From: Thierry Reding <treding@nvidia.com>
To: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, a.hajda@samsung.com
Subject: Re: [PATCH v5 0/5] drm/dsi: DSI for devices with different control bus
Date: Wed, 2 Mar 2016 17:05:55 +0100 [thread overview]
Message-ID: <20160302160553.GA21529@ulmo.nvidia.com> (raw)
In-Reply-To: <1455268714-28755-1-git-send-email-architt@codeaurora.org>
[-- Attachment #1.1: Type: text/plain, Size: 1966 bytes --]
On Fri, Feb 12, 2016 at 02:48:29PM +0530, Archit Taneja wrote:
> We are currently restricted when it comes to supporting DSI on devices
> that have a non-DSI control bus. For example, DSI encoder chips are
> available in the market that are configured via i2c. Configuring their
> registers via DSI bus is either optional or not available at all.
>
> These devices still need to pass DSI parameters (data lanes, mode flags
> etc) to the DSI host they are connected to. We don't have a way to do
> that at the moment.
>
> After some discussions on the previous RFC[1], we decided to support this
> by providing additional API in drm_mipi_dsi.c which lets us create new DSI
> devices without the need of them to have a DT node.
>
> [1]: https://lkml.org/lkml/2015/6/30/42
>
> Changes in v5:
> - Simplify refactoring as suggested by Thierry.
> - Use abbreviations correctly.
> - Drop "drm/dsi: Check for used channels"
> - Return the correct encoded error code for of_mipi_dsi_device_add
> when CONFIG_OF is disabled.
> - Use mipi_dsi_device_unregister to implement mipi_dsi_remove_device_fn()
> too.
>
> Changes in v4:
> - Added a new patch that fixes build issues when CONFIG_OF is not set.
>
> Changes in v3:
>
> - Incorporated misc comments by Andrzej. Changed from RFC to a PATCH set.
> - Fixed htmldocs warnings.
>
>
> Archit Taneja (5):
> drm/dsi: check for CONFIG_OF when defining of_mipi_dsi_device_add
> drm/dsi: Use mipi_dsi_device_register_full for DSI device creation
> drm/dsi: Try to match non-DT DSI devices
> drm/dsi: Add routine to unregister a DSI device
> drm/dsi: Get DSI host by DT device node
>
> drivers/gpu/drm/drm_mipi_dsi.c | 127 +++++++++++++++++++++++++++++++++++++----
> include/drm/drm_mipi_dsi.h | 26 +++++++++
> 2 files changed, 141 insertions(+), 12 deletions(-)
I've applied this with minor fixups and cleanups to the commit messages.
Thanks,
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <treding@nvidia.com>
To: Archit Taneja <architt@codeaurora.org>
Cc: <dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
<a.hajda@samsung.com>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<l.stach@pengutronix.de>, <robh@kernel.org>,
<linux-arm-msm@vger.kernel.org>, <jani.nikula@linux.intel.com>
Subject: Re: [PATCH v5 0/5] drm/dsi: DSI for devices with different control bus
Date: Wed, 2 Mar 2016 17:05:55 +0100 [thread overview]
Message-ID: <20160302160553.GA21529@ulmo.nvidia.com> (raw)
In-Reply-To: <1455268714-28755-1-git-send-email-architt@codeaurora.org>
[-- Attachment #1: Type: text/plain, Size: 1966 bytes --]
On Fri, Feb 12, 2016 at 02:48:29PM +0530, Archit Taneja wrote:
> We are currently restricted when it comes to supporting DSI on devices
> that have a non-DSI control bus. For example, DSI encoder chips are
> available in the market that are configured via i2c. Configuring their
> registers via DSI bus is either optional or not available at all.
>
> These devices still need to pass DSI parameters (data lanes, mode flags
> etc) to the DSI host they are connected to. We don't have a way to do
> that at the moment.
>
> After some discussions on the previous RFC[1], we decided to support this
> by providing additional API in drm_mipi_dsi.c which lets us create new DSI
> devices without the need of them to have a DT node.
>
> [1]: https://lkml.org/lkml/2015/6/30/42
>
> Changes in v5:
> - Simplify refactoring as suggested by Thierry.
> - Use abbreviations correctly.
> - Drop "drm/dsi: Check for used channels"
> - Return the correct encoded error code for of_mipi_dsi_device_add
> when CONFIG_OF is disabled.
> - Use mipi_dsi_device_unregister to implement mipi_dsi_remove_device_fn()
> too.
>
> Changes in v4:
> - Added a new patch that fixes build issues when CONFIG_OF is not set.
>
> Changes in v3:
>
> - Incorporated misc comments by Andrzej. Changed from RFC to a PATCH set.
> - Fixed htmldocs warnings.
>
>
> Archit Taneja (5):
> drm/dsi: check for CONFIG_OF when defining of_mipi_dsi_device_add
> drm/dsi: Use mipi_dsi_device_register_full for DSI device creation
> drm/dsi: Try to match non-DT DSI devices
> drm/dsi: Add routine to unregister a DSI device
> drm/dsi: Get DSI host by DT device node
>
> drivers/gpu/drm/drm_mipi_dsi.c | 127 +++++++++++++++++++++++++++++++++++++----
> include/drm/drm_mipi_dsi.h | 26 +++++++++
> 2 files changed, 141 insertions(+), 12 deletions(-)
I've applied this with minor fixups and cleanups to the commit messages.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-03-02 16:05 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 5:24 [RFC 0/2] drm/dsi: DSI for devices with different control bus Archit Taneja
2015-06-30 5:24 ` [RFC 1/2] drm/dsi: Create dummy DSI devices Archit Taneja
2015-06-30 5:24 ` Archit Taneja
2015-08-19 8:10 ` Andrzej Hajda
2015-08-19 8:10 ` Andrzej Hajda
2015-08-19 9:30 ` Archit Taneja
2015-06-30 5:24 ` [RFC 2/2] drm/dsi: Get DSI host by DT device node Archit Taneja
2015-06-30 5:24 ` Archit Taneja
2015-08-19 8:46 ` Andrzej Hajda
2015-08-19 8:46 ` Andrzej Hajda
2015-08-19 5:07 ` [RFC 0/2] drm/dsi: DSI for devices with different control bus Archit Taneja
2015-08-19 13:13 ` Thierry Reding
2015-08-19 13:13 ` Thierry Reding
2015-08-19 14:17 ` Lucas Stach
2015-08-19 14:34 ` Thierry Reding
2015-08-19 14:34 ` Thierry Reding
2015-08-19 14:52 ` Lucas Stach
2015-08-19 14:52 ` Lucas Stach
2015-08-19 15:02 ` Thierry Reding
2015-08-19 15:02 ` Thierry Reding
2015-08-19 15:39 ` Jani Nikula
2015-08-20 4:16 ` Archit Taneja
2015-08-20 11:48 ` Thierry Reding
2015-08-20 11:48 ` Thierry Reding
2015-08-21 6:09 ` Archit Taneja
2015-08-21 6:09 ` Archit Taneja
2015-09-07 11:46 ` Archit Taneja
2015-09-07 11:46 ` Archit Taneja
2015-09-08 10:27 ` Andrzej Hajda
2015-09-10 6:15 ` Archit Taneja
2015-09-10 6:15 ` Archit Taneja
2015-09-10 7:32 ` Thierry Reding
2015-09-10 7:32 ` Thierry Reding
2015-09-15 10:32 ` Archit Taneja
2015-09-15 10:32 ` Archit Taneja
2015-09-15 15:43 ` Rob Herring
2015-09-17 8:56 ` Archit Taneja
2015-09-15 10:41 ` Archit Taneja
2015-09-15 10:41 ` Archit Taneja
2015-10-06 9:24 ` [RFC v2 0/5] " Archit Taneja
2015-10-06 9:24 ` [RFC v2 1/5] drm/dsi: Refactor device creation Archit Taneja
2015-10-06 9:24 ` Archit Taneja
2015-10-30 11:28 ` Andrzej Hajda
2015-10-30 11:28 ` Andrzej Hajda
2015-10-06 9:24 ` [RFC v2 2/5] drm/dsi: Try to match non-DT dsi devices Archit Taneja
2015-10-06 9:24 ` Archit Taneja
2015-10-30 12:42 ` Andrzej Hajda
2015-10-30 12:42 ` Andrzej Hajda
2015-11-02 5:26 ` Archit Taneja
2015-11-02 5:26 ` Archit Taneja
2015-10-06 9:24 ` [RFC v2 3/5] drm/dsi: Check for used channels Archit Taneja
2015-10-06 9:24 ` Archit Taneja
2015-10-30 12:52 ` Andrzej Hajda
2015-11-02 5:28 ` Archit Taneja
2015-11-02 5:28 ` Archit Taneja
2015-10-06 9:24 ` [RFC v2 4/5] drm/dsi: Add routine to unregister dsi device Archit Taneja
2015-10-06 9:24 ` Archit Taneja
2015-10-30 14:21 ` Andrzej Hajda
2015-10-30 14:21 ` Andrzej Hajda
2015-11-02 6:28 ` Archit Taneja
2015-11-02 10:42 ` Andrzej Hajda
2015-11-03 7:18 ` Archit Taneja
2015-10-06 9:24 ` [RFC v2 5/5] drm/dsi: Get DSI host by DT device node Archit Taneja
2015-10-06 9:24 ` Archit Taneja
2015-10-06 10:00 ` kbuild test robot
2015-10-06 10:00 ` kbuild test robot
2015-11-02 10:50 ` Andrzej Hajda
2015-11-02 10:50 ` Andrzej Hajda
2015-11-03 7:20 ` Archit Taneja
2015-11-03 7:20 ` Archit Taneja
2015-11-30 12:01 ` [PATCH v3 0/5] drm/dsi: DSI for devices with different control bus Archit Taneja
2015-11-30 12:01 ` [PATCH v3 1/5] drm/dsi: Refactor device creation Archit Taneja
2015-11-30 12:01 ` Archit Taneja
2015-11-30 12:01 ` [PATCH v3 2/5] drm/dsi: Try to match non-DT dsi devices Archit Taneja
2015-11-30 12:01 ` Archit Taneja
2015-11-30 12:45 ` kbuild test robot
2015-11-30 12:45 ` kbuild test robot
2015-12-07 5:29 ` Archit Taneja
2015-12-07 8:45 ` Jani Nikula
2015-12-07 8:59 ` Archit Taneja
2015-12-07 8:59 ` Archit Taneja
2015-12-07 9:10 ` Jani Nikula
2015-12-07 9:10 ` Jani Nikula
2015-12-07 9:18 ` Archit Taneja
2015-12-07 10:07 ` Jani Nikula
2015-12-07 16:55 ` Rob Clark
2015-11-30 12:01 ` [PATCH v3 3/5] drm/dsi: Check for used channels Archit Taneja
2015-11-30 12:01 ` Archit Taneja
2015-11-30 12:01 ` [PATCH v3 4/5] drm/dsi: Add routine to unregister dsi device Archit Taneja
2015-11-30 12:01 ` Archit Taneja
2015-11-30 12:34 ` Andrzej Hajda
2015-11-30 12:34 ` Andrzej Hajda
2015-11-30 12:01 ` [PATCH v3 5/5] drm/dsi: Get DSI host by DT device node Archit Taneja
2015-11-30 12:01 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 0/6] drm/dsi: DSI for devices with different control bus Archit Taneja
2015-12-10 12:41 ` [PATCH v4 1/6] drm/dsi: check for CONFIG_OF when defining of_mipi_dsi_device_add Archit Taneja
2015-12-10 12:41 ` Archit Taneja
2016-01-21 15:31 ` Thierry Reding
2016-01-21 15:31 ` Thierry Reding
2016-01-26 14:59 ` Archit Taneja
2016-01-26 14:59 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 2/6] drm/dsi: Refactor device creation Archit Taneja
2016-01-21 15:46 ` Thierry Reding
2016-01-21 15:46 ` Thierry Reding
2016-01-26 17:05 ` Archit Taneja
2016-01-26 17:05 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 3/6] drm/dsi: Try to match non-DT dsi devices Archit Taneja
2015-12-10 12:41 ` Archit Taneja
2016-01-21 16:05 ` Thierry Reding
2016-01-21 16:05 ` Thierry Reding
2016-01-26 18:04 ` Archit Taneja
2016-01-26 18:04 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 4/6] drm/dsi: Check for used channels Archit Taneja
2015-12-10 12:41 ` Archit Taneja
2016-01-21 16:11 ` Thierry Reding
2016-01-21 16:11 ` Thierry Reding
2016-01-27 5:16 ` Archit Taneja
2016-01-27 5:16 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 5/6] drm/dsi: Add routine to unregister dsi device Archit Taneja
2015-12-10 12:41 ` Archit Taneja
2016-01-21 16:12 ` Thierry Reding
2016-01-21 16:12 ` Thierry Reding
2016-01-27 5:20 ` Archit Taneja
2015-12-10 12:41 ` [PATCH v4 6/6] drm/dsi: Get DSI host by DT device node Archit Taneja
2015-12-10 12:41 ` Archit Taneja
2016-01-21 16:16 ` Thierry Reding
2016-01-21 16:16 ` Thierry Reding
2016-01-27 5:21 ` Archit Taneja
2016-01-27 5:21 ` Archit Taneja
2016-01-05 5:29 ` [PATCH v4 0/6] drm/dsi: DSI for devices with different control bus Archit Taneja
2016-02-12 9:18 ` [PATCH v5 0/5] " Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-02-12 9:18 ` [PATCH v5 1/5] drm/dsi: check for CONFIG_OF when defining of_mipi_dsi_device_add Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-02-12 9:18 ` [PATCH v5 2/5] drm/dsi: Use mipi_dsi_device_register_full for DSI device creation Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-02-12 9:18 ` [PATCH v5 3/5] drm/dsi: Try to match non-DT DSI devices Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-02-12 9:18 ` [PATCH v5 4/5] drm/dsi: Add routine to unregister a DSI device Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-02-12 9:18 ` [PATCH v5 5/5] drm/dsi: Get DSI host by DT device node Archit Taneja
2016-02-12 9:18 ` Archit Taneja
2016-03-02 16:05 ` Thierry Reding [this message]
2016-03-02 16:05 ` [PATCH v5 0/5] drm/dsi: DSI for devices with different control bus Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160302160553.GA21529@ulmo.nvidia.com \
--to=treding@nvidia.com \
--cc=a.hajda@samsung.com \
--cc=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.