All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	linux-mmc@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 03/13] mmc: meson-gx: rework set_ios function
Date: Mon, 28 Aug 2017 16:29:05 +0200	[thread overview]
Message-ID: <20170828142915.27020-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>

Remove conditional write of cfg register. Warn if set_clk fails for some
reason. Consistently use host->dev instead of mixing with mmc_dev(mmc)

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 7d14d382cb1c..0d29f1f347eb 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -444,8 +444,8 @@ static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
 static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct meson_host *host = mmc_priv(mmc);
-	u32 bus_width;
-	u32 val, orig;
+	u32 bus_width, val;
+	int err;
 
 	/*
 	 * GPIO regulator, only controls switching between 1v8 and
@@ -473,7 +473,7 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			int ret = regulator_enable(mmc->supply.vqmmc);
 
 			if (ret < 0)
-				dev_err(mmc_dev(mmc),
+				dev_err(host->dev,
 					"failed to enable vqmmc regulator\n");
 			else
 				host->vqmmc_enabled = true;
@@ -482,9 +482,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	}
 
-
-	meson_mmc_clk_set(host, ios->clock);
-
 	/* Bus width */
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
@@ -503,8 +500,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	val = readl(host->regs + SD_EMMC_CFG);
-	orig = val;
-
 	val &= ~CFG_BUS_WIDTH_MASK;
 	val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
 
@@ -518,11 +513,12 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS400)
 		val |= CFG_CHK_DS;
 
-	if (val != orig) {
-		writel(val, host->regs + SD_EMMC_CFG);
-		dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
-			__func__, orig, val);
-	}
+	err = meson_mmc_clk_set(host, ios->clock);
+	if (err)
+		dev_err(host->dev, "Failed to set clock: %d\n,", err);
+
+	writel(val, host->regs + SD_EMMC_CFG);
+	dev_dbg(host->dev, "SD_EMMC_CFG:  0x%08x\n", val);
 }
 
 static void meson_mmc_request_done(struct mmc_host *mmc,
-- 
2.9.5

WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 03/13] mmc: meson-gx: rework set_ios function
Date: Mon, 28 Aug 2017 16:29:05 +0200	[thread overview]
Message-ID: <20170828142915.27020-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>

Remove conditional write of cfg register. Warn if set_clk fails for some
reason. Consistently use host->dev instead of mixing with mmc_dev(mmc)

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 7d14d382cb1c..0d29f1f347eb 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -444,8 +444,8 @@ static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
 static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct meson_host *host = mmc_priv(mmc);
-	u32 bus_width;
-	u32 val, orig;
+	u32 bus_width, val;
+	int err;
 
 	/*
 	 * GPIO regulator, only controls switching between 1v8 and
@@ -473,7 +473,7 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			int ret = regulator_enable(mmc->supply.vqmmc);
 
 			if (ret < 0)
-				dev_err(mmc_dev(mmc),
+				dev_err(host->dev,
 					"failed to enable vqmmc regulator\n");
 			else
 				host->vqmmc_enabled = true;
@@ -482,9 +482,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	}
 
-
-	meson_mmc_clk_set(host, ios->clock);
-
 	/* Bus width */
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
@@ -503,8 +500,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	val = readl(host->regs + SD_EMMC_CFG);
-	orig = val;
-
 	val &= ~CFG_BUS_WIDTH_MASK;
 	val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
 
@@ -518,11 +513,12 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS400)
 		val |= CFG_CHK_DS;
 
-	if (val != orig) {
-		writel(val, host->regs + SD_EMMC_CFG);
-		dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
-			__func__, orig, val);
-	}
+	err = meson_mmc_clk_set(host, ios->clock);
+	if (err)
+		dev_err(host->dev, "Failed to set clock: %d\n,", err);
+
+	writel(val, host->regs + SD_EMMC_CFG);
+	dev_dbg(host->dev, "SD_EMMC_CFG:  0x%08x\n", val);
 }
 
 static void meson_mmc_request_done(struct mmc_host *mmc,
-- 
2.9.5

WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 03/13] mmc: meson-gx: rework set_ios function
Date: Mon, 28 Aug 2017 16:29:05 +0200	[thread overview]
Message-ID: <20170828142915.27020-4-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>

Remove conditional write of cfg register. Warn if set_clk fails for some
reason. Consistently use host->dev instead of mixing with mmc_dev(mmc)

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/mmc/host/meson-gx-mmc.c | 22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 7d14d382cb1c..0d29f1f347eb 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -444,8 +444,8 @@ static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
 static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct meson_host *host = mmc_priv(mmc);
-	u32 bus_width;
-	u32 val, orig;
+	u32 bus_width, val;
+	int err;
 
 	/*
 	 * GPIO regulator, only controls switching between 1v8 and
@@ -473,7 +473,7 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			int ret = regulator_enable(mmc->supply.vqmmc);
 
 			if (ret < 0)
-				dev_err(mmc_dev(mmc),
+				dev_err(host->dev,
 					"failed to enable vqmmc regulator\n");
 			else
 				host->vqmmc_enabled = true;
@@ -482,9 +482,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	}
 
-
-	meson_mmc_clk_set(host, ios->clock);
-
 	/* Bus width */
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_1:
@@ -503,8 +500,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	val = readl(host->regs + SD_EMMC_CFG);
-	orig = val;
-
 	val &= ~CFG_BUS_WIDTH_MASK;
 	val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
 
@@ -518,11 +513,12 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (ios->timing == MMC_TIMING_MMC_HS400)
 		val |= CFG_CHK_DS;
 
-	if (val != orig) {
-		writel(val, host->regs + SD_EMMC_CFG);
-		dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
-			__func__, orig, val);
-	}
+	err = meson_mmc_clk_set(host, ios->clock);
+	if (err)
+		dev_err(host->dev, "Failed to set clock: %d\n,", err);
+
+	writel(val, host->regs + SD_EMMC_CFG);
+	dev_dbg(host->dev, "SD_EMMC_CFG:  0x%08x\n", val);
 }
 
 static void meson_mmc_request_done(struct mmc_host *mmc,
-- 
2.9.5

  parent reply	other threads:[~2017-08-28 14:29 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-28 14:29 [PATCH v3 00/13] mmc: meson-gx: driver fixups and upgrades Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 01/13] mmc: meson-gx: initialize sane clk default before clock register Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 02/13] mmc: meson-gx: cfg init overwrite values Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet [this message]
2017-08-28 14:29   ` [PATCH v3 03/13] mmc: meson-gx: rework set_ios function Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 04/13] mmc: meson-gx: rework clk_set function Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 05/13] mmc: meson-gx: rework clock init function Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 06/13] mmc: meson-gx: fix dual data rate mode frequencies Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 07/13] mmc: meson-gx: work around clk-stop issue Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 08/13] mmc: meson-gx: simplify interrupt handler Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 09/13] mmc: meson-gx: implement card_busy callback Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 10/13] mmc: meson-gx: use CCF to handle the clock phases Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 11/13] mmc: meson-gx: implement voltage switch callback Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 12/13] mmc: meson-gx: change default tx phase Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 13/13] mmc: meson-gx: rework tuning function Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-28 14:29   ` Jerome Brunet
2017-08-30 13:13 ` [PATCH v3 00/13] mmc: meson-gx: driver fixups and upgrades Ulf Hansson
2017-08-30 13:13   ` Ulf Hansson
2017-08-30 13:13   ` Ulf Hansson
2017-08-30 13:13   ` Ulf Hansson
2017-08-30 19:03   ` Kevin Hilman
2017-08-30 19:03     ` Kevin Hilman
2017-08-30 19:03     ` Kevin Hilman
2017-08-30 19:03     ` Kevin Hilman
2017-08-31 10:46     ` Ulf Hansson
2017-08-31 10:46       ` Ulf Hansson
2017-08-31 10:46       ` Ulf Hansson
2017-08-31 10:46       ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170828142915.27020-4-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=carlo@caione.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.