From: Tony Lindgren <tony@atomide.com>
To: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pavel Machek <pavel@ucw.cz>,
pali.rohar@gmail.com, sre@kernel.org,
kernel list <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-omap@vger.kernel.org, khilman@kernel.org,
aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
patrikbachan@gmail.com, serge@hallyn.com, abcloriens@gmail.com,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Vlastimil Babka <vbabka@suse.cz>,
Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Russell King <linux@armlinux.org.uk>
Subject: Re: n900 in next-20170901
Date: Fri, 20 Oct 2017 10:31:47 -0700 [thread overview]
Message-ID: <20171020173146.GN4394@atomide.com> (raw)
In-Reply-To: <20171020015542.GA10438@js1304-P5Q-DELUXE>
* Joonsoo Kim <iamjoonsoo.kim@lge.com> [171019 18:53]:
> Oops... I made a mistak. Could you test with reverting commit
> c977ee2803787363187d6aca9cebdabc793c6531 ("omap: forcibly call
> save_secure_ram_context() for test") in that branch?
> Without reverting it, it doesn't call 'smc' so it always cause a
> hang.
Oops I should have noticed that one. Here you go with commit
c977ee280378 reverted. Still not booting.
Regards,
Tony
8< ---------------------------
Booting Linux on physical CPU 0x0
Linux version 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 (tmlind@sampyla) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0)) #541 SMP Fri Oct 20 10:15:45 PDT 2017
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
OF: fdt: Machine model: Nokia N900
Memory policy: Data cache writeback
cma: Reserved 16 MiB at 0x8e800000
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06f10>] (dma_contiguous_remap+0x64/0x168)
[<c0c06f10>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06f50>] (dma_contiguous_remap+0xa4/0x168)
[<c0c06f50>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06fcc>] (dma_contiguous_remap+0x120/0x168)
[<c0c06fcc>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
On node 0 totalpages: 65024
free_area_init_node: node 0, pgdat c0dc5040, node_mem_map cfa8b000
Normal zone: 572 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
CPU: All CPU(s) started in SVC mode.
OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
random: fast init done
percpu: Embedded 18 pages/cpu @cfd9c000 s41644 r8192 d23892 u73728
pcpu-alloc: s41644 r8192 d23892 u73728 alloc=18*4096
pcpu-alloc: [0] 0
Built 1 zonelists, mobility grouping on. Total pages: 64452
Kernel command line: root=/dev/nfs ip=dhcp console=ttyO2,115200 memmap=2M$0x88000000 ramoops.mem_address=0x88000000 ramoops.mem_size=0x200000 ramoops.record_size=0x40000 debug earlyprintk init=/root/init
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220052K/260096K available (8192K kernel code, 816K rwdata, 2420K rodata, 1024K init, 7557K bss, 23660K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0000000 - 0xff800000 ( 760 MB)
lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0900000 (9184 kB)
.init : 0xc0c00000 - 0xc0d00000 (1024 kB)
.data : 0xc0d00000 - 0xc0dcc280 ( 817 kB)
.bss : 0xc0dce000 - 0xc152f644 (7558 kB)
Running RCU self tests
Hierarchical RCU implementation.
RCU event tracing is enabled.
RCU lockdep checking is enabled.
RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
OMAP clockevent source: timer1 at 32768 Hz
clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
This ensures that you still see kernel messages. Please
update your kernel commandline.
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 32768
... MAX_LOCKDEP_CHAINS: 65536
... CHAINHASH_SIZE: 32768
memory used by lock dependency info: 4655 kB
per task-struct memory footprint: 1536 bytes
Calibrating delay loop... 493.97 BogoMIPS (lpj=2469888)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket -1, mpidr 0
Setting up static identity map for 0x80100000 - 0x80100078
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
SMP: Total of 1 processors activated (493.97 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
Built 1 zonelists, mobility grouping on. Total pages: 59109
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
__alloc_from_contiguous
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c011653c>] (__alloc_from_contiguous+0x30/0xf8)
[<c011653c>] (__alloc_from_contiguous) from [<c0c06d60>] (atomic_pool_init+0x7c/0x178)
[<c0c06d60>] (atomic_pool_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[<c0101df4>] (do_one_initcall) from [<c0c00ee4>] (kernel_init_freeable+0x1fc/0x2c4)
[<c0c00ee4>] (kernel_init_freeable) from [<c0842a2c>] (kernel_init+0x8/0x110)
[<c0842a2c>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c)
DMA: preallocated 256 KiB pool for atomic coherent allocations
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
cpuidle: using governor menu
SRAM_ADDR: omap_map_sram: P: 0x40208000 - 0x4020f000
SRAM_ADDR: omap_map_sram: V: 0xd0050000 - 0xd0057000
SRAM_ADDR: omap_sram_push_address: 0xd0056f00 - 0xd0056ffc
SRAM_ADDR: omap_sram_push_address: 0xd0056e90 - 0xd0056efc
Reprogramming SDRC clock to 332000000 Hz
gpio gpiochip0: (gpio): added GPIO chardev (254:0)
gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)
OMAP GPIO hardware version 2.5
gpio gpiochip1: (gpio): added GPIO chardev (254:1)
gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)
gpio gpiochip2: (gpio): added GPIO chardev (254:2)
gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)
gpio gpiochip3: (gpio): added GPIO chardev (254:3)
gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)
gpio gpiochip4: (gpio): added GPIO chardev (254:4)
gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio)
gpio gpiochip5: (gpio): added GPIO chardev (254:5)
gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio)
omap-gpmc 6e000000.gpmc: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_gpmc_pins, deferring probe
hw-breakpoint: debug architecture 0x4 unsupported.
omap4_sram_init:Unable to allocate sram needed to handle errata I688
omap4_sram_init:Unable to get sram pool needed to handle errata I688
Reserving DMA channels 0 and 1 for HS ROM code
OMAP DMA hardware revision 4.0
omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
omap-iommu 480bd400.mmu: 480bd400.mmu registered
iommu: Adding device 480bc000.isp to group 0
SCSI subsystem initialized
libata version 3.00 loaded.
omap_i2c 48070000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c1_pins, deferring probe
omap_i2c 48072000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c2_pins, deferring probe
omap_i2c 48060000.i2c: could not find pctldev for node /ocp@68000000/l4@48000000/scm@2000/pinmux@30/pinmux_i2c3_pins, deferring probe
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource 32k_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: no interrupt-affinity property for /pmu@54000000, guessing.
hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(3.541:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=14 max_order=16 bucket_order=2
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250
49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250
console [ttyS2] enabled
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
mdio_bus fixed-0: GPIO lookup for consumer reset
mdio_bus fixed-0: using lookup tables for GPIO lookup
mdio_bus fixed-0: lookup for GPIO reset failed
libphy: Fixed MDIO Bus: probed
i2c /dev entries driver
omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp@68000000/mmc@4809c000[0]' - status (0)
omap_hsmmc 4809c000.mmc: Got CD GPIO
omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@4809c000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@4809c000[0]'
omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp@68000000/mmc@480b4000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp@68000000/mmc@480b4000[0]'
omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
ledtrig-cpu: registered to indicate activity on CPUs
oprofile: using arm/armv7
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
omap2_set_init_voltage: unable to set vdd_mpu_iva
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
save_secure_sram() returns 0000ff02
save_secure_sram()'s param: 0: 0x4
save_secure_sram()'s param: 1: 0x8e700000
save_secure_sram()'s param: 2: 0x0
save_secure_sram()'s param: 3: 0x1
save_secure_sram()'s param: 4: 0x1
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: n900 in next-20170901
Date: Fri, 20 Oct 2017 10:31:47 -0700 [thread overview]
Message-ID: <20171020173146.GN4394@atomide.com> (raw)
In-Reply-To: <20171020015542.GA10438@js1304-P5Q-DELUXE>
* Joonsoo Kim <iamjoonsoo.kim@lge.com> [171019 18:53]:
> Oops... I made a mistak. Could you test with reverting commit
> c977ee2803787363187d6aca9cebdabc793c6531 ("omap: forcibly call
> save_secure_ram_context() for test") in that branch?
> Without reverting it, it doesn't call 'smc' so it always cause a
> hang.
Oops I should have noticed that one. Here you go with commit
c977ee280378 reverted. Still not booting.
Regards,
Tony
8< ---------------------------
Booting Linux on physical CPU 0x0
Linux version 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 (tmlind at sampyla) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0)) #541 SMP Fri Oct 20 10:15:45 PDT 2017
CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
OF: fdt: Machine model: Nokia N900
Memory policy: Data cache writeback
cma: Reserved 16 MiB@0x8e800000
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06f10>] (dma_contiguous_remap+0x64/0x168)
[<c0c06f10>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06f50>] (dma_contiguous_remap+0xa4/0x168)
[<c0c06f50>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
CMA_ADDR: __phys_to_virt_debug: 0x8e800000 to 0xce800000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c0c06fcc>] (dma_contiguous_remap+0x120/0x168)
[<c0c06fcc>] (dma_contiguous_remap) from [<c0c08114>] (paging_init+0x324/0x700)
[<c0c08114>] (paging_init) from [<c0c042ac>] (setup_arch+0x5b4/0xc94)
[<c0c042ac>] (setup_arch) from [<c0c00940>] (start_kernel+0x54/0x3fc)
[<c0c00940>] (start_kernel) from [<8000807c>] (0x8000807c)
On node 0 totalpages: 65024
free_area_init_node: node 0, pgdat c0dc5040, node_mem_map cfa8b000
Normal zone: 572 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 65024 pages, LIFO batch:15
CPU: All CPU(s) started in SVC mode.
OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
random: fast init done
percpu: Embedded 18 pages/cpu @cfd9c000 s41644 r8192 d23892 u73728
pcpu-alloc: s41644 r8192 d23892 u73728 alloc=18*4096
pcpu-alloc: [0] 0
Built 1 zonelists, mobility grouping on. Total pages: 64452
Kernel command line: root=/dev/nfs ip=dhcp console=ttyO2,115200 memmap=2M$0x88000000 ramoops.mem_address=0x88000000 ramoops.mem_size=0x200000 ramoops.record_size=0x40000 debug earlyprintk init=/root/init
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220052K/260096K available (8192K kernel code, 816K rwdata, 2420K rodata, 1024K init, 7557K bss, 23660K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0000000 - 0xff800000 ( 760 MB)
lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0900000 (9184 kB)
.init : 0xc0c00000 - 0xc0d00000 (1024 kB)
.data : 0xc0d00000 - 0xc0dcc280 ( 817 kB)
.bss : 0xc0dce000 - 0xc152f644 (7558 kB)
Running RCU self tests
Hierarchical RCU implementation.
RCU event tracing is enabled.
RCU lockdep checking is enabled.
RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
OMAP clockevent source: timer1 at 32768 Hz
clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
OMAP clocksource: 32k_counter at 32768 Hz
Console: colour dummy device 80x30
WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
This ensures that you still see kernel messages. Please
update your kernel commandline.
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 32768
... MAX_LOCKDEP_CHAINS: 65536
... CHAINHASH_SIZE: 32768
memory used by lock dependency info: 4655 kB
per task-struct memory footprint: 1536 bytes
Calibrating delay loop... 493.97 BogoMIPS (lpj=2469888)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket -1, mpidr 0
Setting up static identity map for 0x80100000 - 0x80100078
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
SMP: Total of 1 processors activated (493.97 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
Built 1 zonelists, mobility grouping on. Total pages: 59109
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
__alloc_from_contiguous
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-next-20170901-00011-geca3cddaf1a8 #541
Hardware name: Nokia RX-51 board
[<c0110b38>] (unwind_backtrace) from [<c010caec>] (show_stack+0x10/0x14)
[<c010caec>] (show_stack) from [<c082eae4>] (dump_stack+0xac/0xe0)
[<c082eae4>] (dump_stack) from [<c011653c>] (__alloc_from_contiguous+0x30/0xf8)
[<c011653c>] (__alloc_from_contiguous) from [<c0c06d60>] (atomic_pool_init+0x7c/0x178)
[<c0c06d60>] (atomic_pool_init) from [<c0101df4>] (do_one_initcall+0x3c/0x170)
[<c0101df4>] (do_one_initcall) from [<c0c00ee4>] (kernel_init_freeable+0x1fc/0x2c4)
[<c0c00ee4>] (kernel_init_freeable) from [<c0842a2c>] (kernel_init+0x8/0x110)
[<c0842a2c>] (kernel_init) from [<c0107d78>] (ret_from_fork+0x14/0x3c)
DMA: preallocated 256 KiB pool for atomic coherent allocations
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
cpuidle: using governor menu
SRAM_ADDR: omap_map_sram: P: 0x40208000 - 0x4020f000
SRAM_ADDR: omap_map_sram: V: 0xd0050000 - 0xd0057000
SRAM_ADDR: omap_sram_push_address: 0xd0056f00 - 0xd0056ffc
SRAM_ADDR: omap_sram_push_address: 0xd0056e90 - 0xd0056efc
Reprogramming SDRC clock to 332000000 Hz
gpio gpiochip0: (gpio): added GPIO chardev (254:0)
gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio)
OMAP GPIO hardware version 2.5
gpio gpiochip1: (gpio): added GPIO chardev (254:1)
gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio)
gpio gpiochip2: (gpio): added GPIO chardev (254:2)
gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio)
gpio gpiochip3: (gpio): added GPIO chardev (254:3)
gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio)
gpio gpiochip4: (gpio): added GPIO chardev (254:4)
gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio)
gpio gpiochip5: (gpio): added GPIO chardev (254:5)
gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio)
omap-gpmc 6e000000.gpmc: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_gpmc_pins, deferring probe
hw-breakpoint: debug architecture 0x4 unsupported.
omap4_sram_init:Unable to allocate sram needed to handle errata I688
omap4_sram_init:Unable to get sram pool needed to handle errata I688
Reserving DMA channels 0 and 1 for HS ROM code
OMAP DMA hardware revision 4.0
omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
omap-iommu 480bd400.mmu: 480bd400.mmu registered
iommu: Adding device 480bc000.isp to group 0
SCSI subsystem initialized
libata version 3.00 loaded.
omap_i2c 48070000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c1_pins, deferring probe
omap_i2c 48072000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c2_pins, deferring probe
omap_i2c 48060000.i2c: could not find pctldev for node /ocp at 68000000/l4 at 48000000/scm at 2000/pinmux at 30/pinmux_i2c3_pins, deferring probe
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource 32k_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 4, 81920 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: no interrupt-affinity property for /pmu at 54000000, guessing.
hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(3.541:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=14 max_order=16 bucket_order=2
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
pinctrl-single 480025d8.pinmux: 18 pins at pa fa0025d8 size 36
Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250
49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250
console [ttyS2] enabled
brd: module loaded
loop: module loaded
mtdoops: mtd device (mtddev=name/number) must be supplied
mdio_bus fixed-0: GPIO lookup for consumer reset
mdio_bus fixed-0: using lookup tables for GPIO lookup
mdio_bus fixed-0: lookup for GPIO reset failed
libphy: Fixed MDIO Bus: probed
i2c /dev entries driver
omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp at 68000000/mmc at 4809c000[0]' - status (0)
omap_hsmmc 4809c000.mmc: Got CD GPIO
omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp
omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp at 68000000/mmc at 4809c000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp at 68000000/mmc at 4809c000[0]'
omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup
omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed
omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp
omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp at 68000000/mmc at 480b4000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp at 68000000/mmc at 480b4000[0]'
omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup
omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed
ledtrig-cpu: registered to indicate activity on CPUs
oprofile: using arm/armv7
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
omap2_set_init_voltage: unable to set vdd_mpu_iva
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
save_secure_sram() returns 0000ff02
save_secure_sram()'s param: 0: 0x4
save_secure_sram()'s param: 1: 0x8e700000
save_secure_sram()'s param: 2: 0x0
save_secure_sram()'s param: 3: 0x1
save_secure_sram()'s param: 4: 0x1
next prev parent reply other threads:[~2017-10-20 17:31 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-03 20:37 n900 in next-20170901 Pavel Machek
2017-09-03 20:37 ` Pavel Machek
2017-09-05 20:13 ` Tony Lindgren
2017-09-05 20:13 ` Tony Lindgren
2017-09-05 20:27 ` Vlastimil Babka
2017-09-05 20:27 ` Vlastimil Babka
2017-09-05 20:32 ` Tony Lindgren
2017-09-05 20:32 ` Tony Lindgren
2017-09-05 23:32 ` Joonsoo Kim
2017-09-05 23:32 ` Joonsoo Kim
2017-09-06 13:30 ` Tony Lindgren
2017-09-06 13:30 ` Tony Lindgren
2017-09-07 7:30 ` Joonsoo Kim
2017-09-07 7:30 ` Joonsoo Kim
2017-09-07 16:16 ` Tony Lindgren
2017-09-07 16:16 ` Tony Lindgren
2017-09-13 7:55 ` Joonsoo Kim
2017-09-13 7:55 ` Joonsoo Kim
2017-09-13 16:31 ` Tony Lindgren
2017-09-13 16:31 ` Tony Lindgren
2017-09-15 6:56 ` Joonsoo Kim
2017-09-15 6:56 ` Joonsoo Kim
2017-09-21 17:28 ` Tony Lindgren
2017-09-21 17:28 ` Tony Lindgren
2017-09-25 8:08 ` Joonsoo Kim
2017-09-25 8:08 ` Joonsoo Kim
2017-09-25 14:54 ` Tony Lindgren
2017-09-25 14:54 ` Tony Lindgren
2017-10-18 8:29 ` Joonsoo Kim
2017-10-18 8:29 ` Joonsoo Kim
2017-10-19 18:30 ` Tony Lindgren
2017-10-19 18:30 ` Tony Lindgren
2017-10-20 1:55 ` Joonsoo Kim
2017-10-20 1:55 ` Joonsoo Kim
2017-10-20 17:31 ` Tony Lindgren [this message]
2017-10-20 17:31 ` Tony Lindgren
2017-10-23 4:53 ` Joonsoo Kim
2017-10-23 4:53 ` Joonsoo Kim
2017-10-25 17:31 ` Tony Lindgren
2017-10-25 17:31 ` Tony Lindgren
2017-10-26 4:48 ` Joonsoo Kim
2017-10-26 4:48 ` Joonsoo Kim
2017-10-26 14:16 ` Tony Lindgren
2017-10-26 14:16 ` Tony Lindgren
2017-11-07 5:33 ` Joonsoo Kim
2017-11-07 5:33 ` Joonsoo Kim
2017-11-07 15:48 ` Tony Lindgren
2017-11-07 15:48 ` Tony Lindgren
2017-11-08 7:46 ` Joonsoo Kim
2017-11-08 7:46 ` Joonsoo Kim
2017-11-08 16:34 ` Tony Lindgren
2017-11-08 16:34 ` Tony Lindgren
2017-11-09 0:08 ` Joonsoo Kim
2017-11-09 0:08 ` Joonsoo Kim
2017-11-09 0:11 ` Tony Lindgren
2017-11-09 0:11 ` Tony Lindgren
2017-11-09 0:36 ` Joonsoo Kim
2017-11-09 0:36 ` Joonsoo Kim
2017-11-09 3:50 ` Joonsoo Kim
2017-11-09 3:50 ` Joonsoo Kim
2017-11-09 15:08 ` Tony Lindgren
2017-11-09 15:08 ` Tony Lindgren
2017-11-10 0:13 ` Joonsoo Kim
2017-11-10 0:13 ` Joonsoo Kim
2017-11-10 3:26 ` Tony Lindgren
2017-11-10 3:26 ` Tony Lindgren
2017-11-10 6:19 ` Tony Lindgren
2017-11-10 6:19 ` Tony Lindgren
2017-11-10 6:23 ` Tony Lindgren
2017-11-10 6:23 ` Tony Lindgren
2017-11-10 6:46 ` Joonsoo Kim
2017-11-10 6:46 ` Joonsoo Kim
2017-11-10 15:37 ` Tony Lindgren
2017-11-10 15:37 ` Tony Lindgren
2017-11-10 6:37 ` Joonsoo Kim
2017-11-10 6:37 ` Joonsoo Kim
2017-11-10 15:36 ` Tony Lindgren
2017-11-10 15:36 ` Tony Lindgren
2017-11-13 21:15 ` Tony Lindgren
2017-11-13 21:15 ` Tony Lindgren
2017-11-14 6:40 ` Joonsoo Kim
2017-11-14 6:40 ` Joonsoo Kim
2017-11-14 6:37 ` Joonsoo Kim
2017-11-14 6:37 ` Joonsoo Kim
2017-11-14 17:37 ` Tony Lindgren
2017-11-14 17:37 ` Tony Lindgren
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:31 ` Tero Kristo
2017-11-14 19:44 ` Tony Lindgren
2017-11-14 19:44 ` Tony Lindgren
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:01 ` Tero Kristo
2017-11-14 20:54 ` Tony Lindgren
2017-11-14 20:54 ` Tony Lindgren
2017-11-15 0:51 ` Joonsoo Kim
2017-11-15 0:51 ` Joonsoo Kim
2017-11-15 2:04 ` Tony Lindgren
2017-11-15 2:04 ` Tony Lindgren
2017-11-15 2:48 ` Joonsoo Kim
2017-11-15 2:48 ` Joonsoo Kim
2017-11-15 2:53 ` Tony Lindgren
2017-11-15 2:53 ` Tony Lindgren
2017-11-15 2:53 ` Tony Lindgren
2017-09-15 13:18 ` Pavel Machek
2017-09-15 13:18 ` Pavel Machek
2017-09-18 2:01 ` Joonsoo Kim
2017-09-18 2:01 ` Joonsoo Kim
2017-09-18 8:11 ` Linux-next broken for 2 weeks was " Pavel Machek
2017-09-18 8:11 ` Pavel Machek
2017-09-18 22:00 ` Stephen Rothwell
2017-09-18 22:00 ` Stephen Rothwell
2017-09-18 22:16 ` Pavel Machek
2017-09-18 22:16 ` Pavel Machek
2017-09-15 13:28 ` Pali Rohár
2017-09-15 13:28 ` Pali Rohár
2017-09-18 2:07 ` Joonsoo Kim
2017-09-18 2:07 ` Joonsoo Kim
2017-09-08 9:31 ` Pavel Machek
2017-09-08 9:31 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171020173146.GN4394@atomide.com \
--to=tony@atomide.com \
--cc=aaro.koskinen@iki.fi \
--cc=abcloriens@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=ivo.g.dimitrov.75@gmail.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=pali.rohar@gmail.com \
--cc=patrikbachan@gmail.com \
--cc=pavel@ucw.cz \
--cc=serge@hallyn.com \
--cc=sfr@canb.auug.org.au \
--cc=sre@kernel.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.