From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH 10/11] ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC
Date: Fri, 14 Jul 2017 14:43:01 +0800 [thread overview]
Message-ID: <20170714064302.20383-11-wens@csie.org> (raw)
In-Reply-To: <20170714064302.20383-1-wens@csie.org>
Now that we support the MMC controllers on the A83T SoC, we can enable
them on some boards.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc24..163ddf8868b5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -83,6 +83,13 @@
};
};
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +109,26 @@
};
};
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
&spdif {
status = "okay";
};
--
2.13.2
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH 10/11] ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC
Date: Fri, 14 Jul 2017 14:43:01 +0800 [thread overview]
Message-ID: <20170714064302.20383-11-wens@csie.org> (raw)
In-Reply-To: <20170714064302.20383-1-wens-jdAy2FN1RRM@public.gmane.org>
Now that we support the MMC controllers on the A83T SoC, we can enable
them on some boards.
Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc24..163ddf8868b5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -83,6 +83,13 @@
};
};
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +109,26 @@
};
};
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
&spdif {
status = "okay";
};
--
2.13.2
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/11] ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC
Date: Fri, 14 Jul 2017 14:43:01 +0800 [thread overview]
Message-ID: <20170714064302.20383-11-wens@csie.org> (raw)
In-Reply-To: <20170714064302.20383-1-wens@csie.org>
Now that we support the MMC controllers on the A83T SoC, we can enable
them on some boards.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 27 ++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index cff33454fc24..163ddf8868b5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -83,6 +83,13 @@
};
};
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -102,6 +109,26 @@
};
};
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
&spdif {
status = "okay";
};
--
2.13.2
next prev parent reply other threads:[~2017-07-14 6:44 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-14 6:42 [PATCH 00/11] ARM: sun8i: a83t: Add support for MMC controllers Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` [PATCH 01/11] ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-17 9:06 ` Maxime Ripard
2017-07-17 9:06 ` Maxime Ripard
2017-07-17 9:06 ` Maxime Ripard
2017-07-14 6:42 ` [PATCH 02/11] clk: sunxi-ng: Add interface to query or configure MMC timing modes Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-17 9:09 ` Maxime Ripard
2017-07-17 9:09 ` Maxime Ripard
2017-07-17 9:09 ` Maxime Ripard
2017-07-14 6:42 ` [PATCH 03/11] clk: sunxi-ng: a83t: Support new timing mode for mmc2 clock Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 10:12 ` Chen-Yu Tsai
2017-07-17 10:12 ` Chen-Yu Tsai
2017-07-17 10:12 ` Chen-Yu Tsai
2017-07-18 14:47 ` Maxime Ripard
2017-07-18 14:47 ` Maxime Ripard
2017-07-14 6:42 ` [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for new timing mode Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 9:16 ` Ulf Hansson
2017-07-14 9:16 ` Ulf Hansson
2017-07-14 9:16 ` Ulf Hansson
2017-07-14 9:16 ` Ulf Hansson
2017-07-14 9:44 ` Chen-Yu Tsai
2017-07-14 9:44 ` Chen-Yu Tsai
2017-07-14 9:44 ` Chen-Yu Tsai
2017-07-14 9:44 ` Chen-Yu Tsai
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 9:14 ` Maxime Ripard
2017-07-17 10:37 ` Ulf Hansson
2017-07-17 10:37 ` Ulf Hansson
2017-07-17 10:37 ` Ulf Hansson
2017-07-17 10:37 ` Ulf Hansson
2017-07-14 6:42 ` [PATCH 05/11] mmc: sunxi: Support controllers that can use both old and new timings Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 9:26 ` Ulf Hansson
2017-07-14 9:26 ` Ulf Hansson
2017-07-14 9:26 ` Ulf Hansson
2017-07-14 9:26 ` Ulf Hansson
2017-07-14 9:40 ` Chen-Yu Tsai
2017-07-14 9:40 ` Chen-Yu Tsai
2017-07-14 9:40 ` Chen-Yu Tsai
2017-07-14 9:40 ` Chen-Yu Tsai
2017-07-14 9:57 ` Ulf Hansson
2017-07-14 9:57 ` Ulf Hansson
2017-07-14 9:57 ` Ulf Hansson
2017-07-17 9:20 ` Maxime Ripard
2017-07-17 9:20 ` Maxime Ripard
2017-07-17 9:20 ` Maxime Ripard
2017-07-17 9:20 ` Maxime Ripard
2017-07-17 9:17 ` Maxime Ripard
2017-07-17 9:17 ` Maxime Ripard
2017-07-17 9:17 ` Maxime Ripard
2017-07-19 8:59 ` Chen-Yu Tsai
2017-07-19 8:59 ` Chen-Yu Tsai
2017-07-19 8:59 ` Chen-Yu Tsai
2017-07-19 11:28 ` Maxime Ripard
2017-07-19 11:28 ` Maxime Ripard
2017-07-19 11:28 ` Maxime Ripard
2017-07-17 13:10 ` kbuild test robot
2017-07-17 13:10 ` kbuild test robot
2017-07-17 13:10 ` kbuild test robot
2017-07-14 6:42 ` [PATCH 06/11] mmc: sunxi: Support MMC DDR52 transfer mode with new timing mode Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` [PATCH 07/11] mmc: sunxi: Add support for A83T eMMC (MMC2) Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-17 18:51 ` Rob Herring
2017-07-17 18:51 ` Rob Herring
2017-07-14 6:42 ` [PATCH 08/11] ARM: dts: sun8i: a83t: Add MMC controller device nodes Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-14 6:42 ` Chen-Yu Tsai
2017-07-17 9:22 ` Maxime Ripard
2017-07-17 9:22 ` Maxime Ripard
2017-07-17 9:22 ` Maxime Ripard
2017-07-14 6:43 ` [PATCH 09/11] ARM: dts: sun8i: a83t: Add pingroup for 8-bit eMMC on mmc2 Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai [this message]
2017-07-14 6:43 ` [PATCH 10/11] ARM: dts: sun8i: a83t: cubietruck-plus: Enable micro-SD card and eMMC Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai
2017-07-14 6:43 ` [PATCH 11/11] ARM: dts: sun8i: a83t: h8homlet: Enable micro-SD card and onboard eMMC Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai
2017-07-14 6:43 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170714064302.20383-11-wens@csie.org \
--to=wens@csie.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.