From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux
Date: Thu, 1 Nov 2018 00:06:31 +0530 [thread overview]
Message-ID: <20181031183634.29640-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181031183634.29640-1-jagan@amarulasolutions.com>
MMC1 controlled is already added, but mmc1 pinmux would
need to function SDIO.
So, add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 040828d2e2c0..3b9da12e65db 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -157,6 +157,14 @@
bias-pull-up;
};
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Cc: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux
Date: Thu, 1 Nov 2018 00:06:31 +0530 [thread overview]
Message-ID: <20181031183634.29640-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181031183634.29640-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
MMC1 controlled is already added, but mmc1 pinmux would
need to function SDIO.
So, add support for it.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 040828d2e2c0..3b9da12e65db 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -157,6 +157,14 @@
bias-pull-up;
};
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: jagan@amarulasolutions.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux
Date: Thu, 1 Nov 2018 00:06:31 +0530 [thread overview]
Message-ID: <20181031183634.29640-4-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181031183634.29640-1-jagan@amarulasolutions.com>
MMC1 controlled is already added, but mmc1 pinmux would
need to function SDIO.
So, add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 040828d2e2c0..3b9da12e65db 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -157,6 +157,14 @@
bias-pull-up;
};
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-10-31 18:37 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 18:36 [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` [PATCH 2/7] arm64: allwinner: h6: Add common orangepi nodes into dtsi Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 2:53 ` Chen-Yu Tsai
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:13 ` Jagan Teki
2018-11-01 7:20 ` Chen-Yu Tsai
2018-11-01 7:20 ` Chen-Yu Tsai
2018-11-01 7:20 ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 3/7] arm64: allwinner: h6: Add OrangePi Lite2 initial support Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki [this message]
2018-10-31 18:36 ` [PATCH 4/7] arm64: allwinner: h6: Add MMC1 pinmux Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` [PATCH 5/7] arm64: allwinner: h6: Add RTC node Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 2:55 ` Chen-Yu Tsai
2018-11-01 7:33 ` Jagan Teki
2018-11-01 7:33 ` Jagan Teki
2018-11-01 7:33 ` Jagan Teki
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 7:53 ` Chen-Yu Tsai
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:02 ` Jagan Teki
2018-11-01 9:35 ` Chen-Yu Tsai
2018-11-01 9:35 ` Chen-Yu Tsai
2018-11-01 9:35 ` Chen-Yu Tsai
2018-10-31 18:36 ` [PATCH 6/7] arm64: allwinner: h6: Add RTC clock to phandle 32kHz external oscillator Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 2:57 ` Chen-Yu Tsai
2018-11-01 2:57 ` Chen-Yu Tsai
2018-11-01 2:57 ` Chen-Yu Tsai
2018-10-31 18:36 ` [RFC PATCH 7/7] arm64: allwinner: h6: orangepi-liet2: Enable AP6356S WiFi support Jagan Teki
2018-10-31 18:36 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:35 ` Jagan Teki
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 7:58 ` Chen-Yu Tsai
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:08 ` Jagan Teki
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-01 9:49 ` Chen-Yu Tsai
2018-11-05 8:41 ` [PATCH 1/7] clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width Maxime Ripard
2018-11-05 8:41 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031183634.29640-4-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.