripard 2019-04-18 15:55 ` Maxime Ripard 2019-04-18 15:11 ` Pablo Greco [this message] 2019-04-18 15:11 ` [PATCH v4 2/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output Pablo Greco 2019-04-18 15:11 ` [PATCH v4 3/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` [PATCH v4 4/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Fix WiFi regulator definitions Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` [PATCH v4 5/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:56 ` Maxime Ripard 2019-04-18 15:56 ` Maxime Ripard 2019-04-18 15:56 ` Maxime Ripard 2019-04-18 16:14 ` Pablo Sebastián Greco 2019-04-18 16:14 ` Pablo Sebastián Greco 2019-04-23 16:12 ` Maxime Ripard 2019-04-23 16:12 ` Maxime Ripard 2019-04-18 15:11 ` [PATCH v4 6/7] ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:11 ` Pablo Greco 2019-04-18 15:54 ` Maxime Ripard 2019-04-18 15:54 ` Maxime Ripard 2019-04-18 15:54 ` Maxime Ripard 2019-04-18 15:11 ` [PATCH v4 7/7] ARM: dts: sun8i: r40: bananapi-m2-ultra: " Pablo Greco 2019-04-18 15:11 ` Pablo Greco
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1555600282-9405-3-git-send-email-pgreco@centosproject.org \ --to=pgreco@centosproject.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mark.rutland@arm.com \ --cc=maxime.ripard@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.