From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: benjamin.gaignard@st.com, fabrice.gasnier@st.com,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory
Date: Mon, 21 May 2018 09:58:28 -0400 [thread overview]
Message-ID: <20180521135828.GD5723@sophia> (raw)
In-Reply-To: <20180520165302.101d37ce@archlinux>
On Sun, May 20, 2018 at 04:53:02PM +0100, Jonathan Cameron wrote:
>On Wed, 16 May 2018 13:52:39 -0400
>William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
>
>> This patch removes the IIO counter subdirectory which is now superceded
>> by the Counter subsystem. Deprecation warnings are added to the
>> documentation of the relevant IIO counter sysfs attributes.
>>
>> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
>
>Please drop the directory when it becomes empty rather than in a later
>patch. IIRC there are some issues with empty Makefiles that will
>make building inbetween tricky.
>
>For the deprecated markings.
>
>Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
I'll have the directory removal occur with the removal of the last
module then when the directory becomes empty.
Regarding the deprecation markings, should I select a specific kernel
version to date the removal of these attributes, or leave the future
date open as this patch is now?
William Breathitt Gray
>
>> ---
>> Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++
>> .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++
>> drivers/iio/Kconfig | 1 -
>> drivers/iio/Makefile | 1 -
>> drivers/iio/counter/Kconfig | 8 --------
>> drivers/iio/counter/Makefile | 5 -----
>> 6 files changed, 24 insertions(+), 15 deletions(-)
>> delete mode 100644 drivers/iio/counter/Kconfig
>> delete mode 100644 drivers/iio/counter/Makefile
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index 731146c3b138..6115d97b075e 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -1637,6 +1637,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device counts from channel Y. For quadrature
>> counters, multiplication by an available [Y]_scale results in
>> the counts of a single quadrature signal phase from channel Y.
>> @@ -1645,6 +1647,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device index value from channel Y. This attribute
>> provides an absolute positional reference (e.g. a pulse once per
>> revolution) which may be used to home positional systems as
>> @@ -1654,6 +1658,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
>> KernelVersion: 4.12
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> A list of possible counting directions which are:
>> - "up" : counter device is increasing.
>> - "down": counter device is decreasing.
>> @@ -1662,4 +1668,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
>> KernelVersion: 4.12
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device counters direction for channel Y.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> index 7fac2c268d9a..bac3d0d48b7b 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Discrete set of available values for the respective counter
>> configuration are listed in this file.
>>
>> @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Count mode for channel Y. Four count modes are available:
>> normal, range limit, non-recycle, and modulo-n. The preset value
>> for channel Y is used by the count mode where required.
>> @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Read-only attribute that indicates whether excessive noise is
>> present at the channel Y count inputs in quadrature clock mode;
>> irrelevant in non-quadrature clock mode.
>> @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> If the counter device supports preset registers, the preset
>> count for channel Y is provided by this attribute.
>>
>> @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Configure channel Y counter for non-quadrature or quadrature
>> clock mode. Selecting non-quadrature clock mode will disable
>> synchronous load mode. In quadrature clock mode, the channel Y
>> @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Whether to set channel Y counter with channel Y preset value
>> when channel Y index input is active, or continuously count.
>> Valid attribute values are boolean.
>> @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Active level of channel Y index input; irrelevant in
>> non-synchronous load mode.
>>
>> @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
>> KernelVersion: 4.10
>> Contact: linux-iio@vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Configure channel Y counter for non-synchronous or synchronous
>> load mode. Synchronous load mode cannot be selected in
>> non-quadrature clock mode.
>> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
>> index d69e85a8bdc3..1152efad91a1 100644
>> --- a/drivers/iio/Kconfig
>> +++ b/drivers/iio/Kconfig
>> @@ -74,7 +74,6 @@ source "drivers/iio/afe/Kconfig"
>> source "drivers/iio/amplifiers/Kconfig"
>> source "drivers/iio/chemical/Kconfig"
>> source "drivers/iio/common/Kconfig"
>> -source "drivers/iio/counter/Kconfig"
>> source "drivers/iio/dac/Kconfig"
>> source "drivers/iio/dummy/Kconfig"
>> source "drivers/iio/frequency/Kconfig"
>> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
>> index d8cba9c229c0..7bdd31f1b88f 100644
>> --- a/drivers/iio/Makefile
>> +++ b/drivers/iio/Makefile
>> @@ -20,7 +20,6 @@ obj-y += amplifiers/
>> obj-y += buffer/
>> obj-y += chemical/
>> obj-y += common/
>> -obj-y += counter/
>> obj-y += dac/
>> obj-y += dummy/
>> obj-y += gyro/
>> diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
>> deleted file mode 100644
>> index 95a7a0df6cac..000000000000
>> --- a/drivers/iio/counter/Kconfig
>> +++ /dev/null
>> @@ -1,8 +0,0 @@
>> -#
>> -# Counter devices
>> -#
>> -# When adding new entries keep the list in alphabetical order
>> -
>> -menu "Counters"
>> -
>> -endmenu
>> diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile
>> deleted file mode 100644
>> index 8fd3d954775a..000000000000
>> --- a/drivers/iio/counter/Makefile
>> +++ /dev/null
>> @@ -1,5 +0,0 @@
>> -#
>> -# Makefile for IIO counter devices
>> -#
>> -
>> -# When adding new entries keep the list in alphabetical order
>
WARNING: multiple messages have this Message-ID (diff)
From: vilhelm.gray@gmail.com (William Breathitt Gray)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory
Date: Mon, 21 May 2018 09:58:28 -0400 [thread overview]
Message-ID: <20180521135828.GD5723@sophia> (raw)
In-Reply-To: <20180520165302.101d37ce@archlinux>
On Sun, May 20, 2018 at 04:53:02PM +0100, Jonathan Cameron wrote:
>On Wed, 16 May 2018 13:52:39 -0400
>William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
>
>> This patch removes the IIO counter subdirectory which is now superceded
>> by the Counter subsystem. Deprecation warnings are added to the
>> documentation of the relevant IIO counter sysfs attributes.
>>
>> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
>
>Please drop the directory when it becomes empty rather than in a later
>patch. IIRC there are some issues with empty Makefiles that will
>make building inbetween tricky.
>
>For the deprecated markings.
>
>Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
I'll have the directory removal occur with the removal of the last
module then when the directory becomes empty.
Regarding the deprecation markings, should I select a specific kernel
version to date the removal of these attributes, or leave the future
date open as this patch is now?
William Breathitt Gray
>
>> ---
>> Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++
>> .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++
>> drivers/iio/Kconfig | 1 -
>> drivers/iio/Makefile | 1 -
>> drivers/iio/counter/Kconfig | 8 --------
>> drivers/iio/counter/Makefile | 5 -----
>> 6 files changed, 24 insertions(+), 15 deletions(-)
>> delete mode 100644 drivers/iio/counter/Kconfig
>> delete mode 100644 drivers/iio/counter/Makefile
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
>> index 731146c3b138..6115d97b075e 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio
>> @@ -1637,6 +1637,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device counts from channel Y. For quadrature
>> counters, multiplication by an available [Y]_scale results in
>> the counts of a single quadrature signal phase from channel Y.
>> @@ -1645,6 +1647,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device index value from channel Y. This attribute
>> provides an absolute positional reference (e.g. a pulse once per
>> revolution) which may be used to home positional systems as
>> @@ -1654,6 +1658,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
>> KernelVersion: 4.12
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> A list of possible counting directions which are:
>> - "up" : counter device is increasing.
>> - "down": counter device is decreasing.
>> @@ -1662,4 +1668,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
>> KernelVersion: 4.12
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Raw counter device counters direction for channel Y.
>> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> index 7fac2c268d9a..bac3d0d48b7b 100644
>> --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8
>> @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Discrete set of available values for the respective counter
>> configuration are listed in this file.
>>
>> @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Count mode for channel Y. Four count modes are available:
>> normal, range limit, non-recycle, and modulo-n. The preset value
>> for channel Y is used by the count mode where required.
>> @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Read-only attribute that indicates whether excessive noise is
>> present at the channel Y count inputs in quadrature clock mode;
>> irrelevant in non-quadrature clock mode.
>> @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> If the counter device supports preset registers, the preset
>> count for channel Y is provided by this attribute.
>>
>> @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Configure channel Y counter for non-quadrature or quadrature
>> clock mode. Selecting non-quadrature clock mode will disable
>> synchronous load mode. In quadrature clock mode, the channel Y
>> @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Whether to set channel Y counter with channel Y preset value
>> when channel Y index input is active, or continuously count.
>> Valid attribute values are boolean.
>> @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Active level of channel Y index input; irrelevant in
>> non-synchronous load mode.
>>
>> @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
>> KernelVersion: 4.10
>> Contact: linux-iio at vger.kernel.org
>> Description:
>> + This interface is deprecated; please use the Counter subsystem.
>> +
>> Configure channel Y counter for non-synchronous or synchronous
>> load mode. Synchronous load mode cannot be selected in
>> non-quadrature clock mode.
>> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
>> index d69e85a8bdc3..1152efad91a1 100644
>> --- a/drivers/iio/Kconfig
>> +++ b/drivers/iio/Kconfig
>> @@ -74,7 +74,6 @@ source "drivers/iio/afe/Kconfig"
>> source "drivers/iio/amplifiers/Kconfig"
>> source "drivers/iio/chemical/Kconfig"
>> source "drivers/iio/common/Kconfig"
>> -source "drivers/iio/counter/Kconfig"
>> source "drivers/iio/dac/Kconfig"
>> source "drivers/iio/dummy/Kconfig"
>> source "drivers/iio/frequency/Kconfig"
>> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
>> index d8cba9c229c0..7bdd31f1b88f 100644
>> --- a/drivers/iio/Makefile
>> +++ b/drivers/iio/Makefile
>> @@ -20,7 +20,6 @@ obj-y += amplifiers/
>> obj-y += buffer/
>> obj-y += chemical/
>> obj-y += common/
>> -obj-y += counter/
>> obj-y += dac/
>> obj-y += dummy/
>> obj-y += gyro/
>> diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
>> deleted file mode 100644
>> index 95a7a0df6cac..000000000000
>> --- a/drivers/iio/counter/Kconfig
>> +++ /dev/null
>> @@ -1,8 +0,0 @@
>> -#
>> -# Counter devices
>> -#
>> -# When adding new entries keep the list in alphabetical order
>> -
>> -menu "Counters"
>> -
>> -endmenu
>> diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile
>> deleted file mode 100644
>> index 8fd3d954775a..000000000000
>> --- a/drivers/iio/counter/Makefile
>> +++ /dev/null
>> @@ -1,5 +0,0 @@
>> -#
>> -# Makefile for IIO counter devices
>> -#
>> -
>> -# When adding new entries keep the list in alphabetical order
>
next prev parent reply other threads:[~2018-05-21 13:58 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 17:50 [PATCH v6 0/9] Introduce the Counter subsystem William Breathitt Gray
2018-05-16 17:50 ` William Breathitt Gray
2018-05-16 17:50 ` [PATCH v6 1/9] counter: Introduce the Generic Counter interface William Breathitt Gray
2018-05-16 17:50 ` William Breathitt Gray
2018-05-20 15:06 ` Jonathan Cameron
2018-05-20 15:06 ` Jonathan Cameron
2018-05-21 13:06 ` William Breathitt Gray
2018-05-21 13:06 ` William Breathitt Gray
2018-05-16 17:50 ` [PATCH v6 2/9] counter: Documentation: Add Generic Counter sysfs documentation William Breathitt Gray
2018-05-16 17:50 ` William Breathitt Gray
2018-05-20 15:12 ` Jonathan Cameron
2018-05-20 15:12 ` Jonathan Cameron
2018-05-16 17:51 ` [PATCH v6 3/9] docs: Add Generic Counter interface documentation William Breathitt Gray
2018-05-16 17:51 ` William Breathitt Gray
2018-05-19 15:30 ` kbuild test robot
2018-05-19 15:30 ` kbuild test robot
2018-05-19 15:30 ` kbuild test robot
2018-05-20 15:31 ` Jonathan Cameron
2018-05-20 15:31 ` Jonathan Cameron
2018-05-20 15:31 ` Jonathan Cameron
2018-05-21 13:47 ` William Breathitt Gray
2018-05-21 13:47 ` William Breathitt Gray
2018-05-22 17:08 ` Jonathan Cameron
2018-05-22 17:08 ` Jonathan Cameron
2018-05-25 9:26 ` Fabrice Gasnier
2018-05-25 9:26 ` Fabrice Gasnier
2018-05-25 9:26 ` Fabrice Gasnier
2018-05-25 13:00 ` William Breathitt Gray
2018-05-25 13:00 ` William Breathitt Gray
2018-05-16 17:51 ` [PATCH v6 4/9] counter: 104-quad-8: Add Generic Counter interface support William Breathitt Gray
2018-05-16 17:51 ` William Breathitt Gray
2018-05-19 13:16 ` kbuild test robot
2018-05-19 13:16 ` kbuild test robot
2018-05-19 13:16 ` kbuild test robot
2018-05-19 13:55 ` William Breathitt Gray
2018-05-19 13:55 ` William Breathitt Gray
2018-05-19 13:55 ` William Breathitt Gray
2018-05-19 13:16 ` [RFC PATCH] counter: 104-quad-8: quad8_ops can be static kbuild test robot
2018-05-19 13:16 ` kbuild test robot
2018-05-19 13:16 ` kbuild test robot
2018-05-20 15:42 ` [PATCH v6 4/9] counter: 104-quad-8: Add Generic Counter interface support Jonathan Cameron
2018-05-20 15:42 ` Jonathan Cameron
2018-05-21 13:51 ` William Breathitt Gray
2018-05-21 13:51 ` William Breathitt Gray
2018-05-16 17:51 ` [PATCH v6 5/9] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation William Breathitt Gray
2018-05-16 17:51 ` William Breathitt Gray
2018-05-16 17:51 ` [PATCH v6 6/9] dt-bindings: counter: Document stm32 quadrature encoder William Breathitt Gray
2018-05-16 17:51 ` William Breathitt Gray
2018-05-17 16:23 ` Rob Herring
2018-05-17 16:23 ` Rob Herring
2018-05-17 18:07 ` William Breathitt Gray
2018-05-17 18:07 ` William Breathitt Gray
2018-05-17 18:59 ` Benjamin Gaignard
2018-05-17 18:59 ` Benjamin Gaignard
2018-05-18 16:28 ` Rob Herring
2018-05-18 16:28 ` Rob Herring
2018-05-20 15:47 ` Jonathan Cameron
2018-05-20 15:47 ` Jonathan Cameron
2018-06-04 13:03 ` Benjamin Gaignard
2018-06-04 13:03 ` Benjamin Gaignard
2018-06-04 13:03 ` Benjamin Gaignard
2018-05-16 17:52 ` [PATCH v6 7/9] counter: Add STM32 Timer " William Breathitt Gray
2018-05-16 17:52 ` William Breathitt Gray
2018-05-16 17:52 ` [PATCH v6 8/9] counter: stm32-lptimer: add counter device William Breathitt Gray
2018-05-16 17:52 ` William Breathitt Gray
2018-05-18 16:34 ` Rob Herring
2018-05-18 16:34 ` Rob Herring
2018-05-16 17:52 ` [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory William Breathitt Gray
2018-05-16 17:52 ` William Breathitt Gray
2018-05-20 15:53 ` Jonathan Cameron
2018-05-20 15:53 ` Jonathan Cameron
2018-05-21 13:58 ` William Breathitt Gray [this message]
2018-05-21 13:58 ` William Breathitt Gray
2018-05-22 10:44 ` Jonathan Cameron
2018-05-22 10:44 ` Jonathan Cameron
2018-05-22 10:44 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180521135828.GD5723@sophia \
--to=vilhelm.gray@gmail.com \
--cc=benjamin.gaignard@st.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrice.gasnier@st.com \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.