All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
	Simon Horman <horms@verge.net.au>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	sam@ravnborg.org
Subject: [PATCH v3 7/8] [HACK] arm64: dts: renesas: draak: Enable LVDS
Date: Wed, 28 Aug 2019 19:36:41 +0100	[thread overview]
Message-ID: <1567017402-5895-8-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1567017402-5895-1-git-send-email-fabrizio.castro@bp.renesas.com>

Enable and connect the second LVDS encoder to the second LVDS input of
the THC63LVD1024 for dual-link LVDS operation. This requires changing
the default settings of SW45 and SW47 to OFF and ON respectively.

This patch is based on Laurent's dual-LVDS work:
https://patchwork.kernel.org/patch/10965045/

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
v2->v3:
* new patch

Geert,

no need to review this patch unless they like the idea behind this
series.

Thanks,
Fab

---
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index b38f9d4..38b9c5a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -87,11 +87,20 @@
 
 			port@0 {
 				reg = <0>;
-				thc63lvd1024_in: endpoint {
+				dual-lvds-even-pixels;
+				thc63lvd1024_in0: endpoint {
 					remote-endpoint = <&lvds0_out>;
 				};
 			};
 
+			port@1 {
+				reg = <1>;
+				dual-lvds-odd-pixels;
+				thc63lvd1024_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+
 			port@2 {
 				reg = <2>;
 				thc63lvd1024_out: endpoint {
@@ -489,7 +498,7 @@
 	ports {
 		port@1 {
 			lvds0_out: endpoint {
-				remote-endpoint = <&thc63lvd1024_in>;
+				remote-endpoint = <&thc63lvd1024_in0>;
 			};
 		};
 	};
@@ -507,6 +516,14 @@
 		 <&x13_clk>,
 		 <&extal_clk>;
 	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in1>;
+			};
+		};
+	};
 };
 
 &ohci0 {
-- 
2.7.4


  parent reply	other threads:[~2019-08-28 18:37 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28 18:36 [PATCH v3 0/8] Add dual-LVDS panel support to EK874 Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings Fabrizio Castro
2019-08-29  7:57   ` Geert Uytterhoeven
2019-08-29  7:57     ` Geert Uytterhoeven
2019-08-29  9:14     ` Fabrizio Castro
2019-08-29  9:14       ` Fabrizio Castro
2019-08-29 14:03   ` Rob Herring
2019-08-29 14:03     ` Rob Herring
2019-08-29 14:38     ` Fabrizio Castro
2019-08-29 14:38       ` Fabrizio Castro
2019-11-07 18:00       ` Laurent Pinchart
2019-11-07 18:00         ` Laurent Pinchart
2019-11-07 18:00         ` Laurent Pinchart
2019-12-06 15:11         ` Fabrizio Castro
2019-12-06 15:11           ` Fabrizio Castro
2019-12-06 15:10     ` Fabrizio Castro
2019-12-06 15:10       ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 2/8] dt-bindings: display: Add idk-2121wr binding Fabrizio Castro
2019-11-07 18:12   ` Laurent Pinchart
2019-11-07 18:12     ` Laurent Pinchart
2019-12-06 15:17     ` Fabrizio Castro
2019-12-06 15:17       ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 3/8] drm: Add bus timings helper Fabrizio Castro
2019-11-07 19:26   ` Laurent Pinchart
2019-11-07 19:26     ` Laurent Pinchart
2019-11-07 19:30     ` Daniel Vetter
2019-11-07 19:30       ` Daniel Vetter
2019-12-06 15:25       ` Fabrizio Castro
2019-12-06 15:25         ` Fabrizio Castro
2019-12-06 15:24     ` Fabrizio Castro
2019-12-06 15:24       ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 4/8] drm: rcar-du: lvds: Add dual-LVDS panels support Fabrizio Castro
2019-11-07 19:50   ` Laurent Pinchart
2019-11-07 19:50     ` Laurent Pinchart
2019-12-06 15:35     ` Fabrizio Castro
2019-12-06 15:35       ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 5/8] drm: bridge: thc63: Do not report input bus mode through bridge timings Fabrizio Castro
2019-11-07 19:52   ` Laurent Pinchart
2019-11-07 19:52     ` Laurent Pinchart
2019-12-06 15:38     ` Fabrizio Castro
2019-12-06 15:38       ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 6/8] arm64: dts: renesas: Add EK874 board with idk-2121wr display support Fabrizio Castro
2019-11-07 19:55   ` Laurent Pinchart
2019-08-28 18:36 ` Fabrizio Castro [this message]
2019-11-07 19:57   ` [PATCH v3 7/8] [HACK] arm64: dts: renesas: draak: Enable LVDS Laurent Pinchart
2019-12-06 15:40     ` Fabrizio Castro
2019-08-28 18:36 ` [PATCH v3 8/8] [HACK] arm64: dts: renesas: draak: Enable LVDS dual-link operation Fabrizio Castro
2019-08-29 15:26 ` [PATCH v3 0/8] Add dual-LVDS panel support to EK874 Rob Herring
2019-08-29 15:26   ` Rob Herring
2019-09-02 10:01   ` Fabrizio Castro
2019-09-02 10:01     ` Fabrizio Castro
2019-10-22 16:30 ` Fabrizio Castro
2019-10-22 16:30   ` Fabrizio Castro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1567017402-5895-8-git-send-email-fabrizio.castro@bp.renesas.com \
    --to=fabrizio.castro@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.