From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Subject: [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space
Date: Fri, 16 Oct 2009 16:40:04 -0700 [thread overview]
Message-ID: <20091016233624.2463.26653.stgit@localhost> (raw)
Hi all,
This series intended for the merge window after 2.6.32 removes
OMAP2_IO_ADDRESS to reclaim more address space.
OMAP2_IO_ADDRESS is replaced with ioremap where possible, and
the remaining usage is split into OMAP2_L3_IO_ADDRESS and
OMAP2_L4_IO_ADDRESS.
Some usage still remains in *.S files and headers. Eventually we should
be able to remove the usage and only define it locally.
Note that after this series omap4 no longer uses these macros.
Other omaps will need more work still.
Regards,
Tony
---
Santosh Shilimkar (5):
omap: Add OMAP4 L3 and L4 peripherals.
omap: Fix DEBUG_LL UART io address
omap: Move SRAM map to claim more io space
omap: Remap L3, L4 to get more kernel io address space
omap: Split OMAP2_IO_ADDRESS to L3 and L4
Tony Lindgren (9):
omap: Use ioremap in dispc.c
omap: Use ioremap for omap4 L4 code
omap: Use getnstimeofday for omap_device
omap: Use ioremap in omap_hwmod.c
omap: Use ioremap in gpio.c
omap: Use ioremap in dmtimer.c
omap: Use ioremap in dma.c
omap: Use ioremap in irq.c
omap: Change low-level serial init to use ioremap
arch/arm/mach-omap1/serial.c | 11 +
arch/arm/mach-omap2/board-2430sdp.c | 2
arch/arm/mach-omap2/board-3430sdp.c | 2
arch/arm/mach-omap2/board-4430sdp.c | 15 +-
arch/arm/mach-omap2/board-apollon.c | 2
arch/arm/mach-omap2/board-generic.c | 2
arch/arm/mach-omap2/board-h4.c | 2
arch/arm/mach-omap2/board-ldp.c | 2
arch/arm/mach-omap2/board-n8x0.c | 6 -
arch/arm/mach-omap2/board-omap3beagle.c | 2
arch/arm/mach-omap2/board-omap3evm.c | 2
arch/arm/mach-omap2/board-omap3pandora.c | 2
arch/arm/mach-omap2/board-overo.c | 2
arch/arm/mach-omap2/board-rx51.c | 2
arch/arm/mach-omap2/board-zoom2.c | 2
arch/arm/mach-omap2/cm.h | 6 -
arch/arm/mach-omap2/io.c | 18 ++
arch/arm/mach-omap2/irq.c | 12 +
arch/arm/mach-omap2/omap-smp.c | 28 ++-
arch/arm/mach-omap2/omap_hwmod.c | 18 +-
arch/arm/mach-omap2/pm-debug.c | 3
arch/arm/mach-omap2/prm.h | 6 -
arch/arm/mach-omap2/sdrc.h | 9 +
arch/arm/mach-omap2/serial.c | 15 +-
arch/arm/mach-omap2/sram242x.S | 4
arch/arm/mach-omap2/sram243x.S | 4
arch/arm/mach-omap2/timer-gp.c | 3
arch/arm/plat-omap/common.c | 44 ++---
arch/arm/plat-omap/dma.c | 34 +++-
arch/arm/plat-omap/dmtimer.c | 16 +-
arch/arm/plat-omap/gpio.c | 222 ++++++++++++++-----------
arch/arm/plat-omap/include/mach/control.h | 15 +-
arch/arm/plat-omap/include/mach/debug-macro.S | 4
arch/arm/plat-omap/include/mach/entry-macro.S | 6 -
arch/arm/plat-omap/include/mach/io.h | 124 ++++++++++----
arch/arm/plat-omap/include/mach/omap44xx.h | 8 -
arch/arm/plat-omap/include/mach/sdrc.h | 6 -
arch/arm/plat-omap/include/mach/vmalloc.h | 2
arch/arm/plat-omap/io.c | 20 ++
arch/arm/plat-omap/omap_device.c | 50 ++----
arch/arm/plat-omap/sram.c | 24 +--
drivers/video/omap/dispc.c | 20 ++
42 files changed, 479 insertions(+), 298 deletions(-)
--
Signature
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space
Date: Fri, 16 Oct 2009 16:40:04 -0700 [thread overview]
Message-ID: <20091016233624.2463.26653.stgit@localhost> (raw)
Hi all,
This series intended for the merge window after 2.6.32 removes
OMAP2_IO_ADDRESS to reclaim more address space.
OMAP2_IO_ADDRESS is replaced with ioremap where possible, and
the remaining usage is split into OMAP2_L3_IO_ADDRESS and
OMAP2_L4_IO_ADDRESS.
Some usage still remains in *.S files and headers. Eventually we should
be able to remove the usage and only define it locally.
Note that after this series omap4 no longer uses these macros.
Other omaps will need more work still.
Regards,
Tony
---
Santosh Shilimkar (5):
omap: Add OMAP4 L3 and L4 peripherals.
omap: Fix DEBUG_LL UART io address
omap: Move SRAM map to claim more io space
omap: Remap L3, L4 to get more kernel io address space
omap: Split OMAP2_IO_ADDRESS to L3 and L4
Tony Lindgren (9):
omap: Use ioremap in dispc.c
omap: Use ioremap for omap4 L4 code
omap: Use getnstimeofday for omap_device
omap: Use ioremap in omap_hwmod.c
omap: Use ioremap in gpio.c
omap: Use ioremap in dmtimer.c
omap: Use ioremap in dma.c
omap: Use ioremap in irq.c
omap: Change low-level serial init to use ioremap
arch/arm/mach-omap1/serial.c | 11 +
arch/arm/mach-omap2/board-2430sdp.c | 2
arch/arm/mach-omap2/board-3430sdp.c | 2
arch/arm/mach-omap2/board-4430sdp.c | 15 +-
arch/arm/mach-omap2/board-apollon.c | 2
arch/arm/mach-omap2/board-generic.c | 2
arch/arm/mach-omap2/board-h4.c | 2
arch/arm/mach-omap2/board-ldp.c | 2
arch/arm/mach-omap2/board-n8x0.c | 6 -
arch/arm/mach-omap2/board-omap3beagle.c | 2
arch/arm/mach-omap2/board-omap3evm.c | 2
arch/arm/mach-omap2/board-omap3pandora.c | 2
arch/arm/mach-omap2/board-overo.c | 2
arch/arm/mach-omap2/board-rx51.c | 2
arch/arm/mach-omap2/board-zoom2.c | 2
arch/arm/mach-omap2/cm.h | 6 -
arch/arm/mach-omap2/io.c | 18 ++
arch/arm/mach-omap2/irq.c | 12 +
arch/arm/mach-omap2/omap-smp.c | 28 ++-
arch/arm/mach-omap2/omap_hwmod.c | 18 +-
arch/arm/mach-omap2/pm-debug.c | 3
arch/arm/mach-omap2/prm.h | 6 -
arch/arm/mach-omap2/sdrc.h | 9 +
arch/arm/mach-omap2/serial.c | 15 +-
arch/arm/mach-omap2/sram242x.S | 4
arch/arm/mach-omap2/sram243x.S | 4
arch/arm/mach-omap2/timer-gp.c | 3
arch/arm/plat-omap/common.c | 44 ++---
arch/arm/plat-omap/dma.c | 34 +++-
arch/arm/plat-omap/dmtimer.c | 16 +-
arch/arm/plat-omap/gpio.c | 222 ++++++++++++++-----------
arch/arm/plat-omap/include/mach/control.h | 15 +-
arch/arm/plat-omap/include/mach/debug-macro.S | 4
arch/arm/plat-omap/include/mach/entry-macro.S | 6 -
arch/arm/plat-omap/include/mach/io.h | 124 ++++++++++----
arch/arm/plat-omap/include/mach/omap44xx.h | 8 -
arch/arm/plat-omap/include/mach/sdrc.h | 6 -
arch/arm/plat-omap/include/mach/vmalloc.h | 2
arch/arm/plat-omap/io.c | 20 ++
arch/arm/plat-omap/omap_device.c | 50 ++----
arch/arm/plat-omap/sram.c | 24 +--
drivers/video/omap/dispc.c | 20 ++
42 files changed, 479 insertions(+), 298 deletions(-)
--
Signature
next reply other threads:[~2009-10-16 23:40 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-16 23:40 Tony Lindgren [this message]
2009-10-16 23:40 ` [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space Tony Lindgren
2009-10-16 23:40 ` [PATCH 01/14] omap: Change low-level serial init to use ioremap Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 02/14] omap: Use ioremap in irq.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 03/14] omap: Use ioremap in dma.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 04/14] omap: Use ioremap in dmtimer.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 05/14] omap: Use ioremap in gpio.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-17 8:10 ` Russell King - ARM Linux
2009-10-17 8:10 ` Russell King - ARM Linux
2009-10-17 16:13 ` Tony Lindgren
2009-10-17 16:13 ` Tony Lindgren
2009-10-19 0:19 ` Tony Lindgren
2009-10-19 0:19 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 06/14] omap: Use ioremap in omap_hwmod.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 07/14] omap: Use getnstimeofday for omap_device Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 08/14] omap: Use ioremap for omap4 L4 code Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:46 ` Tony Lindgren
2009-10-16 23:46 ` Tony Lindgren
2009-10-17 10:48 ` Shilimkar, Santosh
2009-10-17 10:48 ` Shilimkar, Santosh
2009-10-17 16:19 ` Tony Lindgren
2009-10-17 16:19 ` Tony Lindgren
2009-10-19 0:24 ` Tony Lindgren
2009-10-19 0:24 ` Tony Lindgren
2009-10-19 7:27 ` Shilimkar, Santosh
2009-10-19 7:27 ` Shilimkar, Santosh
2009-10-19 17:12 ` Tony Lindgren
2009-10-19 17:12 ` Tony Lindgren
2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 17:38 ` Tony Lindgren
2009-10-19 17:38 ` Tony Lindgren
2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto
2009-10-20 6:34 ` Shilimkar, Santosh
2009-10-20 6:34 ` Shilimkar, Santosh
2009-10-16 23:41 ` [PATCH 09/14] omap: Use ioremap in dispc.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4 Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-20 0:20 ` Tony Lindgren
2009-10-20 0:20 ` Tony Lindgren
2009-10-20 6:32 ` Shilimkar, Santosh
2009-10-20 6:32 ` Shilimkar, Santosh
2009-10-16 23:42 ` [PATCH 12/14] omap: Move SRAM map to claim more io space Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 13/14] omap: Fix DEBUG_LL UART io address Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091016233624.2463.26653.stgit@localhost \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.