From: Tony Lindgren <tony@atomide.com> To: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org, Santosh Shilimkar <santosh.shilimkar@ti.com> Subject: [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals. Date: Fri, 16 Oct 2009 16:42:48 -0700 [thread overview] Message-ID: <20091016234247.2463.16684.stgit@localhost> (raw) In-Reply-To: <20091016233624.2463.26653.stgit@localhost> From: Santosh Shilimkar <santosh.shilimkar@ti.com> This patch adds few necessary peripherals for OMAP4. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/io.c | 18 +++++++++++++++++ arch/arm/plat-omap/include/mach/io.h | 29 +++++++++++++++++++++++++--- arch/arm/plat-omap/include/mach/omap44xx.h | 3 +++ arch/arm/plat-omap/io.c | 8 ++++++++ 4 files changed, 55 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad..fc62953 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .type = MT_DEVICE, }, { + .virtual = OMAP44XX_EMIF1_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), + .length = OMAP44XX_EMIF1_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_EMIF2_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), + .length = OMAP44XX_EMIF2_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_DMM_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), + .length = OMAP44XX_DMM_SIZE, + .type = MT_DEVICE, + }, + { .virtual = L4_PER_44XX_VIRT, .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), .length = L4_PER_44XX_SIZE, diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index a8f931a..7e5319f 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -66,15 +66,19 @@ #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + #define OMAP4_GPMC_IO_OFFSET 0xa9000000 #define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ - #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ #define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) @@ -214,6 +218,11 @@ #define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE /* 0x54000000 --> 0xfe800000 */ #define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) @@ -225,6 +234,20 @@ #define OMAP44XX_GPMC_SIZE SZ_1M +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h index 8b4a578..3361897 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -22,6 +22,9 @@ #define L4_PER_44XX_BASE 0x48000000 #define L4_EMU_44XX_BASE 0x54000000 #define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 #define OMAP4430_CM_BASE 0x4a004000 #define OMAP4430_PRM_BASE 0x48306000 diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index eb74ab2..93c1d53 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) + return XLATE(p, OMAP44XX_EMIF1_PHYS, \ + OMAP44XX_EMIF1_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) + return XLATE(p, OMAP44XX_EMIF2_PHYS, \ + OMAP44XX_EMIF2_VIRT); + if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) + return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals. Date: Fri, 16 Oct 2009 16:42:48 -0700 [thread overview] Message-ID: <20091016234247.2463.16684.stgit@localhost> (raw) In-Reply-To: <20091016233624.2463.26653.stgit@localhost> From: Santosh Shilimkar <santosh.shilimkar@ti.com> This patch adds few necessary peripherals for OMAP4. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/io.c | 18 +++++++++++++++++ arch/arm/plat-omap/include/mach/io.h | 29 +++++++++++++++++++++++++--- arch/arm/plat-omap/include/mach/omap44xx.h | 3 +++ arch/arm/plat-omap/io.c | 8 ++++++++ 4 files changed, 55 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad..fc62953 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .type = MT_DEVICE, }, { + .virtual = OMAP44XX_EMIF1_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS), + .length = OMAP44XX_EMIF1_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_EMIF2_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS), + .length = OMAP44XX_EMIF2_SIZE, + .type = MT_DEVICE, + }, + { + .virtual = OMAP44XX_DMM_VIRT, + .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS), + .length = OMAP44XX_DMM_SIZE, + .type = MT_DEVICE, + }, + { .virtual = L4_PER_44XX_VIRT, .pfn = __phys_to_pfn(L4_PER_44XX_PHYS), .length = L4_PER_44XX_SIZE, diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index a8f931a..7e5319f 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -66,15 +66,19 @@ #define OMAP2_L3_IO_OFFSET 0x90000000 #define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ + #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 +#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) + #define OMAP4_GPMC_IO_OFFSET 0xa9000000 #define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ - #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ #define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) @@ -214,6 +218,11 @@ #define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) #define L4_PER_44XX_SIZE SZ_4M +#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE + /* 0x49000000 --> 0xfb000000 */ +#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) +#define L4_ABE_44XX_SIZE SZ_1M + #define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE /* 0x54000000 --> 0xfe800000 */ #define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) @@ -225,6 +234,20 @@ #define OMAP44XX_GPMC_SIZE SZ_1M +#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE + /* 0x4c000000 --> 0xfd100000 */ +#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF1_SIZE SZ_1M + +#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE + /* 0x4d000000 --> 0xfd200000 */ +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_EMIF2_SIZE SZ_1M + +#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE + /* 0x4e000000 --> 0xfd300000 */ +#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) +#define OMAP44XX_DMM_SIZE SZ_1M /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h index 8b4a578..3361897 100644 --- a/arch/arm/plat-omap/include/mach/omap44xx.h +++ b/arch/arm/plat-omap/include/mach/omap44xx.h @@ -22,6 +22,9 @@ #define L4_PER_44XX_BASE 0x48000000 #define L4_EMU_44XX_BASE 0x54000000 #define L3_44XX_BASE 0x44000000 +#define OMAP44XX_EMIF1_BASE 0x4c000000 +#define OMAP44XX_EMIF2_BASE 0x4d000000 +#define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 #define OMAP4430_CM_BASE 0x4a004000 #define OMAP4430_PRM_BASE 0x48306000 diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index eb74ab2..93c1d53 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT); if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE)) return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE)) + return XLATE(p, OMAP44XX_EMIF1_PHYS, \ + OMAP44XX_EMIF1_VIRT); + if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE)) + return XLATE(p, OMAP44XX_EMIF2_PHYS, \ + OMAP44XX_EMIF2_VIRT); + if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE)) + return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT); if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE)) return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT); if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
next prev parent reply other threads:[~2009-10-16 23:42 UTC|newest] Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-10-16 23:40 [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space Tony Lindgren 2009-10-16 23:40 ` Tony Lindgren 2009-10-16 23:40 ` [PATCH 01/14] omap: Change low-level serial init to use ioremap Tony Lindgren 2009-10-16 23:40 ` Tony Lindgren 2009-10-16 23:40 ` [PATCH 02/14] omap: Use ioremap in irq.c Tony Lindgren 2009-10-16 23:40 ` Tony Lindgren 2009-10-16 23:40 ` [PATCH 03/14] omap: Use ioremap in dma.c Tony Lindgren 2009-10-16 23:40 ` Tony Lindgren 2009-10-16 23:40 ` [PATCH 04/14] omap: Use ioremap in dmtimer.c Tony Lindgren 2009-10-16 23:40 ` Tony Lindgren 2009-10-16 23:41 ` [PATCH 05/14] omap: Use ioremap in gpio.c Tony Lindgren 2009-10-16 23:41 ` Tony Lindgren 2009-10-17 8:10 ` Russell King - ARM Linux 2009-10-17 8:10 ` Russell King - ARM Linux 2009-10-17 16:13 ` Tony Lindgren 2009-10-17 16:13 ` Tony Lindgren 2009-10-19 0:19 ` Tony Lindgren 2009-10-19 0:19 ` Tony Lindgren 2009-10-16 23:41 ` [PATCH 06/14] omap: Use ioremap in omap_hwmod.c Tony Lindgren 2009-10-16 23:41 ` Tony Lindgren 2009-10-16 23:41 ` [PATCH 07/14] omap: Use getnstimeofday for omap_device Tony Lindgren 2009-10-16 23:41 ` Tony Lindgren 2009-10-16 23:41 ` [PATCH 08/14] omap: Use ioremap for omap4 L4 code Tony Lindgren 2009-10-16 23:41 ` Tony Lindgren 2009-10-16 23:46 ` Tony Lindgren 2009-10-16 23:46 ` Tony Lindgren 2009-10-17 10:48 ` Shilimkar, Santosh 2009-10-17 10:48 ` Shilimkar, Santosh 2009-10-17 16:19 ` Tony Lindgren 2009-10-17 16:19 ` Tony Lindgren 2009-10-19 0:24 ` Tony Lindgren 2009-10-19 0:24 ` Tony Lindgren 2009-10-19 7:27 ` Shilimkar, Santosh 2009-10-19 7:27 ` Shilimkar, Santosh 2009-10-19 17:12 ` Tony Lindgren 2009-10-19 17:12 ` Tony Lindgren 2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto 2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto 2009-10-19 17:38 ` Tony Lindgren 2009-10-19 17:38 ` Tony Lindgren 2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto 2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto 2009-10-20 6:34 ` Shilimkar, Santosh 2009-10-20 6:34 ` Shilimkar, Santosh 2009-10-16 23:41 ` [PATCH 09/14] omap: Use ioremap in dispc.c Tony Lindgren 2009-10-16 23:41 ` Tony Lindgren 2009-10-16 23:42 ` [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4 Tony Lindgren 2009-10-16 23:42 ` Tony Lindgren 2009-10-16 23:42 ` [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space Tony Lindgren 2009-10-16 23:42 ` Tony Lindgren 2009-10-20 0:20 ` Tony Lindgren 2009-10-20 0:20 ` Tony Lindgren 2009-10-20 6:32 ` Shilimkar, Santosh 2009-10-20 6:32 ` Shilimkar, Santosh 2009-10-16 23:42 ` [PATCH 12/14] omap: Move SRAM map to claim more io space Tony Lindgren 2009-10-16 23:42 ` Tony Lindgren 2009-10-16 23:42 ` [PATCH 13/14] omap: Fix DEBUG_LL UART io address Tony Lindgren 2009-10-16 23:42 ` Tony Lindgren 2009-10-16 23:42 ` Tony Lindgren [this message] 2009-10-16 23:42 ` [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20091016234247.2463.16684.stgit@localhost \ --to=tony@atomide.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=santosh.shilimkar@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.