From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Dong Aisheng <b29396@freescale.com>
Cc: alsa-devel@alsa-project.org, s.hauer@pengutronix.de,
broonie@opensource.wolfsonmicro.com, w.sang@pengutronix.de,
kernel@pengutronix.de, lrg@ti.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/3] ARM: mx28evk: add platform data for saif
Date: Wed, 7 Sep 2011 20:18:11 +0200 [thread overview]
Message-ID: <20110907181811.GX28816@pengutronix.de> (raw)
In-Reply-To: <1315403858-9904-2-git-send-email-b29396@freescale.com>
Hello,
On Wed, Sep 07, 2011 at 09:57:36PM +0800, Dong Aisheng wrote:
> This is for supporting saif record function.
>
> Signed-off-by: Dong Aisheng <b29396@freescale.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Liam Girdwood <lrg@ti.com>
>
> ---
> changes since v1:
> * move saif clkmux code into mach-specific part
> ---
> arch/arm/mach-mxs/clock-mx28.c | 47 +++++++++++++++++++++++
> arch/arm/mach-mxs/devices-mx28.h | 4 +-
> arch/arm/mach-mxs/devices/platform-mxs-saif.c | 5 +-
> arch/arm/mach-mxs/include/mach/common.h | 2 +
> arch/arm/mach-mxs/include/mach/devices-common.h | 4 +-
> arch/arm/mach-mxs/include/mach/digctl.h | 18 +++++++++
> arch/arm/mach-mxs/mach-mx28evk.c | 15 ++++++-
> 7 files changed, 89 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
> index 7954013..f0c7cb6 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -29,6 +29,7 @@
> #include <mach/mx28.h>
> #include <mach/common.h>
> #include <mach/clock.h>
> +#include <mach/digctl.h>
>
> #include "regs-clkctrl-mx28.h"
>
> @@ -43,6 +44,52 @@ static struct clk emi_clk;
> static struct clk saif0_clk;
> static struct clk saif1_clk;
> static struct clk clk32k_clk;
> +static unsigned int saif_clkmux;
> +
> +/*
> + * HW_SAIF_CLKMUX_SEL:
> + * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
> + * clock pins selected for SAIF1 input clocks.
> + * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
> + * SAIF0 clock inputs selected for SAIF1 input clocks.
> + * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
> + * clocks.
> + * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
> + * clocks.
> + */
> +int mxs_saif_clkmux_select(unsigned int clkmux)
> +{
> + if (clkmux > 0x3)
> + return -EINVAL;
> +
> + __raw_writel(clkmux << 10, DIGCTRL_BASE_ADDR + MXS_SET_ADDR);
hmm, in my version of the mx28 reference the module is named DIGCTL?!
shouldn't that be something like:
DIGCTRL_BASE_ADDR + DIGCTRL_CTRL + MXS_SET_ADDR?
and is it intended that if you do:
mxs_saif_clkmux_select(1);
mxs_saif_clkmux_select(2);
the SAIF_CLKMUX_SEL bitfield ends up being 3?
> + saif_clkmux = clkmux;
> + return 0;
> +}
> +
> +int mxs_get_saif_clk_master_id(unsigned int saif_id)
> +{
> + unsigned int master_id;
> +
> + switch (saif_clkmux) {
> + case MXS_DIGCTL_SAIF_CLKMUX_DIRECT:
> + master_id = saif_id;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT:
> + master_id = saif_id ? 0 : 1;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0:
> + master_id = 0;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1:
> + master_id = 1;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return master_id;
> +}
These two functions are only supposed to be called by arch code right?
(If not, you might need to export them.)
>
> static int _raw_clk_enable(struct clk *clk)
> {
> diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
> index c888710..40be649 100644
> --- a/arch/arm/mach-mxs/devices-mx28.h
> +++ b/arch/arm/mach-mxs/devices-mx28.h
> @@ -47,6 +47,8 @@ struct platform_device *__init mx28_add_mxsfb(
> const struct mxsfb_platform_data *pdata);
>
> extern const struct mxs_saif_data mx28_saif_data[] __initconst;
> -#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
> +#define mx28_add_saif(id, pdata) \
> + mxs_add_saif(&mx28_saif_data[id], pdata)
should it be a seperate patch to add pdata for saif devices?
> +
undesirable empty line.
>
> struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
> diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> index 1ec965e..f6e3a60 100644
> --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> @@ -32,7 +32,8 @@ const struct mxs_saif_data mx28_saif_data[] __initconst = {
> };
> #endif
>
> -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata)
> {
> struct resource res[] = {
> {
> @@ -56,5 +57,5 @@ struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> };
>
> return mxs_add_platform_device("mxs-saif", data->id, res,
> - ARRAY_SIZE(res), NULL, 0);
> + ARRAY_SIZE(res), pdata, sizeof(*pdata));
> }
> diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
> index 635bb5d..bf91a10 100644
> --- a/arch/arm/mach-mxs/include/mach/common.h
> +++ b/arch/arm/mach-mxs/include/mach/common.h
> @@ -29,4 +29,6 @@ extern void mx28_init_irq(void);
>
> extern void icoll_init_irq(void);
>
> +extern int mxs_saif_clkmux_select(unsigned int clkmux);
> +extern int mxs_get_saif_clk_master_id(unsigned int saif_id);
> #endif /* __MACH_MXS_COMMON_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
> index a8080f4..dc369c1 100644
> --- a/arch/arm/mach-mxs/include/mach/devices-common.h
> +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
> @@ -94,6 +94,7 @@ struct platform_device *__init mxs_add_mxs_pwm(
> resource_size_t iobase, int id);
>
> /* saif */
> +#include <sound/saif.h>
> struct mxs_saif_data {
> int id;
> resource_size_t iobase;
> @@ -103,4 +104,5 @@ struct mxs_saif_data {
> };
>
> struct platform_device *__init mxs_add_saif(
> - const struct mxs_saif_data *data);
> + const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata);
> diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
> new file mode 100644
> index 0000000..6231e10
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/digctl.h
> @@ -0,0 +1,18 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __MACH_DIGCTL_H__
> +#define __MACH_DIGCTL_H__
> +
> +/* MXS DIGCTL SAIF CLKMUX */
> +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
> +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
> +
> +#endif
> diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
> index 4a3cca3..6affe5d 100644
> --- a/arch/arm/mach-mxs/mach-mx28evk.c
> +++ b/arch/arm/mach-mxs/mach-mx28evk.c
> @@ -28,6 +28,7 @@
>
> #include <mach/common.h>
> #include <mach/iomux-mx28.h>
> +#include <mach/digctl.h>
>
> #include "devices-mx28.h"
>
> @@ -417,6 +418,16 @@ static void __init mx28evk_add_regulators(void)
> static void __init mx28evk_add_regulators(void) {}
> #endif
>
> +static int mx28evk_mxs_saif_pinit(void)
> +{
> + return mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
> +}
> +
> +struct mxs_saif_platform_data mx28evk_mxs_saif_pdata __initdata = {
const + __initconst?
> + .init = mx28evk_mxs_saif_pinit,
> + .get_master_id = mxs_get_saif_clk_master_id,
> +};
> +
> static void __init mx28evk_init(void)
> {
> int ret;
> @@ -457,8 +468,8 @@ static void __init mx28evk_init(void)
>
> mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
>
> - mx28_add_saif(0);
> - mx28_add_saif(1);
> + mx28_add_saif(0, &mx28evk_mxs_saif_pdata);
> + mx28_add_saif(1, &mx28evk_mxs_saif_pdata);
>
> mx28_add_mxs_i2c(0);
> i2c_register_board_info(0, mxs_i2c0_board_info,
> --
> 1.7.0.4
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
WARNING: multiple messages have this Message-ID (diff)
From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: mx28evk: add platform data for saif
Date: Wed, 7 Sep 2011 20:18:11 +0200 [thread overview]
Message-ID: <20110907181811.GX28816@pengutronix.de> (raw)
In-Reply-To: <1315403858-9904-2-git-send-email-b29396@freescale.com>
Hello,
On Wed, Sep 07, 2011 at 09:57:36PM +0800, Dong Aisheng wrote:
> This is for supporting saif record function.
>
> Signed-off-by: Dong Aisheng <b29396@freescale.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Liam Girdwood <lrg@ti.com>
>
> ---
> changes since v1:
> * move saif clkmux code into mach-specific part
> ---
> arch/arm/mach-mxs/clock-mx28.c | 47 +++++++++++++++++++++++
> arch/arm/mach-mxs/devices-mx28.h | 4 +-
> arch/arm/mach-mxs/devices/platform-mxs-saif.c | 5 +-
> arch/arm/mach-mxs/include/mach/common.h | 2 +
> arch/arm/mach-mxs/include/mach/devices-common.h | 4 +-
> arch/arm/mach-mxs/include/mach/digctl.h | 18 +++++++++
> arch/arm/mach-mxs/mach-mx28evk.c | 15 ++++++-
> 7 files changed, 89 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
> index 7954013..f0c7cb6 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -29,6 +29,7 @@
> #include <mach/mx28.h>
> #include <mach/common.h>
> #include <mach/clock.h>
> +#include <mach/digctl.h>
>
> #include "regs-clkctrl-mx28.h"
>
> @@ -43,6 +44,52 @@ static struct clk emi_clk;
> static struct clk saif0_clk;
> static struct clk saif1_clk;
> static struct clk clk32k_clk;
> +static unsigned int saif_clkmux;
> +
> +/*
> + * HW_SAIF_CLKMUX_SEL:
> + * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
> + * clock pins selected for SAIF1 input clocks.
> + * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
> + * SAIF0 clock inputs selected for SAIF1 input clocks.
> + * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
> + * clocks.
> + * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
> + * clocks.
> + */
> +int mxs_saif_clkmux_select(unsigned int clkmux)
> +{
> + if (clkmux > 0x3)
> + return -EINVAL;
> +
> + __raw_writel(clkmux << 10, DIGCTRL_BASE_ADDR + MXS_SET_ADDR);
hmm, in my version of the mx28 reference the module is named DIGCTL?!
shouldn't that be something like:
DIGCTRL_BASE_ADDR + DIGCTRL_CTRL + MXS_SET_ADDR?
and is it intended that if you do:
mxs_saif_clkmux_select(1);
mxs_saif_clkmux_select(2);
the SAIF_CLKMUX_SEL bitfield ends up being 3?
> + saif_clkmux = clkmux;
> + return 0;
> +}
> +
> +int mxs_get_saif_clk_master_id(unsigned int saif_id)
> +{
> + unsigned int master_id;
> +
> + switch (saif_clkmux) {
> + case MXS_DIGCTL_SAIF_CLKMUX_DIRECT:
> + master_id = saif_id;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT:
> + master_id = saif_id ? 0 : 1;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0:
> + master_id = 0;
> + break;
> + case MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1:
> + master_id = 1;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return master_id;
> +}
These two functions are only supposed to be called by arch code right?
(If not, you might need to export them.)
>
> static int _raw_clk_enable(struct clk *clk)
> {
> diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
> index c888710..40be649 100644
> --- a/arch/arm/mach-mxs/devices-mx28.h
> +++ b/arch/arm/mach-mxs/devices-mx28.h
> @@ -47,6 +47,8 @@ struct platform_device *__init mx28_add_mxsfb(
> const struct mxsfb_platform_data *pdata);
>
> extern const struct mxs_saif_data mx28_saif_data[] __initconst;
> -#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
> +#define mx28_add_saif(id, pdata) \
> + mxs_add_saif(&mx28_saif_data[id], pdata)
should it be a seperate patch to add pdata for saif devices?
> +
undesirable empty line.
>
> struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
> diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> index 1ec965e..f6e3a60 100644
> --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> +++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
> @@ -32,7 +32,8 @@ const struct mxs_saif_data mx28_saif_data[] __initconst = {
> };
> #endif
>
> -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> +struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata)
> {
> struct resource res[] = {
> {
> @@ -56,5 +57,5 @@ struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
> };
>
> return mxs_add_platform_device("mxs-saif", data->id, res,
> - ARRAY_SIZE(res), NULL, 0);
> + ARRAY_SIZE(res), pdata, sizeof(*pdata));
> }
> diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
> index 635bb5d..bf91a10 100644
> --- a/arch/arm/mach-mxs/include/mach/common.h
> +++ b/arch/arm/mach-mxs/include/mach/common.h
> @@ -29,4 +29,6 @@ extern void mx28_init_irq(void);
>
> extern void icoll_init_irq(void);
>
> +extern int mxs_saif_clkmux_select(unsigned int clkmux);
> +extern int mxs_get_saif_clk_master_id(unsigned int saif_id);
> #endif /* __MACH_MXS_COMMON_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
> index a8080f4..dc369c1 100644
> --- a/arch/arm/mach-mxs/include/mach/devices-common.h
> +++ b/arch/arm/mach-mxs/include/mach/devices-common.h
> @@ -94,6 +94,7 @@ struct platform_device *__init mxs_add_mxs_pwm(
> resource_size_t iobase, int id);
>
> /* saif */
> +#include <sound/saif.h>
> struct mxs_saif_data {
> int id;
> resource_size_t iobase;
> @@ -103,4 +104,5 @@ struct mxs_saif_data {
> };
>
> struct platform_device *__init mxs_add_saif(
> - const struct mxs_saif_data *data);
> + const struct mxs_saif_data *data,
> + const struct mxs_saif_platform_data *pdata);
> diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
> new file mode 100644
> index 0000000..6231e10
> --- /dev/null
> +++ b/arch/arm/mach-mxs/include/mach/digctl.h
> @@ -0,0 +1,18 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __MACH_DIGCTL_H__
> +#define __MACH_DIGCTL_H__
> +
> +/* MXS DIGCTL SAIF CLKMUX */
> +#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
> +#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
> +#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
> +
> +#endif
> diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
> index 4a3cca3..6affe5d 100644
> --- a/arch/arm/mach-mxs/mach-mx28evk.c
> +++ b/arch/arm/mach-mxs/mach-mx28evk.c
> @@ -28,6 +28,7 @@
>
> #include <mach/common.h>
> #include <mach/iomux-mx28.h>
> +#include <mach/digctl.h>
>
> #include "devices-mx28.h"
>
> @@ -417,6 +418,16 @@ static void __init mx28evk_add_regulators(void)
> static void __init mx28evk_add_regulators(void) {}
> #endif
>
> +static int mx28evk_mxs_saif_pinit(void)
> +{
> + return mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
> +}
> +
> +struct mxs_saif_platform_data mx28evk_mxs_saif_pdata __initdata = {
const + __initconst?
> + .init = mx28evk_mxs_saif_pinit,
> + .get_master_id = mxs_get_saif_clk_master_id,
> +};
> +
> static void __init mx28evk_init(void)
> {
> int ret;
> @@ -457,8 +468,8 @@ static void __init mx28evk_init(void)
>
> mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
>
> - mx28_add_saif(0);
> - mx28_add_saif(1);
> + mx28_add_saif(0, &mx28evk_mxs_saif_pdata);
> + mx28_add_saif(1, &mx28evk_mxs_saif_pdata);
>
> mx28_add_mxs_i2c(0);
> i2c_register_board_info(0, mxs_i2c0_board_info,
> --
> 1.7.0.4
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2011-09-07 18:18 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-07 13:57 [PATCH v2 0/3] ARM: mxs: add recording support for saif Dong Aisheng
2011-09-07 13:57 ` Dong Aisheng
2011-09-07 13:57 ` [PATCH v2 1/3] ARM: mx28evk: add platform data " Dong Aisheng
2011-09-07 13:57 ` Dong Aisheng
2011-09-07 18:18 ` Uwe Kleine-König [this message]
2011-09-07 18:18 ` Uwe Kleine-König
2011-09-08 7:52 ` Dong Aisheng-B29396
2011-09-08 7:52 ` Dong Aisheng-B29396
2011-09-09 13:41 ` Wolfram Sang
2011-09-09 13:41 ` Wolfram Sang
2011-09-10 14:08 ` Uwe Kleine-König
2011-09-10 14:08 ` Uwe Kleine-König
2011-09-07 13:57 ` [PATCH v2 2/3] ARM: mx28evk: set a initial clock rate " Dong Aisheng
2011-09-07 13:57 ` Dong Aisheng
2011-09-07 18:21 ` Uwe Kleine-König
2011-09-07 18:21 ` Uwe Kleine-König
2011-09-08 8:03 ` Dong Aisheng-B29396
2011-09-08 8:03 ` Dong Aisheng-B29396
2011-09-08 8:56 ` Uwe Kleine-König
2011-09-08 8:56 ` Uwe Kleine-König
2011-09-08 9:06 ` Dong Aisheng-B29396
2011-09-08 9:06 ` Dong Aisheng-B29396
2011-09-07 13:57 ` [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks Dong Aisheng
2011-09-07 13:57 ` Dong Aisheng
2011-09-07 18:24 ` Uwe Kleine-König
2011-09-07 18:24 ` Uwe Kleine-König
2011-09-08 8:24 ` Dong Aisheng-B29396
2011-09-08 8:24 ` Dong Aisheng-B29396
2011-09-09 13:42 ` Wolfram Sang
2011-09-09 13:42 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110907181811.GX28816@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=alsa-devel@alsa-project.org \
--cc=b29396@freescale.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lrg@ti.com \
--cc=s.hauer@pengutronix.de \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.