From: Jerome Brunet <jbrunet@baylibre.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-mmc@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 05/13] mmc: meson-gx: rework clock init function
Date: Mon, 28 Aug 2017 16:29:07 +0200 [thread overview]
Message-ID: <20170828142915.27020-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>
Thanks to devm, carrying the clock structure around after init is not
necessary. Rework the function to remove these from the controller host
data.
Finally, set initial mmc clock rate before enabling it, simplifying the
exit condition.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 94 ++++++++++++++++++++---------------------
1 file changed, 46 insertions(+), 48 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index cd5964aa4f58..7800a7ace2de 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -42,10 +42,7 @@
#define SD_EMMC_CLOCK 0x0
#define CLK_DIV_MASK GENMASK(5, 0)
-#define CLK_DIV_MAX 63
#define CLK_SRC_MASK GENMASK(7, 6)
-#define CLK_SRC_XTAL 0 /* external crystal */
-#define CLK_SRC_PLL 1 /* FCLK_DIV2 */
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
@@ -137,13 +134,9 @@ struct meson_host {
spinlock_t lock;
void __iomem *regs;
struct clk *core_clk;
- struct clk_mux mux;
- struct clk *mux_clk;
+ struct clk *mmc_clk;
unsigned long req_rate;
- struct clk_divider cfg_div;
- struct clk *cfg_div_clk;
-
unsigned int bounce_buf_size;
void *bounce_buf;
dma_addr_t bounce_dma_addr;
@@ -291,7 +284,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
return 0;
}
- ret = clk_set_rate(host->cfg_div_clk, clk_rate);
+ ret = clk_set_rate(host->mmc_clk, clk_rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
clk_rate, ret);
@@ -299,7 +292,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
}
host->req_rate = clk_rate;
- mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
+ mmc->actual_clock = clk_get_rate(host->mmc_clk);
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
if (clk_rate != mmc->actual_clock)
@@ -321,10 +314,13 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
static int meson_mmc_clk_init(struct meson_host *host)
{
struct clk_init_data init;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ struct clk *clk;
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
- const char *clk_div_parents[1];
+ const char *clk_parent[1];
u32 clk_reg;
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
@@ -353,55 +349,57 @@ static int meson_mmc_clk_init(struct meson_host *host)
}
/* create the mux */
+ mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
- host->mux.reg = host->regs + SD_EMMC_CLOCK;
- host->mux.shift = __bf_shf(CLK_SRC_MASK);
- host->mux.mask = CLK_SRC_MASK >> host->mux.shift;
- host->mux.flags = 0;
- host->mux.table = NULL;
- host->mux.hw.init = &init;
- host->mux_clk = devm_clk_register(host->dev, &host->mux.hw);
- if (WARN_ON(IS_ERR(host->mux_clk)))
- return PTR_ERR(host->mux_clk);
+ mux->reg = host->regs + SD_EMMC_CLOCK;
+ mux->shift = __bf_shf(CLK_SRC_MASK);
+ mux->mask = CLK_SRC_MASK >> mux->shift;
+ mux->hw.init = &init;
+
+ clk = devm_clk_register(host->dev, &mux->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return PTR_ERR(clk);
/* create the divider */
+ div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
- clk_div_parents[0] = __clk_get_name(host->mux_clk);
- init.parent_names = clk_div_parents;
- init.num_parents = ARRAY_SIZE(clk_div_parents);
-
- host->cfg_div.reg = host->regs + SD_EMMC_CLOCK;
- host->cfg_div.shift = __bf_shf(CLK_DIV_MASK);
- host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK);
- host->cfg_div.hw.init = &init;
- host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ROUND_CLOSEST;
-
- host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
- if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
- return PTR_ERR(host->cfg_div_clk);
-
- ret = clk_prepare_enable(host->cfg_div_clk);
- if (ret)
- return ret;
+ clk_parent[0] = __clk_get_name(clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ div->reg = host->regs + SD_EMMC_CLOCK;
+ div->shift = __bf_shf(CLK_DIV_MASK);
+ div->width = __builtin_popcountl(CLK_DIV_MASK);
+ div->hw.init = &init;
+ div->flags = (CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ROUND_CLOSEST);
- /* Get the nearest minimum clock to 400KHz */
- host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
+ host->mmc_clk = devm_clk_register(host->dev, &div->hw);
+ if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
+ return PTR_ERR(host->mmc_clk);
- ret = meson_mmc_clk_set(host, host->mmc->f_min);
+ /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
+ host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
+ ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
if (ret)
- clk_disable_unprepare(host->cfg_div_clk);
+ return ret;
- return ret;
+ return clk_prepare_enable(host->mmc_clk);
}
static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
@@ -949,7 +947,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
meson_mmc_irq_thread, IRQF_SHARED,
NULL, host);
if (ret)
- goto err_div_clk;
+ goto err_init_clk;
mmc->caps |= MMC_CAP_CMD23;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
@@ -965,7 +963,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
- goto err_div_clk;
+ goto err_init_clk;
}
host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
@@ -984,8 +982,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
err_bounce_buf:
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
-err_div_clk:
- clk_disable_unprepare(host->cfg_div_clk);
+err_init_clk:
+ clk_disable_unprepare(host->mmc_clk);
err_core_clk:
clk_disable_unprepare(host->core_clk);
free_host:
@@ -1007,7 +1005,7 @@ static int meson_mmc_remove(struct platform_device *pdev)
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
- clk_disable_unprepare(host->cfg_div_clk);
+ clk_disable_unprepare(host->mmc_clk);
clk_disable_unprepare(host->core_clk);
mmc_free_host(host->mmc);
--
2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 05/13] mmc: meson-gx: rework clock init function
Date: Mon, 28 Aug 2017 16:29:07 +0200 [thread overview]
Message-ID: <20170828142915.27020-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>
Thanks to devm, carrying the clock structure around after init is not
necessary. Rework the function to remove these from the controller host
data.
Finally, set initial mmc clock rate before enabling it, simplifying the
exit condition.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 94 ++++++++++++++++++++---------------------
1 file changed, 46 insertions(+), 48 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index cd5964aa4f58..7800a7ace2de 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -42,10 +42,7 @@
#define SD_EMMC_CLOCK 0x0
#define CLK_DIV_MASK GENMASK(5, 0)
-#define CLK_DIV_MAX 63
#define CLK_SRC_MASK GENMASK(7, 6)
-#define CLK_SRC_XTAL 0 /* external crystal */
-#define CLK_SRC_PLL 1 /* FCLK_DIV2 */
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
@@ -137,13 +134,9 @@ struct meson_host {
spinlock_t lock;
void __iomem *regs;
struct clk *core_clk;
- struct clk_mux mux;
- struct clk *mux_clk;
+ struct clk *mmc_clk;
unsigned long req_rate;
- struct clk_divider cfg_div;
- struct clk *cfg_div_clk;
-
unsigned int bounce_buf_size;
void *bounce_buf;
dma_addr_t bounce_dma_addr;
@@ -291,7 +284,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
return 0;
}
- ret = clk_set_rate(host->cfg_div_clk, clk_rate);
+ ret = clk_set_rate(host->mmc_clk, clk_rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
clk_rate, ret);
@@ -299,7 +292,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
}
host->req_rate = clk_rate;
- mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
+ mmc->actual_clock = clk_get_rate(host->mmc_clk);
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
if (clk_rate != mmc->actual_clock)
@@ -321,10 +314,13 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
static int meson_mmc_clk_init(struct meson_host *host)
{
struct clk_init_data init;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ struct clk *clk;
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
- const char *clk_div_parents[1];
+ const char *clk_parent[1];
u32 clk_reg;
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
@@ -353,55 +349,57 @@ static int meson_mmc_clk_init(struct meson_host *host)
}
/* create the mux */
+ mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
- host->mux.reg = host->regs + SD_EMMC_CLOCK;
- host->mux.shift = __bf_shf(CLK_SRC_MASK);
- host->mux.mask = CLK_SRC_MASK >> host->mux.shift;
- host->mux.flags = 0;
- host->mux.table = NULL;
- host->mux.hw.init = &init;
- host->mux_clk = devm_clk_register(host->dev, &host->mux.hw);
- if (WARN_ON(IS_ERR(host->mux_clk)))
- return PTR_ERR(host->mux_clk);
+ mux->reg = host->regs + SD_EMMC_CLOCK;
+ mux->shift = __bf_shf(CLK_SRC_MASK);
+ mux->mask = CLK_SRC_MASK >> mux->shift;
+ mux->hw.init = &init;
+
+ clk = devm_clk_register(host->dev, &mux->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return PTR_ERR(clk);
/* create the divider */
+ div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
- clk_div_parents[0] = __clk_get_name(host->mux_clk);
- init.parent_names = clk_div_parents;
- init.num_parents = ARRAY_SIZE(clk_div_parents);
-
- host->cfg_div.reg = host->regs + SD_EMMC_CLOCK;
- host->cfg_div.shift = __bf_shf(CLK_DIV_MASK);
- host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK);
- host->cfg_div.hw.init = &init;
- host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ROUND_CLOSEST;
-
- host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
- if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
- return PTR_ERR(host->cfg_div_clk);
-
- ret = clk_prepare_enable(host->cfg_div_clk);
- if (ret)
- return ret;
+ clk_parent[0] = __clk_get_name(clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ div->reg = host->regs + SD_EMMC_CLOCK;
+ div->shift = __bf_shf(CLK_DIV_MASK);
+ div->width = __builtin_popcountl(CLK_DIV_MASK);
+ div->hw.init = &init;
+ div->flags = (CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ROUND_CLOSEST);
- /* Get the nearest minimum clock to 400KHz */
- host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
+ host->mmc_clk = devm_clk_register(host->dev, &div->hw);
+ if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
+ return PTR_ERR(host->mmc_clk);
- ret = meson_mmc_clk_set(host, host->mmc->f_min);
+ /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
+ host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
+ ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
if (ret)
- clk_disable_unprepare(host->cfg_div_clk);
+ return ret;
- return ret;
+ return clk_prepare_enable(host->mmc_clk);
}
static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
@@ -949,7 +947,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
meson_mmc_irq_thread, IRQF_SHARED,
NULL, host);
if (ret)
- goto err_div_clk;
+ goto err_init_clk;
mmc->caps |= MMC_CAP_CMD23;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
@@ -965,7 +963,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
- goto err_div_clk;
+ goto err_init_clk;
}
host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
@@ -984,8 +982,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
err_bounce_buf:
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
-err_div_clk:
- clk_disable_unprepare(host->cfg_div_clk);
+err_init_clk:
+ clk_disable_unprepare(host->mmc_clk);
err_core_clk:
clk_disable_unprepare(host->core_clk);
free_host:
@@ -1007,7 +1005,7 @@ static int meson_mmc_remove(struct platform_device *pdev)
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
- clk_disable_unprepare(host->cfg_div_clk);
+ clk_disable_unprepare(host->mmc_clk);
clk_disable_unprepare(host->core_clk);
mmc_free_host(host->mmc);
--
2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 05/13] mmc: meson-gx: rework clock init function
Date: Mon, 28 Aug 2017 16:29:07 +0200 [thread overview]
Message-ID: <20170828142915.27020-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170828142915.27020-1-jbrunet@baylibre.com>
Thanks to devm, carrying the clock structure around after init is not
necessary. Rework the function to remove these from the controller host
data.
Finally, set initial mmc clock rate before enabling it, simplifying the
exit condition.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 94 ++++++++++++++++++++---------------------
1 file changed, 46 insertions(+), 48 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index cd5964aa4f58..7800a7ace2de 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -42,10 +42,7 @@
#define SD_EMMC_CLOCK 0x0
#define CLK_DIV_MASK GENMASK(5, 0)
-#define CLK_DIV_MAX 63
#define CLK_SRC_MASK GENMASK(7, 6)
-#define CLK_SRC_XTAL 0 /* external crystal */
-#define CLK_SRC_PLL 1 /* FCLK_DIV2 */
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
@@ -137,13 +134,9 @@ struct meson_host {
spinlock_t lock;
void __iomem *regs;
struct clk *core_clk;
- struct clk_mux mux;
- struct clk *mux_clk;
+ struct clk *mmc_clk;
unsigned long req_rate;
- struct clk_divider cfg_div;
- struct clk *cfg_div_clk;
-
unsigned int bounce_buf_size;
void *bounce_buf;
dma_addr_t bounce_dma_addr;
@@ -291,7 +284,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
return 0;
}
- ret = clk_set_rate(host->cfg_div_clk, clk_rate);
+ ret = clk_set_rate(host->mmc_clk, clk_rate);
if (ret) {
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
clk_rate, ret);
@@ -299,7 +292,7 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
}
host->req_rate = clk_rate;
- mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
+ mmc->actual_clock = clk_get_rate(host->mmc_clk);
dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
if (clk_rate != mmc->actual_clock)
@@ -321,10 +314,13 @@ static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
static int meson_mmc_clk_init(struct meson_host *host)
{
struct clk_init_data init;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ struct clk *clk;
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
- const char *clk_div_parents[1];
+ const char *clk_parent[1];
u32 clk_reg;
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
@@ -353,55 +349,57 @@ static int meson_mmc_clk_init(struct meson_host *host)
}
/* create the mux */
+ mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
- host->mux.reg = host->regs + SD_EMMC_CLOCK;
- host->mux.shift = __bf_shf(CLK_SRC_MASK);
- host->mux.mask = CLK_SRC_MASK >> host->mux.shift;
- host->mux.flags = 0;
- host->mux.table = NULL;
- host->mux.hw.init = &init;
- host->mux_clk = devm_clk_register(host->dev, &host->mux.hw);
- if (WARN_ON(IS_ERR(host->mux_clk)))
- return PTR_ERR(host->mux_clk);
+ mux->reg = host->regs + SD_EMMC_CLOCK;
+ mux->shift = __bf_shf(CLK_SRC_MASK);
+ mux->mask = CLK_SRC_MASK >> mux->shift;
+ mux->hw.init = &init;
+
+ clk = devm_clk_register(host->dev, &mux->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return PTR_ERR(clk);
/* create the divider */
+ div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
- clk_div_parents[0] = __clk_get_name(host->mux_clk);
- init.parent_names = clk_div_parents;
- init.num_parents = ARRAY_SIZE(clk_div_parents);
-
- host->cfg_div.reg = host->regs + SD_EMMC_CLOCK;
- host->cfg_div.shift = __bf_shf(CLK_DIV_MASK);
- host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK);
- host->cfg_div.hw.init = &init;
- host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ROUND_CLOSEST;
-
- host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
- if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
- return PTR_ERR(host->cfg_div_clk);
-
- ret = clk_prepare_enable(host->cfg_div_clk);
- if (ret)
- return ret;
+ clk_parent[0] = __clk_get_name(clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ div->reg = host->regs + SD_EMMC_CLOCK;
+ div->shift = __bf_shf(CLK_DIV_MASK);
+ div->width = __builtin_popcountl(CLK_DIV_MASK);
+ div->hw.init = &init;
+ div->flags = (CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ROUND_CLOSEST);
- /* Get the nearest minimum clock to 400KHz */
- host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
+ host->mmc_clk = devm_clk_register(host->dev, &div->hw);
+ if (WARN_ON(PTR_ERR_OR_ZERO(host->mmc_clk)))
+ return PTR_ERR(host->mmc_clk);
- ret = meson_mmc_clk_set(host, host->mmc->f_min);
+ /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
+ host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
+ ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
if (ret)
- clk_disable_unprepare(host->cfg_div_clk);
+ return ret;
- return ret;
+ return clk_prepare_enable(host->mmc_clk);
}
static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
@@ -949,7 +947,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
meson_mmc_irq_thread, IRQF_SHARED,
NULL, host);
if (ret)
- goto err_div_clk;
+ goto err_init_clk;
mmc->caps |= MMC_CAP_CMD23;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
@@ -965,7 +963,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
- goto err_div_clk;
+ goto err_init_clk;
}
host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
@@ -984,8 +982,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
err_bounce_buf:
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
-err_div_clk:
- clk_disable_unprepare(host->cfg_div_clk);
+err_init_clk:
+ clk_disable_unprepare(host->mmc_clk);
err_core_clk:
clk_disable_unprepare(host->core_clk);
free_host:
@@ -1007,7 +1005,7 @@ static int meson_mmc_remove(struct platform_device *pdev)
dma_free_coherent(host->dev, host->bounce_buf_size,
host->bounce_buf, host->bounce_dma_addr);
- clk_disable_unprepare(host->cfg_div_clk);
+ clk_disable_unprepare(host->mmc_clk);
clk_disable_unprepare(host->core_clk);
mmc_free_host(host->mmc);
--
2.9.5
next prev parent reply other threads:[~2017-08-28 14:31 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-28 14:29 [PATCH v3 00/13] mmc: meson-gx: driver fixups and upgrades Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 01/13] mmc: meson-gx: initialize sane clk default before clock register Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 02/13] mmc: meson-gx: cfg init overwrite values Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 03/13] mmc: meson-gx: rework set_ios function Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 04/13] mmc: meson-gx: rework clk_set function Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet [this message]
2017-08-28 14:29 ` [PATCH v3 05/13] mmc: meson-gx: rework clock init function Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 06/13] mmc: meson-gx: fix dual data rate mode frequencies Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 07/13] mmc: meson-gx: work around clk-stop issue Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 08/13] mmc: meson-gx: simplify interrupt handler Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 09/13] mmc: meson-gx: implement card_busy callback Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 10/13] mmc: meson-gx: use CCF to handle the clock phases Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 11/13] mmc: meson-gx: implement voltage switch callback Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 12/13] mmc: meson-gx: change default tx phase Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` [PATCH v3 13/13] mmc: meson-gx: rework tuning function Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-28 14:29 ` Jerome Brunet
2017-08-30 13:13 ` [PATCH v3 00/13] mmc: meson-gx: driver fixups and upgrades Ulf Hansson
2017-08-30 13:13 ` Ulf Hansson
2017-08-30 13:13 ` Ulf Hansson
2017-08-30 13:13 ` Ulf Hansson
2017-08-30 19:03 ` Kevin Hilman
2017-08-30 19:03 ` Kevin Hilman
2017-08-30 19:03 ` Kevin Hilman
2017-08-30 19:03 ` Kevin Hilman
2017-08-31 10:46 ` Ulf Hansson
2017-08-31 10:46 ` Ulf Hansson
2017-08-31 10:46 ` Ulf Hansson
2017-08-31 10:46 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170828142915.27020-6-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.