From: William Breathitt Gray <vilhelm.gray@gmail.com> To: jic23@kernel.org Cc: benjamin.gaignard@st.com, fabrice.gasnier@st.com, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, William Breathitt Gray <vilhelm.gray@gmail.com> Subject: [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory Date: Wed, 16 May 2018 13:52:39 -0400 [thread overview] Message-ID: <4c335e0eebfbaf6e86f41e0f2864d76993d90b13.1526487615.git.vilhelm.gray@gmail.com> (raw) In-Reply-To: <cover.1526487615.git.vilhelm.gray@gmail.com> This patch removes the IIO counter subdirectory which is now superceded by the Counter subsystem. Deprecation warnings are added to the documentation of the relevant IIO counter sysfs attributes. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> --- Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++ .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++ drivers/iio/Kconfig | 1 - drivers/iio/Makefile | 1 - drivers/iio/counter/Kconfig | 8 -------- drivers/iio/counter/Makefile | 5 ----- 6 files changed, 24 insertions(+), 15 deletions(-) delete mode 100644 drivers/iio/counter/Kconfig delete mode 100644 drivers/iio/counter/Makefile diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 731146c3b138..6115d97b075e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1637,6 +1637,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counts from channel Y. For quadrature counters, multiplication by an available [Y]_scale results in the counts of a single quadrature signal phase from channel Y. @@ -1645,6 +1647,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device index value from channel Y. This attribute provides an absolute positional reference (e.g. a pulse once per revolution) which may be used to home positional systems as @@ -1654,6 +1658,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available KernelVersion: 4.12 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + A list of possible counting directions which are: - "up" : counter device is increasing. - "down": counter device is decreasing. @@ -1662,4 +1668,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction KernelVersion: 4.12 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counters direction for channel Y. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 index 7fac2c268d9a..bac3d0d48b7b 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Discrete set of available values for the respective counter configuration are listed in this file. @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Count mode for channel Y. Four count modes are available: normal, range limit, non-recycle, and modulo-n. The preset value for channel Y is used by the count mode where required. @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Read-only attribute that indicates whether excessive noise is present at the channel Y count inputs in quadrature clock mode; irrelevant in non-quadrature clock mode. @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + If the counter device supports preset registers, the preset count for channel Y is provided by this attribute. @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-quadrature or quadrature clock mode. Selecting non-quadrature clock mode will disable synchronous load mode. In quadrature clock mode, the channel Y @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Whether to set channel Y counter with channel Y preset value when channel Y index input is active, or continuously count. Valid attribute values are boolean. @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Active level of channel Y index input; irrelevant in non-synchronous load mode. @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-synchronous or synchronous load mode. Synchronous load mode cannot be selected in non-quadrature clock mode. diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index d69e85a8bdc3..1152efad91a1 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -74,7 +74,6 @@ source "drivers/iio/afe/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" -source "drivers/iio/counter/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/dummy/Kconfig" source "drivers/iio/frequency/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index d8cba9c229c0..7bdd31f1b88f 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -20,7 +20,6 @@ obj-y += amplifiers/ obj-y += buffer/ obj-y += chemical/ obj-y += common/ -obj-y += counter/ obj-y += dac/ obj-y += dummy/ obj-y += gyro/ diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig deleted file mode 100644 index 95a7a0df6cac..000000000000 --- a/drivers/iio/counter/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -# -# Counter devices -# -# When adding new entries keep the list in alphabetical order - -menu "Counters" - -endmenu diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile deleted file mode 100644 index 8fd3d954775a..000000000000 --- a/drivers/iio/counter/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for IIO counter devices -# - -# When adding new entries keep the list in alphabetical order -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: vilhelm.gray@gmail.com (William Breathitt Gray) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory Date: Wed, 16 May 2018 13:52:39 -0400 [thread overview] Message-ID: <4c335e0eebfbaf6e86f41e0f2864d76993d90b13.1526487615.git.vilhelm.gray@gmail.com> (raw) In-Reply-To: <cover.1526487615.git.vilhelm.gray@gmail.com> This patch removes the IIO counter subdirectory which is now superceded by the Counter subsystem. Deprecation warnings are added to the documentation of the relevant IIO counter sysfs attributes. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> --- Documentation/ABI/testing/sysfs-bus-iio | 8 ++++++++ .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 16 ++++++++++++++++ drivers/iio/Kconfig | 1 - drivers/iio/Makefile | 1 - drivers/iio/counter/Kconfig | 8 -------- drivers/iio/counter/Makefile | 5 ----- 6 files changed, 24 insertions(+), 15 deletions(-) delete mode 100644 drivers/iio/counter/Kconfig delete mode 100644 drivers/iio/counter/Makefile diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 731146c3b138..6115d97b075e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1637,6 +1637,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counts from channel Y. For quadrature counters, multiplication by an available [Y]_scale results in the counts of a single quadrature signal phase from channel Y. @@ -1645,6 +1647,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device index value from channel Y. This attribute provides an absolute positional reference (e.g. a pulse once per revolution) which may be used to home positional systems as @@ -1654,6 +1658,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available KernelVersion: 4.12 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + A list of possible counting directions which are: - "up" : counter device is increasing. - "down": counter device is decreasing. @@ -1662,4 +1668,6 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction KernelVersion: 4.12 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Raw counter device counters direction for channel Y. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 index 7fac2c268d9a..bac3d0d48b7b 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 @@ -6,6 +6,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Discrete set of available values for the respective counter configuration are listed in this file. @@ -13,6 +15,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Count mode for channel Y. Four count modes are available: normal, range limit, non-recycle, and modulo-n. The preset value for channel Y is used by the count mode where required. @@ -47,6 +51,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Read-only attribute that indicates whether excessive noise is present at the channel Y count inputs in quadrature clock mode; irrelevant in non-quadrature clock mode. @@ -55,6 +61,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + If the counter device supports preset registers, the preset count for channel Y is provided by this attribute. @@ -62,6 +70,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-quadrature or quadrature clock mode. Selecting non-quadrature clock mode will disable synchronous load mode. In quadrature clock mode, the channel Y @@ -83,6 +93,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Whether to set channel Y counter with channel Y preset value when channel Y index input is active, or continuously count. Valid attribute values are boolean. @@ -91,6 +103,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Active level of channel Y index input; irrelevant in non-synchronous load mode. @@ -98,6 +112,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode KernelVersion: 4.10 Contact: linux-iio at vger.kernel.org Description: + This interface is deprecated; please use the Counter subsystem. + Configure channel Y counter for non-synchronous or synchronous load mode. Synchronous load mode cannot be selected in non-quadrature clock mode. diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index d69e85a8bdc3..1152efad91a1 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -74,7 +74,6 @@ source "drivers/iio/afe/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" -source "drivers/iio/counter/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/dummy/Kconfig" source "drivers/iio/frequency/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index d8cba9c229c0..7bdd31f1b88f 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -20,7 +20,6 @@ obj-y += amplifiers/ obj-y += buffer/ obj-y += chemical/ obj-y += common/ -obj-y += counter/ obj-y += dac/ obj-y += dummy/ obj-y += gyro/ diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig deleted file mode 100644 index 95a7a0df6cac..000000000000 --- a/drivers/iio/counter/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -# -# Counter devices -# -# When adding new entries keep the list in alphabetical order - -menu "Counters" - -endmenu diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile deleted file mode 100644 index 8fd3d954775a..000000000000 --- a/drivers/iio/counter/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for IIO counter devices -# - -# When adding new entries keep the list in alphabetical order -- 2.17.0
next prev parent reply other threads:[~2018-05-16 17:52 UTC|newest] Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-16 17:50 [PATCH v6 0/9] Introduce the Counter subsystem William Breathitt Gray 2018-05-16 17:50 ` William Breathitt Gray 2018-05-16 17:50 ` [PATCH v6 1/9] counter: Introduce the Generic Counter interface William Breathitt Gray 2018-05-16 17:50 ` William Breathitt Gray 2018-05-20 15:06 ` Jonathan Cameron 2018-05-20 15:06 ` Jonathan Cameron 2018-05-21 13:06 ` William Breathitt Gray 2018-05-21 13:06 ` William Breathitt Gray 2018-05-16 17:50 ` [PATCH v6 2/9] counter: Documentation: Add Generic Counter sysfs documentation William Breathitt Gray 2018-05-16 17:50 ` William Breathitt Gray 2018-05-20 15:12 ` Jonathan Cameron 2018-05-20 15:12 ` Jonathan Cameron 2018-05-16 17:51 ` [PATCH v6 3/9] docs: Add Generic Counter interface documentation William Breathitt Gray 2018-05-16 17:51 ` William Breathitt Gray 2018-05-19 15:30 ` kbuild test robot 2018-05-19 15:30 ` kbuild test robot 2018-05-19 15:30 ` kbuild test robot 2018-05-20 15:31 ` Jonathan Cameron 2018-05-20 15:31 ` Jonathan Cameron 2018-05-20 15:31 ` Jonathan Cameron 2018-05-21 13:47 ` William Breathitt Gray 2018-05-21 13:47 ` William Breathitt Gray 2018-05-22 17:08 ` Jonathan Cameron 2018-05-22 17:08 ` Jonathan Cameron 2018-05-25 9:26 ` Fabrice Gasnier 2018-05-25 9:26 ` Fabrice Gasnier 2018-05-25 9:26 ` Fabrice Gasnier 2018-05-25 13:00 ` William Breathitt Gray 2018-05-25 13:00 ` William Breathitt Gray 2018-05-16 17:51 ` [PATCH v6 4/9] counter: 104-quad-8: Add Generic Counter interface support William Breathitt Gray 2018-05-16 17:51 ` William Breathitt Gray 2018-05-19 13:16 ` kbuild test robot 2018-05-19 13:16 ` kbuild test robot 2018-05-19 13:16 ` kbuild test robot 2018-05-19 13:55 ` William Breathitt Gray 2018-05-19 13:55 ` William Breathitt Gray 2018-05-19 13:55 ` William Breathitt Gray 2018-05-19 13:16 ` [RFC PATCH] counter: 104-quad-8: quad8_ops can be static kbuild test robot 2018-05-19 13:16 ` kbuild test robot 2018-05-19 13:16 ` kbuild test robot 2018-05-20 15:42 ` [PATCH v6 4/9] counter: 104-quad-8: Add Generic Counter interface support Jonathan Cameron 2018-05-20 15:42 ` Jonathan Cameron 2018-05-21 13:51 ` William Breathitt Gray 2018-05-21 13:51 ` William Breathitt Gray 2018-05-16 17:51 ` [PATCH v6 5/9] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation William Breathitt Gray 2018-05-16 17:51 ` William Breathitt Gray 2018-05-16 17:51 ` [PATCH v6 6/9] dt-bindings: counter: Document stm32 quadrature encoder William Breathitt Gray 2018-05-16 17:51 ` William Breathitt Gray 2018-05-17 16:23 ` Rob Herring 2018-05-17 16:23 ` Rob Herring 2018-05-17 18:07 ` William Breathitt Gray 2018-05-17 18:07 ` William Breathitt Gray 2018-05-17 18:59 ` Benjamin Gaignard 2018-05-17 18:59 ` Benjamin Gaignard 2018-05-18 16:28 ` Rob Herring 2018-05-18 16:28 ` Rob Herring 2018-05-20 15:47 ` Jonathan Cameron 2018-05-20 15:47 ` Jonathan Cameron 2018-06-04 13:03 ` Benjamin Gaignard 2018-06-04 13:03 ` Benjamin Gaignard 2018-06-04 13:03 ` Benjamin Gaignard 2018-05-16 17:52 ` [PATCH v6 7/9] counter: Add STM32 Timer " William Breathitt Gray 2018-05-16 17:52 ` William Breathitt Gray 2018-05-16 17:52 ` [PATCH v6 8/9] counter: stm32-lptimer: add counter device William Breathitt Gray 2018-05-16 17:52 ` William Breathitt Gray 2018-05-18 16:34 ` Rob Herring 2018-05-18 16:34 ` Rob Herring 2018-05-16 17:52 ` William Breathitt Gray [this message] 2018-05-16 17:52 ` [PATCH v6 9/9] iio: counter: Remove IIO counter subdirectory William Breathitt Gray 2018-05-20 15:53 ` Jonathan Cameron 2018-05-20 15:53 ` Jonathan Cameron 2018-05-21 13:58 ` William Breathitt Gray 2018-05-21 13:58 ` William Breathitt Gray 2018-05-22 10:44 ` Jonathan Cameron 2018-05-22 10:44 ` Jonathan Cameron 2018-05-22 10:44 ` Jonathan Cameron
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=4c335e0eebfbaf6e86f41e0f2864d76993d90b13.1526487615.git.vilhelm.gray@gmail.com \ --to=vilhelm.gray@gmail.com \ --cc=benjamin.gaignard@st.com \ --cc=devicetree@vger.kernel.org \ --cc=fabrice.gasnier@st.com \ --cc=jic23@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.