From: biju.das@bp.renesas.com (Biju Das)
To: cip-dev@lists.cip-project.org
Subject: [cip-dev] [PATCH 4.19.y-cip 00/12] Renesas RZ/G2N extend peripheral support
Date: Wed, 29 Jan 2020 14:29:53 +0000 [thread overview]
Message-ID: <1580308205-20435-1-git-send-email-biju.das@bp.renesas.com> (raw)
This patch series adds support for following peripherals supported by RZ
G2N,
1: SDHI
2: Watchdog
3: MSIOF
4: PCIE
Please note this patch series is based on top of the series [1].
[1] https://patchwork.kernel.org/project/cip-dev/list/?series=233689&submitter=&state=*&q=&archive=both&delegate=
Biju Das (3):
mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
arm64: dts: renesas: r8a774b1: Add SDHI support
arm64: dts: renesas: r8a774b1-hihope-rzg2n: Enable HS400 mode
Fabrizio Castro (7):
dt-bindings: spi: sh-msiof: Add r8a774b1 support
dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support
arm64: dts: renesas: r8a774b1: Add RWDT node
arm64: dts: renesas: r8a774b1: Add all MSIOF nodes
arm64: dts: renesas: r8a774b1: Add PCIe device nodes
arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide
about pciec1
arm64: dts: renesas: r8a774b1: Add INTC-EX device node
Lad Prabhakar (1):
dt-bindings: mmc: renesas_sdhi: Add r8a774b1 support
Simon Horman (1):
dt-bindings: watchdog: Rename bindings documentation file
Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 1 +
Documentation/devicetree/bindings/spi/sh-msiof.txt | 1 +
.../devicetree/bindings/watchdog/renesas,wdt.txt | 46 ++++++
.../devicetree/bindings/watchdog/renesas-wdt.txt | 45 ------
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 4 -
.../boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts | 4 +
.../boot/dts/renesas/r8a774b1-hihope-rzg2n.dts | 4 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 163 ++++++++++++++++++++-
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 1 +
9 files changed, 213 insertions(+), 56 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
delete mode 100644 Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
--
2.7.4
next reply other threads:[~2020-01-29 14:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 14:29 Biju Das [this message]
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 01/12] dt-bindings: spi: sh-msiof: Add r8a774b1 support Biju Das
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 02/12] dt-bindings: watchdog: Rename bindings documentation file Biju Das
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 03/12] dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support Biju Das
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 04/12] arm64: dts: renesas: r8a774b1: Add RWDT node Biju Das
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 05/12] arm64: dts: renesas: r8a774b1: Add all MSIOF nodes Biju Das
2020-01-30 19:26 ` Pavel Machek
2020-01-30 22:22 ` Prabhakar Mahadev Lad
2020-02-02 18:01 ` Pavel Machek
2020-02-03 8:27 ` Chris Paterson
2020-01-29 14:29 ` [cip-dev] [PATCH 4.19.y-cip 06/12] arm64: dts: renesas: r8a774b1: Add PCIe device nodes Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 07/12] arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1 Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 08/12] arm64: dts: renesas: r8a774b1: Add INTC-EX device node Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 09/12] dt-bindings: mmc: renesas_sdhi: Add r8a774b1 support Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 10/12] mmc: renesas_sdhi_internal_dmac: " Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 11/12] arm64: dts: renesas: r8a774b1: Add SDHI support Biju Das
2020-01-29 14:30 ` [cip-dev] [PATCH 4.19.y-cip 12/12] arm64: dts: renesas: r8a774b1-hihope-rzg2n: Enable HS400 mode Biju Das
2020-01-30 22:45 ` [cip-dev] [PATCH 4.19.y-cip 00/12] Renesas RZ/G2N extend peripheral support Pavel Machek
2020-01-31 3:54 ` nobuhiro1.iwamatsu at toshiba.co.jp
2020-01-31 8:49 ` Prabhakar Mahadev Lad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1580308205-20435-1-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.