From: Philipp Rossak <embed3d@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@bootlin.com, wens@csie.org, linux@armlinux.org.uk,
jic23@kernel.org, knaack.h@gmx.de, lars@metafoo.de,
pmeerw@pmeerw.net, eugen.hristev@microchip.com,
rdunlap@infradead.org, vilhelm.gray@gmail.com,
clabbe.montjoie@gmail.com, quentin.schulz@bootlin.com,
geert+renesas@glider.be, lukas@wunner.de, icenowy@aosc.io,
arnd@arndb.de, broonie@kernel.org, arnaud.pouliquen@st.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
Date: Thu, 30 Aug 2018 17:45:02 +0200 [thread overview]
Message-ID: <20180830154518.29507-15-embed3d@gmail.com> (raw)
In-Reply-To: <20180830154518.29507-1-embed3d@gmail.com>
Allwinner H3 features a thermal sensor like the one in A33, but has its
register re-arranged, the clock divider moved to CCU (originally the
clock divider is in ADC) and added a pair of bus clock and reset.
Allwinner A83T features a thermal sensor similar to the H3, the ths clock,
the bus clock and the reset was removed from the CCU. The THS in A83T
has a clock that is directly connected and runs with 24 MHz.
Update the binding document to cover H3 and A83T.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 ++++++++++++++++++++--
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
index a7ef9dd21f04..9116ad308cf1 100644
--- a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
@@ -4,12 +4,35 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller.
Required properties:
- - compatible: "allwinner,sun8i-a33-ths",
+ - compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a33-ths"
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
- reg: mmio address range of the chip,
- - #thermal-sensor-cells: shall be 0,
+ - #thermal-sensor-cells:
+ Please refer <devicetree/bindings/thermal/thermal.txt>,
- #io-channel-cells: shall be 0,
-Example:
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - interrupts: the sampling interrupt of the ADC,
+
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - clocks: the bus clock and the input clock of the ADC,
+ - clock-names: should be "bus" and "mod",
+ - resets: the bus reset of the ADC,
+
+Optional properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - nvmem-cells: A phandle to the calibration data provided by a nvmem device.
+ - nvmem-cell-names: Should be "calibration".
+
+Details see: bindings/nvmem/nvmem.txt
+
+Example for A33:
ths: ths@1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
@@ -17,6 +40,18 @@ Example:
#io-channel-cells = <0>;
};
+Example for H3:
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_THS>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+
sun4i, sun5i and sun6i SoCs are also supported via these bindings:
Required properties:
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
knaack.h-Mmb7MZpHnFY@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
eugen.hristev-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org,
rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
vilhelm.gray-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
quentin.schulz-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org,
geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org,
icenowy-h8G6r0blFSE@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
arnaud.pouliquen-qxv4g6HH51o@public.gmane.org
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
Date: Thu, 30 Aug 2018 17:45:02 +0200 [thread overview]
Message-ID: <20180830154518.29507-15-embed3d@gmail.com> (raw)
In-Reply-To: <20180830154518.29507-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Allwinner H3 features a thermal sensor like the one in A33, but has its
register re-arranged, the clock divider moved to CCU (originally the
clock divider is in ADC) and added a pair of bus clock and reset.
Allwinner A83T features a thermal sensor similar to the H3, the ths clock,
the bus clock and the reset was removed from the CCU. The THS in A83T
has a clock that is directly connected and runs with 24 MHz.
Update the binding document to cover H3 and A83T.
Signed-off-by: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 ++++++++++++++++++++--
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
index a7ef9dd21f04..9116ad308cf1 100644
--- a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
@@ -4,12 +4,35 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller.
Required properties:
- - compatible: "allwinner,sun8i-a33-ths",
+ - compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a33-ths"
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
- reg: mmio address range of the chip,
- - #thermal-sensor-cells: shall be 0,
+ - #thermal-sensor-cells:
+ Please refer <devicetree/bindings/thermal/thermal.txt>,
- #io-channel-cells: shall be 0,
-Example:
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - interrupts: the sampling interrupt of the ADC,
+
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - clocks: the bus clock and the input clock of the ADC,
+ - clock-names: should be "bus" and "mod",
+ - resets: the bus reset of the ADC,
+
+Optional properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - nvmem-cells: A phandle to the calibration data provided by a nvmem device.
+ - nvmem-cell-names: Should be "calibration".
+
+Details see: bindings/nvmem/nvmem.txt
+
+Example for A33:
ths: ths@1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
@@ -17,6 +40,18 @@ Example:
#io-channel-cells = <0>;
};
+Example for H3:
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_THS>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+
sun4i, sun5i and sun6i SoCs are also supported via these bindings:
Required properties:
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T
Date: Thu, 30 Aug 2018 17:45:02 +0200 [thread overview]
Message-ID: <20180830154518.29507-15-embed3d@gmail.com> (raw)
In-Reply-To: <20180830154518.29507-1-embed3d@gmail.com>
Allwinner H3 features a thermal sensor like the one in A33, but has its
register re-arranged, the clock divider moved to CCU (originally the
clock divider is in ADC) and added a pair of bus clock and reset.
Allwinner A83T features a thermal sensor similar to the H3, the ths clock,
the bus clock and the reset was removed from the CCU. The THS in A83T
has a clock that is directly connected and runs with 24 MHz.
Update the binding document to cover H3 and A83T.
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
---
.../devicetree/bindings/iio/adc/sun4i-gpadc.txt | 41 ++++++++++++++++++++--
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
index a7ef9dd21f04..9116ad308cf1 100644
--- a/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sun4i-gpadc.txt
@@ -4,12 +4,35 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
and sometimes as a touchscreen controller.
Required properties:
- - compatible: "allwinner,sun8i-a33-ths",
+ - compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a33-ths"
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
- reg: mmio address range of the chip,
- - #thermal-sensor-cells: shall be 0,
+ - #thermal-sensor-cells:
+ Please refer <devicetree/bindings/thermal/thermal.txt>,
- #io-channel-cells: shall be 0,
-Example:
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - interrupts: the sampling interrupt of the ADC,
+
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - clocks: the bus clock and the input clock of the ADC,
+ - clock-names: should be "bus" and "mod",
+ - resets: the bus reset of the ADC,
+
+Optional properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - "allwinner,sun8i-a83t-ths"
+ - nvmem-cells: A phandle to the calibration data provided by a nvmem device.
+ - nvmem-cell-names: Should be "calibration".
+
+Details see: bindings/nvmem/nvmem.txt
+
+Example for A33:
ths: ths at 1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
@@ -17,6 +40,18 @@ Example:
#io-channel-cells = <0>;
};
+Example for H3:
+ ths: thermal-sensor at 1c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_THS>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+
sun4i, sun5i and sun6i SoCs are also supported via these bindings:
Required properties:
--
2.11.0
next prev parent reply other threads:[~2018-08-30 15:45 UTC|newest]
Thread overview: 244+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-30 15:44 [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 01/30] mfd: Makefile: Remove build option for MFD:sun4i-gpadc Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:25 ` Maxime Ripard
2018-08-31 8:25 ` Maxime Ripard
2018-08-31 8:25 ` Maxime Ripard
2018-09-02 19:58 ` Jonathan Cameron
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 02/30] mfd: Kconfig: Remove MFD_SUN4I_GPADC config option Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-09-02 19:58 ` Jonathan Cameron
2018-09-02 19:58 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 03/30] iio: adc: Remove ID table Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 04/30] iio: adc: Kconfig: Update Kconfig to new build options Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:32 ` Maxime Ripard
2018-08-31 8:32 ` Maxime Ripard
2018-08-31 8:32 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 05/30] iio: adc: move SUN4I_GPADC_CHANNEL define to header file Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-09-02 20:01 ` Jonathan Cameron
2018-09-02 20:01 ` Jonathan Cameron
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 14:24 ` Philipp Rossak
2018-09-03 17:28 ` Jonathan Cameron
2018-09-03 17:28 ` Jonathan Cameron
2018-08-30 15:44 ` [PATCH v3 06/30] iio: adc: remove ofnode options Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` [PATCH v3 07/30] iio: adc: remove mfd_probe & sunwi_irq_init function Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 08/30] iio: adc: remove hwmon structure Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-31 8:34 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 09/30] iio: adc: Threat A33 as thermal sensor and remove non thermal sun4i channel Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 16:40 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:40 ` Ondřej Jirman
2018-08-30 16:40 ` 'Ondřej Jirman' via linux-sunxi
2018-08-31 8:35 ` Maxime Ripard
2018-08-31 8:35 ` Maxime Ripard
2018-08-31 8:35 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 10/30] iio: adc: rework irq and adc_channel handling Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:44 ` Maxime Ripard
2018-08-31 8:44 ` Maxime Ripard
2018-08-31 8:44 ` Maxime Ripard
2018-08-30 15:44 ` [PATCH v3 11/30] iio: adc: add new compatibles Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-30 15:44 ` Philipp Rossak
2018-08-31 8:46 ` Maxime Ripard
2018-08-31 8:46 ` Maxime Ripard
2018-08-31 8:46 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 12/30] mfd: Remove old mfd driver & Move sun4i-gpadc.h to iio/adc/ Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 13/30] arm: config: Enable SUN4I_GPADC in defconfig Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak [this message]
2018-08-30 15:45 ` [PATCH v3 14/30] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 8:48 ` Maxime Ripard
2018-08-31 8:48 ` Maxime Ripard
2018-08-31 8:48 ` Maxime Ripard
2018-09-10 19:44 ` Rob Herring
2018-09-10 19:44 ` Rob Herring
2018-09-10 19:44 ` Rob Herring
2018-09-11 9:12 ` Maxime Ripard
2018-09-11 9:12 ` Maxime Ripard
2018-09-11 9:12 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 15/30] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 16/30] iio: adc: sun4i-gpadc-iio: rework: readout temp_data Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 8:50 ` Maxime Ripard
2018-08-31 8:50 ` Maxime Ripard
2018-08-31 8:50 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 17/30] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:03 ` Maxime Ripard
2018-08-31 9:03 ` Maxime Ripard
2018-08-31 9:03 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 18/30] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:05 ` Maxime Ripard
2018-08-31 9:05 ` Maxime Ripard
2018-08-31 9:05 ` Maxime Ripard
2018-09-02 20:11 ` Jonathan Cameron
2018-09-02 20:11 ` Jonathan Cameron
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 13:58 ` Philipp Rossak
2018-09-03 17:29 ` Jonathan Cameron
2018-09-03 17:29 ` Jonathan Cameron
2018-08-30 15:45 ` [PATCH v3 19/30] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:07 ` Maxime Ripard
2018-08-31 9:07 ` Maxime Ripard
2018-08-31 9:07 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 20/30] iio: adc: sun4i-gpadc-iio: rework: device specific suspend & resume Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 9:09 ` Maxime Ripard
2018-08-31 12:05 ` Philipp Rossak
2018-08-31 12:05 ` Philipp Rossak
2018-08-31 12:05 ` Philipp Rossak
2018-09-03 9:44 ` Maxime Ripard
2018-09-03 9:44 ` Maxime Ripard
2018-09-03 9:44 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 16:27 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:27 ` Ondřej Jirman
2018-08-30 16:27 ` 'Ondřej Jirman' via linux-sunxi
2018-08-30 20:00 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:00 ` Philipp Rossak
2018-08-30 20:00 ` Philipp Rossak
2018-08-30 20:46 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:46 ` Philipp Rossak
2018-08-30 20:46 ` Philipp Rossak
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:11 ` Maxime Ripard
2018-08-31 9:51 ` Icenowy Zheng
2018-08-31 9:51 ` Icenowy Zheng
2018-08-31 11:58 ` [linux-sunxi] " Philipp Rossak
2018-08-31 11:58 ` Philipp Rossak
2018-08-31 11:58 ` Philipp Rossak
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 10:20 ` Maxime Ripard
2018-09-03 11:01 ` [linux-sunxi] " Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-03 11:01 ` Icenowy Zheng
2018-09-05 14:58 ` Maxime Ripard
2018-09-05 14:58 ` Maxime Ripard
2018-09-05 14:58 ` Maxime Ripard
2018-08-31 12:01 ` Philipp Rossak
2018-08-31 12:01 ` Philipp Rossak
2018-08-31 12:01 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 22/30] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 23/30] ARM: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 24/30] ARM: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 25/30] ARM: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-31 9:14 ` Maxime Ripard
2018-08-31 9:14 ` Maxime Ripard
2018-08-31 9:14 ` Maxime Ripard
2018-08-30 15:45 ` [PATCH v3 26/30] ARM: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 27/30] ARM: dts: sun8i: h3: use calibration for ths Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-09-04 16:46 ` Emmanuel Vadot
2018-09-04 16:46 ` Emmanuel Vadot
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:47 ` Philipp Rossak
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 11:51 ` Maxime Ripard
2018-09-06 12:04 ` [linux-sunxi] " Icenowy Zheng
2018-09-06 12:04 ` Icenowy Zheng
2018-09-06 12:04 ` Icenowy Zheng
2018-09-06 12:18 ` Philipp Rossak
2018-09-06 12:18 ` Philipp Rossak
2019-02-19 7:54 ` Allwinner SID THS calibration data cell representation? Chen-Yu Tsai
2019-02-20 14:55 ` Maxime Ripard
2019-02-20 14:55 ` Maxime Ripard
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-21 10:10 ` Emmanuel Vadot
2019-02-25 20:37 ` Philipp Rossak
2019-02-25 20:37 ` Philipp Rossak
2019-02-25 20:37 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 28/30] ARM: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 29/30] ARM: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 15:45 ` [PATCH v3 30/30] ARM: sun8i: a83t: full range OPP tables and CPUfreq Philipp Rossak
2018-08-30 15:45 ` Philipp Rossak
2018-08-30 16:38 ` [linux-sunxi] " Ondřej Jirman
2018-08-30 16:38 ` Ondřej Jirman
2018-08-30 16:38 ` 'Ondřej Jirman' via linux-sunxi
2018-08-30 20:29 ` [linux-sunxi] " Philipp Rossak
2018-08-30 20:29 ` Philipp Rossak
2018-08-30 20:29 ` Philipp Rossak
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 7:24 ` Quentin Schulz
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:39 ` Philipp Rossak
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 11:42 ` Maxime Ripard
2018-09-06 12:06 ` Quentin Schulz
2018-09-06 12:06 ` Quentin Schulz
2018-09-06 12:06 ` Quentin Schulz
2019-03-19 12:30 ` [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Måns Rullgård
2019-03-19 12:30 ` Måns Rullgård
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 12:37 ` Maxime Ripard
2019-03-19 13:04 ` [linux-sunxi] " Chen-Yu Tsai
2019-03-19 13:04 ` Chen-Yu Tsai
2019-03-19 13:04 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180830154518.29507-15-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=arnaud.pouliquen@st.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=eugen.hristev@microchip.com \
--cc=geert+renesas@glider.be \
--cc=icenowy@aosc.io \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=lukas@wunner.de \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=pmeerw@pmeerw.net \
--cc=quentin.schulz@bootlin.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=vilhelm.gray@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.