From: Tony Lindgren <tony@atomide.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pavel Machek <pavel@ucw.cz>,
pali.rohar@gmail.com, sre@kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com, abcloriens@gmail.com,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Vlastimil Babka <vbabka@suse.cz>,
Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Russell King <linux@armlinux.org.uk>
Subject: Re: n900 in next-20170901
Date: Thu, 21 Sep 2017 10:28:11 -0700 [thread overview]
Message-ID: <20170921172811.GB4394@atomide.com> (raw)
In-Reply-To: <20170915065608.GA8567@js1304-P5Q-DELUXE>
* Joonsoo Kim <iamjoonsoo.kim@lge.com> [170914 23:55]:
> On Wed, Sep 13, 2017 at 09:31:27AM -0700, Tony Lindgren wrote:
> > Yes I disabled CONFIG_HIGHMEM and n900 boots. To disable it,
> > you need to remove it from arch/arm/mach-omap2/Kconfig that
> > selects it if ARCH_OMAP2PLUS_TYPICAL is selected.
>
> Okay. Problem would be related to address traslation. I'd like to
> check address traslation more. Could you apply following patch and
> test it? And, please send me the dmesg log and your kernel config.
> Please test this with CONFIG_DEBUG_VIRTUAL = n and CONFIG_CMA_DEBUG=y and
> CONFIG_HIGHMEM=y and with kernel bootparam 'ignore_loglevel'.
>
> It would be really appreciate if you send me two logs for before/after
> commit 9caf25f996e8.
Sorry for the delays, I finally got around testing this for you.
Compile with your patch failed for modules with __virt_to_phys_debug
being undefined so I added EXPORT_SYMBOL there. I also enabled DEBUG_LL
and EARLYPRINTK to get output.
Below is dmesg output for 9caf25f996e8 + your patch. I'll send you
the full logs separately.
Regards,
Tony
8< -----------------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.13.0-rc7-00246-g9caf25f996e8-dirty (tmlind@sampyla) (gcc version 6.2.0 (crosstool-NG crosstool-ng-1.22.0-248-gdf5a341)) #416 SMP Thu Sep 21 10:04:29 PDT 2017
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Nokia N900
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: dma_contiguous_reserve(limit ffffffff)
[ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x01000000, base 0x00000000, limit 0xffffffff alignment 0x00000000)
[ 0.000000] cma: Reserved 16 MiB at 0x8e800000
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f14>] (dma_contiguous_remap+0x68/0x138)
[ 0.000000] [<c0c06f14>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f3c>] (dma_contiguous_remap+0x90/0x138)
[ 0.000000] [<c0c06f3c>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f9c>] (dma_contiguous_remap+0xf0/0x138)
[ 0.000000] [<c0c06f9c>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] On node 0 totalpages: 65024
[ 0.000000] free_area_init_node: node 0, pgdat c0dc22c0, node_mem_map cfa8b000
[ 0.000000] Normal zone: 572 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
[ 0.000000] percpu: Embedded 18 pages/cpu @cfd94000 s41000 r8192 d24536 u73728
[ 0.000000] pcpu-alloc: s41000 r8192 d24536 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64452
[ 0.000000] Kernel command line: root=/dev/nfs ip=dhcp console=ttyO2,115200 memmap=2M$0x88000000 ramoops.mem_address=0x88000000 ramoops.mem_size=0x200000 ramoops.record_size=0x40000 debug earlyprintk init=/root/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 219536K/260096K available (8192K kernel code, 805K rwdata, 2388K rodata, 1024K init, 8058K bss, 24176K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0000000 - 0xff800000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB)
[ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB)
[ 0.000000] .data : 0xc0d00000 - 0xc0dc9430 ( 806 kB)
[ 0.000000] .bss : 0xc0dcb000 - 0xc15a9a4c (8059 kB)
[ 0.000000] Running RCU self tests
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.008697] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.017150] Console: colour dummy device 80x30
[ 0.021972] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.030120] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.034454] ... MAX_LOCK_DEPTH: 48
[ 0.038848] ... MAX_LOCKDEP_KEYS: 8191
[ 0.043518] ... CLASSHASH_SIZE: 4096
[ 0.048095] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.052825] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.057525] ... CHAINHASH_SIZE: 32768
[ 0.062255] memory used by lock dependency info: 5167 kB
[ 0.067932] per task-struct memory footprint: 1536 bytes
[ 0.073669] Calibrating delay loop... 493.97 BogoMIPS (lpj=2469888)
[ 0.135528] pid_max: default: 32768 minimum: 301
[ 0.141265] Security Framework initialized
[ 0.145843] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.152893] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.166473] CPU: Testing write buffer coherency: ok
[ 0.174652] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.183135] Setting up static identity map for 0x80100000 - 0x80100078
[ 0.191253] Hierarchical SRCU implementation.
[ 0.199310] smp: Bringing up secondary CPUs ...
[ 0.204101] smp: Brought up 1 node, 1 CPU
[ 0.208343] SMP: Total of 1 processors activated (493.97 BogoMIPS).
[ 0.214996] CPU: All CPU(s) started in SVC mode.
[ 0.227752] devtmpfs: initialized
[ 0.344909] Built 1 zonelists, mobility grouping on. Total pages: 58980
[ 0.353942] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 0.363677] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.374145] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.381561] pinctrl core: initialized pinctrl subsystem
[ 0.394714] random: get_random_u32 called from bucket_table_alloc+0xdc/0x264 with crng_init=0
[ 0.405181] NET: Registered protocol family 16
[ 0.410919] __alloc_from_contiguous
[ 0.414642] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.423706] Hardware name: Nokia RX-51 board
[ 0.428222] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.436309] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.443878] [<c081efe8>] (dump_stack) from [<c01161c4>] (__alloc_from_contiguous+0x30/0xf8)
[ 0.452606] [<c01161c4>] (__alloc_from_contiguous) from [<c0c06d60>] (atomic_pool_init+0x7c/0x178)
[ 0.461944] [<c0c06d60>] (atomic_pool_init) from [<c0101918>] (do_one_initcall+0x3c/0x170)
[ 0.470550] [<c0101918>] (do_one_initcall) from [<c0c00ecc>] (kernel_init_freeable+0x1fc/0x2c4)
[ 0.479644] [<c0c00ecc>] (kernel_init_freeable) from [<c08328e4>] (kernel_init+0x8/0x110)
[ 0.488159] [<c08328e4>] (kernel_init) from [<c0107850>] (ret_from_fork+0x14/0x24)
[ 0.496185] cma: cma_alloc(cma c15774bc, count 64, align 6)
[ 0.511199] cma: cma_alloc(): returned cfc95000
[ 0.517578] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.651306] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.662017] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.802093] cpuidle: using governor menu
[ 0.807403] SRAM_ADDR: omap_map_sram: P: 0x40208000 - 0x4020f000
[ 0.813873] SRAM_ADDR: omap_map_sram: V: 0xd0050000 - 0xd0057000
[ 0.820312] SRAM_ADDR: omap_sram_push_address: 0xd0056f00 - 0xd0056ffc
[ 0.827148] SRAM_ADDR: omap_sram_push_address: 0xd0056e90 - 0xd0056efc
[ 0.834106] Reprogramming SDRC clock to 332000000 Hz
[ 0.857757] gpio gpiochip0: (gpio): added GPIO chardev (254:0)
[ 0.864685] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)
[ 0.879302] OMAP GPIO hardware version 2.5
[ 0.888824] gpio gpiochip1: (gpio): added GPIO chardev (254:1)
[ 0.895416] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)
[ 0.913238] gpio gpiochip2: (gpio): added GPIO chardev (254:2)
[ 0.919952] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)
[ 0.937927] gpio gpiochip3: (gpio): added GPIO chardev (254:3)
[ 0.944519] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)
[ 0.962524] gpio gpiochip4: (gpio): added GPIO chardev (254:4)
[ 0.969207] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio)
[ 0.986816] gpio gpiochip5: (gpio): added GPIO chardev (254:5)
[ 0.993530] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio)
[ 1.045806] omap-gpmc 6e000000.gpmc: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_gpmc_pins, deferring probe
[ 1.075134] hw-breakpoint: debug architecture 0x4 unsupported.
[ 1.083435] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 1.091369] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 1.101593] Reserving DMA channels 0 and 1 for HS ROM code
[ 1.107543] OMAP DMA hardware revision 4.0
[ 1.201812] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[ 1.221221] omap-iommu 480bd400.mmu: 480bd400.mmu registered
[ 1.228912] iommu: Adding device 480bc000.isp to group 0
[ 1.236175] SCSI subsystem initialized
[ 1.241912] libata version 3.00 loaded.
[ 1.247253] omap_i2c 48070000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe
[ 1.261108] omap_i2c 48072000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c2_pins, deferring probe
[ 1.274871] omap_i2c 48060000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe
[ 1.289215] pps_core: LinuxPPS API ver. 1 registered
[ 1.294433] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.304138] PTP clock support registered
[ 1.315582] clocksource: Switched to clocksource 32k_counter
[ 1.595153] VFS: Disk quotas dquot_6.6.0
[ 1.599853] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.660949] NET: Registered protocol family 2
[ 1.669342] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.676910] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[ 1.684814] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.692321] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 1.699005] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 1.707244] NET: Registered protocol family 1
[ 1.715698] RPC: Registered named UNIX socket transport module.
[ 1.721954] RPC: Registered udp transport module.
[ 1.727050] RPC: Registered tcp transport module.
[ 1.732025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.748840] hw perfevents: no interrupt-affinity property for /pmu@54000000, guessing.
[ 1.759094] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 1.777587] audit: initializing netlink subsys (disabled)
[ 1.788665] audit: type=2000 audit(1.689:1): state=initialized audit_enabled=0 res=1
[ 1.798400] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 1.810302] NFS: Registering the id_resolver key type
[ 1.816619] Key type id_resolver registered
[ 1.821075] Key type id_legacy registered
[ 1.825775] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.838653] random: fast init done
[ 1.851684] io scheduler noop registered
[ 1.856201] io scheduler deadline registered
[ 1.860870] io scheduler cfq registered (default)
[ 1.865997] io scheduler mq-deadline registered
[ 1.870758] io scheduler kyber registered
[ 1.880615] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[ 1.889617] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[ 1.898406] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[ 1.916870] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[ 1.936401] omap_uart 4806c000.serial: no wakeirq for uart1
[ 1.942291] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp@68000000/serial@4806c000[0]'
[ 1.953826] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[ 1.967803] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp@68000000/serial@49020000[0]'
[ 1.978912] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[ 1.989379] console [ttyO2] enabled
[ 1.989379] console [ttyO2] enabled
[ 1.997009] bootconsole [earlycon0] disabled
[ 1.997009] bootconsole [earlycon0] disabled
[ 2.064758] brd: module loaded
[ 2.114959] loop: module loaded
[ 2.123657] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.151977] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 2.158264] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 2.164916] mdio_bus fixed-0: lookup for GPIO reset failed
[ 2.171386] libphy: Fixed MDIO Bus: probed
[ 2.183044] i2c /dev entries driver
[ 2.191650] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[ 2.198303] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[ 2.205322] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp@68000000/mmc@4809c000[0]' - status (0)
[ 2.216827] omap_hsmmc 4809c000.mmc: Got CD GPIO
[ 2.221771] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[ 2.228271] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[ 2.235198] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
[ 2.245788] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
[ 2.256317] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[ 2.263397] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[ 2.277252] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
[ 2.283660] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[ 2.290771] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@480b4000[0]'
[ 2.301422] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@480b4000[0]'
[ 2.311920] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[ 2.319152] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
[ 2.328521] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.336822] oprofile: using arm/armv7
[ 2.342010] Initializing XFRM netlink socket
[ 2.347503] NET: Registered protocol family 10
[ 2.357482] Segment Routing with IPv6
[ 2.361602] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.371490] NET: Registered protocol family 17
[ 2.376525] NET: Registered protocol family 15
[ 2.381835] Key type dns_resolver registered
[ 2.387268] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 2.394927] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 2.401214] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.408721] omap2_set_init_voltage: unable to set vdd_core
[ 2.419464] save_secure_sram() returns 0000ff02
[ 2.424285] save_secure_sram()'s param: 0: 0x4
[ 2.428985] save_secure_sram()'s param: 1: 0x8e700000
[ 2.434356] save_secure_sram()'s param: 2: 0x0
[ 2.439056] save_secure_sram()'s param: 3: 0x1
[ 2.443756] save_secure_sram()'s param: 4: 0x1
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: n900 in next-20170901
Date: Thu, 21 Sep 2017 10:28:11 -0700 [thread overview]
Message-ID: <20170921172811.GB4394@atomide.com> (raw)
In-Reply-To: <20170915065608.GA8567@js1304-P5Q-DELUXE>
* Joonsoo Kim <iamjoonsoo.kim@lge.com> [170914 23:55]:
> On Wed, Sep 13, 2017 at 09:31:27AM -0700, Tony Lindgren wrote:
> > Yes I disabled CONFIG_HIGHMEM and n900 boots. To disable it,
> > you need to remove it from arch/arm/mach-omap2/Kconfig that
> > selects it if ARCH_OMAP2PLUS_TYPICAL is selected.
>
> Okay. Problem would be related to address traslation. I'd like to
> check address traslation more. Could you apply following patch and
> test it? And, please send me the dmesg log and your kernel config.
> Please test this with CONFIG_DEBUG_VIRTUAL = n and CONFIG_CMA_DEBUG=y and
> CONFIG_HIGHMEM=y and with kernel bootparam 'ignore_loglevel'.
>
> It would be really appreciate if you send me two logs for before/after
> commit 9caf25f996e8.
Sorry for the delays, I finally got around testing this for you.
Compile with your patch failed for modules with __virt_to_phys_debug
being undefined so I added EXPORT_SYMBOL there. I also enabled DEBUG_LL
and EARLYPRINTK to get output.
Below is dmesg output for 9caf25f996e8 + your patch. I'll send you
the full logs separately.
Regards,
Tony
8< -----------------------
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.13.0-rc7-00246-g9caf25f996e8-dirty (tmlind at sampyla) (gcc version 6.2.0 (crosstool-NG crosstool-ng-1.22.0-248-gdf5a341)) #416 SMP Thu Sep 21 10:04:29 PDT 2017
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Nokia N900
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: dma_contiguous_reserve(limit ffffffff)
[ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x01000000, base 0x00000000, limit 0xffffffff alignment 0x00000000)
[ 0.000000] cma: Reserved 16 MiB@0x8e800000
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f14>] (dma_contiguous_remap+0x68/0x138)
[ 0.000000] [<c0c06f14>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f3c>] (dma_contiguous_remap+0x90/0x138)
[ 0.000000] [<c0c06f3c>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.000000] Hardware name: Nokia RX-51 board
[ 0.000000] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.000000] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.000000] [<c081efe8>] (dump_stack) from [<c0c06f9c>] (dma_contiguous_remap+0xf0/0x138)
[ 0.000000] [<c0c06f9c>] (dma_contiguous_remap) from [<c0c08158>] (paging_init+0x324/0x708)
[ 0.000000] [<c0c08158>] (paging_init) from [<c0c042a4>] (setup_arch+0x5b4/0xca8)
[ 0.000000] [<c0c042a4>] (setup_arch) from [<c0c0093c>] (start_kernel+0x58/0x3ec)
[ 0.000000] [<c0c0093c>] (start_kernel) from [<8000807c>] (0x8000807c)
[ 0.000000] On node 0 totalpages: 65024
[ 0.000000] free_area_init_node: node 0, pgdat c0dc22c0, node_mem_map cfa8b000
[ 0.000000] Normal zone: 572 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
[ 0.000000] percpu: Embedded 18 pages/cpu @cfd94000 s41000 r8192 d24536 u73728
[ 0.000000] pcpu-alloc: s41000 r8192 d24536 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64452
[ 0.000000] Kernel command line: root=/dev/nfs ip=dhcp console=ttyO2,115200 memmap=2M$0x88000000 ramoops.mem_address=0x88000000 ramoops.mem_size=0x200000 ramoops.record_size=0x40000 debug earlyprintk init=/root/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 219536K/260096K available (8192K kernel code, 805K rwdata, 2388K rodata, 1024K init, 8058K bss, 24176K reserved, 16384K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0000000 - 0xff800000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB)
[ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB)
[ 0.000000] .data : 0xc0d00000 - 0xc0dc9430 ( 806 kB)
[ 0.000000] .bss : 0xc0dcb000 - 0xc15a9a4c (8059 kB)
[ 0.000000] Running RCU self tests
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
[ 0.008697] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.017150] Console: colour dummy device 80x30
[ 0.021972] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.030120] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.034454] ... MAX_LOCK_DEPTH: 48
[ 0.038848] ... MAX_LOCKDEP_KEYS: 8191
[ 0.043518] ... CLASSHASH_SIZE: 4096
[ 0.048095] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.052825] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.057525] ... CHAINHASH_SIZE: 32768
[ 0.062255] memory used by lock dependency info: 5167 kB
[ 0.067932] per task-struct memory footprint: 1536 bytes
[ 0.073669] Calibrating delay loop... 493.97 BogoMIPS (lpj=2469888)
[ 0.135528] pid_max: default: 32768 minimum: 301
[ 0.141265] Security Framework initialized
[ 0.145843] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.152893] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.166473] CPU: Testing write buffer coherency: ok
[ 0.174652] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.183135] Setting up static identity map for 0x80100000 - 0x80100078
[ 0.191253] Hierarchical SRCU implementation.
[ 0.199310] smp: Bringing up secondary CPUs ...
[ 0.204101] smp: Brought up 1 node, 1 CPU
[ 0.208343] SMP: Total of 1 processors activated (493.97 BogoMIPS).
[ 0.214996] CPU: All CPU(s) started in SVC mode.
[ 0.227752] devtmpfs: initialized
[ 0.344909] Built 1 zonelists, mobility grouping on. Total pages: 58980
[ 0.353942] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 0.363677] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.374145] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.381561] pinctrl core: initialized pinctrl subsystem
[ 0.394714] random: get_random_u32 called from bucket_table_alloc+0xdc/0x264 with crng_init=0
[ 0.405181] NET: Registered protocol family 16
[ 0.410919] __alloc_from_contiguous
[ 0.414642] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-00246-g9caf25f996e8-dirty #416
[ 0.423706] Hardware name: Nokia RX-51 board
[ 0.428222] [<c0110570>] (unwind_backtrace) from [<c010c510>] (show_stack+0x10/0x14)
[ 0.436309] [<c010c510>] (show_stack) from [<c081efe8>] (dump_stack+0xac/0xe0)
[ 0.443878] [<c081efe8>] (dump_stack) from [<c01161c4>] (__alloc_from_contiguous+0x30/0xf8)
[ 0.452606] [<c01161c4>] (__alloc_from_contiguous) from [<c0c06d60>] (atomic_pool_init+0x7c/0x178)
[ 0.461944] [<c0c06d60>] (atomic_pool_init) from [<c0101918>] (do_one_initcall+0x3c/0x170)
[ 0.470550] [<c0101918>] (do_one_initcall) from [<c0c00ecc>] (kernel_init_freeable+0x1fc/0x2c4)
[ 0.479644] [<c0c00ecc>] (kernel_init_freeable) from [<c08328e4>] (kernel_init+0x8/0x110)
[ 0.488159] [<c08328e4>] (kernel_init) from [<c0107850>] (ret_from_fork+0x14/0x24)
[ 0.496185] cma: cma_alloc(cma c15774bc, count 64, align 6)
[ 0.511199] cma: cma_alloc(): returned cfc95000
[ 0.517578] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.651306] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.662017] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.802093] cpuidle: using governor menu
[ 0.807403] SRAM_ADDR: omap_map_sram: P: 0x40208000 - 0x4020f000
[ 0.813873] SRAM_ADDR: omap_map_sram: V: 0xd0050000 - 0xd0057000
[ 0.820312] SRAM_ADDR: omap_sram_push_address: 0xd0056f00 - 0xd0056ffc
[ 0.827148] SRAM_ADDR: omap_sram_push_address: 0xd0056e90 - 0xd0056efc
[ 0.834106] Reprogramming SDRC clock to 332000000 Hz
[ 0.857757] gpio gpiochip0: (gpio): added GPIO chardev (254:0)
[ 0.864685] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)
[ 0.879302] OMAP GPIO hardware version 2.5
[ 0.888824] gpio gpiochip1: (gpio): added GPIO chardev (254:1)
[ 0.895416] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)
[ 0.913238] gpio gpiochip2: (gpio): added GPIO chardev (254:2)
[ 0.919952] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)
[ 0.937927] gpio gpiochip3: (gpio): added GPIO chardev (254:3)
[ 0.944519] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)
[ 0.962524] gpio gpiochip4: (gpio): added GPIO chardev (254:4)
[ 0.969207] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio)
[ 0.986816] gpio gpiochip5: (gpio): added GPIO chardev (254:5)
[ 0.993530] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio)
[ 1.045806] omap-gpmc 6e000000.gpmc: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_gpmc_pins, deferring probe
[ 1.075134] hw-breakpoint: debug architecture 0x4 unsupported.
[ 1.083435] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 1.091369] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 1.101593] Reserving DMA channels 0 and 1 for HS ROM code
[ 1.107543] OMAP DMA hardware revision 4.0
[ 1.201812] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
[ 1.221221] omap-iommu 480bd400.mmu: 480bd400.mmu registered
[ 1.228912] iommu: Adding device 480bc000.isp to group 0
[ 1.236175] SCSI subsystem initialized
[ 1.241912] libata version 3.00 loaded.
[ 1.247253] omap_i2c 48070000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c1_pins, deferring probe
[ 1.261108] omap_i2c 48072000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c2_pins, deferring probe
[ 1.274871] omap_i2c 48060000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c3_pins, deferring probe
[ 1.289215] pps_core: LinuxPPS API ver. 1 registered
[ 1.294433] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.304138] PTP clock support registered
[ 1.315582] clocksource: Switched to clocksource 32k_counter
[ 1.595153] VFS: Disk quotas dquot_6.6.0
[ 1.599853] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.660949] NET: Registered protocol family 2
[ 1.669342] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.676910] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[ 1.684814] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.692321] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 1.699005] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 1.707244] NET: Registered protocol family 1
[ 1.715698] RPC: Registered named UNIX socket transport module.
[ 1.721954] RPC: Registered udp transport module.
[ 1.727050] RPC: Registered tcp transport module.
[ 1.732025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.748840] hw perfevents: no interrupt-affinity property for /pmu at 54000000, guessing.
[ 1.759094] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 1.777587] audit: initializing netlink subsys (disabled)
[ 1.788665] audit: type=2000 audit(1.689:1): state=initialized audit_enabled=0 res=1
[ 1.798400] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 1.810302] NFS: Registering the id_resolver key type
[ 1.816619] Key type id_resolver registered
[ 1.821075] Key type id_legacy registered
[ 1.825775] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc.
[ 1.838653] random: fast init done
[ 1.851684] io scheduler noop registered
[ 1.856201] io scheduler deadline registered
[ 1.860870] io scheduler cfq registered (default)
[ 1.865997] io scheduler mq-deadline registered
[ 1.870758] io scheduler kyber registered
[ 1.880615] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
[ 1.889617] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
[ 1.898406] pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
[ 1.916870] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
[ 1.936401] omap_uart 4806c000.serial: no wakeirq for uart1
[ 1.942291] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp at 68000000/serial at 4806c000[0]'
[ 1.953826] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[ 1.967803] of_get_named_gpiod_flags: can't parse 'rts-gpio' property of node '/ocp at 68000000/serial at 49020000[0]'
[ 1.978912] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
[ 1.989379] console [ttyO2] enabled
[ 1.989379] console [ttyO2] enabled
[ 1.997009] bootconsole [earlycon0] disabled
[ 1.997009] bootconsole [earlycon0] disabled
[ 2.064758] brd: module loaded
[ 2.114959] loop: module loaded
[ 2.123657] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.151977] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 2.158264] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 2.164916] mdio_bus fixed-0: lookup for GPIO reset failed
[ 2.171386] libphy: Fixed MDIO Bus: probed
[ 2.183044] i2c /dev entries driver
[ 2.191650] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
[ 2.198303] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[ 2.205322] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp at 68000000/mmc at 4809c000[0]' - status (0)
[ 2.216827] omap_hsmmc 4809c000.mmc: Got CD GPIO
[ 2.221771] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
[ 2.228271] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
[ 2.235198] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp at 68000000/mmc at 4809c000[0]'
[ 2.245788] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp at 68000000/mmc at 4809c000[0]'
[ 2.256317] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
[ 2.263397] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
[ 2.277252] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
[ 2.283660] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
[ 2.290771] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp at 68000000/mmc at 480b4000[0]'
[ 2.301422] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp at 68000000/mmc at 480b4000[0]'
[ 2.311920] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
[ 2.319152] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
[ 2.328521] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.336822] oprofile: using arm/armv7
[ 2.342010] Initializing XFRM netlink socket
[ 2.347503] NET: Registered protocol family 10
[ 2.357482] Segment Routing with IPv6
[ 2.361602] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.371490] NET: Registered protocol family 17
[ 2.376525] NET: Registered protocol family 15
[ 2.381835] Key type dns_resolver registered
[ 2.387268] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 2.394927] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 2.401214] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
[ 2.408721] omap2_set_init_voltage: unable to set vdd_core
[ 2.419464] save_secure_sram() returns 0000ff02
[ 2.424285] save_secure_sram()'s param: 0: 0x4
[ 2.428985] save_secure_sram()'s param: 1: 0x8e700000
[ 2.434356] save_secure_sram()'s param: 2: 0x0
[ 2.439056] save_secure_sram()'s param: 3: 0x1
[ 2.443756] save_secure_sram()'s param: 4: 0x1
next prev parent reply other threads:[~2017-09-21 17:28 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-03 20:37 n900 in next-20170901 Pavel Machek
2017-09-03 20:37 ` Pavel Machek
2017-09-05 20:13 ` Tony Lindgren
2017-09-05 20:13 ` Tony Lindgren
2017-09-05 20:27 ` Vlastimil Babka
2017-09-05 20:27 ` Vlastimil Babka
2017-09-05 20:32 ` Tony Lindgren
2017-09-05 20:32 ` Tony Lindgren
2017-09-05 23:32 ` Joonsoo Kim
2017-09-05 23:32 ` Joonsoo Kim
2017-09-06 13:30 ` Tony Lindgren
2017-09-06 13:30 ` Tony Lindgren
2017-09-07 7:30 ` Joonsoo Kim
2017-09-07 7:30 ` Joonsoo Kim
2017-09-07 16:16 ` Tony Lindgren
2017-09-07 16:16 ` Tony Lindgren
2017-09-13 7:55 ` Joonsoo Kim
2017-09-13 7:55 ` Joonsoo Kim
2017-09-13 16:31 ` Tony Lindgren
2017-09-13 16:31 ` Tony Lindgren
2017-09-15 6:56 ` Joonsoo Kim
2017-09-15 6:56 ` Joonsoo Kim
2017-09-21 17:28 ` Tony Lindgren [this message]
2017-09-21 17:28 ` Tony Lindgren
2017-09-25 8:08 ` Joonsoo Kim
2017-09-25 8:08 ` Joonsoo Kim
2017-09-25 14:54 ` Tony Lindgren
2017-09-25 14:54 ` Tony Lindgren
2017-10-18 8:29 ` Joonsoo Kim
2017-10-18 8:29 ` Joonsoo Kim
2017-10-19 18:30 ` Tony Lindgren
2017-10-19 18:30 ` Tony Lindgren
2017-10-20 1:55 ` Joonsoo Kim
2017-10-20 1:55 ` Joonsoo Kim
2017-10-20 17:31 ` Tony Lindgren
2017-10-20 17:31 ` Tony Lindgren
2017-10-23 4:53 ` Joonsoo Kim
2017-10-23 4:53 ` Joonsoo Kim
2017-10-25 17:31 ` Tony Lindgren
2017-10-25 17:31 ` Tony Lindgren
2017-10-26 4:48 ` Joonsoo Kim
2017-10-26 4:48 ` Joonsoo Kim
2017-10-26 14:16 ` Tony Lindgren
2017-10-26 14:16 ` Tony Lindgren
2017-11-07 5:33 ` Joonsoo Kim
2017-11-07 5:33 ` Joonsoo Kim
2017-11-07 15:48 ` Tony Lindgren
2017-11-07 15:48 ` Tony Lindgren
2017-11-08 7:46 ` Joonsoo Kim
2017-11-08 7:46 ` Joonsoo Kim
2017-11-08 16:34 ` Tony Lindgren
2017-11-08 16:34 ` Tony Lindgren
2017-11-09 0:08 ` Joonsoo Kim
2017-11-09 0:08 ` Joonsoo Kim
2017-11-09 0:11 ` Tony Lindgren
2017-11-09 0:11 ` Tony Lindgren
2017-11-09 0:36 ` Joonsoo Kim
2017-11-09 0:36 ` Joonsoo Kim
2017-11-09 3:50 ` Joonsoo Kim
2017-11-09 3:50 ` Joonsoo Kim
2017-11-09 15:08 ` Tony Lindgren
2017-11-09 15:08 ` Tony Lindgren
2017-11-10 0:13 ` Joonsoo Kim
2017-11-10 0:13 ` Joonsoo Kim
2017-11-10 3:26 ` Tony Lindgren
2017-11-10 3:26 ` Tony Lindgren
2017-11-10 6:19 ` Tony Lindgren
2017-11-10 6:19 ` Tony Lindgren
2017-11-10 6:23 ` Tony Lindgren
2017-11-10 6:23 ` Tony Lindgren
2017-11-10 6:46 ` Joonsoo Kim
2017-11-10 6:46 ` Joonsoo Kim
2017-11-10 15:37 ` Tony Lindgren
2017-11-10 15:37 ` Tony Lindgren
2017-11-10 6:37 ` Joonsoo Kim
2017-11-10 6:37 ` Joonsoo Kim
2017-11-10 15:36 ` Tony Lindgren
2017-11-10 15:36 ` Tony Lindgren
2017-11-13 21:15 ` Tony Lindgren
2017-11-13 21:15 ` Tony Lindgren
2017-11-14 6:40 ` Joonsoo Kim
2017-11-14 6:40 ` Joonsoo Kim
2017-11-14 6:37 ` Joonsoo Kim
2017-11-14 6:37 ` Joonsoo Kim
2017-11-14 17:37 ` Tony Lindgren
2017-11-14 17:37 ` Tony Lindgren
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:44 ` Tony Lindgren
2017-11-14 19:44 ` Tony Lindgren
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:54 ` Tony Lindgren
2017-11-14 20:54 ` Tony Lindgren
2017-11-15 0:51 ` Joonsoo Kim
2017-11-15 0:51 ` Joonsoo Kim
2017-11-15 2:04 ` Tony Lindgren
2017-11-15 2:04 ` Tony Lindgren
2017-11-15 2:48 ` Joonsoo Kim
2017-11-15 2:48 ` Joonsoo Kim
2017-11-15 2:53 ` Tony Lindgren
2017-11-15 2:53 ` Tony Lindgren
2017-11-15 2:53 ` Tony Lindgren
2017-09-15 13:18 ` Pavel Machek
2017-09-15 13:18 ` Pavel Machek
2017-09-18 2:01 ` Joonsoo Kim
2017-09-18 2:01 ` Joonsoo Kim
2017-09-18 8:11 ` Linux-next broken for 2 weeks was " Pavel Machek
2017-09-18 8:11 ` Pavel Machek
2017-09-18 22:00 ` Stephen Rothwell
2017-09-18 22:00 ` Stephen Rothwell
2017-09-18 22:16 ` Pavel Machek
2017-09-18 22:16 ` Pavel Machek
2017-09-15 13:28 ` Pali Rohár
2017-09-15 13:28 ` Pali Rohár
2017-09-18 2:07 ` Joonsoo Kim
2017-09-18 2:07 ` Joonsoo Kim
2017-09-08 9:31 ` Pavel Machek
2017-09-08 9:31 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170921172811.GB4394@atomide.com \
--to=tony@atomide.com \
--cc=aaro.koskinen@iki.fi \
--cc=abcloriens@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=pavel@ucw.cz \
--cc=serge@hallyn.com \
--cc=sfr@canb.auug.org.au \
--cc=sre@kernel.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.