From: Ladislav Michl <ladis@linux-mips.org> To: linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com>, Peter Ujfalusi <peter.ujfalusi@ti.com>, Kyungmin Park <kyungmin.park@samsung.com>, Boris Brezillon <boris.brezillon@free-electrons.com>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v4 15/16] ARM: OMAP2+: Remove gpmc-onenand Date: Sat, 11 Nov 2017 22:29:04 +0100 [thread overview] Message-ID: <20171111212904.2qti2txasbsmmjw7@lenoch> (raw) In-Reply-To: <20171111211206.465pgorrjp3eyix6@lenoch> As OneNAND driver is now using devicetree gpmc-onenand and its platform data is unused and can be removed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> --- Changes: -v4: new patch arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/gpmc-onenand.c | 409 ------------------------ include/linux/platform_data/mtd-onenand-omap2.h | 34 -- 3 files changed, 446 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 38f1748a4500..e0306d3df41a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -235,6 +235,3 @@ obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o - -onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o -obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c deleted file mode 100644 index 2944af820558..000000000000 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ /dev/null @@ -1,409 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-onenand.c - * - * Copyright (C) 2006 - 2009 Nokia Corporation - * Contacts: Juha Yrjola - * Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/onenand_regs.h> -#include <linux/io.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/mtd-onenand-omap2.h> -#include <linux/err.h> - -#include <asm/mach/flash.h> - -#include "soc.h" - -#define ONENAND_IO_SIZE SZ_128K - -#define ONENAND_FLAG_SYNCREAD (1 << 0) -#define ONENAND_FLAG_SYNCWRITE (1 << 1) -#define ONENAND_FLAG_HF (1 << 2) -#define ONENAND_FLAG_VHF (1 << 3) - -static unsigned onenand_flags; -static unsigned latency; - -static struct omap_onenand_platform_data *gpmc_onenand_data; - -static struct resource gpmc_onenand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gpmc_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .num_resources = 1, - .resource = &gpmc_onenand_resource, -}; - -static struct gpmc_settings onenand_async = { - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, -}; - -static struct gpmc_settings onenand_sync = { - .burst_read = true, - .burst_wrap = true, - .burst_len = GPMC_BURST_16, - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, - .wait_pin = 0, -}; - -static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_aavdh = 7; - const int t_ce = 76; - const int t_aa = 76; - const int t_oe = 20; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; - dev_t.t_avdp_w = dev_t.t_avdp_r; - dev_t.t_aavdh = t_aavdh * 1000; - dev_t.t_aa = t_aa * 1000; - dev_t.t_ce = t_ce * 1000; - dev_t.t_oe = t_oe * 1000; - dev_t.t_cez_r = t_cez * 1000; - dev_t.t_cez_w = dev_t.t_cez_r; - dev_t.t_wpl = t_wpl * 1000; - dev_t.t_wph = t_wph * 1000; - - gpmc_calc_timings(t, &onenand_async, &dev_t); -} - -static void omap2_onenand_set_async_mode(void __iomem *onenand_base) -{ - u32 reg; - - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static void set_onenand_cfg(void __iomem *onenand_base) -{ - u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - - reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | - ONENAND_SYS_CFG1_BL_16; - if (onenand_flags & ONENAND_FLAG_SYNCREAD) - reg |= ONENAND_SYS_CFG1_SYNC_READ; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (onenand_flags & ONENAND_FLAG_SYNCWRITE) - reg |= ONENAND_SYS_CFG1_SYNC_WRITE; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (onenand_flags & ONENAND_FLAG_HF) - reg |= ONENAND_SYS_CFG1_HF; - else - reg &= ~ONENAND_SYS_CFG1_HF; - if (onenand_flags & ONENAND_FLAG_VHF) - reg |= ONENAND_SYS_CFG1_VHF; - else - reg &= ~ONENAND_SYS_CFG1_VHF; - - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base) -{ - u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq; - - switch ((ver >> 4) & 0xf) { - case 0: - freq = 40; - break; - case 1: - freq = 54; - break; - case 2: - freq = 66; - break; - case 3: - freq = 83; - break; - case 4: - freq = 104; - break; - default: - pr_err("onenand rate not detected, bad GPMC async timings?\n"); - freq = 0; - } - - return freq; -} - -static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, - unsigned int flags, - int freq) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, gpmc_clk_ns; - - if (flags & ONENAND_SYNC_READ) - onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (flags & ONENAND_SYNC_READWRITE) - onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; - - switch (freq) { - case 104: - min_gpmc_clk_period = 9600; /* 104 MHz */ - t_ces = 3; - t_avds = 4; - t_avdh = 2; - t_ach = 3; - t_aavdh = 6; - t_rdyo = 6; - break; - case 83: - min_gpmc_clk_period = 12000; /* 83 MHz */ - t_ces = 5; - t_avds = 4; - t_avdh = 2; - t_ach = 6; - t_aavdh = 6; - t_rdyo = 9; - break; - case 66: - min_gpmc_clk_period = 15000; /* 66 MHz */ - t_ces = 6; - t_avds = 5; - t_avdh = 2; - t_ach = 6; - t_aavdh = 6; - t_rdyo = 11; - break; - default: - min_gpmc_clk_period = 18500; /* 54 MHz */ - t_ces = 7; - t_avds = 7; - t_avdh = 7; - t_ach = 9; - t_aavdh = 7; - t_rdyo = 15; - onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; - break; - } - - div = gpmc_calc_divider(min_gpmc_clk_period); - gpmc_clk_ns = gpmc_ticks_to_ns(div); - if (gpmc_clk_ns < 15) /* >66MHz */ - onenand_flags |= ONENAND_FLAG_HF; - else - onenand_flags &= ~ONENAND_FLAG_HF; - if (gpmc_clk_ns < 12) /* >83MHz */ - onenand_flags |= ONENAND_FLAG_VHF; - else - onenand_flags &= ~ONENAND_FLAG_VHF; - if (onenand_flags & ONENAND_FLAG_VHF) - latency = 8; - else if (onenand_flags & ONENAND_FLAG_HF) - latency = 6; - else if (gpmc_clk_ns >= 25) /* 40 MHz*/ - latency = 3; - else - latency = 4; - - /* Set synchronous read timings */ - memset(&dev_t, 0, sizeof(dev_t)); - - if (onenand_flags & ONENAND_FLAG_SYNCREAD) - onenand_sync.sync_read = true; - if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - onenand_sync.sync_write = true; - onenand_sync.burst_write = true; - } else { - dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; - dev_t.t_wpl = t_wpl * 1000; - dev_t.t_wph = t_wph * 1000; - dev_t.t_aavdh = t_aavdh * 1000; - } - dev_t.ce_xdelay = true; - dev_t.avd_xdelay = true; - dev_t.oe_xdelay = true; - dev_t.we_xdelay = true; - dev_t.clk = min_gpmc_clk_period; - dev_t.t_bacc = dev_t.clk; - dev_t.t_ces = t_ces * 1000; - dev_t.t_avds = t_avds * 1000; - dev_t.t_avdh = t_avdh * 1000; - dev_t.t_ach = t_ach * 1000; - dev_t.cyc_iaa = (latency + 1); - dev_t.t_cez_r = t_cez * 1000; - dev_t.t_cez_w = dev_t.t_cez_r; - dev_t.cyc_aavdh_oe = 1; - dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - - gpmc_calc_timings(t, &onenand_sync, &dev_t); -} - -static int omap2_onenand_setup_async(void __iomem *onenand_base) -{ - struct gpmc_timings t; - int ret; - - /* - * Note that we need to keep sync_write set for the call to - * omap2_onenand_set_async_mode() to work to detect the onenand - * supported clock rate for the sync timings. - */ - if (gpmc_onenand_data->of_node) { - gpmc_read_settings_dt(gpmc_onenand_data->of_node, - &onenand_async); - if (onenand_async.sync_read || onenand_async.sync_write) { - if (onenand_async.sync_write) - gpmc_onenand_data->flags |= - ONENAND_SYNC_READWRITE; - else - gpmc_onenand_data->flags |= ONENAND_SYNC_READ; - onenand_async.sync_read = false; - } - } - - onenand_async.sync_write = true; - omap2_onenand_calc_async_timings(&t); - - ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); - if (ret < 0) - return ret; - - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async); - if (ret < 0) - return ret; - - omap2_onenand_set_async_mode(onenand_base); - - return 0; -} - -static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) -{ - int ret, freq = *freq_ptr; - struct gpmc_timings t; - - if (!freq) { - /* Very first call freq is not known */ - freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); - if (!freq) - return -ENODEV; - set_onenand_cfg(onenand_base); - } - - if (gpmc_onenand_data->of_node) { - gpmc_read_settings_dt(gpmc_onenand_data->of_node, - &onenand_sync); - } else { - /* - * FIXME: Appears to be legacy code from initial ONENAND commit. - * Unclear what boards this is for and if this can be removed. - */ - if (!cpu_is_omap34xx()) - onenand_sync.wait_on_read = true; - } - - omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); - - ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); - if (ret < 0) - return ret; - - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync); - if (ret < 0) - return ret; - - set_onenand_cfg(onenand_base); - - *freq_ptr = freq; - - return 0; -} - -static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) -{ - struct device *dev = &gpmc_onenand_device.dev; - unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; - int ret; - - ret = omap2_onenand_setup_async(onenand_base); - if (ret) { - dev_err(dev, "unable to set to async mode\n"); - return ret; - } - - if (!(gpmc_onenand_data->flags & l)) - return 0; - - ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); - if (ret) - dev_err(dev, "unable to set to sync mode\n"); - return ret; -} - -int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) -{ - int err; - struct device *dev = &gpmc_onenand_device.dev; - - gpmc_onenand_data = _onenand_data; - gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; - gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; - - if (cpu_is_omap24xx() && - (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); - gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; - gpmc_onenand_data->flags |= ONENAND_SYNC_READ; - } - - if (cpu_is_omap34xx()) - gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; - else - gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; - - err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, - (unsigned long *)&gpmc_onenand_resource.start); - if (err < 0) { - dev_err(dev, "Cannot request GPMC CS %d, error %d\n", - gpmc_onenand_data->cs, err); - return err; - } - - gpmc_onenand_resource.end = gpmc_onenand_resource.start + - ONENAND_IO_SIZE - 1; - - err = platform_device_register(&gpmc_onenand_device); - if (err) { - dev_err(dev, "Unable to register OneNAND device\n"); - gpmc_cs_free(gpmc_onenand_data->cs); - } - - return err; -} diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h deleted file mode 100644 index 56ff0e6f5ad1..000000000000 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MTD_ONENAND_OMAP2_H -#define __MTD_ONENAND_OMAP2_H - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) -#define ONENAND_IN_OMAP34XX (1 << 2) - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int *freq_ptr); - int dma_channel; - u8 flags; - u8 regulator_can_sleep; - u8 skip_initial_unlocking; - - /* for passing the partitions */ - struct device_node *of_node; -}; -#endif -- 2.11.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Ladislav Michl <ladis@linux-mips.org> To: linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org Cc: Roger Quadros <rogerq@ti.com>, Tony Lindgren <tony@atomide.com>, Peter Ujfalusi <peter.ujfalusi@ti.com>, Boris Brezillon <boris.brezillon@free-electrons.com>, Kyungmin Park <kyungmin.park@samsung.com> Subject: [PATCH v4 15/16] ARM: OMAP2+: Remove gpmc-onenand Date: Sat, 11 Nov 2017 22:29:04 +0100 [thread overview] Message-ID: <20171111212904.2qti2txasbsmmjw7@lenoch> (raw) In-Reply-To: <20171111211206.465pgorrjp3eyix6@lenoch> As OneNAND driver is now using devicetree gpmc-onenand and its platform data is unused and can be removed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> --- Changes: -v4: new patch arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/gpmc-onenand.c | 409 ------------------------ include/linux/platform_data/mtd-onenand-omap2.h | 34 -- 3 files changed, 446 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 38f1748a4500..e0306d3df41a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -235,6 +235,3 @@ obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y) obj-y += omap_phy_internal.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o - -onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o -obj-y += $(onenand-m) $(onenand-y) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c deleted file mode 100644 index 2944af820558..000000000000 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ /dev/null @@ -1,409 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-onenand.c - * - * Copyright (C) 2006 - 2009 Nokia Corporation - * Contacts: Juha Yrjola - * Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/onenand_regs.h> -#include <linux/io.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/mtd-onenand-omap2.h> -#include <linux/err.h> - -#include <asm/mach/flash.h> - -#include "soc.h" - -#define ONENAND_IO_SIZE SZ_128K - -#define ONENAND_FLAG_SYNCREAD (1 << 0) -#define ONENAND_FLAG_SYNCWRITE (1 << 1) -#define ONENAND_FLAG_HF (1 << 2) -#define ONENAND_FLAG_VHF (1 << 3) - -static unsigned onenand_flags; -static unsigned latency; - -static struct omap_onenand_platform_data *gpmc_onenand_data; - -static struct resource gpmc_onenand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gpmc_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .num_resources = 1, - .resource = &gpmc_onenand_resource, -}; - -static struct gpmc_settings onenand_async = { - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, -}; - -static struct gpmc_settings onenand_sync = { - .burst_read = true, - .burst_wrap = true, - .burst_len = GPMC_BURST_16, - .device_width = GPMC_DEVWIDTH_16BIT, - .mux_add_data = GPMC_MUX_AD, - .wait_pin = 0, -}; - -static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_aavdh = 7; - const int t_ce = 76; - const int t_aa = 76; - const int t_oe = 20; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; - dev_t.t_avdp_w = dev_t.t_avdp_r; - dev_t.t_aavdh = t_aavdh * 1000; - dev_t.t_aa = t_aa * 1000; - dev_t.t_ce = t_ce * 1000; - dev_t.t_oe = t_oe * 1000; - dev_t.t_cez_r = t_cez * 1000; - dev_t.t_cez_w = dev_t.t_cez_r; - dev_t.t_wpl = t_wpl * 1000; - dev_t.t_wph = t_wph * 1000; - - gpmc_calc_timings(t, &onenand_async, &dev_t); -} - -static void omap2_onenand_set_async_mode(void __iomem *onenand_base) -{ - u32 reg; - - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static void set_onenand_cfg(void __iomem *onenand_base) -{ - u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - - reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | - ONENAND_SYS_CFG1_BL_16; - if (onenand_flags & ONENAND_FLAG_SYNCREAD) - reg |= ONENAND_SYS_CFG1_SYNC_READ; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (onenand_flags & ONENAND_FLAG_SYNCWRITE) - reg |= ONENAND_SYS_CFG1_SYNC_WRITE; - else - reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (onenand_flags & ONENAND_FLAG_HF) - reg |= ONENAND_SYS_CFG1_HF; - else - reg &= ~ONENAND_SYS_CFG1_HF; - if (onenand_flags & ONENAND_FLAG_VHF) - reg |= ONENAND_SYS_CFG1_VHF; - else - reg &= ~ONENAND_SYS_CFG1_VHF; - - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); -} - -static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base) -{ - u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq; - - switch ((ver >> 4) & 0xf) { - case 0: - freq = 40; - break; - case 1: - freq = 54; - break; - case 2: - freq = 66; - break; - case 3: - freq = 83; - break; - case 4: - freq = 104; - break; - default: - pr_err("onenand rate not detected, bad GPMC async timings?\n"); - freq = 0; - } - - return freq; -} - -static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, - unsigned int flags, - int freq) -{ - struct gpmc_device_timings dev_t; - const int t_cer = 15; - const int t_avdp = 12; - const int t_cez = 20; /* max of t_cez, t_oez */ - const int t_wpl = 40; - const int t_wph = 30; - int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, gpmc_clk_ns; - - if (flags & ONENAND_SYNC_READ) - onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (flags & ONENAND_SYNC_READWRITE) - onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; - - switch (freq) { - case 104: - min_gpmc_clk_period = 9600; /* 104 MHz */ - t_ces = 3; - t_avds = 4; - t_avdh = 2; - t_ach = 3; - t_aavdh = 6; - t_rdyo = 6; - break; - case 83: - min_gpmc_clk_period = 12000; /* 83 MHz */ - t_ces = 5; - t_avds = 4; - t_avdh = 2; - t_ach = 6; - t_aavdh = 6; - t_rdyo = 9; - break; - case 66: - min_gpmc_clk_period = 15000; /* 66 MHz */ - t_ces = 6; - t_avds = 5; - t_avdh = 2; - t_ach = 6; - t_aavdh = 6; - t_rdyo = 11; - break; - default: - min_gpmc_clk_period = 18500; /* 54 MHz */ - t_ces = 7; - t_avds = 7; - t_avdh = 7; - t_ach = 9; - t_aavdh = 7; - t_rdyo = 15; - onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; - break; - } - - div = gpmc_calc_divider(min_gpmc_clk_period); - gpmc_clk_ns = gpmc_ticks_to_ns(div); - if (gpmc_clk_ns < 15) /* >66MHz */ - onenand_flags |= ONENAND_FLAG_HF; - else - onenand_flags &= ~ONENAND_FLAG_HF; - if (gpmc_clk_ns < 12) /* >83MHz */ - onenand_flags |= ONENAND_FLAG_VHF; - else - onenand_flags &= ~ONENAND_FLAG_VHF; - if (onenand_flags & ONENAND_FLAG_VHF) - latency = 8; - else if (onenand_flags & ONENAND_FLAG_HF) - latency = 6; - else if (gpmc_clk_ns >= 25) /* 40 MHz*/ - latency = 3; - else - latency = 4; - - /* Set synchronous read timings */ - memset(&dev_t, 0, sizeof(dev_t)); - - if (onenand_flags & ONENAND_FLAG_SYNCREAD) - onenand_sync.sync_read = true; - if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - onenand_sync.sync_write = true; - onenand_sync.burst_write = true; - } else { - dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; - dev_t.t_wpl = t_wpl * 1000; - dev_t.t_wph = t_wph * 1000; - dev_t.t_aavdh = t_aavdh * 1000; - } - dev_t.ce_xdelay = true; - dev_t.avd_xdelay = true; - dev_t.oe_xdelay = true; - dev_t.we_xdelay = true; - dev_t.clk = min_gpmc_clk_period; - dev_t.t_bacc = dev_t.clk; - dev_t.t_ces = t_ces * 1000; - dev_t.t_avds = t_avds * 1000; - dev_t.t_avdh = t_avdh * 1000; - dev_t.t_ach = t_ach * 1000; - dev_t.cyc_iaa = (latency + 1); - dev_t.t_cez_r = t_cez * 1000; - dev_t.t_cez_w = dev_t.t_cez_r; - dev_t.cyc_aavdh_oe = 1; - dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - - gpmc_calc_timings(t, &onenand_sync, &dev_t); -} - -static int omap2_onenand_setup_async(void __iomem *onenand_base) -{ - struct gpmc_timings t; - int ret; - - /* - * Note that we need to keep sync_write set for the call to - * omap2_onenand_set_async_mode() to work to detect the onenand - * supported clock rate for the sync timings. - */ - if (gpmc_onenand_data->of_node) { - gpmc_read_settings_dt(gpmc_onenand_data->of_node, - &onenand_async); - if (onenand_async.sync_read || onenand_async.sync_write) { - if (onenand_async.sync_write) - gpmc_onenand_data->flags |= - ONENAND_SYNC_READWRITE; - else - gpmc_onenand_data->flags |= ONENAND_SYNC_READ; - onenand_async.sync_read = false; - } - } - - onenand_async.sync_write = true; - omap2_onenand_calc_async_timings(&t); - - ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); - if (ret < 0) - return ret; - - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async); - if (ret < 0) - return ret; - - omap2_onenand_set_async_mode(onenand_base); - - return 0; -} - -static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) -{ - int ret, freq = *freq_ptr; - struct gpmc_timings t; - - if (!freq) { - /* Very first call freq is not known */ - freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); - if (!freq) - return -ENODEV; - set_onenand_cfg(onenand_base); - } - - if (gpmc_onenand_data->of_node) { - gpmc_read_settings_dt(gpmc_onenand_data->of_node, - &onenand_sync); - } else { - /* - * FIXME: Appears to be legacy code from initial ONENAND commit. - * Unclear what boards this is for and if this can be removed. - */ - if (!cpu_is_omap34xx()) - onenand_sync.wait_on_read = true; - } - - omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); - - ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); - if (ret < 0) - return ret; - - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync); - if (ret < 0) - return ret; - - set_onenand_cfg(onenand_base); - - *freq_ptr = freq; - - return 0; -} - -static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) -{ - struct device *dev = &gpmc_onenand_device.dev; - unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; - int ret; - - ret = omap2_onenand_setup_async(onenand_base); - if (ret) { - dev_err(dev, "unable to set to async mode\n"); - return ret; - } - - if (!(gpmc_onenand_data->flags & l)) - return 0; - - ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); - if (ret) - dev_err(dev, "unable to set to sync mode\n"); - return ret; -} - -int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) -{ - int err; - struct device *dev = &gpmc_onenand_device.dev; - - gpmc_onenand_data = _onenand_data; - gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; - gpmc_onenand_device.dev.platform_data = gpmc_onenand_data; - - if (cpu_is_omap24xx() && - (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); - gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; - gpmc_onenand_data->flags |= ONENAND_SYNC_READ; - } - - if (cpu_is_omap34xx()) - gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; - else - gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; - - err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, - (unsigned long *)&gpmc_onenand_resource.start); - if (err < 0) { - dev_err(dev, "Cannot request GPMC CS %d, error %d\n", - gpmc_onenand_data->cs, err); - return err; - } - - gpmc_onenand_resource.end = gpmc_onenand_resource.start + - ONENAND_IO_SIZE - 1; - - err = platform_device_register(&gpmc_onenand_device); - if (err) { - dev_err(dev, "Unable to register OneNAND device\n"); - gpmc_cs_free(gpmc_onenand_data->cs); - } - - return err; -} diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h deleted file mode 100644 index 56ff0e6f5ad1..000000000000 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MTD_ONENAND_OMAP2_H -#define __MTD_ONENAND_OMAP2_H - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - -#define ONENAND_SYNC_READ (1 << 0) -#define ONENAND_SYNC_READWRITE (1 << 1) -#define ONENAND_IN_OMAP34XX (1 << 2) - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *, int *freq_ptr); - int dma_channel; - u8 flags; - u8 regulator_can_sleep; - u8 skip_initial_unlocking; - - /* for passing the partitions */ - struct device_node *of_node; -}; -#endif -- 2.11.0
next prev parent reply other threads:[~2017-11-11 21:29 UTC|newest] Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-11-11 21:12 [PATCH v4 00/16] OMAP2+ OneNAND driver update Ladislav Michl 2017-11-11 21:12 ` Ladislav Michl 2017-11-11 21:17 ` [PATCH v4 02/16] ARM: dts: OMAP2+: Add compatible property to onenand node Ladislav Michl 2017-11-11 21:17 ` Ladislav Michl 2017-11-14 15:11 ` Roger Quadros 2017-11-14 15:11 ` Roger Quadros 2017-11-14 23:01 ` Ladislav Michl 2017-11-14 23:01 ` Ladislav Michl 2017-11-14 21:39 ` Tony Lindgren 2017-11-14 21:39 ` Tony Lindgren 2017-11-11 21:18 ` [PATCH v4 03/16] ARM: dts: omap3-igep: Update onenand node timings Ladislav Michl 2017-11-11 21:18 ` Ladislav Michl 2017-11-14 15:12 ` Roger Quadros 2017-11-14 15:12 ` Roger Quadros 2017-11-14 21:39 ` Tony Lindgren 2017-11-14 21:39 ` Tony Lindgren 2017-11-11 21:19 ` [PATCH v4 04/16] mtd: onenand: omap2: Remove regulator support Ladislav Michl 2017-11-11 21:19 ` Ladislav Michl 2017-11-14 15:13 ` Roger Quadros 2017-11-14 15:13 ` Roger Quadros 2017-11-15 14:15 ` Sebastian Reichel 2017-11-15 14:15 ` Sebastian Reichel 2017-11-11 21:19 ` [PATCH v4 05/16] mtd: onenand: omap2: Remove skip initial unlocking support Ladislav Michl 2017-11-11 21:19 ` Ladislav Michl 2017-11-14 15:14 ` Roger Quadros 2017-11-14 15:14 ` Roger Quadros 2017-11-15 14:16 ` Sebastian Reichel 2017-11-15 14:16 ` Sebastian Reichel 2017-11-11 21:20 ` [PATCH v4 06/16] mtd: onenand: omap2: Remove partitioning support from platform data Ladislav Michl 2017-11-11 21:20 ` Ladislav Michl 2017-11-14 15:14 ` Roger Quadros 2017-11-14 15:14 ` Roger Quadros 2017-11-15 14:57 ` Sebastian Reichel 2017-11-15 14:57 ` Sebastian Reichel 2017-11-11 21:20 ` [PATCH v4 07/16] mtd: onenand: omap2: Account waiting time as waiting on IO Ladislav Michl 2017-11-11 21:20 ` Ladislav Michl 2017-11-14 15:18 ` Roger Quadros 2017-11-14 15:18 ` Roger Quadros 2017-11-15 15:00 ` Sebastian Reichel 2017-11-15 15:00 ` Sebastian Reichel 2017-11-11 21:21 ` [PATCH v4 08/16] mtd: onenand: omap2: Simplify the DMA setup for various paths Ladislav Michl 2017-11-11 21:21 ` Ladislav Michl 2017-11-15 8:35 ` Roger Quadros 2017-11-15 8:35 ` Roger Quadros 2017-11-15 15:05 ` Sebastian Reichel 2017-11-15 15:05 ` Sebastian Reichel 2017-11-11 21:22 ` [PATCH v4 09/16] mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation Ladislav Michl 2017-11-11 21:22 ` Ladislav Michl 2017-11-15 8:38 ` Roger Quadros 2017-11-15 8:38 ` Roger Quadros 2017-11-15 15:07 ` Sebastian Reichel 2017-11-15 15:07 ` Sebastian Reichel 2017-11-11 21:23 ` [PATCH v4 10/16] mtd: onenand: omap2: Convert to use dmaengine for memcpy Ladislav Michl 2017-11-11 21:23 ` Ladislav Michl 2017-11-15 8:57 ` Roger Quadros 2017-11-15 8:57 ` Roger Quadros 2017-11-15 9:32 ` Ladislav Michl 2017-11-15 9:32 ` Ladislav Michl 2017-11-15 15:19 ` Sebastian Reichel 2017-11-15 15:19 ` Sebastian Reichel 2017-11-11 21:24 ` [PATCH v4 11/16] mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific Ladislav Michl 2017-11-11 21:24 ` Ladislav Michl 2017-11-15 9:31 ` Roger Quadros 2017-11-15 9:31 ` Roger Quadros 2017-11-15 15:20 ` Sebastian Reichel 2017-11-15 15:20 ` Sebastian Reichel 2017-11-11 21:24 ` [PATCH v4 12/16] mtd: onenand: omap2: Enable DMA by default Ladislav Michl 2017-11-11 21:24 ` Ladislav Michl 2017-11-15 10:08 ` Roger Quadros 2017-11-15 10:08 ` Roger Quadros 2017-11-15 10:32 ` Ladislav Michl 2017-11-15 10:32 ` Ladislav Michl 2017-11-15 10:43 ` Roger Quadros 2017-11-15 10:43 ` Roger Quadros 2017-11-27 18:21 ` Ladislav Michl 2017-11-27 18:21 ` Ladislav Michl 2017-11-15 10:44 ` Roger Quadros 2017-11-15 10:44 ` Roger Quadros 2017-11-11 21:26 ` [PATCH v4 13/16] memory: omap-gpmc: Refactor OneNAND support Ladislav Michl 2017-11-11 21:26 ` Ladislav Michl 2017-11-15 10:13 ` Roger Quadros 2017-11-15 10:13 ` Roger Quadros 2017-11-15 10:37 ` Ladislav Michl 2017-11-15 10:37 ` Ladislav Michl 2017-11-11 21:27 ` [PATCH v4 14/16] mtd: onenand: omap2: Configure driver from DT Ladislav Michl 2017-11-11 21:27 ` Ladislav Michl 2017-11-15 10:40 ` Roger Quadros 2017-11-15 10:40 ` Roger Quadros 2017-11-15 10:53 ` Ladislav Michl 2017-11-15 10:53 ` Ladislav Michl 2017-11-15 11:04 ` Roger Quadros 2017-11-15 11:04 ` Roger Quadros 2017-11-15 11:20 ` Ladislav Michl 2017-11-15 11:20 ` Ladislav Michl 2017-11-15 14:41 ` Roger Quadros 2017-11-15 14:41 ` Roger Quadros 2017-11-11 21:29 ` Ladislav Michl [this message] 2017-11-11 21:29 ` [PATCH v4 15/16] ARM: OMAP2+: Remove gpmc-onenand Ladislav Michl 2017-11-14 21:41 ` Tony Lindgren 2017-11-14 21:41 ` Tony Lindgren 2017-11-15 10:46 ` Roger Quadros 2017-11-15 10:46 ` Roger Quadros 2017-11-11 21:29 ` [PATCH v4 16/16] ARM: dts: Nokia: Use R/B pin Ladislav Michl 2017-11-11 21:29 ` Ladislav Michl 2017-11-14 21:42 ` Tony Lindgren 2017-11-14 21:42 ` Tony Lindgren 2017-11-14 22:46 ` Ladislav Michl 2017-11-14 22:46 ` Ladislav Michl 2017-11-14 21:48 ` [PATCH v4 00/16] OMAP2+ OneNAND driver update Tony Lindgren 2017-11-14 21:48 ` Tony Lindgren 2017-11-14 22:53 ` Ladislav Michl 2017-11-14 22:53 ` Ladislav Michl 2017-11-15 8:10 ` Peter Ujfalusi 2017-11-15 8:10 ` Peter Ujfalusi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171111212904.2qti2txasbsmmjw7@lenoch \ --to=ladis@linux-mips.org \ --cc=boris.brezillon@free-electrons.com \ --cc=kyungmin.park@samsung.com \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=peter.ujfalusi@ti.com \ --cc=rogerq@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.