From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org, Santosh Shilimkar <santosh.shilimkar@ti.com>
Subject: [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
Date: Fri, 16 Oct 2009 16:42:13 -0700 [thread overview]
Message-ID: <20091016234213.2463.61298.stgit@localhost> (raw)
In-Reply-To: <20091016233624.2463.26653.stgit@localhost>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
This patch remap L3 and L4 io space to get more kernel address space.
With this patch, 512 MB of IO space is reclaimed.
Some more combinations are possible but to make it uniform across
OMAP24XX, OMAP34XX and OMAP4430, these io combinations are chosen
Once this is reviewed and tested sufficiently, a documentation entry can
be created to ease up reading and debugging.
Like "Documentation/arm/omap/io_map.txt"
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/mach/io.h | 97 ++++++++++++++++++-----------
arch/arm/plat-omap/include/mach/vmalloc.h | 2 -
2 files changed, 60 insertions(+), 39 deletions(-)
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index c475be7..a8f931a 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -66,8 +66,18 @@
#define OMAP2_L3_IO_OFFSET 0x90000000
#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-#define OMAP2_L4_IO_OFFSET 0x90000000
+#define OMAP4_L3_IO_OFFSET 0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_GPMC_IO_OFFSET 0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_L4_IO_OFFSET 0xb2000000
#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
@@ -85,24 +95,27 @@
*/
/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
-#define L3_24XX_VIRT 0xf8000000
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
-#define L4_24XX_VIRT 0xd8000000
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
-#define L4_WK_243X_VIRT 0xd9000000
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
-#define OMAP243X_GPMC_VIRT 0xFE000000
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+ /* 0x6e000000 --> 0xfe000000 */
#define OMAP243X_GPMC_SIZE SZ_1M
#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT 0xFD000000
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SDRC_SIZE SZ_1M
#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT 0xFC000000
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SMS_SIZE SZ_1M
/* DSP */
@@ -123,12 +136,12 @@
*/
/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
-#define L3_34XX_VIRT 0xf8000000
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
-#define L4_34XX_VIRT 0xd8000000
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
/*
@@ -136,28 +149,33 @@
* VPOM3430 was not working for Int controller
*/
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT 0xd8300000
+#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_34XX_SIZE SZ_1M
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT 0xd9000000
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
+ /* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_PER_34XX_SIZE SZ_1M
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT 0xe4000000
-#define L4_EMU_34XX_SIZE SZ_64M
+#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE SZ_8M
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT 0xFE000000
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
+ /* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP34XX_GPMC_SIZE SZ_1M
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT 0xFC000000
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SMS_SIZE SZ_1M
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT 0xFD000000
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SDRC_SIZE SZ_1M
/* DSP */
@@ -178,29 +196,32 @@
*/
/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS L3_44XX_BASE
-#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
#define L3_44XX_SIZE SZ_1M
-#define L4_44XX_PHYS L4_44XX_BASE
-#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_44XX_SIZE SZ_4M
-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_44XX_SIZE SZ_1M
#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT 0xd8000000
+ /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_PER_44XX_SIZE SZ_4M
#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT 0xe4000000
-#define L4_EMU_44XX_SIZE SZ_64M
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE SZ_8M
#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT 0xe0000000
+ /* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
#define OMAP44XX_GPMC_SIZE SZ_1M
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index b97dfaf..9eebf62 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x38000000)
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
Date: Fri, 16 Oct 2009 16:42:13 -0700 [thread overview]
Message-ID: <20091016234213.2463.61298.stgit@localhost> (raw)
In-Reply-To: <20091016233624.2463.26653.stgit@localhost>
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
This patch remap L3 and L4 io space to get more kernel address space.
With this patch, 512 MB of IO space is reclaimed.
Some more combinations are possible but to make it uniform across
OMAP24XX, OMAP34XX and OMAP4430, these io combinations are chosen
Once this is reviewed and tested sufficiently, a documentation entry can
be created to ease up reading and debugging.
Like "Documentation/arm/omap/io_map.txt"
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/include/mach/io.h | 97 ++++++++++++++++++-----------
arch/arm/plat-omap/include/mach/vmalloc.h | 2 -
2 files changed, 60 insertions(+), 39 deletions(-)
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index c475be7..a8f931a 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -66,8 +66,18 @@
#define OMAP2_L3_IO_OFFSET 0x90000000
#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-#define OMAP2_L4_IO_OFFSET 0x90000000
+#define OMAP4_L3_IO_OFFSET 0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_GPMC_IO_OFFSET 0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_L4_IO_OFFSET 0xb2000000
#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
@@ -85,24 +95,27 @@
*/
/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
-#define L3_24XX_VIRT 0xf8000000
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
-#define L4_24XX_VIRT 0xd8000000
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
-#define L4_WK_243X_VIRT 0xd9000000
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
-#define OMAP243X_GPMC_VIRT 0xFE000000
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+ /* 0x6e000000 --> 0xfe000000 */
#define OMAP243X_GPMC_SIZE SZ_1M
#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT 0xFD000000
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SDRC_SIZE SZ_1M
#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT 0xFC000000
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP243X_SMS_SIZE SZ_1M
/* DSP */
@@ -123,12 +136,12 @@
*/
/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
-#define L3_34XX_VIRT 0xf8000000
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
-#define L4_34XX_VIRT 0xd8000000
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
/*
@@ -136,28 +149,33 @@
* VPOM3430 was not working for Int controller
*/
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT 0xd8300000
+#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_34XX_SIZE SZ_1M
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT 0xd9000000
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
+ /* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_PER_34XX_SIZE SZ_1M
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT 0xe4000000
-#define L4_EMU_34XX_SIZE SZ_64M
+#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE SZ_8M
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT 0xFE000000
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
+ /* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP34XX_GPMC_SIZE SZ_1M
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT 0xFC000000
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
+ /* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SMS_SIZE SZ_1M
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT 0xFD000000
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
+ /* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
#define OMAP343X_SDRC_SIZE SZ_1M
/* DSP */
@@ -178,29 +196,32 @@
*/
/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS L3_44XX_BASE
-#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
#define L3_44XX_SIZE SZ_1M
-#define L4_44XX_PHYS L4_44XX_BASE
-#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_44XX_SIZE SZ_4M
-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_WK_44XX_SIZE SZ_1M
#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT 0xd8000000
+ /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_PER_44XX_SIZE SZ_4M
#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT 0xe4000000
-#define L4_EMU_44XX_SIZE SZ_64M
+ /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE SZ_8M
#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT 0xe0000000
+ /* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
#define OMAP44XX_GPMC_SIZE SZ_1M
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index b97dfaf..9eebf62 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x38000000)
next prev parent reply other threads:[~2009-10-16 23:42 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-16 23:40 [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 01/14] omap: Change low-level serial init to use ioremap Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 02/14] omap: Use ioremap in irq.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 03/14] omap: Use ioremap in dma.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:40 ` [PATCH 04/14] omap: Use ioremap in dmtimer.c Tony Lindgren
2009-10-16 23:40 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 05/14] omap: Use ioremap in gpio.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-17 8:10 ` Russell King - ARM Linux
2009-10-17 8:10 ` Russell King - ARM Linux
2009-10-17 16:13 ` Tony Lindgren
2009-10-17 16:13 ` Tony Lindgren
2009-10-19 0:19 ` Tony Lindgren
2009-10-19 0:19 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 06/14] omap: Use ioremap in omap_hwmod.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 07/14] omap: Use getnstimeofday for omap_device Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:41 ` [PATCH 08/14] omap: Use ioremap for omap4 L4 code Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:46 ` Tony Lindgren
2009-10-16 23:46 ` Tony Lindgren
2009-10-17 10:48 ` Shilimkar, Santosh
2009-10-17 10:48 ` Shilimkar, Santosh
2009-10-17 16:19 ` Tony Lindgren
2009-10-17 16:19 ` Tony Lindgren
2009-10-19 0:24 ` Tony Lindgren
2009-10-19 0:24 ` Tony Lindgren
2009-10-19 7:27 ` Shilimkar, Santosh
2009-10-19 7:27 ` Shilimkar, Santosh
2009-10-19 17:12 ` Tony Lindgren
2009-10-19 17:12 ` Tony Lindgren
2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 17:21 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 17:38 ` Tony Lindgren
2009-10-19 17:38 ` Tony Lindgren
2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto
2009-10-19 18:07 ` Aguirre Rodriguez, Sergio Alberto
2009-10-20 6:34 ` Shilimkar, Santosh
2009-10-20 6:34 ` Shilimkar, Santosh
2009-10-16 23:41 ` [PATCH 09/14] omap: Use ioremap in dispc.c Tony Lindgren
2009-10-16 23:41 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4 Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren [this message]
2009-10-16 23:42 ` [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space Tony Lindgren
2009-10-20 0:20 ` Tony Lindgren
2009-10-20 0:20 ` Tony Lindgren
2009-10-20 6:32 ` Shilimkar, Santosh
2009-10-20 6:32 ` Shilimkar, Santosh
2009-10-16 23:42 ` [PATCH 12/14] omap: Move SRAM map to claim more io space Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 13/14] omap: Fix DEBUG_LL UART io address Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
2009-10-16 23:42 ` [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals Tony Lindgren
2009-10-16 23:42 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091016234213.2463.61298.stgit@localhost \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.