From: Philipp Rossak <embed3d@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@bootlin.com, wens@csie.org, linux@armlinux.org.uk,
jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, eugen.hristev@microchip.com,
rdunlap@infradead.org, vilhelm.gray@gmail.com,
clabbe.montjoie@gmail.com, quentin.schulz@bootlin.com,
geert+renesas@glider.be, lukas@wunner.de, icenowy@aosc.io,
arnd@arndb.de, broonie@kernel.org, arnaud.pouliquen@st.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
Date: Thu, 30 Aug 2018 17:44:48 +0200 [thread overview]
Message-ID: <20180830154518.29507-1-embed3d@gmail.com> (raw)
Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored
version of the old Allwinner "GPADC" (although it have already only
thermal part left in A33).
This patch tried to add support for the sensor in H3 and A83T based on
This Patchtseries was in the beginning based on Icenowy Zengs v4 patchseries [1]. Since we decided to merge the mfd driver into the GPADC this changed. So only one patch could be reused.
Patches that adds support for H5, A64, A80 and H6 SoCs are allready prepared,
and will be upstreamed if this patchseries is applied and the testing is done.
Sorry for delaying this.
Regards,
Philipp
changes since v2:
* mfd driver is now merged into the gpadc driver
* complete rework
changes since v1:
* collecting all acks
* rewording commits/fix typos
* move code in place where it is used
* fix naming conventions of defines
* clarify commits
* update documentation to cover the new nvmem calibraion
* change nvmem calibration
Icenowy Zheng (1):
iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain
A33
Philipp Rossak (29):
mfd: Makefile: Remove build option for MFD:sun4i-gpadc
mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
iio: adc: Remove ID table
iio: adc: Kconfig: Update Kconfig to new build options
iio: adc: move SUN4I_GPADC_CHANNEL define to header file
iio: adc: remove ofnode options
iio: adc: remove mfd_probe & sunwi_irq_init function
iio: adc: remove hwmon structure
iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i
channel
iio: adc: rework irq and adc_channel handling
iio: adc: add new compatibles
mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
arm: config: Enable SUN4I_GPADC in defconfig
dt-bindings: update the Allwinner GPADC device tree binding for H3 &
A83T
iio: adc: sun4i-gpadc-iio: rework: readout temp_data
iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
ARM: dts: sun8i: h3: add support for the thermal sensor in H3
ARM: dts: sun8i: h3: add thermal zone to H3
ARM: dts: sun8i: h3: enable H3 sid controller
ARM: dts: sun8i: h3: use calibration for ths
ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
ARM: dts: sun8i: a83t: add thermal zone to A83T
ARM: sun8i: a83t: full range OPP tables and CPUfreq
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 143 +++++
arch/arm/boot/dts/sun8i-h3.dtsi | 52 ++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
arch/arm/configs/sunxi_defconfig | 1 +
drivers/iio/adc/Kconfig | 11 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 617 +++++++++++++--------
drivers/mfd/Kconfig | 17 -
drivers/mfd/Makefile | 1 -
drivers/mfd/sun4i-gpadc.c | 181 ------
include/linux/{mfd => iio/adc}/sun4i-gpadc.h | 47 +-
11 files changed, 681 insertions(+), 440 deletions(-)
delete mode 100644 drivers/mfd/sun4i-gpadc.c
rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%)
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
eugen.hristev-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org,
rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
quentin.schulz-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org,
geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org,
icenowy-h8G6r0blFSE@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
arnaud.pouliquen-qxv4g6HH51o@public.gmane.org
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
Date: Thu, 30 Aug 2018 17:44:48 +0200 [thread overview]
Message-ID: <20180830154518.29507-1-embed3d@gmail.com> (raw)
Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored
version of the old Allwinner "GPADC" (although it have already only
thermal part left in A33).
This patch tried to add support for the sensor in H3 and A83T based on
This Patchtseries was in the beginning based on Icenowy Zengs v4 patchseries [1]. Since we decided to merge the mfd driver into the GPADC this changed. So only one patch could be reused.
Patches that adds support for H5, A64, A80 and H6 SoCs are allready prepared,
and will be upstreamed if this patchseries is applied and the testing is done.
Sorry for delaying this.
Regards,
Philipp
changes since v2:
* mfd driver is now merged into the gpadc driver
* complete rework
changes since v1:
* collecting all acks
* rewording commits/fix typos
* move code in place where it is used
* fix naming conventions of defines
* clarify commits
* update documentation to cover the new nvmem calibraion
* change nvmem calibration
Icenowy Zheng (1):
iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain
A33
Philipp Rossak (29):
mfd: Makefile: Remove build option for MFD:sun4i-gpadc
mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
iio: adc: Remove ID table
iio: adc: Kconfig: Update Kconfig to new build options
iio: adc: move SUN4I_GPADC_CHANNEL define to header file
iio: adc: remove ofnode options
iio: adc: remove mfd_probe & sunwi_irq_init function
iio: adc: remove hwmon structure
iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i
channel
iio: adc: rework irq and adc_channel handling
iio: adc: add new compatibles
mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
arm: config: Enable SUN4I_GPADC in defconfig
dt-bindings: update the Allwinner GPADC device tree binding for H3 &
A83T
iio: adc: sun4i-gpadc-iio: rework: readout temp_data
iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
ARM: dts: sun8i: h3: add support for the thermal sensor in H3
ARM: dts: sun8i: h3: add thermal zone to H3
ARM: dts: sun8i: h3: enable H3 sid controller
ARM: dts: sun8i: h3: use calibration for ths
ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
ARM: dts: sun8i: a83t: add thermal zone to A83T
ARM: sun8i: a83t: full range OPP tables and CPUfreq
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 143 +++++
arch/arm/boot/dts/sun8i-h3.dtsi | 52 ++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
arch/arm/configs/sunxi_defconfig | 1 +
drivers/iio/adc/Kconfig | 11 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 617 +++++++++++++--------
drivers/mfd/Kconfig | 17 -
drivers/mfd/Makefile | 1 -
drivers/mfd/sun4i-gpadc.c | 181 ------
include/linux/{mfd => iio/adc}/sun4i-gpadc.h | 47 +-
11 files changed, 681 insertions(+), 440 deletions(-)
delete mode 100644 drivers/mfd/sun4i-gpadc.c
rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%)
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
Date: Thu, 30 Aug 2018 17:44:48 +0200 [thread overview]
Message-ID: <20180830154518.29507-1-embed3d@gmail.com> (raw)
Allwiner H3 and A83T SoCs have a thermal sensor, which is a large refactored
version of the old Allwinner "GPADC" (although it have already only
thermal part left in A33).
This patch tried to add support for the sensor in H3 and A83T based on
This Patchtseries was in the beginning based on Icenowy Zengs v4 patchseries [1]. Since we decided to merge the mfd driver into the GPADC this changed. So only one patch could be reused.
Patches that adds support for H5, A64, A80 and H6 SoCs are allready prepared,
and will be upstreamed if this patchseries is applied and the testing is done.
Sorry for delaying this.
Regards,
Philipp
changes since v2:
* mfd driver is now merged into the gpadc driver
* complete rework
changes since v1:
* collecting all acks
* rewording commits/fix typos
* move code in place where it is used
* fix naming conventions of defines
* clarify commits
* update documentation to cover the new nvmem calibraion
* change nvmem calibration
Icenowy Zheng (1):
iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain
A33
Philipp Rossak (29):
mfd: Makefile: Remove build option for MFD:sun4i-gpadc
mfd: Kconfig: Remove MFD_SUN4I_GPADC config option
iio: adc: Remove ID table
iio: adc: Kconfig: Update Kconfig to new build options
iio: adc: move SUN4I_GPADC_CHANNEL define to header file
iio: adc: remove ofnode options
iio: adc: remove mfd_probe & sunwi_irq_init function
iio: adc: remove hwmon structure
iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i
channel
iio: adc: rework irq and adc_channel handling
iio: adc: add new compatibles
mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/
arm: config: Enable SUN4I_GPADC in defconfig
dt-bindings: update the Allwinner GPADC device tree binding for H3 &
A83T
iio: adc: sun4i-gpadc-iio: rework: readout temp_data
iio: adc: sun4i-gpadc-iio: rework: support clocks and reset
iio: adc: sun4i-gpadc-iio: rework: support multiple sensors
iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data
iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume
iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
iio: adc: sun4i-gpadc-iio: add support for A83T thermal sensor
ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5
ARM: dts: sun8i: h3: add support for the thermal sensor in H3
ARM: dts: sun8i: h3: add thermal zone to H3
ARM: dts: sun8i: h3: enable H3 sid controller
ARM: dts: sun8i: h3: use calibration for ths
ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T
ARM: dts: sun8i: a83t: add thermal zone to A83T
ARM: sun8i: a83t: full range OPP tables and CPUfreq
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 143 +++++
arch/arm/boot/dts/sun8i-h3.dtsi | 52 ++
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 10 +
arch/arm/configs/sunxi_defconfig | 1 +
drivers/iio/adc/Kconfig | 11 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 617 +++++++++++++--------
drivers/mfd/Kconfig | 17 -
drivers/mfd/Makefile | 1 -
drivers/mfd/sun4i-gpadc.c | 181 ------
include/linux/{mfd => iio/adc}/sun4i-gpadc.h | 47 +-
11 files changed, 681 insertions(+), 440 deletions(-)
delete mode 100644 drivers/mfd/sun4i-gpadc.c
rename include/linux/{mfd => iio/adc}/sun4i-gpadc.h (72%)
--
2.11.0
next reply other threads:[~2018-08-30 15:48 UTC|newest]
Thread overview: 244+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 15:44 Philipp Rossak [this message]
2018-08-30 15:44 ` [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:25 ` Maxime Ripard
2018-08-31 8:25 ` Maxime Ripard
2018-08-31 8:25 ` Maxime Ripard
2018-09-02 19:58 ` Jonathan Cameron
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-09-02 19:58 ` Jonathan Cameron
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 03/30] iio: adc: Remove ID table Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:32 ` Maxime Ripard
2018-08-31 8:32 ` Maxime Ripard
2018-08-31 8:32 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-09-02 20:01 ` Jonathan Cameron
2018-09-02 20:01 ` Jonathan Cameron
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 17:28 ` Jonathan Cameron
2018-09-03 17:28 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 06/30] iio: adc: remove ofnode options Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 08/30] iio: adc: remove hwmon structure Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 16:40 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:40 ` Ondřej Jirman
2018-08-30 16:40 ` 'Ondřej Jirman' via linux-sunxi
2018-08-31 8:35 ` Maxime Ripard
2018-08-31 8:35 ` Maxime Ripard
2018-08-31 8:35 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:44 ` Maxime Ripard
2018-08-31 8:44 ` Maxime Ripard
2018-08-31 8:44 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 11/30] iio: adc: add new compatibles Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:46 ` Maxime Ripard
2018-08-31 8:46 ` Maxime Ripard
2018-08-31 8:46 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/ Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 8:48 ` Maxime Ripard
2018-08-31 8:48 ` Maxime Ripard
2018-08-31 8:48 ` Maxime Ripard
2018-09-10 19:44 ` Rob Herring
2018-09-10 19:44 ` Rob Herring
2018-09-10 19:44 ` Rob Herring
2018-09-11 9:12 ` Maxime Ripard
2018-09-11 9:12 ` Maxime Ripard
2018-09-11 9:12 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 8:50 ` Maxime Ripard
2018-08-31 8:50 ` Maxime Ripard
2018-08-31 8:50 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 17/30] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:03 ` Maxime Ripard
2018-08-31 9:03 ` Maxime Ripard
2018-08-31 9:03 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:05 ` Maxime Ripard
2018-08-31 9:05 ` Maxime Ripard
2018-08-31 9:05 ` Maxime Ripard
2018-09-02 20:11 ` Jonathan Cameron
2018-09-02 20:11 ` Jonathan Cameron
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 17:29 ` Jonathan Cameron
2018-09-03 17:29 ` Jonathan Cameron
2018-08-30 15:45 ` [PATCH v3 19/30] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:07 ` Maxime Ripard
2018-08-31 9:07 ` Maxime Ripard
2018-08-31 9:07 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 20/30] iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 12:05 ` Philipp Rossak
2018-08-31 12:05 ` Philipp Rossak
2018-08-31 12:05 ` Philipp Rossak
2018-09-03 9:44 ` Maxime Ripard
2018-09-03 9:44 ` Maxime Ripard
2018-09-03 9:44 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 16:27 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:27 ` Ondřej Jirman
2018-08-30 16:27 ` 'Ondřej Jirman' via linux-sunxi
2018-08-30 20:00 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:00 ` Philipp Rossak
2018-08-30 20:00 ` Philipp Rossak
2018-08-30 20:46 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:46 ` Philipp Rossak
2018-08-30 20:46 ` Philipp Rossak
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:51 ` Icenowy Zheng
2018-08-31 9:51 ` Icenowy Zheng
2018-08-31 11:58 ` [linux-sunxi] " Philipp Rossak
2018-08-31 11:58 ` Philipp Rossak
2018-08-31 11:58 ` Philipp Rossak
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 11:01 ` [linux-sunxi] " Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-05 14:58 ` Maxime Ripard
2018-09-05 14:58 ` Maxime Ripard
2018-09-05 14:58 ` Maxime Ripard
2018-08-31 12:01 ` Philipp Rossak
2018-08-31 12:01 ` Philipp Rossak
2018-08-31 12:01 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 22/30] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 23/30] ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 24/30] ARM: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:14 ` Maxime Ripard
2018-08-31 9:14 ` Maxime Ripard
2018-08-31 9:14 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-09-04 16:46 ` Emmanuel Vadot
2018-09-04 16:46 ` Emmanuel Vadot
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 12:04 ` [linux-sunxi] " Icenowy Zheng
2018-09-06 12:04 ` Icenowy Zheng
2018-09-06 12:04 ` Icenowy Zheng
2018-09-06 12:18 ` Philipp Rossak
2018-09-06 12:18 ` Philipp Rossak
2019-02-19 7:54 ` Allwinner SID THS calibration data cell representation? Chen-Yu Tsai
2019-02-20 14:55 ` Maxime Ripard
2019-02-20 14:55 ` Maxime Ripard
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-25 20:37 ` Philipp Rossak
2019-02-25 20:37 ` Philipp Rossak
2019-02-25 20:37 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 28/30] ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 29/30] ARM: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 30/30] ARM: sun8i: a83t: full range OPP tables and CPUfreq Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 16:38 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:38 ` Ondřej Jirman
2018-08-30 16:38 ` 'Ondřej Jirman' via linux-sunxi
2018-08-30 20:29 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:29 ` Philipp Rossak
2018-08-30 20:29 ` Philipp Rossak
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 12:06 ` Quentin Schulz
2018-09-06 12:06 ` Quentin Schulz
2018-09-06 12:06 ` Quentin Schulz
2019-03-19 12:30 ` [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Måns Rullgård
2019-03-19 12:30 ` Måns Rullgård
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 13:04 ` [linux-sunxi] " Chen-Yu Tsai
2019-03-19 13:04 ` Chen-Yu Tsai
2019-03-19 13:04 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180830154518.29507-1-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=arnaud.pouliquen@st.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=eugen.hristev@microchip.com \
--cc=geert+renesas@glider.be \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=lukas@wunner.de \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=pmeerw@pmeerw.net \
--cc=quentin.schulz@bootlin.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=vilhelm.gray@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.